Ordering party has to be a company

Hi All,
I have the following error when i post PO from R/3 to SUS.
An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
But intrestingly when i reprocess it SXMB_MONI in SUS system with out changing anything it gets posted...and PO gets created in SUS.
Can any one tell us what could be the reason.
Thanks
Jagan

Hi
Have you defined a purchasing company in SUS ?
Transaction BBP_SUS_BP_ADM:
1. Expand the Business partner folder.
2. Choose Business partner as company code.
3. In the selection screen, enter the following data:
The company code (corresponding company code in MM system)
Address and tax information
Other information if required
4. Choose Execute.
Related SAP OSS notes ->
Note 954410 - Error creating SUS Admin user in SUS-EBP one client system
Note 890260 - Contact person not replicated from SUS to EBP
Note 735590 - ERS from EBP is processed incorrectly in SUS
Note 947161 - SRM-SUS user management: Password needs to be entered
Related links ->
SUS Purchase order
Help MM-SUS!
Transfer PO from EBP to SUS (one client)
Hope this will help. Do let me know.
Regards
- Atul

Similar Messages

Error when Creating Contracts: Ordering Party is not a Company

Hi,
When creating a local contract in SRM, we are getting this error: Ordering Party is not a Company.
Has anyone encountered this?

Hi,
I could not find this error but did find the following one:
BBP_ATTR 026 The organizational unit &1 is not a company
Is this the same error ? It sounds like the Organization Structure is not correct here. A check happens in FUNCTION 'BBP_OM_TEST_COMPANY'. This is an Org structure issue, check the user, purchasing group, purchasing org etc in this case.
I hope this helps,
Kind Regards
Lisa

Supplier Replication of Ordering Party from R/3 to SRM

Hi,
I'm replicating supplier data from ECC (6.0) to SRM (5.0) via the standard supplier replication program (ie: BBPGETVD txn). I would like to replicate a supplier that is considered an Ordering Party but not an Invoicing Party. In ECC, this supplier is extended to Purchasing Org, but not to Company Code. When I replicate this supplier to SRM, the following Business Partner Types are flagged: Vendor, Bidder, and Invoicing Party. This means I can create PO and post Invoice against this supplier. I suspect this is standard setting by the replication program. Can anyone confirm?
I want to allow users to create PO against this supplier, but do not want to allow users to post Invoice against this supplier. Is there any way to achieve this via standard functionality?
Only method I can think of is deflagging 'Invoicing Party' via replication program enhancement, but I want to avoid any enhancement if possible.
Any suggestions would be greatly appreciated.
Thanks,
Susan Wang

Hi
Please go through these links ->
http://help.sap.com/saphelp_srm50/helpdata/en/2a/38fd37dcc4e34ce10000009b38f842/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2c/867d3ca2156c6ae10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/e4/47f839f42a7b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/b6/9d353e7a069028e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/48/cde93a2876a81ae10000000a11402f/frameset.htm
Regards
- Atul

Header text is not changing when ship to party has changed

Hello Team,
I am facing one issue when ship to party has changed in sales order the header text is not re determining automatically,
I have read some posts and found that using standard its not possible we need to write enhancement for that.
I have written below code to change the header text but facing some issues, can you please help me on to resolve this issues.
I am calling 'RV_TEXT_COPY' FM inside the include FV45PFAP_VBAP_FUELLEN_TEXTE ,
then its saving header text correctly, but this include is calling whenever I click on Header Text tab,
if suppose if I am changing ship to party and I am not clicking on Header Text tab then this FM will not call this is an issue
and one more issue is even in screen data is changing after calling RV_TEXT_COPY FM
but STXH table is not updating, its updating the first value when we created the order.
Can any one tell me how to solve this issue, Thanks in advance!

Hi Mac,
I think the following user exits can help you. In the Include MV45AFZZ use the below exit points,
1) USEREXIT_MOVE_FIELD_TO_VBKD
2) USEREXIT_SAVE_DOCUMENT_PREPARE
try to write your code logic here.
Regards,
Satish

Error: Purchase order 4500000830 has no items in mb1b 541

Hi All,
I have created a Sub contracting Purchase Order with ITem Category L and Account Assignment E.
Now iam getting problem while issuing Stock to Subcontractor thru MB1B 541 Mov type. It is throwing error like Purchase order 4500000830 has no items.
Scenario is My client creates pos based on Sales order only. Now he want to Issue stock to Subcontractors based on sales order.
for this, I created Semifinished material, two raw components, Sales order for Semifinished material and maintained bom for semifinished.
Please go thru this and suggest.
Reg,
Ashok

Hi,
Did u checked the link provided by me. As per SAP, it is not possible to post 541 stock of material provided to vendor in subcontracting with account assignment sales orde or project stock.
If you want to differentiate, use a separate storage location and transfer the stocks there. When you do the GR, the components issue happens directly from your storage location from sales order stock.
Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
If you want to provide material from your stock,
For components that are managed in sales order stock or project stock, you can define whether the components are to be withdrawn directly from each sales order/project stock or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
in the MRP view of the material master record (MRP 4)
in the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock or project stock.
Regards,
Ramakrishna

Stock transfer order between 2 plants in same company code

Dear All,
We have the requirement, where in the stock tranfer order (between 2 plants in same company code) instead of Material valuation price, MAP/Standard (depends on Price Control) gets picked up from supplying plant ,user should be able to enter its own price while creating stock transfer order.
For fullfilling this requirement, I have created new condition type(where i have changed condition category from internal price "G" to "H" - Basic Price)
Instead of using condition type- P101 in the stock transfer pricing,I have used above created new condition type, in pricing procedure then also while doing the post good issue against the outbound delivery( move type-"641", moving average is getting picked up.
Can you please tell,where is the setting where we can make the system to consider manual given price while creating the stock transfer order instead of picking moving average price.
Its very Important requirement ,please Provide valuable Inputs else provide some alternative.
Thanks & Regards
Nitin Chhabra

Stock Transfer Order between Plants in the same Company Cpde are not relevant for pricing, as there is no billing. Billing only takes place between company codes. As same company code it would be like selling something to yourself - it doesn't make sense. The stock value in the receiving Plant depends on the price contol there. If standard price, then you must enter the price when creating the material or use material revaluation to change it. When you transfer the material from the issuing plant, the value there will be transferred. In case of standard price any difference is posted to stock transfer differences. If using MAP then the value will be transferred from the issuing Plant in full.
If you use costing with standard price in main plant, then it is possible that you can transfer the cost from the main plant to the second plant, by using special procurement key for costing.
Rgds
Richard

HT3702 I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DH How do I delete the restriction in iTunes

I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DHHow do I delete the restriction in iTunes

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

Purchase order 6200018790 has no items

Dear SAP Professionals,
I encounter the following problem when I do the Goods receipt from TAC MIGO. The purchase order is fine and have no issues. Kindly let me know what to check in the PO when we receive this error.
Purchase order 6200018790 has no items
Message no. M7033
Diagnosis
The system has not found any order items in the purchase order 6200018790.
Procedure
Make sure your entries are correct.
If the purchase order number has been incorrectly specified in your reference document, you can search for the correct number with the search functions.
Thanks and Regards,
SZ

this can cause of any of the following reasons:
pls check,
whether the po is released?
whether there is any confirmation control in the po?
check the delivery date.
whether the items in the po is still open?
regards,
indranil

Process order %00000000001 has been selected for deletion

Hi Guys,
With the use of strategy type 86 (assem bly processing for process order) when creating the sales order it is giving the error
Process order %00000000001 has been selected for deletion
Message no. V1796
According to process order will be created automatically with the order type PI04. Related setting for the order type Pi04 in the specified plant is done.
Pls help.

Solved..Change the customer number

How to check the sales order that has been PGI from a range of dates.

Hi SAP Gurus,
I have a query on how can I check the sales order that has been PGI from a range of dates in SAP?
Thanks,
Madelyn

Dear Madelyn
Go to VA05, give the date range and execute. List of sale orders will be generated. There you can see a tab "Status" in which, the status would be like
- Not delivered
- Partially delivered
So based on this, you can decide whether the order is still open or completed.
thanks
G. Lakshmipathi

While creating Process Order system has to validate the Batch field

Hi All,
While creating the Process Order system has to validate the Batch field which comes under Goods Receipt tab. Please let me know is there any standard user-exit is there for this requirement.
Regards
Naveen

Dear Swapnil,
Thanks for the reply,
At the time of creation of process order I am entering the External Batch no as per the logic i.e. first two letters as 08 (for year), next two letter as section 51 (for solid mfg section, which i am planning to maintained in the Z table) and last three letters as 001 (for serial no in this section). so batch no is 0851001.
Now i want to validate these all letters as per the above logic i.e first two letter should be cross check with current year, and next two letter with Z table for section and last three letters for sr no with previous batch, which is already created for this section.
Now can you please help me to find out the function exit or screen exit to validate the above requirement at the time of creation of process order i.e. COR1, under the Goods receipt tab.
Thanks in advanced
Naveen

Purchase order 4500003445 has no item error is comin

hi all,
created one PO, then created Invoice with refrence to PO, After doing MIRO, I am trying to do GR with refrence to PObut system is showing error purchase order 4500007834 has no item.
Gr based invoice is uncheck.
vendor aknowledgement is unchecked.
please guide
regards
vb

Hi,
1. check GR non valuated is checked or not .
2. in confirmation tab, check if there is inbound deliv ery or rough GR seleted or not

Change Request SDCR - Sold to Party has to appear by default from IbaseComp

Hi,
TCode: CHARM_CREATE
In this screen I dont want to enter the Sold to party.
'Sold to party' has to come by default based on the IBase Component entered In Change Request SDCR Transaction. Is there any setting for the same.
In case of support desk when we create a message, sold to party comes automatically, Bcz in IBase Partner Sold to party is maintained. Like this can we make it for Change Request(SDCR) transaction.
Regards
Praveen Khot
+91 9724035023

Hello Praveen,
To make the "Sold To Party" be determined from the IBase in the SDCR, you have to adjust the partner determination procedure SDCR0001 using the same access sequence for "Sold To Party" than in the partner determination procedure for the SLFN (i.e. 0018 SAP Service: Determination via IBase/Ind Object from Ref. Object Set).
Then in CHARM_CREATE, leave the "Sold To Party" field blank. It will be populated during the creation. Go to CRMD_ORDER to check the assignment.
Hope this helps.
BR
Stéphane.

Order type has not been defined in sales area '1000','10','00'

Hi Gurus
I am getting this error when try to create order
Order type has not been defined in sales area <'1000','10','00'>
but I checked in the configuration and assigned
SPRO:SALES:SALES : DOCUMENTS :SALE3S DOCUMENTS HEADER:
ASSIGN SALES DOCUMENT TYPES : Assign sales order types permitted for sales are :1000 -10-00
But still I am getting this problem when trying to creates sales order from va01.
Thanks
Kris

SPRO --> Sales & Sistribution --> Sales --> Sales Document Header --> Assign Sales Area to Sales Document Type
The above is one option.
Also Check Sales Document Type in T.Vode: VOV8
SPRO --> Sales & Sistribution --> Sales --> Sales Document Type
whether The Sales Document Type is Block, which could also be a possible reason.
Also check the Sales Area setting.
Regards,
Rajesh Banka
Reward points if useful.

Production order cost has exceeded the released budget of its WBS

Dear All,
I have got a case where the prod. order cost has exceeded the released budget of its concerned WBS.
I found that the budget check is active and working fine for Prod. order and other activities.
I am not getting , how this default has occured.
Please help me resolving this case.
Regards,
Vishal

If the budget check is active against Released budget and Production order assigned to WBS has crossed released budget. It should not happen.
Please run CJEN and check the report.
Regards
Nitin

Ordering party has to be a company

Similar Messages

Maybe you are looking for