OSA - check status to sent notification

Hi All,
I have a process flow for appraisal form where Employee ==> appraiser A, Appraiser B ===> Manager. Employee send the form simultaneously to Appraiser A, B. Manager will only access the form when both A, B complete their comments/ratings. Since the form is for A, B to complete without any sequence, how can we check that both A,B have completed the form and send a email to the Manager. Do we need a batch program to check the status or is the status flow functionality is capable of doing the check?
Your advice is very much appreciated.

Hi Maurice,
How to define the "last part appraiser", if we have more than 2 part appraiser, which part appraiser will be recognized as "last part appraiser " ?
Is the last part appraiser sort by the order which part appraiser enter into the document, or any other indicator?
thanks a lot for your reply & hope to hear from you.
Best Regards
Tao Cheng

Similar Messages

How to check status of sent PO related IDOCS to XI...

Hello Experts,
I was just given a task to create a report wherein I need to check the status of
all PO(purchase order) related IDOCS that are sent to XI. Please tell me the steps on how to
check if those IDOCS are sent successfully or not.
Hope you can help me guys. Thank you and take care!

Hi,
In TCode- WE05 or WE02 you can check the status of idocs.
Status 03 says :'Data passed to port OK', it means Data has reached to ur Destination(In ur case its XI).
So just explore the above Tcode and see how you can fetch the status.
Thanks.
Note:Reward points if you find useful.

Please explain why I have not received my $200 iPhone 6 Trade In Promo Gift card. I sent it to Trade In Center in packaging sent to me by Verizon on November 26, 2014. I have called the Trade In Support team 877-835-2024 to check status and receive a di

Please explain why I have not received my $200 iPhone 6 Trade In Promo Gift card. I sent it to Trade In Center in packaging sent to me by Verizon on November 26, 2014. I have called the Trade In Support team 877-835-2024 to check status and receive a different response each time I call. 1)it was received and it takes weeks/months to perform analysis on the device 2) you sent it to the wrong address 3) just wait 4) i will 'expedite' your issue. I've asked to speak with supervisors and the CSR will not let me speak with anyone confirming 'you will just be told the same thing I am telling you'. Well - nothing ever comes of it. Please assist. I have been a Verizon customer for years and am frustrated with the lack of customer care. Like many others I am ready to switch carriers.

I wanted to add my voice to the growing chorus of people complaining about VZW's trade in program. i received the exact same excuse for denying the full value of my perfectly good and DEACTIVATED iphone 4s.
i DID manage to get through to the trade in team, and after explaining the situation, i was told that my problem could be escalated the the tech team. the anonymous trade-in woman transfers me to the normal VZW cust support line... huh?
i wait again and finally get through. unlike the trade-in woman, the cust support rep immediately identifies himself. willie was as helpful as he was allowed to be, but sadly, that wasn't very much. the trade in people and VZW hold all of the cards.
THEY say that the de-activation lock wasn't turned off, i say it was.
there is no way to prove either assertion.
there is no appeal.
they just deny, deny, deny, as evidenced by all of the other complaints posted here and elsewhere.
willie WAS able however, to get me an additional credit for my 'inconvenience'.
while i genuinely appreciate his effort on my behalf, it doesn't absolve the company from the way they handle the trade-in program, whether it's farmed out to a 3rd party or not.
i will be filing complaints with the PSC, BBB, and NYS Att'y General.

Work Order check while completing PM Notification

Dear Friends,
I want a check in my PM Notification. while the notification is completed the related work order status should be "Technically completed". Can this be achieved by config?
thanks & regards,
Sudhahar R

Hi,
There is no configuration that allows this type of check.
You could use a exit such as QQMA0014 to prevent completion based on your own logic.
Possibly prevent notification completion when there is a order attached, then notification can only be completed when order is completed from IW32.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS topics

Set a User Status for Quality Notifications only if they are "Activated".

Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?

Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status.

Check status of workflow component.

I `d like to have command line monitoring to check status of main workflow components which for me are "Notification Mailers" and "Agent Listeners" and "Service Components".
I can see status of them in workflow manager as up.
I am wondering if there is any package, table or command which I can run from shell and get their status the same as it is shown in workflow manager.
I really appreciate any comment

Addition to previous post, I found FND_SVC_COMPONENTS table has status of all main component.
However last_update_date on this tables shows me data in table is older than a month. I am wondering if anyone knows how this table is being populated and how often,
Thanks

PPPI Process messages and check status

Hello.
Does anyone know of any method from xMII to get and check status of process messages sent to PP-PI?
E.g. check for status (has it been sent) and for any errors?
BR
Poul.

Hi Poul,
I found a few RFCs which might do the job and will list them here so you can test them:
PROCESS_MESS_DOWNLOAD
PROCESS_MESS_EXCHANGE
PROCESS_MESS_GET_RETURN_CODE
PROCESS_MESS_UPLOAD
My search method is kind of funny. I put PROCMESS* into the search pattern of a SAP_JCo_Interface action block to return a list of related action blocks. But since I can't use BAPI in SAP and must rely on SE37, I can't readily see the documentation to determine relevance. But I suspect you can take if from here. I would be interested in knowing what you come up with for these.
I also tried PROCMSG* and get these:
BAPI_HU_PROCESS_MSG
BAPI_HU_PROCESS_MSG_DIRECT
BAPI_LIKP_PROCESS_MSG
BAPI_LIKP_PROCESS_MSG_DIRECT
Where HU stands for Handling Unit, but I can't seem to find out what LIKP refers to.
Hope this helps and maybe together we can get the information.
Thanks,
Mike
Found a couple more
RSAP_GET_MSG_TEXT
RSSM_GET_MSG_TEXT
You may also be able to use RFC_READ_TABLE, but I do not know the table structures which would be of interest.
Edited by: Michael Appleby on Jul 16, 2008 3:07 PM

How I can check status of a database link in runtime?

I need check status of a database link from my application in runtime.
There are any view or table where I can find this information?
Any function or package?
Thanks!!

SQL> create view test_view as select dummy from [email protected]
2 ;
View created.
SQL> select dummy from test_view;
D
X
Execution Plan
0 SELECT STATEMENT (REMOTE) Optimizer=CHOOSE
1 0 TABLE ACCESS (FULL) OF 'DUAL' FIRST9.XXXX.COM
Statistics
7 recursive calls
4 db block gets
2 consistent gets
0 physical reads
212 redo size
363 bytes sent via SQL*Net to client
425 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
NOW WE PULL OUT THE NETWORK CABLE connecting the two servers.
SQL> select dummy from test_view;
select dummy from test_view
ERROR at line 1:
ORA-02068: following severe error from FIRST9.XXXX.COM
ORA-03113: end-of-file on communication channel
So all you have to do is to test for the communications error.

Change the status of the notification center in iPhone programmatically or atleast read what the status is for a particular application

Is it possible to control and change the status of the notification center in iPhone for a particular application.
1)      In the application push notification is implemented.
2)      Once this application is installed we can see the app in the notification center.
3)      There is an option to ON or OFF
4)      In the application we need an option to check if the above option is ON or OFF.
5)      If the option is OFF we need to provide the user an alert stating that in the notification center has it option off and here we have to provide an option to user to switch ON the option at the notification center.

Well, I could find a fix for that.
My mistake was that 1: I wasn't getting the correct ntype code for my value list type. And 2: I wasn't giving the Id name.
The new result came as this:
statusObjRef = doc.getStatusRef();
statusHome = IBeanHomeLocator.lookup(session,statusObjRef);
status = statusHome.findUniqueByNameType("Drafting Agreement", 1);
doc.setStatusRef(status.getObjectReference());
In case anyone has this problem, you should check the collection of values internal id, that's the actual ntype code (the number you send on the second parameter).
But I could still use help having some advice on the Master Agreement elements handling (getting data from the master agreement or the data thas is being edited at the moment before saving).
If anyone could give some advice, they would be very welcome

Trade in iphone checked status -paid no payment received

Like post name it i did trade in iphone checked status online "paid" never received payment,good luck calling customer service very frustrating

Similar story here. Sent my 4s for trade-in, got $15.30 GC, appraised value was $85. I did some homework on this before I submitted and almost convinced myself that this was going to happen......here's my story.
The power button on my 4s didn't function. I used the accessibility feature to power down the phone. To turn it on, it needs to be plugged in by the power cord. I "chatted" with a Verizon rep to see if it would still qualify for the full appraisal value. Their response was "As long as it's still functional, you should get $200 trade in towards the new iPhone". I wasn't trading in for a new Iphone, however, this was all I needed as proof. Low and behold, when I sent my 4s in, I get an email 2 weeks later for a gift card in the amount of $15.30. When I checked the reason for the dimished value, it states "Device does not power on". Trying to drum up some complaints because I saw this coming. I offered to send in pictures of my working phone and other documents. Not sure if I'm gonna get the $69.70 I'm owed, but I'm certainly gonna try! All this aggravation for a 10+ year customer. Thanks, VZW! If I don't get any satisfactory results, going to the attorney general. Might be years before I get a satisfactory result. Any VZW moderators on here have any suggestions on how to resolve these issues??? It's obviously a widespread problem. Just trying to get what we are owed!

SRM 7.0 Modify POWL for shopping cart check status screen

HI Experts,
The standard settings in check status for SC in SRM 7.0 is to display the sc with item level. This causes the SC number to be repeated (for no. of items in SC) and all links open the same SC in a new window.
We want to display only the header of SC and no item data should be displayed in check status.
I tried
SRM Server->Cross-Application Basic Settings->POWL and Advance Search->Adjust POWL Layout,search criteria and push buttons----choose feeder type SAPSRM_FEEDER_SC -double click field catalog-choose ITEM_DESCR, ITEM_NO, ITEM_STATUS---CHOOSE display and select HIDDEN COLUMN radio button.
This hides the corresponding columns but duplicate records are still showing.
Can some one please help?
Thanks,
Anubhav

Hi NM,
After performing the steps in first post for hiding item relevant fields you can filter the data displayed in the result by using the BADI /SAPSRM/BD_POWL_CHNG_SEL_RSLT .
In the BADI Delete the records from result internal table where SC num is repeated so that thers only one entry for each SC.
Let me know if it works for you or not.
BR,
Anubhav

Changing the dropdown values for one of the fields in CHECK STATUS query

Hi,
We are on SRM 7.1.
In the CHECK STATUS transaction,in the selection screen(QUERY),there is a field called "ROLE" which has teh dropdown values of "APPROVE BY ME","REJECTED BY ME" and "GOODS/SERVICES DELIVERED TO ME".Is there any way some of these drowpdown values can be removed?
Please advise.

hi nmsrm1234
i have a document for this issue.
but i don´t find this document in internet. it is called : CUSTOMER-SPECIFIC UI ADJUSTMENTS IN SRM 7.0 WEBDYNRPO ENVIROMENT / META DATA HANDLING CONCEPT.
if you can find it, you will get an idea to resolve this issue, if you will no have luck, please get me your mail, and i will send you the document.
regards.

Change the input parameter in Check Status screen

Hi,
I have a requirment to change the input parameter option in the check status screen. Currently when we search the SC using the date and staus from the extended search it picks the SC created date and displays the SC, my requirement is to make the date as the approved date insted of SC created date with the status as aprpoved.
Please suggest if this is possible with the help of any Badi.
Regards
GGL

I managed to find the solution myself. If anyone is interested, just follow those steps here:
http://apple.stackexchange.com/questions/44913/make-a-custom-keyboard-layout-the -system-default-even-for-the-login-screen
(terminal skills required tho)

Unable to check status of Warranty Return

) Hi, I recently organised a return for my Zen x-fi 32gb (around 3 weeks ago) Since then I haven't heard anything, so I've tried on numerous occasions to input my RMA number in the 'check status' page but it always tells me it isn't an RMA number, even though I know it is. I was wondering if any of the mods here could help me out with this? I tried again today and the page doesn't even seem to be working at all at the moment - very annoying!

Please check your PM.

Modify the Overall credit check status in Sales order

Dear all,
Good morning/afternoon/evening!
I have a question that how to modify the Overall credit check status (VBUK-CMGST) in sales order when the order saved?
I try to do this in USEREXIT_SAVE_DOCUMENT_PREPARE, but it does not works.
Maybe I need to do this in USEREXIT_SET_STATUS_VBUK ? But i also face the problem ........
Anybody who can give me a sufficient solution? I promise reward to you!!!
regards,
Brian Liu

Hi,
user function 1 in credit management by using
LVKMPFZ1 (FORM USER_CREDIT_CHECK1). If you branch into function module SD_ORDER_CREDIT_CHECK you can use the coding of FORM OLDEST_OPEN_ITEM_CHECK.
<b>Reward points</b>
Regards

OSA - check status to sent notification

Similar Messages

Maybe you are looking for