Order highlighted when product view is called.

Hi All,
In APO , We have one custom report which display all orders. By clicking on order number , it displays its product view. Here , product view contains many orders so it would become little tedious to find that order from long list.
Is there any way that product view is called with order number being highlighted so it become very easy to locate.
Rer,
Prashant

We have created custom interactive report which shows orders based on plant and product mentioned on selection screen. Here , if we click on any order within report , its product view is getting called. I am able to call product view but if there are many orders for that product location then it one has to search order number in product view. We need somehow if we click on order number within custom report , product view should be called with order number being highlited in product view ( in blue text ) so that user would know by which order number this product view was called.
I am calling call transaction "/SAPAPO/RRP*" from my custom report , here product view is getting called but I need to search order number ( need to remember order number while clikcing ) from long list in product view.
Does any on know any fucntion module or any way to highlight order number when product view is called.

Similar Messages

Missing Process order components in product View

Dear all,
We have a problem with Process order in APO.
We have created a planned order in APO and converted to process order . All the components of the order are APO relevant and PPM is having all the components . When We create the planned order , RRP3 is showing all the components but when we convert the planned order to process order , then the components are missing in product view . But all the components are available in Process order in ECC . We deleted the process order in APO and again CIF the order from ECC to APO , but still the components are not appearing . We need to have all the components of the order to plan the dependent demands.
We checked the Queues and found no blocked queues .
Can any one suggest me what could be the problem.
Thanks & Regards
Prabhakar

Hi Prabhakar,
How are you integrating your production order - like are you sending the planned order to ECC and convert there or you are not transferring the planned order to ECC, but setting the conversion indicator in APO?
If you don't integrate the planned order to ECC, then all the components will be displayed in APOby exploding APO PDS - no active integration model required for components.
If you integrate the planned order to ECC, then in ECC, the BOM explosion happens. - So, active integration model required.
Regards,
Manimaran M.

Sales order appear in Product view but not available in Livecache

Dear Gurus,
We have an issue right now wherein there is a sales order with a certain line item that is consuming stock in ATP tab of product view but in Elements tab of the same material, the Sales Order is not seen. Because of this, some orders cannot be confirmed as the stock is not sufficient
We have tried /SAPAPO/OM17, SDRQCR21, and /SAPAPO/SDORDER_DEL to delete the Sales Order but no Sales Order is being selected.
Kindly let me know if there are other reports or process to be done to delete this inconsistency.
Thank you in advance,
Raymond

Hi
Go to transaction /sapapo/mvm go to the active version and check under ATP whether update fro, atp time series is checked. If not then to do atp check in apo you wud need to delete the active version and recreate it with the required setting.
Regards
Rajiv

Copy purchase order text to production order text

Hello,
purchase order text should be copied to production order text so that the end user can see and edit the text before saving the production order. I'm trying to do it with exit PPCO0006. I can read the purchase order text with read_text but cannot show it on prod order long text tab page. And cannot save it because the production order does not have a number yet.
How should this be done? If I copy the text to clipboard can it be pasted to production order long text somehow? Or is there a long text object in production order which I could call and insert the text in it? Or what?

Hi,
The problem is solved.
In SD side, there's a transaction VOTXN. Change the configuration for Sales Order Item.
Add a Text ID 0006 (Production Memo) in Textprocedure with Access Sequence 21 (Material Sales).
In Access Sequence 21, map Text Object VBBP (Sales Order Item Text) to ID 0006 (Production Memo).
Save it.
When you create your sales order, in the item text level, you'll be able to see an additional text type of Production Memo. Enter your text here and save the sales order. When production order for this Sales Order is created, Production Memo tab will automatically appear (as mentioned by Peter earlier).
Thanks.

Sales Order Text to Production Order Text

Dear Experts,
When creating a sales order in VA01, I added in some comments in the item level Texts tab.
How can I configure the system so that when a production order is created from this sales order, the comments entered in the sales order will be automatically populated in the Long Text tab of Production Order header.
This is because during the creation of sales order, there may be certain comments and/or instructions that need to be passed to the production line. We want the texts to flow through to the production order automatically.
Any ideas?
Thanks in advance.

Hi,
The problem is solved.
In SD side, there's a transaction VOTXN. Change the configuration for Sales Order Item.
Add a Text ID 0006 (Production Memo) in Textprocedure with Access Sequence 21 (Material Sales).
In Access Sequence 21, map Text Object VBBP (Sales Order Item Text) to ID 0006 (Production Memo).
Save it.
When you create your sales order, in the item text level, you'll be able to see an additional text type of Production Memo. Enter your text here and save the sales order. When production order for this Sales Order is created, Production Memo tab will automatically appear (as mentioned by Peter earlier).
Thanks.

Distr. Key GLEI in Prod. order not getting reflected in SCM product view

Hi,
We have the CIF integration model active to transfer production orders from R/3 to SCM-APO.
When we create a production order in R/3 it is getting transferred over to SCM and can be seen in Product view for the material-plant combination.
If we have the distribution key as GLEI on the production order in R/3, and we looked at stock requirements list-MD04 the receipts were split across evenly from the start date to the end date of the production order.
However, in the product view of SCM, the material was shown as available only at the end date of the production order with the full quantity.
Please provide any pointers as to something we might have missed out that made the CIF'ing not work properly...
Thanks & Regards,
Renjith John Andrews

Hi Renjith
Yes I do mean the Production Process Model. To check setting you need to do the following:
Transaction /sapapo/scc03
Click on choose plan via PPM and enter your material and location and press change.
Double click your operation
Double-click your activity
On the components tab you should see your "Output" material (Type O in I/O Indicator field), next to this should be the consumption indicator field. This is the one that has to be set to 'C'.
Hope this helps.
Regards
Ian

Planned orders are created when Production order is open

Hi Everyone
We have Make order and Make to stock scenarios in the system for various products. When Production order is still open ( Fully confirmed with C015 and partially delivered), system assuming that order is completed and created a new planned order for the undelivered quantity against Sales order.
As per my knowledge MRP shouldn't create new planned orders when old production order is still incomplete. The old production order has status REL, PDLV and CNF.
Any help is appreciate and it is our production issue
Regards
Prasad

Hi,
is the order marked as completely delivered on the Warehouse view? Have you reached the under delivery tolerance for this order with your partial delivery from production? If yes, this would be the reason why the system thinks that a new order is required
Regards
Thomas

Error while creating planned order in product view

I am getting following error when I try to create planned order for a product in a Location manually in product view using /SAPAPO/RRP5.
Error occurred while creating order
Message no. /SAPAPO/RRP251
I checked the product and resource. Everything looks good.
Block is available in the resource WMP1_2041_001 for characteristics specified in planned order.
Product master and PDS look good.
In the planning log, I see the following error message.
Plan explosion failed for product LBRA1050-661 in location 2041
Message no. /SAPAPO/RRP718
I have not found SAP notes for above error.
Can you pl let me know what this is due to?
Thanks,
Srini

Srini,
The message was created as a result of several notes, such as 1582997. There are others.
The implication is that you have an invalid source somewhere in your BOM. Maybe a bad component part, maybe a bad transportation lane, maybe an invalid BOM, or maybe a bad PPM/PDS.
If you can't find the problem using logical troubleshooting steps, have one of your programmers debug. Have him put breakpoints in FM /SAPAPO/RRP_PLORD_CREATE . If you are particularly lucky, you will find a developer that understands German, because all the internal comments in this FM are in German.
Best regards,
DB49

Release order for a stock transfer order in Product view

Hi Experts
My question is that i cann't see Release order for a stock transfer order in Product view which are available in MD04 in R/3.
I have checked all the settings for Strategy group 50-Planning without final assembly in R/3 and Requirement type in APO. In APO I have checked requirement type and category group and I can see that in category we have defined Stock Transport Requisition, Stock Transport order, Sales Order, TLB:VMI sales order, Replenishment delivery and VMI delivery as category.
One more thing i am not even selecting any selection profile for Product view.
What i need to check, Kindly suggest.
Regards
G C

Hi G.C
Check whether you have maintained correct integration model. Create integration model for transactional data. Select the sales order and PO/PR option in CFM1. The reason you need to send the sales order first when you are working with stock transfer order/stock transfer scheduling agreements you first have to send the sales order and then PO/PR. Activate the integrtion model.
First check in ECC for the Integration with Other mySAP.com Components==>Advanced Planning and Optimization==>Initial Data Transfer==>Change Transfer==>Change Transfer for Transaction Data==>Activate Online Transfer Using BTE==> here check (ND-APO, NDI options are have been checked)
Also check for the Maintenance of distribution definiton under APO -SPRO==>Integration with SAP Components==>Basic settings for data transfer==>Publication==>Maintain distribution definiton==>Select the publication type(External procurement, Delivery,Shipment) and assign to all the plants you are working with for STO.
Try the above steps and do let me know if it worked.
Regards
KRN

101 movement not happening when production order got backflushed.

HI SAP Gurus,
For SKU 101 movement not happening when production order got backflushed, but 261 movement successfully happened. Please let us know any settings need to check?
Thanks and Regards,
SHARAN.

Hi Sharan,
A 101 movement for the production order takes place when
- You receive the production order via MB31
or
- Confirm the last operation which has PP03 control key
A backflush is done only for the components called by the production order & not for the header material.
Hope the above answers your query.
Regards,
Vivek

How to block production order creation when maintenance order is generated.

Hi All,
Kindly share how to block production order generation when maintenance order is generated.

Integration between PP module and PM module
PP/PM Workcenter Integration
There are many threads & documents available. Please do some search.

How to stop the prodution order creating when the product is not valued?

Hi guyes:
How to stop the prodution order creating when the product is not valued using CO01?
I hope that when i create the production order,the system will check the product is valued or not,if not
the system will show an error or warning message!
How to config for this?
Thank you!

Dear Zhao Gang,
Check with this user Exits mentioned in this link,
Prevent Production Order from "Release" if there is no Cost Estimate
Re: User Exit at Production Order Release
Check and revert back.
Regards
Mangalraj.S

Error on Production Server when php service is called.

The web application runs fine on my development machine but on the production server it gives me the following error and no responce when a phpservice is called.
error:
Send failed
Channel.Connect.Failed error NetConnection.Call.BadVersion: : url:
'http://ipaddress/Project/public/gateway.php'
Network Monitor:
Development Machine:
Windows 7
MySQL 5.5.16
Zend Framework 1.10
Production Machine:
Ubuntu 11.10
MySQL 5.1.58
Zend Framework 1.11
I followed the following steps to deploy the application on production server;
1. created identical database with same credentials on the production server
2. confirmed that my php service works on the server by manually navigating to the php file and printing the data retrieved on the page
3. modified the paths in amf_config.ini to reflect production server
[zend]
webroot = "/var/www"
zend_path ="/usr/local/zend/share/ZendFramework/library"
library ="/var/www/Project/library"
services ="/var/www/Project/services"
[zendamf]
amf.production = true
amf.directories[]=Project/services
4. initialized the class by adding
// Initialization customization goes here
_serviceControl.endpoint = "http://ipaddress/Project/public/gateway.php";
in the .as file for the php service
I have also found from my zend server logs that when my php service is called its throws the following error:
PHP Notice: Undefined index: HTTPS in /usr/local/zend/share/ZendFramework/library/Zend/Amf/Response/Http.php on line 59
I doubt that there is anything wrong in the deployment process but please do let me know if you could think of something i might have missed.
The other thing im wondering is the php notice if it were to be caused due to different Zend Framework versions!
Kindly advice

EGJ Steens has post a fix at http://forums.adobe.com/message/4097998#4097998#4097998/Using Flash Builder
Zend framework 1.11 added an extra function in the Http.php file (which was mentioned in the post) and was fixed as follows
protected function isIeOverSsl()
        $_SERVER['HTTPS'] = 'off'; //Adding this line fixed the issue
        $ssl = $_SERVER['HTTPS'];
        if (!$ssl || ($ssl == 'off')) {
            // IIS reports "off", whereas other browsers simply don't populate
            return false;
        $ua = $_SERVER['HTTP_USER_AGENT'];
        if (!preg_match('/; MSIE \d+\.\d+;/', $ua)) {
            // Not MicroSoft Internet Explorer
            return false;
        return true;
My concern is if i wish to secure my application with ssl using HTTPS will this prevent me from doing so.
Any Pointers Anybody?

Sort order switches when changing from List to Thumbnail View

I can't seem to get the Thumbnail view to "lock" to the same sort order as the list view. I arrange by file name (or ingest date, or reverse media duration, or any of the other sortable metadata fields) in list view, but then when I click to the thumbnail view, the order seems to arbitrariliy change to some sort of preset. What's worse, it appears to be changing to something that's in a jumbled order.
This isn't a big deal if I only have 10 clips. If I have 100, or 1,000 clips though, they have to be in a sortable order for the thumbnail view to be of any use.
Thanks,
Eli

Hi,
Thanks for your post. Our current design doesn't support keeping order between list view and icon view. It would be good if you can drop that as a feature request / bug into the the forum.

Determination of Production Order Type when Planned Order is Converted

Hi SAP Expert,
Is there anyway to determine the Production Order type by Sales Order type when the planned order from APO is converted? Currently, all the planned orders converted from APO will be a Normal Production Order.
The requirement as example below:
>> If Sales Order Type = Normal Sales Order, then the converted Production Order type = Normal Production Order
>> If Sales Order Type = Replacement Sales Order, then the converted Production Order type = Rework Production Order
Thanks.
Regards,
Hooi Chia

Hi Pascal,
Our requirement is exactly same as yours. Can you please elaborate more on ZXCOXU13? I can see the function module suggested by Santosh in the SAP Note but I couldn't find any details regarding ZXCOXU13.
Thanks.
Regards,
Hooi Chia

Order highlighted when product view is called.

Similar Messages

Maybe you are looking for