Organization Data for Create Change (Roles )

Hi,
I am required to fill in front end T Codes for a few COPA reports such as :
Customer Profitability Analysis
Organization Profitability Analysis
Product Profitability Analysis
Sales Analysis
Ship To Analysis
There is only one role defined here and that is Sales Management
what BI T- CODES would correspond to each of these reports?
Thanks
Edited by: SAPPER BI on Mar 11, 2008 11:29 PM

You can create workbooks assign to corresponding roles and let users it access thru BEx Browser (preferred approach)
OR
You can also have users access queries directly thru BEx
OR
If you add queries to the uses's favorites than once they log on to BW all the reports will appear under thr favorites. Reports can be executed directly from here by double clicking it (it will launch BEx)

Similar Messages

  • Organization Data for Service Orders and Service Confirmation

    Hi,
    Whenever I create any Service Order or Service Confirmation, the Organization Data is automatically populated.
    My doubts are :
    1. Is is mandatory to provide Organization Data for Service Order/Confirmation Creation ?
    2. What/ Where are the customization for the Organization Management for the above scenario ?
    Thanks and Regards,
    Samantak.

    Dear Samantak,
    org determination should only be made, if you have customized it.
    So please check which org. data profil has been assigned to the involved transaction types (in SPRO Define transaction types).
    And what the profil does (the rule behind) can be found also in SPRO
    - Master Data
      - Organizational Management
        - Organizational Data Determination
          - Change Rules and Profiles
             -Maintain Organizational Data Profile
    Please check the documentation there!
    Regards, Gerhard

  • Authorization control for creating change request transaction

    Hi,
    We are creating the Change Request(SDCR) through support desk message by using action Create Change Document.
    How can I control the creation of Change Request Document(SDCR).
    By which  roles i need to control this.
    Regards
    PK
    Edited by: PK on May 14, 2010 2:19 PM

    Hi,
    I have removed the role SAP_SUPPDESK_PROCESS & tried to create Change Document . It allowed me to create.
    Can you check & tell exactly which role is for creating Change Document.
    Regards
    PK

  • M7279- Data for creating a delivery is incomplete (Vendor)

    Dear All,
    i am getting below error while processing Goods receipt.
    "M7279- Data for creating a delivery is incomplete (Vendor)" 
    1.I am doing Goods receipt with mvt type 521( GR without ref to prod order).
    2.storge location is WH manged + HU managed.
    3.Material master is assinged with sales org / distribution channel- sales view.
    4.maintained for Transportation Group . loading group - sales gen/plant data.
    5. Maintaine for shipping data for Storage location ( customisation -SPRO-LE-Shipping-Basic shipping function- Shipping points and goods receiving points determination-Assign goods receiving points for Inbound Deliveries.)
    6. HUM- setting - LG-HUM-HU requirement for storage location and default values for deliveries)
    Why system is thowing this error message as in my case vendor does not comes in to picture ( I can cosider if a GR is with refence to PO , in that case in customer master number has to be maintained in vendor master + shipping condition entered in customer master)
    Could you pl help me on above ( as this is 521 movement , it should not have any link with vendor or customer master) then why i am getting this error.
    Appreciate your earliest response.
    Om

    I am doing simple goods receipt without reference to any document ( mvt 521 - goods receipt without ref to production order) , in that case it should not ask for any vendor or should not search for vendor code , i am not getting why it is searching for vendor.
    If i removed the setting related to HU management for storage location then it allows me to post the document without any error, but if i activate for HU managment in below path i am getting error ( even in below path if i entered any vendor code then it allows me to post the document)
    Logistics general- Handling unit management- basics-materials management - inventory management -HU requirement for storage location and default values for deliveries
    plant     Storage location      Partner storage location   Sal org  Dist chan shipping division vendor customer HU requred
    05         ZBD1                       ZPK1
    in above if i entered any vendor code then it allows me to post the doc but i remove it then i am getting above error.
    If there any alternative or other setting to overcome this error.
    Thanks
    Om

  • Mismatched data for "Created By" in generated Purchase Requisitions

    Hi,
    Just wanted to ask question to all gurus that, I see some mismatched data for ‘created by’ for system generated Purchase requisitions. As if I do MRP run using MD40(MPS scheduling run) then system is showing PR created by 'MRP controller' but if I run MRP using MD41(single item multi level), then system is showing the user ids name(the person on whose id MRP run is executed) is showing in the PR.
    As both the MRP runs being executed in the same user id, then there should not be such kind of diffrent data. Due to this mismathced data we are gettting some difficulties in the reporting. 
    Thanks in advance.
    Regards
    Amit

    Hi!
    It's solved. The mistake was on the connection of the tables:
    BUT000 - BUT020 - ADRC
    Thanks and regards,
    Mon

  • BAPI for create/change Routing

    Hi ,
         Are there any BAPI's for creating/ changing routings.
    Regards,
    Divyanshu

    hi,
    <b>BAPI_ROUTING_CREATE</b>"used for creation.
    Regards
    vijay

  • Re : Organizational data for inter-company billing

    Hi
         While doing intercompany settings (img - enterprice structure - SD - assign sales org - disribution plant)     i am getting the following error
    " Organizational data for inter-company billing
    missing in plant SUDA "
    How to solve.
    Thanks
    Anto

    Hi Anto,
      IMG check wheather you assing Supplying company sales area to Supplying plant.
    IMG->Saes&Dsitr -> Billing -> InterCompany Billing-> Assign Organizational unit by Plant
    Select Plant (supplying company) and assign Sales org, Distbn Channel and Division of supplying company.
    Regards,
    M.Manickam

  • Organizational data for inter-company billing missing in plant 2200

    Organizational data for inter-company billing missing in plant 2200

    Dear Siva,
           This may be related to incompleteness in the inter -company billing configuration settings so go through this IMG path then do the proper settings,
    SPRO>Sales and distribution>Billing>Inter company billing>Assign organisational units by plant, here you need to assign the Sales organisation,Distributional channel and Division (sales area) to the 2200 plant.
    Now you try
    I hope it will help you
    Regards,
    Murali.

  • How to change some partner data for defined partner role?

    Hello SDN!
    I need to set another ID and address for partner both in header and positions. Data comes from CRM ISA. I'm using extended BADIs with methods IF_EX_CRM_ISA_BASKET_HEADCHANGEHEAD_BEFORE_ORDER and IF_EX_CRM_ISA_BASKET_ITEMSCHANGEITEMS_BEFORE_ORDER for header and positions. These methods have tables CT_PARTNER and CT_INPUT_FIELDS. CT_PARTNER already has record needed for me (with role '000000002' and given REF_GUID). I need to change PARTNER_NO field with our ID for this record. But if I do this, focuses in ShipTos comboboxes in order.jsp become reseted after any refresh/actualisation of page. Record in CT_INPUT_FIELDS also created and filled properly.
    How I can properly change PARTNER_NO field?
    Regards, Lev

    Hi Lev,
    Local variables maybe?
    Have a look at the CRM_PARTNER_OB function group for reading. storing and deleting the partner data.
    Regards,
    Patrick.

  • No organization data for service products

    Hi,
    I create a CRM service order with a service product. Now there is a message, that the product in sales organization and distribution channel is not scheduled.
    Our service products in general don't have organization data, cause they occur from r/3 service master data (transaction ac03).
    How to assign org.data to service products in CRM? I cannot assign the set type for org.data to the category of service products cause we download the products with the middleware from R/3.
    Regards
    Jochen

    Hi
    Sercie products will be created in CRM in service product type, while creating a service product you have to assign the Organizational data in sales and distribution tab
    Thanks
    Satheesh

  • How to fetch data for the Change Request in PROCESS_EVENT

    Hi All,
    I need to write some custom logic on Save/Submit button. For this I am planning to enhance the PROCESS_EVENT method of class CL_USMD_CR_MASTER. Within this method I need to access runtime data of the change request currently being processed.
    I am going to create a post-method exit for this PROCESS_EVENT method. Is this correct?
    I have heard we have APIs in MDG which can be used to fetch data, however I do not know how to use the same.
    Can someone please help me with sample code how to fetch the runtime data of the Change Request
    Thanks in advance.
    Regards,
    Vanessa

    What MDG domain are you working on? What you are trying to do is called "reuse mode" enhancement and you do NOT want to tinker with the FPM feeder classes in this case. SCN document Configuration and Enhancement of SAP Master Data Governance contains many examples on how to achieve this.
    This is a how-to document for MDG-M reuse mode enhancement: Extend MDG-M Data Model by a New Entity Type (Reuse Option)
    This is a how-to document for MDG-C/S reuse mode enhancement: SAP How-To Guide: Extend the MDG Business Partner - Node Extension (Reuse Option)
    Keep in mind, these examples are mainly for additional "master data" fields. If you need additional fields that are not master data but are more related to the Change Request itself, you should use this how-to document: Enhancement of the User Interface Building Block for Change Requests
    Again, all of these documents can be found on the first document I referenced above. I suggest that you bookmark it.

  • Change the Layout for Create Change Display and   Alv List

    Hi All,
    I am working on Custom Development  WD Application for Maintain   Employee.
    I need to Get help/advice to hadle the two Problems.
    1) In my application I have to provide Create,Change & display Employee.
    Customer needs seperate Link/Application for all Create , Change and Display in Portal.
    I thought I am planning to Create Three Application in the WD Component(Create,Change & Display) while Pressing the Application I have to find out what is the Application They Pressed in the Componenet Controller to Change the Layout/Field (Edit/Display/Visisble) according to Create/Change/Display Employee.
    For this How to Find the Application name of the WD Componenet.
    2) To show the Employee List I am having using ALV LIst.
    But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
    I thought I am planning to provide Visible/Invisble columns after providing one button.
    If they pressed this button It will next set of Columns with out scrollibng.
    How to handle this ?
    Kindly help/advise  me for both the Problems to proceed further.
    Thanks in advance.
    Dav

    1.For this How to Find the Application name of the WD Componenet.
    DATA:
      l_api                           type ref to if_wd_component,
      l_application_api               type ref to if_wd_application,
      l_application_info              type ref to if_wd_rr_application,
    lv_name                            type string.
      l_api              = wd_this->wd_get_api( ).
      l_application_api  = l_api->get_application( ).
      l_application_info = l_application_api->get_application_info( ).
      lv_name = l_application_info->get_name( ).
    > 2) To show the Employee List I am having using ALV LIst.
    >
    >  But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
    Are they planning to buy Wide Screen monitor ??
    I am not really fan of the solution you propose, at the same time i am not having better idea. I would get the customer on table and see how they would like to have the presentation of 35 columns without scrolling.
    ALV provides customization, in that way users can select their own list of columns.

  • BAPI  for create/change purchase info record

    Hi All,
    Could any one suggest me the BAPI for the create/change purchase info record(ME11/ME12).
    Earliest can be appriciable.
    Regards
    Anil

    Hi,
         I did not get any bapi related to create/change purchase info. But i can give u list of purchase info . if u got revert back to me
    Reward if it is usefull..
    Bye.
    BAPI_INFORECORD_GETLIST

  • Workflow and Bo for create\change GL master .

    Hi All ,
    Is there a standard workflow and BO for creating and changing the GL Master .
    Thanks ,
    Naval Bhatt

    Check BUS3006

  • Badi for create/change outbound delivery

    Hi,
    I want to write a custom code on the create/change of outbound delivery.
    found a badi def: DELIVERY_PUBLISH and method: delivery_publish_after_save.
    I want to know if this is correct place to write my include or any other place?
    Thanks & regards,
    Ravish

    Hi,
    Check SAP Note 415716 - User exits in delivery processing also.
    Regards,
    Eduardo

Maybe you are looking for

  • Files do not show up on HDD

    I tried to get an answer through the iTunes community, and was advised to try here instead as it didn't have anything directly to do with iTunes Not all iTunes Files not showing up on External HDD So in a nutshell, all of my 35'000 iTunes files (actu

  • Select_List_From_Query Default Value

    Hello, Is there a way to specify the default item shown in a Select_List_From_Query drop-down list? I would like to display the value currently in the column when the report is shown. Thanks, Scott

  • Unity 8 upgrade and delay when accessing voicemail via TUI

    We just recently upgraded our Unity UM 7.x with FO to 8.03. when hitting messages and after entering your password you just get dead air. when going back in and doing it again it works again. this is happening to everyone. i read in the release notes

  • I do not have my serial number

    I signed up for the Photoshop Photography Program in March, but had not yet received a serial number to activate my products. I signed into my Adobe membership, and see my transaction history and 3 order tickets, but I have no "products" or "serial n

  • CF11: problem with BFILE documents retrival

    Hi all, We have encountered this problem after upgrading to CF11.  We used to use cfquery to select a bfile column directly like below: <cfquery name="getDoc"> select bfile_column from a_table where id = #id# </cfquery> we then use cfcontent to open