Order qty and total confirmed qty in PI sheets

Dear Experts,
Kindly suggest the possibility of appearing total order qty and already confirmed qty in the PI sheet, system useually provides the same while performing confirmation through co11n or cor6.
Thanks in advance for your help..
Regards,
Nitish

Hi Srini,
The following details are available in the table AFVV,
Standard value, operation qty & Base qty.
With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
The actual/confirmed hours are available in the table AFRU.
Regards,
Senthilkumar

Similar Messages

  • Posting differeences between GR qty and TO confirmation qty

    dear experts,
    my scenario is of STO. I am transfering material from one plant to Central warehouse for which i have created a STPO of 50 qty  at central warehouse. w.r.t. STPO I did delivery from issuing plant followed by picking of 50 qty. Then I did MIGO at receiving plant of 50 qty. and a TO gets created automatically. I confirm this TO at the time of actual placing of material in the bin. at the time of placing the material actually in the bin I found that there was shortage in material by 10 pcs so I confirmed my TO only for 40 pcs. now in PO purchase order history it shows GR of 50 qty and in TO 40 qty. how to post the difference. will it reflect in inventory management level also. how?
    your help will highly appreciated.
    thanks
    ujwal

    Hi,
    When you post the differences while confirming the TO, the differences will be moved to 999 storage type.You have to clear the differences at IM level.You would also need to inform your purchasing department about updating the PO for 40 qty as received.
    Thanks

  • GR Qty greater than Confirmed Qty

    Hi All,
    We have created Purchase order with Internal order as account assignment. When ever we are doing MIGO, System is giving the error " GR Qty greater than Confirmed Qty".
    Please help.
    Thanks
    Subrato

    >
    Subrato Chowdhury wrote:
    > The MIGO is happening whenever we are deattaching the internal order. The PO Quantity is same MIGO Quantity.
    Can you expalin more this line whenever we are deattaching the internal order ?

  • Difference between ATP qty and cumulative ATP qty

    Can anyone advise what's the difference between ATP qty and cumulative ATP qty with examples?
    Thanks
    Peter

    Hi Peter,
    ATP quantity
    The quantity available to MRP for new sales orders.
    The ATP (Available-to-promise) quantity is calculated according to the following formula:
    ATP quantity = warehouse stock + planned receipts - planned issues.
    Please go through this link you can able to have idea on cumulative ATP
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/55ff72545a11d1a7020000e829fd11/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • ATP check for materials and ATP Confirmed Qty's

    Good morning,
    I have a question regarding the ATP.
    If I have a 100 of box a in stock and I have 2 Planned Orders for 75 (total req on box is 150).
    When I convert the first Planned Ord to a Prodution Ord, the ATP check will run and confirm that I have the 75 boxes required (as we want it), but if I then convert the second Planned Order I would expect the ATP to say that only 25 is available, but it is also telling me that the 75 boxes required are available.
    Can I set the ATP to confirm/allocate the first 75 boxes to the first Production Order and when the second order runs ATP to only commit to 25?
    Thanks in advance.
    ATP novice :o)

    Hi Guy Hall,
    Please check with, "include dependent reservation and production order" has been activated for  checking rule used for production order at "avilabilty checking scope"
    Regards
    Pradeep

  • Table for total planned hrs and total confirmed hrs in prodution order

    Hi guys,
    I am creating a report for which i need total planned hrs (set up + machine + any other) and confirmed hrs.
    For eg., a production order has 10 qty. Standard values are Set up time is 20 min and machine time 5 min for a base quantitiy of 1. So here the planned hrs are 20 + (5*10) = 70 min.
    In which table can i find this planned hrs. I can see the standard value in AFVV table. But what logic can i use for calculating the total planned hrs.
    Is there any function module for this ?
    Thanks
    Srini

    Hi Srini,
    The following details are available in the table AFVV,
    Standard value, operation qty & Base qty.
    With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
    The actual/confirmed hours are available in the table AFRU.
    Regards,
    Senthilkumar

  • Including "Total Stock Qty" and "Total Stock Value" in Slow movingitm Query

    Dear Guys,
                    Regards.I am using the standard "Slow moving Item's Query" based upon the "Slow moving item Multiprovider".The Query design is as follows:
    Filter:
    0CALDAY(PERIOD FROM/PERIOD TO)
    Rows:
    0MATERIAL(VARIABLE-OPTIONAL)
    0MATERIALGROUP(VARIABLE-OPTIONAL)
    Columns:
    Structure>Number of Records(KF)>Restricted upon Characteristic"Infoprovider(0material)".
    ReceiptTotalValue
    IssueTotalValue.
    But when i include the "TotalStock Qty" in the Query design,the system throws an error..(
    Abort system error:RSDRC/FORM CONVERT_SEL_TO_SELC NO CORRESPONDING SFC ENTRY
    Abort System error in program RSDRC_NCUM_ROUTINES and form READ_REF_POINT-1-).
    The client wants the "Stock value" to be displayed as in MC46 Report(R3) in the BW Report aswell.Would appreciate your timely help on this..
    Manythanks
    Arun

    Any sugestions ??

  • Capturing Stock in transfer qty and open PR qty

    hi
    I am developing a report where I want to capture the following data:
    1) Stock in transfer CC quantity (Inter company transfer)
    2) Open PR quantity
    Can you plz suggest from where(Table name) I can capture this data?
    Answer will be awared with full points........
    Regards
    S

    Open Qty PR, You can check Comparing Tables EBAN & EKBE through Pur Req Number
    Thx
    Raju

  • Change Confirmed Qty in Sales Order User exit/ATP User exit

    HI
    We have a requirement to change the ATP Qty for certain meterials & Order Types  duing sales Order User exit(FORM USEREXIT_MOVE_FIELD_TO_VBEP.? ) or ATP User exit.( ATP...OUT?).
    Is this ok to update the XVBEP in FORM USEREXIT_MOVE_FIELD_TO_VBEP of MV45AFZZ ?
    Our requirement will be like this, for one order type ZSAL( and for certain Materials)  we need to reserve 4 qty, if any order comes with 10 qty and the confimed qty is only 6( total available stock at present) , then we should only confirm  2 qty for the other order type( For Non ZSAL Order Type), and reserve the 4 QTY for ZSAL Order Type.
    If there are multiple schedule lines for an Item, we need to reduce the qty equally( as possible) from all schdule lines.
    i.e. date1 qty 4
         date2 qty 6,
    in  this case we should confirm  Date1 QTY 2, date2 qty 4, so that the remaining 4 will be reserved for ZSAL Order type.
    Whats the Best way to achieve this ?
    Edited by: agrud agrud on Sep 8, 2011 4:01 AM

    Hi Agrud,
    Did you check the possibilities with configuration.If it is not possible with configuration then you can use that exit.Before i used this but only to display not to change any thing.
    Regards,
    Madhu.

  • Confirmed qty change in Sales Order

    Hi all!
    Do you know if exsist a fm or bapi to modify the confirmed quantity in schedule line of a sales order?
    I know that exsist BAPI_SALESORDER_CHANGE but I'm not able to modify confirmed qty.
    My flow consists in two steps:
    1. sales order create with confirmed qty = 0;
    2. sales order change to modify confirmed qty.
    Thanks,
    Gianluca

    Confirmed quantity is a result of configured ATP rules and availability of the inventory. System has control over it and it is not changeable. Imagine a situation where system says that the confirmed quantity is 10 cases based on the inventory availbility and you go out there and change to 100... does it make sense to be able to change it like that?
    So, no you cannot change it. You can only influence it by changing your order quantity or adding inventory or move some reserved quantities to unreserved status etc.

  • Total Qty and Valuation is "0" for Items w/out Movement for the Prev Period

    Hi MM Experts,
    We encounter error message "Valuated stock becomes negative"when we try to post a goods issuance against a production order with posting date Jan 31, 2011 (our current period is Feb 2011). I checked the materials' stocks and there are enough stock for the issuance. I checked the material valuation in the material master and I found out that the Total Stock Qty and Total Stock Valuation for period 01 2011 is both "0". The Total Stock Qty and Valuation for periods Dec 2010 and Feb 2011 however have the same value. I also checked the stock movements from December to Feb and I found out that there were no movements for January (which means the quantity and value should be the same as end of Dec). I tried simulating the posting of goods issuance using Feb as the posting date and the system did not issue any error message.
    Have anyone encountered the same issue? Is this standard to the system? We need to post the issuance using posting date Jan 31 and we would really appreciate any inputs/ help.
    Thanks and regards,
    She

    Hi Raj,
    We have made the balance as Zero Now.
    The point here earlier ie when the Account was not having Open item status, system has calculated Foreign currency valuation based on currency and not on Line Item.
    Where as now it is calculating based on line item(which is Open item).
    The point is expectation is system to calcuatate forex valuation for future items ie items posted after Open item activation , where as currenty When the account is Zero system is calculating Forex difference.
    regards
    N.Kumar

  • View open qty and manually close SO

    Hi,
    Example : I have SO with qty 10pcs, but only 3pcs are delivered, the remaining 7pcs are yet to be delivered. Hence, this SO is still open. The thing now is that I want to see the open qty and manually close the SO.
    I tried with VA05 but it doesn't show the open qty. What transaction to view the open qty? How to manually close an open SO? Is there a button or checkbox that I can just click on it to close the SO?
    Thanks.
    Edited by: Wooi Ling Ng on Feb 14, 2008 2:56 PM

    Hi,
    As said that you want to close the sales order for 7 qty of total 10 qty.
    When do the following.
    Goto the sales order created, goto the line item eg 10 scroll towards right side of the screen to find the field " Reason for Rejection" assign the relavent message why you want to close the order for remaining quantity.
    If you have many line items you can reject the undeliveried line items if you want them not to delivery.
    Kindly Reward points if usefull.
    Regards
    vK

  • Delivered qty and put in stock qty not updated after GR reversal

    Hi,
    We encountered a strange issue while making a 102 movement for a production order.
    Planned order qty  - X
    Production order qty  - X+Y
    Confirmed Qty  - X
    GR posted for Splits of Qty X
    GR Posted for Qty Y
    At this time Quantities in Production shows like
    Planned Order   X
    Order               X+Y
    Delivered          X+Y
    Commited        X
    As wrong posting has been done for Qty Y, GR reversal has been carried for Y. After Reversal
    Deliveried Qty and Put in Stock qty still shows X+Y.
    This is an issue as settlement can not done as it has difference in quantities. This issue was nver observed earlier.
    Looked for any available SAP note for this issue and couldn't get one. Any help to fix this issue or reference to any SAP note is appreciated.
    Regards,
    ppcon

    Hi,
    Look into the Transaction : COGI.
    If the entry is there act upon the entry.
    If this is the case, suggested is to schedule the Program : "CORUPROC" in thr regular intervals.
    Hope this helps..
    Revert for further discussion..
    Regards,
    Siva

  • How to Calculate Net weight, Gross Price, Surhcarges for  Confirmed Qty

    Hello,
    I have a requirement where I need to calculate the Net weight, Amount( gross price), Surhcarges etc.. for the Confirmed qty of
    a sales order item. In SAP standard the pricing procedure will run for the Order Qty and all the prices are related to Order qty, not for Confirmed Qty. Confirmed Qty will be sum of all scheudle lines qty.
    Is there any standard Function Module to get the prices and weights for Confirmed qty? Just  I need to display this data in a Report.
    Pelase advise me.
    Thanks.

    Hello,
    Instead of simulating the order I am using the User Exit so that that actaul values will appear in item conditions tab. I am using the Exit USEREXIT_PRICING_PREPARE_TKOMP  where I am doing the sum of the scheduled lines confirmed qty and passing the same to TKOMP-MGAME field and the pricing is calculation is done for the confirmed qty. But I am facing some problems when the order has credit block. When the order credit is released via VKM3, the pricing doesn't updated. When doing the credit release, the order cofirms the full order qty and the pricing(Gross price) is not getting updated.
    How can we run the pricing update in Order change mode with pricing procedure as 'C'.
    Did anyone has worked on this type of req? let me know your thoughts.
    Thanks.
    prabha

  • Confirmed qty always shows 0

    Hi :
    I encountered very strange case,in item level of sales order, then I went to schedule line tab and saw confirmed qty showed grey and zero, but in md04 and mmbe the available qty is 10,then I went back to header level to click on ATP check, it only shows one button "continue", and at bottom, I saw "Dely proposal:not possible" which means I am unable to confirm ,please help.

    Hi,
    Go to
    IMG >> SD >> Basic function >> Availability check and TOR >> Availability check >> Availability check with ATP logic >> Define default settings >> Maintain E in front of your sales area
    Then in sales order u will able to see all tabs
    One time delivery
    complete delivery
    delivery proposal
    ATP qty.
    scope of check
    other plant
    Kapil

Maybe you are looking for