OTL Projects Requirement

Hi All,
I am working on Oracle Time & Labor customization requirement.
I need to make certain column in the Time Entry Layout as hidden. I have tried using component type as "HIDDEN_FIELD". But in that case, the column value is just hidden but the column still appears on the screen. I have also tried unchecking the checkbox Node Display for that component from the AK Developer, but still no luck.
Anyone has idea how to achieve this?
Also there is requirement for making this field available for other responsibility. As per my knowledge personalization cannot be used for this requirement as the fields (which are developed through layout) are not seen in the personalization screen. Then how can we achieve that?
Regards

user622474,
You can't hide columns based on responsibility inside timecard matrix. You can make it hidden permanently, but again this column is part of standard validations set for projects and hence hiding will cause errors on timecard submission.
Change/modify the requirement as per the feasibility.
--Shiv

Similar Messages

OTL Projects and OTL Element link?

Hello,
I have a reporting requirement to display OTL projects information, and OTL element information for a given employee. I have a query that's gets me the project information and I have a query that gets me the element information (OUT OF OTL), but I can't seem to figure out how to link the two queries to together. Has anyone done something like this before?
I can post the queries if that would help.

Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

Hello all,
I can't open a PP project without this error message appearing:
"The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
1. How to fix this?
2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
Other older PP projects of mine open and work fine.
Premiere Pro CC 8.2.0
Media Encoder CC 8.2.0.54
OSX 10.10.2
Any help would be greatly appreciated.
Duncan.

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Showing multiple expenditure types in OTL Projects Timecard Layout

Does anyone know how to limit the expenditure types that show up in the standard OTL Projects Timecard Layout? I have two expenditure types for straight time classifications, Labor and Contingent Labor and I only want to show Labor for employee timecards. I can limit the expenditure type in the Projects-Purchasing Layout using Alternate Names, but that doesn't seem to work for the standard projects layout? Any help would be appreciated! Thanks for your assitance!

We were able to customize the list through the view for the expenditure types.

Need estimation for an OTL project

I need to reply on a RFP which includes OTL requirments.
Can any one give an estimation for OTL Project with complicate Attendance requirments?
Thanks a lot
Rachel

Rachel
I'm going to reply privately as the response may not be of general interest.
Regards
Tim

Trying to create LOV in OTL -Project timecard.

Trying to create LOV in OTL -Project timecard.
Error Message :Cannot find LOV view object (LocationLOVVO) in LOV AM.
Please suggest where I am wrong
while creating the LOV.
code for layout:
BEGIN HXC_LAYOUT_COMPONENTS "Projects Timecard Layout - Location"
OWNER = "ORACLE"
COMPONENT_VALUE = "LOCATION"
REGION_CODE = "HXC_CUI_TIMECARD"
REGION_CODE_APP_SHORT_NAME = "HXC"
ATTRIBUTE_CODE = "HXC_TIMECARD_LOCATION"
ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
SEQUENCE = "240"
COMPONENT_DEFINITION = "LOV"
RENDER_TYPE = "WEB"
PARENT_COMPONENT =
"Projects Timecard Layout - Day Scope Building blocks for worker timecard matrix"
LAST_UPDATE_DATE = "2004/05/24"
BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Projects Timecard Layout - Location"
OWNER = "ORACLE"
QUALIFIER_ATTRIBUTE_CATEGORY = "LOV"
QUALIFIER_ATTRIBUTE1 = "LocationLOVVO"
QUALIFIER_ATTRIBUTE2 = "N"
QUALIFIER_ATTRIBUTE3 = "CuiLocationLovRN"
QUALIFIER_ATTRIBUTE4 = "809"
QUALIFIER_ATTRIBUTE5 = "12"
QUALIFIER_ATTRIBUTE6 =
"HxcCuiLocationCode|LOCATION-DISPLAY|CRITERIA|N|HxcCuiLocationId|LOCATION|RESULT|N|HxcCuiLocationCode|LOCATION-DISPLAY|RESULT|N"
QUALIFIER_ATTRIBUTE8 = "LocationCode"
QUALIFIER_ATTRIBUTE9 = "LocationId#NUMBER"
QUALIFIER_ATTRIBUTE10 =
"oracle.apps.hxc.selfservice.timecard.server.LocationLOVVO"
QUALIFIER_ATTRIBUTE17 = "OraTableCellText"
QUALIFIER_ATTRIBUTE20 = "N"
QUALIFIER_ATTRIBUTE21 = "Y"
QUALIFIER_ATTRIBUTE22 = "L"
QUALIFIER_ATTRIBUTE25 = "FLEX"
QUALIFIER_ATTRIBUTE26 = "PROJECTS"
QUALIFIER_ATTRIBUTE27 = "Attribute4"
QUALIFIER_ATTRIBUTE28 = "LOCATION"
LAST_UPDATE_DATE = "2004/05/24"
END HXC_LAYOUT_COMP_QUALIFIERS
END HXC_LAYOUT_COMPONENTS
VO Query
select location_id , location_code from hr_locations

Is this issue only on one PWA instance? From your opening paragraph am I correct in thinking this works fine on another PWA instance on the same farm? Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Java editor : NullPointerException : non-null project required

hi
While editing a Java source file, I get this exception on the "jdev.exe console" :
Warning, runtime exception caught: java.lang.NullPointerException: non-null project required
java.lang.NullPointerException: non-null project required
        at oracle.jdeveloper.java.JavaManager.getJavaManager(JavaManager.java:73)
        at oracle.jdevimpl.java.Context2ParserHelper.getJavaManager(Context2ParserHelper.java:113)
        at oracle.jdevimpl.java.Context2ParserHelper.getSourceFile(Context2ParserHelper.java:124)
        at oracle.jdevimpl.java.editing.JavaSmartClipboard.getSourceFile(JavaSmartClipboard.java:182)
        at oracle.jdevimpl.java.editing.JavaSmartClipboard.isInStringLiteral(JavaSmartClipboard.java:382)
        at oracle.jdevimpl.java.editing.JavaSmartClipboard.fillClipboard(JavaSmartClipboard.java:253)
        at oracle.jdevimpl.java.editing.JavaSmartClipboard.copy(JavaSmartClipboard.java:218)
        at oracle.jdevimpl.java.editing.JavaSmartClipboard.invokeAction(JavaSmartClipboard.java:100)
        at oracle.jdevimpl.java.editing.JavaEditingPlugin.invokeAction(JavaEditingPlugin.java:585)
        at oracle.javatools.editor.BasicEditorPane.invokeAction(BasicEditorPane.java:1949)
        at oracle.ide.ceditor.keymap.IdeKeymapHelper.invokeAction(IdeKeymapHelper.java:181)
        at oracle.javatools.editor.keys.MultiKeyHandler.keyPressed(MultiKeyHandler.java:334)
        at java.awt.Component.processKeyEvent(Component.java:5446)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2713)
        at java.awt.Component.processEvent(Component.java:5265)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3955)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1810)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:672)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:920)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:798)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:636)
        at java.awt.Component.dispatchEventImpl(Component.java:3841)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Window.dispatchEventImpl(Window.java:1774)
        at java.awt.Component.dispatchEvent(Component.java:3803)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)This happens with things like Ctrl+C (copy) or Ctrl+Space (code insight).
Typing characters still works, but I would like some other basic features like "copy and paste" to work again.
Any suggestions?
(using JDeveloper 10.1.3.2.0.4066)
many thanks
Jan Vervecken

Thanks for the update Brian.
At first I had never heard of the name "PoemaFenix.jws" and because of that I thought it was JDeveloper that added the "Fenix" suffix because of some illegal state.
But because of your update today, I looked into this and found some references to "PoemaFenix.jws" in the "dependencyList" of some of our .jpr files as "sourceOwnerURL". (These could have been introduced a while back when someone rearranged some of our project files, although I haven't been able to get this confirmed.)
Anyway, I did not try the workaround you suggested, but I updated the .jpr files replacing "PoemaFenix.jws" with the correct name "Poema.jws" and I was not able to reproduce the issue using the scenario I used before. So, that looks like it solved the issue here (and the activeWorkspaceURL is <path>Poema.jws again).
I also tried the following scenario to check how this could have been introduced:
(1) create an application "MyFirstApp", resulting in "MyFirstApp.jws"
(2) create two empty projects "Model" and "ViewController"
(3) configure the ViewController project to be dependent on the Model project
(4) Save All, and click the "Remove from Applications" icon while "MyFirstApp" is selected in the Applications Navigator
(5) on the file system rename "MyFirstApp.jws" to "MySecondApp.jws"
(6) open "MySecondApp.jws" in JDeveloper
(7) on the ViewController project properties dependencies panel toggle the checkbox for the Model project off and on again, click OK
This resulted in a "ViewController.jpr" file containing this:
   <hash n="oracle.ide.model.DependencyConfiguration">
      <list n="dependencyList">
         <hash>
            <value n="class" v="oracle.jdeveloper.library.ProjectLibrary"/>
            <url n="sourceOwnerURL" path="../MyFirstApp.jws"/>
            <url n="sourceURL" path="../Model/Model.jpr"/>
         </hash>
         <hash>
            <value n="class" v="oracle.jdeveloper.library.ProjectLibrary"/>
            <url n="sourceOwnerURL" path="../MySecondApp.jws"/>
            <url n="sourceURL" path="../Model/Model.jpr"/>
         </hash>
      </list>
   </hash>I would think the reference to MyFirstApp.jws should no longer be there.
(Maybe the sourceOwnerURL values should be updated in step (6) of the above scenario, which is also not the case.)
regards
Jan Vervecken

Reversi Sample - "The project requires user input. Reload the project for more information."

A week ago, I downloaded the sample code examples. Then I extracted the reverse sample code, loaded it and ran it. All was well.
I was just using it as a resource for example code, so no code changes. Now, when I open the project, I get nothing loaded.
Solution explorer displays Solution 'Reversi' (0 Projects). Below that
"The project requires user input. Reload the project for more information."
This message shows for all three sections Reversi, ReversiGameComponet, and ReversiComponentTests.
Ok, so I figure I must have accidently changed something. So, I re-extract. Same message.
The only thing I can think of is that in the options, I changed the startup location for my projects. I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8. I've always done this so that when I create a new project,
it does it in my project directory by default. Didn't change anything else such as the templates dir.
I did set this back to the c:....projects, as where templates are, but that didn't help. So, I reset to my projects directory.
My project that I created loads ok.
Suggestions?

A week ago, I downloaded the sample code examples. Then I extracted the reverse sample code, loaded it and ran it. All was well.
I was just using it as a resource for example code, so no code changes. Now, when I open the project, I get nothing loaded.
Solution explorer displays Solution 'Reversi' (0 Projects). Below that
"The project requires user input. Reload the project for more information."
This message shows for all three sections Reversi, ReversiGameComponet, and ReversiComponentTests.
Ok, so I figure I must have accidently changed something. So, I re-extract. Same message.
The only thing I can think of is that in the options, I changed the startup location for my projects. I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8. I've always done this so that when I create a new project,
it does it in my project directory by default. Didn't change anything else such as the templates dir.
I did set this back to the c:....projects, as where templates are, but that didn't help. So, I reset to my projects directory.
My project that I created loads ok.
Suggestions?
Hi there,
Can you provide the link for the sample code example so I can download and try on my machine?
Regards,

Need help in design/framework of a project requirements

Hi there.
I need some input/design suggestion and/or comments regarding 2 projects that I'm undertaking currently. The project duration is 8 weeks starting now.
Some background information of the current technology we are using right now. We are using weblogic 7.0 SP2 and our database is ms sqlserver 2000 and/or mysql. The persistance layer/framework we are using is a home grown JDBC framework. We are using only stateless session beans and our client which is a swing ui access the servers side thru webservices via a session facade. We use also Transfer objects on the client and our own DataObjects on the server side. Current consideration is that we can not upgrade to the current weblogic version at this time and can only use java 1.4 and use existing persistence framework we have. I've considered using Spring/Hibernate but it will involve major refactoring on our existing system, which we can not afford right now. But we can augment or add new framework to handle this 2 projects.
1. The first project is a mass update/creation of orders and order items. In our system the update and creation of order and order items are complicated and perform several validations (e.g. vendor/client is valid; item are valid and have enough to on-hand, etc.) and lookups before we can create/update an order and it's order items. We estimated that process to be around 1.5 - 3.0 secs and typically we will be processing between a few hundreds to about 5000. The max ceiling we put is 10,000.
Now the requirements are:
a. Ensure that the process will be completed and in the event of failure (physical or network or power) and recovery to start where it failed and start processing from that point of failure.
b. The transaction should be atomic on per order basis and not on whole process - meaning we will commit all changes for an order and start a new transaction on the next order. This will ensure that we have a complete order committed.
c. Don't tie the client from this process and when the process is finished give a feedback to the client who invoke the process.
2. The second project is related to the first, is that before they post the process above, the user will look at the set of data and do some editing and then post the data. So this project is on the UI side and would present the user a table/grid view of the data and since data set could be large, we want our swing ui to fetch only a set of rows/data so that it does not take so long to load all the data or run out of memory. A button or by the user scrolling on the scrollbar would fetch the next succeeding rows/data. The problem we have as stated on the first paragraph is these- we are using webservices and stateless session beans and there is no way that the server can recognized who the user is when that user request the next set of row/data set without querying the database again.
So your input and help is very much appreciated and if you know an existing framework that would help me is most welcome.
Have a blessed day.
Jun Victorio

Take the statistics of the tables and check again.
begin
DBMS_STATS.gather_table_stats(ownname=>'syslog',tabname=>'logs');
end;
Regards
Asif Kabir

ANN: Eclipse EJB 3.0 Object-Relational Mapping Project Requirements posted

A document that presents an intitial feature and use case list for the early milestones of the Eclipse EJB 3.0 Object/Relational Mapping project has been posted to the project newsgroup (news://news.eclipse.org/eclipse.technology.ejb-orm). It also demonstrates a set of user interface components for editing EJB 3.0 Entities. The document covers the basics and is designed to illustrate the concept. It is in no way comprehensive. For example, it doesn't thoroughly cover the editing of ORM xml descriptors although this is an important requirement for the project. ORM xml support will be detailed in coming revisions, and slated for future milestones.
The purpose of this document is to invite comment on the approach. If you are interested in EJB 3.0 Entity support in Eclipse please give the doc a look over and post your feedback to the EJB 3.0 Object-Relational Mapping Project newsgroup.
Newsgroup: news://news.eclipse.org/eclipse.technology.ejb-orm
Simple Web Interface http://www.eclipse.org/newsportal/thread.php?group=eclipse.technology.ejb-orm
--Shaun Smith
Project Overview:
The goal of this project is to add comprehensive support to the Eclipse Project for the definition and editing of Object-Relational (O/R) mappings for EJB 3.0 Entity Beans. EJB 3.0 O/R mapping support will focus on minimizing the complexity of mapping by providing creation and automated initial mapping wizards, and programming assistance such as dynamic problem identification. The implementation will be extensible so third party vendors can add to its functionality.
Project Proposal:
http://www.eclipse.org/proposals/eclipse-ejb30-orm/index.html

A document that presents an intitial feature and use case list for the early milestones of the Eclipse EJB 3.0 Object/Relational Mapping project has been posted to the project newsgroup (news://news.eclipse.org/eclipse.technology.ejb-orm). It also demonstrates a set of user interface components for editing EJB 3.0 Entities. The document covers the basics and is designed to illustrate the concept. It is in no way comprehensive. For example, it doesn't thoroughly cover the editing of ORM xml descriptors although this is an important requirement for the project. ORM xml support will be detailed in coming revisions, and slated for future milestones.
The purpose of this document is to invite comment on the approach. If you are interested in EJB 3.0 Entity support in Eclipse please give the doc a look over and post your feedback to the EJB 3.0 Object-Relational Mapping Project newsgroup.
Newsgroup: news://news.eclipse.org/eclipse.technology.ejb-orm
Simple Web Interface http://www.eclipse.org/newsportal/thread.php?group=eclipse.technology.ejb-orm
--Shaun Smith
Project Overview:
The goal of this project is to add comprehensive support to the Eclipse Project for the definition and editing of Object-Relational (O/R) mappings for EJB 3.0 Entity Beans. EJB 3.0 O/R mapping support will focus on minimizing the complexity of mapping by providing creation and automated initial mapping wizards, and programming assistance such as dynamic problem identification. The implementation will be extensible so third party vendors can add to its functionality.
Project Proposal:
http://www.eclipse.org/proposals/eclipse-ejb30-orm/index.html

CRM project requiring offline adobe form functuonality - at what effort?

I have a requirement to implement an adobe form as part of a larger CRM project. The users of the CRM application (Sales - Web Client) will utilise adobe functionality while online to create prefilled customer visit forms which they will copy to their outlook application. The adobe form will then be used in offline mode to record details of their customer visits whilst the sales person is in the field. The visit details will need to be sync'd at a later stage back to the CRM server. I have a question as to the effort required to set this up both from an analyst and programming perspective.
Am i right in assuming the creation of the adobe form would not be that time consuming (as we intend the form itself to be relatively straight forward) and the time will be primarily taken up in developing the interface to initially create the adobe form and then to take the data back into the CRM system once the form is completed.
What kind of effort are we talking about
Thanks in advance
Eddie

Hi Satya & sanjyoti,
I am facing a pecular problem in using Adobe forms.
I am able to pass data from webdynpo application, to the Interactive form(using mappings, as mentioned by satya).
But for the same form & WD application, i am not able to pass data from the Interactive Form, back to the WD application.
My scenario is like this:
I need to show a form, with some prefilled data, such as date, userID, etc. I populate the node in my WD application, & then call the form.
The form displays the above prefilled data. Now the user has to fill the remaining fields & click on submit(Submit-to-sap button). The onsubmit property of the Interactive form is mapped to a onaction event, where WD tries to read the data entered by the user.
The problem is that on clicking of the submit button in the form, the event is not getting called.
If i use a button in the WD view itself, then the action gets called, but there is no data. In short, the data is NOT getting passed from Interactive form to WD application.
Can you please help me out with this?
Thanks,
Hanoz

Are 'projects' required when creating flex apps

hello;
I have spent 2 days doing several flex tutorials, and it seems everyone of them requires me to create a new project. Eclipse, then, automatically creates lots of files with names hardcoded into them.
I, personally, am uncomfortable with this approach: a tool creates my tool-shed automatically.
is there an alternative to developing flex apps in flash builder?
thanks.

After reading your response and rereading the original question a bit closer, the metadata prompting feature does not apply to creating new folders, only content.
Again, though, I think the focus here is in the wrong place. The metadata applied to a folder is intended to be ultimately applied to the content. You can build global rules that fire on submission of content to check if a field has a value, and throw an error if the value is empty.
If you expect users to create folders (and actually apply any metadata to the actual folder itself), you will be disappointed. Experience shows that users are not interested in that level of detail when creating content, let alone folders. Letting typical users create folders is a bad idea anyway, as they tend to create the same inefficient folder structures they previously created in file shares within Content Server.
If you need to tightly control folder attributes, you'll be better served by locking down the ability to create new folders. Otherwise you're looking at some type of customization. Keep in mind that you won't be able to customize the right click behavior of DIS. Any changes to DIS would have to be an enhancement request.

Customer Project Requirement

Dear experts,
my client requirement is like this
first he wents customer with praposal BOM like A Material with qty--1
                                                                      A1----
5 no.
                                                                      A2----
6 no
                                                                      A3 -
1 lot ( 100 meters Cable, 200 meters pipe.....)
                                              some other materials also like B(B1,B2.....), C(C1,C2.....)
after getting approval from Customer creats the sales oder from sales order project will create automatically.
after that Engineering Department will start detailed drawing of BOM that may difference from from praposal BOM. May be differrence in Quantities at sub item level and some componets adding or deducting at sub item level.
obviously project execution level aslo quantities will differ
1) here my client wants compare these three level costs ( praposal BOM, Detailed BOM, Actuals ).
how can i get these reports please suggest me.
2) in sales order level i entered praposal BOM only, while delivering there may difference in quanties i didn't understood how can i deliver this.
please give me your valuable inputs.
Regards
etr

closed

WLST scripts for deploying and migrating OSB project required

Hi,
I need sample/reusable WLST scripts for the following requirements:
1. deploying OSB project developed on workbench to the remote server.
2. migrating OSB project from Remote Server A to Remote Server B.
I know other mechanisms to register an OSB project with the server but appreciate if some one can share the above scripts and associated documentation with me.
Regards,
CC

http://download.oracle.com/docs/cd/E13171_01/alsb/docs21/deploy/config_appx.html
http://www.oracle.com/technology/sample_code/products/osb/samples/PARAMETERIZE.zip (other samples here : http://www.oracle.com/technology/sample_code/products/osb/index.html )

How to get XI projects requirements? What and i need to ask for Project ?

Hi Experts
    I know XI for some extend but i don't know any thing about requirements
    Next week i have meeting with client so what and all things i need to ask ?
    Pls...guide me on this
It will be really helpful to me.....
adv thanks and points to all
Regards
Kiran LVS

Hi Kiran
   In addition to the above link are the things you can ask the client to get the requirements
1) What is the problem? This will give answer for why they are going for XI? Here try to
    Understand the business as well as integration? Where XI come into the picture?
2) Total number of systems involved in integration? That is their SLD? Details?
3) Scenarios (interfaces)? Total? What kind of? But here once again this is depends on project
    Some times client will give this (or) based on the requirement you people have to decide?
    It is fully depends ..!!!! take care
4) Then based on the scenario you need to get the full information ....this is
    place where you can ask all the questions from scenario to scenario .get all the details as
    mentioned below
apart from the basics try to ask some thing technically
5) Are they providing any XSD,WSDL, documents, Naming conventions..etc
6) Protocals related like http, ftp, smtp, soap....
7) If file related then CSV, Fixed....like that delimiter specific details .very imp this one
8) If R/3 present then ....it is Idoc, Rfc, BAPI,....any proxies and webservices for
   direct communication ....etc
these are the basic things for XI integration project and after that every thing is specific to
scenarios
Same time check in the SDN with key word XI Requirements
I hope this will help you to face the client but before that try to understand the client business and systems..!!!!(Imp)
Regards
Prasad K

OTL Projects Requirement

Similar Messages

Maybe you are looking for