Organizational reassignment not possible

Hi,
When i am trying to change the employee group from active(1) to terminated(5) in the transaction code PAL3 i am getting the error "Organizational reassignment not possible".So please guide me to solve this problem.I am with ECC 6.0
Regards
Ravi

hi,
       for the organization reeassingment you need to perfrom the action for the employee by useing T.code pa40.
and you have to create the action
1. copy the all infotypes (infotypes which you maintain previously for that employee )
2. user group ,
run the action,
RupaPrasad.

Similar Messages

  • Organizational reassignment not permitted

    Hi,
    I have tried to change poistion,personnel area,employee group and employee subgroup, system throwing an an error "Organizational reassignment not permitted"
    Can any one provide your valuable suggestions why i am not able to change them.
    Thank you in Advance,
    Hasini

    Hi,
    Please check note 116007 "PG162: Organizational reassignment not possible".
    To eliminate this error message, I would ask you to run the report RPUPAV00 for all employees. Please read also the documentation of report RPUPAV00 at first.This report was created to handle the reported
    problem.
    Please also read carefully the documentation of feature IVWID. Probably you are using different view indicators, e.g. for varying personnel areas.
    Program RPUPAV00 is setting the view indicator (VIEKN) on the basis of the  IVWID configuration.
    The conversion should work correctly and afterwards no PG162 message should occur any more. You can check afterwards via transaction SE16, table PA0003 if the view indicators have been changed.
    With regard to running RPUPAV00, if you do not have feature IVWID defined properly, the program likewise will not update VIEKN.
    I hope this helps,
    Daniela.

  • Elements Organizer does not install when reinstalling PSE10

    I have a problem that I cannot seem to resolve. Previously Adobe Photoshop Elements 10 had been running flawlessly on my computer and was easily opened by clicking the desktop icon which had a "C:\Program Files (x86)\Adobe\Elements 10 Organizer\Photoshop Elements 10.0.exe" target. After uninstalling and reinstalling Photoshop Elements 10, when I click on the Desktop icon to start the application, I get a dialog box that says "The item 'Photoshop Elements 10.0.exe' that this shortcut refers to has been changed or moved so this shortcut will no longer work properly". If I right click the Photoshop Elements 10 desktop icon and check properties, the Target says "C:\Program Files (x86)\Adobe\Elements 10 Organizer\Photoshop Elements 10.0.exe". When I open Explorer and navigate to where the target says the application file should be, the "Elements 10 Organizer" directory does not exist. The only directory that does exist is the "Photoshop Elements 10" directory and it contains the 'PhotoshopElementsEditor.exe'. Yes if I click on that file the Editor opens, however when I try to load the Organizer workspace once the editor is open, it does not load because the entire folder and application is missing. I even tried searching the entire C-Drive to find the Photoshop Elements 10.0.exe file but it was nowhere to be found.
    To be specific, I had PSE8, PSE9, and PSE10 installed on my 64-bit Windows 7 Professional w/SP1 computer. I decided to uninstall PSE8 & 9 because I had just purchased PSE12 and wanted to make room for the PSE12 installation. When I tried to first uninstall PSE8, the uninstaller stopped with the warning that PSE8 was installed in the same directory as PSE10. The uninstall then terminated when I clicked on OK. Next tried to uninstall PSE9 and received the same warning and uninstaller termination. The same thing happened when I tried to uninstall PSE10. Faced with the situation that all three products were installed in the same directory and would not uninstall individually, I found it necessary to uninstall all three applications manually according to the directions on the Adobe's knowledgebase.
    To uninstall PSE8, PSE9, & PSE10, first thing I did was create a system restore point which is something I always do just in case something goes wrong. Then starting with PSE8, I first printed out the Photoshop Elements Help "Manually remove Photoshop Elements 8 | Windows that I found at http://kb2.adobe.com/cps/826/cpsid_82673.html. Subsequently I printed out the directions for each product, PSE8, PSE9, and PSE10, are all on the Adobe website. Next I followed the directions contained in each article except for running the product uninstaller as I mentioned above and removed all three applications then rebooted my machine.
    Next I reinstalled PSE10 and tried to open it only to find that it did not fully install especially the Elements Organizer. As mentioned you can open the Editor by going directly to the executable file however you cannot access the Organizer because it did not install and cannot be found anywhere on the computer. I have uninstalled and reinstalled PSE10 five time now each time using the product Uninstaller plus the "Manually remove PSE10" directions and I still cannot get the Elements Organizer to install.
    My question is does Adobe have a utility that can be run after manually installing a specific product that would find registry entries that were not removed after completing the manual removal process? The problem I see is the manual removal process which shows possible registry entries to remove manually is built on the assumption that you were able to run the Uninstaller which is not the case with my problem.
    Secondly does anyone have any suggestions on how to install both the PSE10 Organizer and Editor?

    I believe I found a solution but I need help in changing some of the parameters to reflect for a United States program install.
    If you go to "Elements 10 Organizer is not installed [SOLUTION]" at http://forums.adobe.com/message/4745941 you will note the Poster says it is possible to force the install of Elements Organizer 10 by using the command line:
    msiexec /i "E:\Adobe Photoshop Elements 10\ElementsOrganizer\Elements 10 Organizer.msi" TRANSFORMS=1031.mst ELEMENTS_DE_DE=1 ORGANIZER_DE_DE=1 STARTWATCHSERVICE=1 SUPPRESSREBOOT=0 NOT_STANDALONE=1 /l*v "C:\Users\<username>\AppData\Local\Temp\OrganizerInstall.log".
    I found that the above command line input does in fact start the setup for the PSE10 "Elements Organizer" Installer except it is in a language other than English.
    Is there anyone familiar enough with coding and command line prompts to change whatever paramenters are necessary to have the installer run in English.
    Hopefully there are some Adobe Staff monitoring this message that can answer the question for me.
    Message was edited by: DAllenJ2215

  • Adobe Photoshop Elements 12 Organizer does not load- why?

    I just installed Elements 12 on a machine running Windows 8.1.  Organizer will not load no matter what I do.  How do I make this program work?

    Hi,
    Unless you overrode the defaults when installing PSE 10 and PSE 12, that shouldn't be the problem. I have installed PSE 11 and then PSE 12 on my Windows 8 system. My Windows 7 is running versions 8, 9, 10, 11 & 12 all quite happily.
    Since you say the problem started in PSE 10, I am suspecting a problem with your catalog - more later.
    When you load the editor, go to the Help menu - have you completed the Adobe Id Profile? Is there a Sign in or a Sign out option? - The Sign out would indicate that you are already signed in. Is this the sign in that freezes on your system?
    Now, back to a possible catalog problem. Try holding down the shift key when you select organizer from the welcome screen and keep it held down until the organizer loads. It should take you to the Catalog Manager - now release the shift key. Click on the New button to create a new, empty catalog and give it a name like Test Temp. If the organizer still fails to load the problem is probably to do with the installation. If the new catalog allows the organizer to load then we will have to try and repair your catalog.
    Brian

  • What can I do when  in Photoshop Elements (version 11) the organizer does not start up??

    !@@

    Yes, thanks a lot. I understand now.
    I now am able to open the old catalog again!! I tried now several times with the new shortcut.
    Thank you very much indeed for ALL YOUR EFFORT and patients with me.
    You suggest now I should click on the repair button. When I do so, the catalog will be overwritten, or I can choose not to overwrite and than the catalog will be twice as big. So I decided not to click on the repair button. When I see afterwards that some functions do not work anymore, I allways can use the repair button. As far as I can see now nothing is lost.. )
    As far as I understood it is only possible to repair with a backup. Happily I made that allways, but I am afraid to use it, for the reason above.
    When I have more time to spare, I will look for all the foto's from the apps of my cellphone and delete them.
    Now I can finish my fotowork, what I had started before, and make Photoshop Elements again the main fotoprogram on my desktop.
    Thank you again! Trees
    Van: Little_Pale_Face 
    Verzonden: woensdag 1 april 2015 21:53
    Aan: Trees kaizer
    Onderwerp:  What can I do when  in Photoshop Elements (version 11) the organizer does not start up??
    What can I do when  in Photoshop Elements (version 11) the organizer does not start up??
    created by Little_Pale_Face <https://forums.adobe.com/people/Little_Pale_Face>  in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/7396555#7396555>

  • When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english

    When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english. It is impossible to do anything.

    barbara.glet
    Thanks for the reply. I need to zero in on your situation a bit more with your help...
    When you go to import your .mts file into Premiere Elements 9.0/9.0.1 and you cannot, do you see this type of message only where your specific file
    would be named as not support
    From Premiere Elements 9.0/9.0.1 using Get Media/Files and Folders
    or
    Are up looking for your file in the space to the right and wanting to drag it to the Timeline, but you see the thumbnail
    with the two arrows on page as seen in panasonic_lumix_dmc_  thumbnail in screenshot below.
    But, that has two arrows, one red and the other green. And, you wrote that your two arrows were red.
    Or something else other than what is shown above.
    If it is as represented in the second screenshot, it is likely that you moved, deleted, or rename that file once it was imported
    at another time into the Elements Organizer. In that case, we need to reconnect the file to the project. More on that later
    once you supply the above details.
    Thanks.
    ATR

  • CProjects approval error - Signature not possible : no user certificate ex

    When i try to approve the phase in cProjects i get an error which says
    "Signature not possible : no user certificate exist".
    Where exactly do we maintain this certificate because i am not able to change the decision for phase approval.
    I have maintain the person responsible for project role via Organizational mgmt. in PPOCE and BP transactions. I have also specified personnel number and user in the identification tab in BP tcode.
    Please reply asap,
    Pratik.

    The issue is solved.
    1. Specify Personeel number - BP transaction
    2. Specify user name - BP transaction
    Additions made :-
    Specified external reference number - BP transaction
    Also made changes in Phase type settings related to approval where couple of statuses were changed.
    Regards;
    Pratik

  • The expenditure organization is not active

    Hi All-
    I've got a strange issue importing timecards from our external system. Approximately fifty records have failed transaction import with an error message of 'The expenditure organization is not active.' The error message makes no sense because I've verified the following:
    The expenditure org is active (no date restrictions)
    The expenditure org is classified as both Project Expenditure/Event and Project Task Owning
    The expenditure org exists in the hierarchy
    I couldn't find any direct hits on Metalink, so I'm wondering if anybody might suggest other possible issues that I'm not seeing? Any other setups I should check?
    Thanks in advance,
    Joe

    All --
    It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
    I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
    Joe

  • Assignment of single Sales group to multiple Sales offices not possible

    Hi all,
    We need to assign single sales group to multiple sales offices in CRM. When we try to assign a Sales group to more than one Sales office the first assignment between Sales group and Sales office is removed. Only the new assignment is available.
    Instead of having two assignments I still only get one.
    First I transfered the ECC organization as Standard backend integration. When I realize I needed multiple backend assignment I ran the Conversion to multiple assignments. However, I am not able to realize multiple assignments.
    Is it not possible to realize multiple assignment if you first transfered the ECC organization as standard (single) assignment?
    Please let me know how to overcome this problem.
    Regards
    Anders

    Hello Anders,
    Starting CRM 4.0 multiple hierarchy with this enhanced org data model
    works the following way:
    - 1 R/3 org data mapped to ONLY 1 CRM org unit.
    - multiple hierarchy (1 sales office assigned to several sales org,
    1 sales group assigned to several sales office) is managed in the detail
    of the org unit with tab Function and with sub tab sales office
    and sales group.
    For example if you have following R/3 org structure:
    Sales org SOr1
    _ Sales office Sof1
          _ Sales Group Sg1
    _ Sales office Sof2
          _ Sales Group Sg1
    Sales org SOr2
    _ Sales office Sof1
    In PPOMA_CRM you have to do the following:
    For the R3 mapping :
    Sor1 mapped to org unit 50000001
    Sor2 mapped to org unit 50000002
    Sof1 mapped to org unit 50000003
    Sof2 mapped to org unit 50000004
    Sg1 mapped tp org unit 50000005
    And for the multiple assignment
    - For sales org 50000001 and 50000002 you just have to maintain in tab
    function, sub tab Sales org the Distribution channel division values
    - For sales office 50000003 in sub tab Sales office the assignment to
    sales org Sor1 and Sor2
    - For sales office 50000004 in sub tab Sales office the assignment to
    sales org Sor1
    - For sales group 50000005 in sub tab sales group the assignment to
    sales office Sof1 and Sof2.
    If you have different division distribution channel on sales office sale
    group compared to the sales org you can maintain manually the values.
    Or if is it always the same values you can use * value for distribution
    channel division (in that case please read carefully notes
    691015 and 735020 if needed)
    In addition regarding report CRMC_R3_ORG_GENERATE I would like to
    clarify that this report can only be used for initial download, as
    written in the customzing documentation of this report (spro-CRM -
    master data -  org management - data transfer - Copy SAP R/3 sales
    structure ) it can only be executed once and so following org
    modifications have to be done manually in PPOMA_CRM.
    So for this report the correct way to use it is to create all the R/3
    org data in 1 shot.
    If only 1 R/3 org data is already mapped to a CRM org unit in ppoma_Crm
    you will have red light and so it will be impossible to create all
    dependent org data.
    Hoping i have been able to clarify how it works.
    Regards, Gerhard

  • Homogeneous System Copy - Installation of Database Instance not possible...

    I try to create a SAP NetWeaver 7.0 SR3 Portal based on a homogeneous SAP System Copy. Therefore I already installed in a first step (first option within SAPINST for installing a target system of a system copy) the Central Services Instance successfully on a machine. In the next step I'd like to create the Database Instance with SAPINST but I cannot choose the DB instance that I already created based on a restore within the new DB server (MS SQL 2008 Cluster installation). I can only choose the local machine for using a DB instance but there is no MS SQL Server installed!
    Do I have to start SAPINST on the DB server itself which is not possible/allowed (due to operating/organization reasons)?
    Is there any SAPINST parameter which I have to use for telling SAPINST that the DB is located on a different server?!?
    The documentation just says:
    The target system is installed using the exports from the source system.
    Choose the installation services exactly in the order they appear. For more information, see the MS SQL Server installation guide for your SAP system at http://service.sap.com/installnw70.
    On the SAPinst screen SAP SystemDatabase make sure to select Homogeneous System Copy (MS SQL Server-specific: Detach/Attach or Backup).
    Thanks for supporting and Regards,
    Claudio Schmidt

    OK, SAP Note 1076022 says:
    SAP installation packages on SAP Service Marketplace
    On March 27, 2008, SAP released the Netweaver installation package SR3, which supports SQL Server 2008 (R2). Note 1152240 discusses the details and lists some restrictions. Make sure you carefully read Note 1152240 and use a recent enough installation master DVD.
    SAP Note 1152240 says:
    If you want to perform a system copy of an SAP system that is based on SAP NetWeaver 7.0 SR3 on SQL Server 2008 (R2), you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace (SMP). Instead, you have to do the following:
    - Patch your runtime libraries as described in SAP note 684106
    - Use a modified Installation Master DVD. For more information, see section "IV Creating a modified Installation Master DVD".
    - Use a modified Kernel DVD. For more information about how to create a modified kernel DVD, see SAP note 1480785.
    What problem is fixed by using the modified Installation Master DVD? Is it possible to install the DB part on a server apart of the local machine where SAPINST is run (my initial question/problem I want do resolve)?
    Regards,
    Claudio

  • Logon is not possible because you have not been assigned to a business role; please contact your system administrator

    Hi experts,
    I'm having a problem when our project approaching the end.
    If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
    It works fine,and the user can logon the web ui.
    Now I created a new organization model and position,assigned the business role and user to the position.
       A PFCG role was also assigned to the business role:
    Then I removed all the roles and profiles in user master in SU01.
    The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
    Can anybody suggest what the problem is? Is there any other settings I should make?
    I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
    Am I correct?
    Thanks.
    Jerry

    Jerry, yes, you're right.
    Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
    So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
    1. From user's parameter  CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
         If  CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
    2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
    3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE);

  • "Account determination for entry CHFS BSX 37AP not possible" -goods receipt

    I have a student using ECC 6.0 getting the following message when posting a goods receipt for a purchase order:
    "Account determination for entry CHFS BSX 37AP not possible"
    This is in the Fitter Snacker configuration phase 2 client, but now doing the configuration for the Marshall Muffler Company case. No other student has this message. I have checked everything that I can think of -- company, plant, purchasing organization, G/L account numbers, vendors, materials, quanity and value updating, valuation grouping code, automatic postings for inventory posting (BSX), controlling area, .. but cannot find anything amiss.
    Can anyone help with this? We are client 625 on the moscow server at Chico. The student is user 625-037, using 37 as a prefix for the various components e.g. company code 37MM. One PO for exampe is 4500000116. The student has created a number of orders trying to get it to work. Strangely, the student did get one raw material received on one PO for a vendor earlier, but now cannot do so.

    1st thing to do is understand the error message format.  - comp. code - transac - valuation class.  so you need to tackle BSX part. 
    goto transaction code OMS2 make sure the Mtype for Raw materials (RM) , Semifinished (SP) and Finished (FP) is selected for Quantity / Value updating tick box.  You can check this by going clicking Quantity/valur updating on left  hand panel.
    then goto transaction code OBYC for BSX transaction , make sure your plant it is assign to the correct valuation classs 3000. save everything.
    now try goto transaction code MIGO to cerate the GR again.   Normally if you don't maintain the BSX properly, you bond to have similiar error for WRX.   so please make sure that is also taken care off.    
    Now you should be fine creating the GR.  Good luck.

  • PSE 12 Organizer is not working.

    I just purchased and installed PSE 12 on my MAC HD its a 3.2 GHz Intelcore i3..... The editor works but the organizer does not?! I have updated my mac and adobe reader. What else do I do? Editor is useless without the organizer because it wont save any of my work.

    If you use the same profile folder with places.sqlite with both versions then you shouldn't do that. It is quite possible that the 4.0 beta versions update places.sqlite and that using that updated file with an older version has corrupted places.sqlite.<br />
    You should always use separate profiles when testing other (beta) versions.
    See http://kb.mozillazine.org/Testing_pre-release_versions
    See also http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
    You can try a validation check of places.sqlite.
    Copy and Paste this code in the Code field in the "Tools > Error Console" and click the "Evaluate" button to cleanup and compress the places.sqlite database file.
    <pre><nowiki>Components.utils.import("resource://gre/modules/PlacesDBUtils.jsm");PlacesDBUtils.checkAndFixDatabase();</nowiki></pre>

  • Can it not possible that i can retrive it for all line items in a single qu

    I have to make report for my application in which I am facing a following problem:
    In the application there are multiple suppliers and each supplier having multiple line items and each item having multipale events. each evant having three status GREEN,RED and BLUE.
    When a user select 'all suppliers' to show the the status time span for a supplier (i.e. for a supplier how many parts and upto how much time parts are in blue, red and green status)
    to show the cumulative status time span I have to find out a event for each line item which is having nearest lower entry time from the lower part of the given time span.for this i have write following query
    SELECT * FROM parts_events
    WHERE vendorid = ? AND partid = ?
    AND visible = 'visible' AND active = 1
    AND entrytime = (SELECT MAX(entrytime) as
    entrytime from parts_events
    WHERE vendorid = ?
    AND partid = ?
    AND entrytime < ?
    AND visible = 'visible'
    AND active = 1)
    the problem is that i have to fire this query for each line item, can it not possible that i can retrive it for all line items in a single query?

    maybe if you can post some sample data and output will help us analyze more youre requirement.

  • Transaction type 100 not possible (posting to affiliated company)

    Hi All SAP Guru's
    I am trying to post asset acquisition through F-90
    Asset Dr Transcation Type 100
    To, Vendor Cr
    while saving the above document  i am getting an error Transcation type 100 is not possible (Posting to Affiliated Company)
    to explain further my client are using Trading Partner Concept, may be that is the reason document is not getting posted
    In Transcation Type I tried to change Post to affiliated Company then system allowing to post the document, but in real sense we should not give post to affiliated company at Transcation Type
    can anybody help, is there any alternative to go ahead
    Regards
    Sreenivasulu
    Edited by: sreenivasulu VAS on Feb 26, 2009 1:57 PM

    Hi,
    When there's a trading partner in the document, you need to use a different transaction type for external acquisition.
    Have you tried this? (I've used this one. without chaging document type setting)
    150     Acquisition from an affiliated company
    Difference from Transaction type 100 is posting type. 150 has a posting type of 'Post to affiliated company' whereas 100 has not.
    Check with IMG (T-code: AO73)
    Heeseon.

Maybe you are looking for