Outbound interface - device modification/reversal & device category change.

Hi Friends,
I have a requirement to trigger an outbound interface in the event of device modification/reversal and device category change.I couldn't find any event which gets triggered upon device modification and reversal.There are 2 user exits - call customer '001' and call customer '002' provided by SAP.However,both these exits do not get triggered on device modification.For reversal,there is no exit provided by SAP.I have actually written a code within if....endif..statement in the Zinclude and had put a breakpoint in the Z include of both the device modification exits.None seem to work.
Similarly there are no events/exits/BAdI's for device category change.I need to trigger the same outbound interface upon device category change.
This brings me to the conclusion that there is no standard way to do an activity upon completion of device modification/reversal and device category change.There are no BAdI's as well.Change pointer activation could be one of the solution.Could you please suggest an alternative solution.
Many thanks,
Raj

Hi Raj,
Please check if the default BAdI interface IF_EX_ISU_IDE_DATEXCONNECT is triggered during device modifications / removal.
Use the method IF_EX_ISU_IDE_DATEXCONNECT~DATEXCONNECT_BILLINGINST_CHNG to see if you can make use of it.
Thanks,
Imran

Similar Messages

  • Change of Device Category of a Device

    Hi
    Can anyone help me about the convenient process so that device category of device can be changed.
    Actually, my requirement is as follows:
    1. User creates a device E1 (External number range) under device category D1. Equipment and serial number are synchronous so equipment E1 is created automatically.
    2. Afterwards user found that device E1 is wrongly created under device category D1, it should be created under device category D2.
    So, what is the convenient process to do that. Shall I delete the equipment E1 through standard process then again create E! under device category D2 or any other way.
    I am not also sure how to delete the equipment E1 so that I can use the same number again.
    If there is any other convenient way, please share, else E1 number will be lost for ever if user mistakes at the time of creation.
    Regards
    Satadal

    hi,
    as you would know that each combination of material and serial number is unigue in the system.
    so if you create a device 'e1' in category 'd1' then you can also again create 'e1' in category 'd2'.
    to your second question about deleting the device i guess you can try it from the database.i.e deleting the entry but this may lead to inconsistent data.
    other way can be to either chnage the device category or the serial number.
    For this go to trans. IQ02(change mode) ,goto tab 'edit>special serial number functions>change material number/change serial number'.
    using this you can change device 'e1' from category 'd1' to category 'd2'.
    note: after this 'e1' from category 'd1' is deleted..
    i tried this before doing the installation ,so I have no idea whether it would work after installation of the device ,just try it out
    hope this helps.
    cheers,
    Rakesh...

  • If the device category is wrong and need to change it to the right one. How to correct it ?

    Hello experts ;
    I have a question in relation with Meter Asset Management : 
    If the device category is wrong and need to change it to the right one. How to correct it ?
    Many thanks !

    Hi,
    Dont know much about IS-U, but there is a different forum for IS- utility, you can post your query there to get quick response.
    SAP for Utilities
    Regards,
    sitanshu

  • MIDI (Musical Instrument Digital Interface) device

    Hi,
    I’m working for ColorKeys Music Training Company in
    Toronto Canada. ( www.colorkeys.com)
    We are beginning to develop an interactive music course using
    “Adobe Director”. We need students to be able to play
    music into this program through MIDI (Musical Instrument Digital
    Interface) device, such as a usb music keyboard.
    Are there any resources to teach us how to do this?
    If there is a person available for hire to either program or
    to train one of our technician in midi programming it would be
    greatly appreciated.
    Thank you!
    Eran

    go to the director exchange pages and search for 'midi', or
    click the link below...
    http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=midi&search_exchange=7&search_ category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&startn um=1&event=search&sticky=true&sort=0&Submit=

  • EG01 - incorrect type of measurement for device category

    Dear All,
    A device category has been created with the incorrect 'type of measurement' as '0 using transaction EG01'.
    This 'type of measurement' takes billing factor as zero resulting in wrong bills.
    Same is grayed out on transaction EG02.
    More than a 1000 meters have been created under device category. A few have already been installed.
    Can you please suggest how to change the 'type of measurment' to '3'.
    Thanks & Regards
    Malini

    Hi
    I guess you have created only for basic device category "Meter". Basic device category meter has direct measurment type property.Thats correct.
    If you are converting to type of measurment from 0 TO 3 .then it should basically a transformer.
    Thats the reson system not allowing.
    Try with Combination basic device category "meter/transformer"...it will come change mode..
    Thanks & Regards
    Konakanchi

  • Device category not saving - bug?

    I have noticed at least one occurrence where I have tried to change a device category from 'unknown' to 'telephony' and it will not save through sessions.  It initially updates and shows correctly, but if I logout and back in then it goes back to unknown.

    Hello
    Welcome to the Community
    This has been an ongoing issue for Blackberry phones OS5 and below. Please check the link below and I hope it gives you the resolution you need.
    Unable to edit or create new contacts on the BlackBerry Address Book
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes.  There is no 'Devices" category on the bar at the left

    I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes.  There is no 'Devices" category on the bar at the left

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

    while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

    I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
    Can you give an evidence that material 5 exists? e.g. screenshot from  SE16 at table MARA, MARC and MAST

  • While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

    While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

    Neha,
    you can do in two ways.
    1. Enter a valid Division which you configured in the system.
    2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
    Linganna Katigiri

  • Intel Management Engine Interface, Device status: This device cannot start (Code 10).

    hi Tec,
    Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
    Issue: my computer auto restart after 2 hours please resolved the issue
    Logs captured from System summary:
    [Problem Devices]
    Device  PNP Device ID   Error Code         
    Intel(R) Management Engine Interface
    PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.               
    Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled. 

    Hi Jeenny,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
    You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Is the "Device Class Definition for Physical Interface Devices" specification implemented in Windows?

    Can I assume that Windows will be able to handle my physical interface device if I follow the "Device Class Definition for Physical Interface Devices" specification while writing the firmware?
    I'm trying to develop a device which handles rumble output from applications such as games. Applications would include e.g. racing games or simulators. I'm hesitant to just clone Xbox 360 Gamepad or Sidewinder USB reports. I'd like to correctly declare my
    device as something on its own while still making use of already implemented OS-specific drivers. The purpose of the mentioned specification is exactly that as far as I can tell. I wasn't able to find concrete information about its level of support though.
    The "USB device class drivers included in Windows" page (sorry I'm not allowed to post links yet..) seems to link to WinUSB which I'm not sure what to do with.

    Thanks for your response. Well if everything was implemented at that time and it's still available it should be fine since the specification document's last version is dated 1999. I was just hoping there would be any form of documentation whether it's
    supported and by which degree so I don't go through the trouble of figuring out how the firmware should be written according to the specification just to find out there is no OS driver implementation for it which would render my work more or less useless.
    So I suppose I'm forced to go the trial and error path?

  • "Type of Device" in Device Category

    Hi,
    I could find "Only Device Info records Permitted; Multiple Ser. No. poss." as one of the options in the field "Type of Device" of
    the Device category.
    This means that system would allows us created only Device info Record for this device Category but same serial number can be used more than once.
    I like to know, in which cases, this option would be useful ?
    Regards,
    Sathyadeep

    Here is the answer,
    This option is used by the retailer, when devices of different distributors are used. So, there are chances for,  devices of  same category from different distributors,  having same serial number.
    But unfortunately, system allows to create same serial number device info records with same service provider  more than once. There is no check.
    Regards,
    Sathyadeep

  • I can't open or receive hotmail emails on my macbrook pro, but it works on other devices. i changed my password, emptied the cache, tried using a different browser, etc. i think i have a virus. help!

    I can't open or receive hotmail emails on my macbrook pro, but i can on other devices. i changed my password, emptied the cache, tried using a different browser, etc. i think i have a virus. help!

    Thanks for your help. that's not working either! ugh!!
    I can open hotmail, but it's not formatting right, i can't open emails, nor send them.
    Thank you so much for trying to help. I really appreciate it.
    I understand that you can't get a virus by opening an email, but it seems way too circumstancial! This is my third mac -- because unlike PC -- I never had a problem. I understand this problem is not with my macbook, because every other website works fine -- it's hotmail!

  • Device category error

    while creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

    Hi Ahemad,
    It seems you have not created the Material in MM with the same name of the Device Category you are trying to create. Create material using T.Code MM01.
    Hope it helps.
    Thanks,
    Rakesh

  • Raw device owners change after reboot the server

    The raw device owner change after reboot the server. i have to adjust it manually like
    chown oracle:oinstall /dev/raw/raw*
    any idea to make it permanent after bouncing the Server?
    MY OS is RHEL4 & Rdbms 10.2.0.1

    I got my answer .
    New to Linex. Need suggestions...
    How i can create new file ? like i want to create file oracle.permission
    should i use this command
    touch <filename> or any other command?
    second i want to put these entries raw device 3, 6,7,10,11 etc
    shoud it work ? like in the oracle.permission directory?
    # ASM
    raw/raw[3671011]:oracle:dba:0660

Maybe you are looking for