Osx does not recognise any DVD or disk inserted
Hi Everyone,
Since this morning I tried to use some disks on my MacBook Pro, (6,2) mid 2010, but the system did not load any of them and as long as I tried to insert one, it was espelled 5 seconds after without being loaded by the OS, I actualy tried to put a disk containing an updated version of Debian, and it would not load into MacOSX, but misteriousely, debian's installation started from the same disk and the same drive i tried to use on macosx .
It is actually quite strange because I cannot understand how it could be possible that the same disk actualy loads on the Boot and it does not whithin mac osx.
Any suggestion on how to solve ?
Thank you very much,
Regards
Another help source (if you haven't already done so).
Go to your OS Help Menu. In the search field type dvd
Click on all the troubleshooting topics & Support Articles that pertain to your issue.
You can also do the same in Disk Utility. Open same up.
At the bottom left of the window, click on the purple button w/the "?" in the middle.
This will bring up the Help Menu.
===============
Try a different brand. Top forum favorites
CDs
FUJI
TDK
Verbatim
DVDs
Maxell
Verbatim
==============
Apple's Disc Burning Quick Assist
http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive
Make sure the DVDs are not dirty, smudged and/or scratched.
http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
*** Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs. ***
Similar Messages
-
I have iPhone 6, 8.3. I cannot use bluetooth at all from my device, even to connect my macbook pro. I did all the recommended trouble shooting such as reboot and reset network settings. but it does not recognise any bluetooth device. Pls help.Thank you.
See iPhone BT profile on what can be connected/paired:
iOS: Supported Bluetooth profiles - Apple Support
And BT troubleshooting:
iOS: Troubleshooting Bluetooth connections - Apple Support -
My Iphone 4 does not recognise any bluetooth divice
my Iphone 4 does not recognise any bluetooth divice
Check the documentation for the Jawbone and put it in discovery mode. Turn bluetooth on for the iPhone and the Jawbone should show up on the phone. More than likely it will then ask for a passcode and that should be in the documentation as well. After that, they should be paired.
Use this link to go to the Jawbone ERA site if you need instructions on pairing. Select pairing with your phone and there is information on how to get the headset into pairing mode and the passcode.
Message was edited by: ChrisJ4203 -
HP dv7 notebook PC does not recognise the dvd burner.
HP dv7 notebook with win7 64bit does not recognise the dvd burner.A diagnostic check says the dvd is working but it cannot play or burn CDs,DVDs as the DVD does not appear with the other HDs in the computer window.Can anyone help?
Hi,
It's possible that this is a hardware issue with the optical drive itself, but try running automated fixit from Microsoft on the link below.
Windows 7
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
DVD drive does not recognise CD/DVD
Ok. SO recently my G42-230US notebook computer just does not play CD/DVDs. The drive opens, the green light appears on the side but when I go to my computer, my DVD/CR ROM drive does not appear. Can I get some help with this problem?
Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive is now working.
If the drive is still not working, from the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
i have updated my phone with the new 6 IOS. Since doing this my icloud account keeps saying that verification failed and the certificate for service is invalid. Folowin this problem my phone also does not recognise my other iphone contacts so i cannot facetime or send imessage
You don't need an app. You need couple's counseling. I believe what you want to do may also be illegal in many jurisdictions.
-
I upgraded iTunes on my pc and now it does not recognise any of my iPods or iPhones?
I upgraded my pc with the new iTunes and now it does not recognise my iPod or iphone
The apple ID as I did not see anywhere just for email address , but then the ID is the email address, original ID does not work with new or old password, but is displayed on the apps page on iPod when trying to update apps, so ID is changed on PC and all is well it is the iPod that isn't
-
iTunes recognises my iPhone 5s attached, but does not come up with the scanner/camera wizard giving me the option to upload pictures. I've tried going to control panel on the computer to try and open it that way, but it does not acknowledge that any devices with a camera are attached. It gives me the option to manually add one, but then it gets too technical for me. Anyone any ideas? Help will be greatly appreciated. - Thanks
(P.S. - I'm using Windows XP if that makes a difference).Hey Catherine Sian,
Thanks for the question. I understand that you are experiencing issues with your iPhone being recognized in iPhoto. The following resource may provide a solution:
iOS: Unable to import photos to computer
http://support.apple.com/kb/TS3195
Thanks,
Matt M. -
MATSHITA DVD-R UJ-857 Does Not Recognise writable DVD media
mbpro 2.16 Will not accept writable DVD's either blank or pre-writen. I have tried different makes. It will accept re-recordable media. Had the machine 9 months and the problem was only intermittant to start with but now permanent. HELP Please
hi birdman,
I'm having the same problem as you. The matshita drive was initially able to recognise a blank sony dvd-r i put in, was able to burn the dvd as well as read it. but after that, when i tried reading the same burned disc a few hours later, ironically, the drive wasn't able to recognise the very dvd-r it burned. Neither was it able to recognise any blank dvds.
guess i may have to go down to apple to replace my optical drive. -
My CD-ROM drive cannot detect CD's or DVD's. I have used the microsoft "fix it" tool and it doesn't detect that the driver is out of date nor does it need updating. I have tried uninstalling the driver via the control panel settings and restrating my laptop to see if it will reinstall the driver automatically but it always fails.
Does anyone have any suggestions??? I would be very grateful.
This question was solved.
View Solution.Hi:
You can try editing the registry.
http://www.ehow.com/how_4927228_use-registry-fix-dvd-drive.html
Paul -
Mac OSX does not recognise CS6 vs CC!
There is something wrong with the info.plist for Photoshop CC. Mac OSX Mountain Lion at least does not understand they are different applications. You cannot set files to open in CC instead of CS6. The OS believes they are the same application.
Annoying.The plists show them as different versions.
More likely is that your MacOS launch services database is corrupted. -
Mac OSX does not recognise MFP 1213nf
Reposting here since I have recently upgraded from Mountain Lion to Mavericks.
Original post (what I did when this machine was running Mountain Lion)
This is probably an obsolete system support problem.
This LaserJet Pro M1213nf is an old product from HP that I just recently (~3 months) purchased from a vendor as new. The MFP system is flawless and except for the occasional scanner tilt in grabbing the sheet from the automatic document feeder, works perfectly.
Unfortunately, when I bought it, I used an old Macbook with Snow Leopard to test it. Worked beautifully. I recently purchased a new Macbook Pro with Mountain Lion, and it does not work with that. This Macbook is going to be my primary system from now on.
Googling this problem has convinced me that neither HP nor Apple intend to support this, at least not anytime soon. Updating drivers from the store has not helped. In fact, each time it has happened, I have had to uninstall the new driver, and install the old Lion version of the drivers (see below).
Current status:
1. It prints without a problem. It copies too, but I don't really use that a lot.
2. It scans but only with the HP Scan application bundled with the Lion version of the driver. (which was the last major version where this was supported)
3. Image Capture, Preview, etc. do not work with this and the OS does not even recognize the scanner.
I installed sane-backends to work around the problem but I have not really invested a great deal of time into it and that did not help.
My question is - how do I hack it to work with my Mountain Lion install natively? I use Linux regularly, and have absolutely no issues compiling software, tinkering with things, using open source software, etc. My understanding is that Mountain Lion has changed the interface for scanners and that new interface is not available for older scanners.
Why do I need this to work? Well, I scan a lot of documents and there are some AppleScripts I want to use to do some standard post scan processing to reduce PDF size. The native HP scan application that comes with the drivers is an irritating piece of crap that wastes my time everytime I need to do something.
And I am not going to throw out a perfectly good MFP just because Apple and HP want to generate some undeserved profits off me. Good hardware always trumps artificial commercial software choices for this engineer.
I am now running Mavericks.The plists show them as different versions.
More likely is that your MacOS launch services database is corrupted. -
Would anyone please have any advice for an imac desktop 2010, that no longer reads CDs or DVDs. The CD drive ejects any disk without reading it including the system disk!
Your SuperDrive may need cleaning or replacement, if it's covered by AppleCare then make an appointment and Apple will replace it for free. If you don't have AppleCare then go to an office supply store and get a cd/dvd drive cleaning kit and use it. If that fails then make an appointment at your local Apple Store or AASP to have the machine serviced. Another alternative is buying an external DVD burner and connecting it via USB to your iMac. While not as ideal an internal drive it should work just fine.
-
Thinkpad L520 CD/DVD drive does not recognise or write to disks
Hi all. I hope as a newbie that I'm posting in the right area and not on a topic already covered. I've had my L520 for over a year now and have not previously needed to burn stuff to disk, so I do not know if my problem is new or old.
Essentially the drive recognises disks when they are inserted and accurately displays files already on the disk, but it gives available space as nil regardless of disk or existing file size. Additionally if a blank disk is inserted it will say that the disk cannot be read and to try formatting. These are standard preformatted disks I'm using. Please help.
Solved!
Go to Solution.Written and finalised disks do not appear to have any capacity left, it is the way the CD file system works.
As for the empty disks, they are just empty, not pre-formatted. It seems to me you need a disk-burning application like Ashampoo Burning Studio Free or CDBurnerXP, which are free for personal use...
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
DVD-Audio player does not detect any DVD-Audio sour
Hi,
I am trying to play a DVD-Audio disc on my computer using the DVD-Audio player software that came with my Audigy 2 card, but the software fails to detect my DVD-ROM dri've as a DVD-Audio source.
I can play audio CDs and DVDs with no problems using the DVD-ROM dri've.
The OS is WindowsXP Pro with SP and I have the latest patches applied to both driver and DVD-Audio player software.
I would appreciate any suggestions if someone experienced this anoying problem and solved it.
Thank a lot!DVD Audio encryption security has unfortunately been hacked using the decoders within WinDVD from Intervideo.
As a result, DVD Audio playback using the WinDVD/Audigy combination has been suspended on "new" versions of the software.
I am a registered user of WinDVD and upgraded to WinDVD 7 Platinum in June and DVD Audio was working fine.
I mistakenly downloaded an "upgrade" to WinDVD 7 at the end of July and found all my DVD Audio discs failed to play.
Intervideo (as usual) refused to respond to my technical support queries when I enquired as to whether the DVD audio support was removed in view of the breach of the DVDA encryption.
Thankfully the previous version was still available for download (after much searching on the web) - WinDVD.Platinum.7.0.Release.2.Build 27.07Using a new activation key from the Intervideo website STILL didn't enable DVDA playback on this previous version however.......... I was able to fudge this using the original purchase activation key by changing the PC system date to within 0 days of my initial activation key supply which I had stored in an email.Hey presto - back to WinDVD DVDA support!Intervideo are being very crafty.... they have updated the WinDVD website to remove all references to DVD Audio support and then were answering my technical support queries as if I wasn't configuring my PC correctly.
What versions of DVD Audio playback software are you using?
Creative DVDAudio player? WinDVD (version?)
Maybe you are looking for
-
Creating second user account on TC. No separate folder and security issues
Hi, I've had my TC for some time, and after some start-up triuble all is working very nicely now. That is, until I wanted to set up the TC for my girlfriends backups too. On my mac, i created a user account for the TC, and i see two folders when i co
-
This may be the wrong forum as I am not trying to burn or create a DVD, just play regular movies. The quality is atrocious. I can barely see the movie, it's all dark and cartoonish. Also, videos on YouTube are virtually unwatchable. Overall, the imag
-
Is there a way to burn old cd's with new cd's and get the same volume/quality on playback?
is there a way to burn old cd's with new cd's and get the same volume/quality on playback?
-
Back up and sync a large iTunes collection
My main computer is an iMac. I have an iTunes collection with 89,000 songs in it on that machine. I have baked the media up to an external drive along with the iTunes Music Library document. What I would like to do first is be able to plug my externa
-
DataGrid used as Tree Item Renderer
Has anyone out there used a DataGrid as an itemRenderer for the leaf nodes in a tree? I am attempting to do so by extending the TreeItemRenderer class. Do I have to make a DataGrid custom component to use?