Outbound mta only
I setup one outbound mta only and I connected it to our ldap server. For some reasons, I don't want email send thru this mta server to accept local email. I want it to follow mx record rule. How can I do that? I don't really want to made this server as a standalone server.
ok i'll just tell you the situation..
one domain configured on system. there are 10 users on the domain. all users are using this outbound mta. this domain mx record is pointing somewhere else because of anti-spam service. so all mails send to the domain suppose to go to the anti-service server first then forward the email to incoming server of the JES system.
but since all 10 users are using an mta which is part of the system, every time a users send email to another user on the same domain it takes the email as local email because it is.
my problem is the email is not going thru the anti spam server compare other emails send by a server not part of the system.
that is why I'm asking can I configure the mta to force the server follow the mx record rules or not have a "local.ugldaphost" entry.
My only option I can think of is to build this mta server as standalone server which I'm trying to avoid.
Similar Messages
-
485 Ambiguous - Outbound Calls Only
I'm having some issues with the 485 Ambigous Error, but on Outbound calls only. I've read several blog posts and was able to solve this issue for incoming calls, but have yet to find a solution for outbound calls.
I have two phone numbers: XXX-XXX-5232 and XXX-XXX-3081. All of my users are configured in Lync with +1XXXXXX5232;ext=XXXXX
XXX-XXX-5232 is set to normalize to +1XXXXXX5232;ext=53999 which is a Lync User that is setup with Team Call to ring multiple other extensions. I'm not aware of any AutoAttendant or Response group that is configured with just +1XXXXXX5232.
Again, inbound calling is working just fine and outbound calls work as expected, they just report the 485 Ambiguous for each call.
Thanks in advance for any help you can provide.Yes, the call is routed to the Gateway. In fact, the call completes successfully. Here is the trace. Hopefully it will be readable:
12:17:03.513 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288602 ) ---- Incoming SIP Message from 10.188.0.18:61275 to SIPInterface #0 ---- [Time: 11:17:03]
12:17:03.543 : 10.188.0.19 : NOTICE : INVITE sip:[email protected];user=phone SIP/2.0
FROM: "VRRL - Kitchen"<sip:+1XXXXXX5232;[email protected];user=phone>;epid=621B6C2CF5;tag=aeb33cd2cc
TO: <sip:[email protected];user=phone>
CSEQ: 32959 INVITE
CALL-ID: 14fe8790-50ef-476a-80ac-e57061c0a2af
MAX-FORWARDS: 70
VIA: SIP/2.0/TLS 10.188.0.18:61275;branch=z9hG4bK7f7f1664
CONTACT: <sip:VRRL-SBA.cdol.int:5067;transport=Tls;ms-opaque=86db4f0fd1133b15>
CONTENT-LENGTH: 552
SUPPORTED: 100rel
USER-AGENT: RTCC/4.0.0.0 MediationServer
CONTENT-TYPE: application/sdp
ALLOW: ACK
Allow: CANCEL,BYE,INVITE,PRACK,UPDATE
v=0
o=- 885 1 IN IP4 10.188.0.18
s=session
c=IN IP4 10.188.0.18
b=CT:1000
t=0 0
m=audio 53854 RTP/AVP 97 101 13 0 8
c=IN IP4 10.188.0.18
a=tcap:1 RTP/SAVP
a=pcfg:1 t=1
a=rtcp:53855
a=label:Audio
a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:ssoH69QQto9/wyQyDEbtGezAe4zuH4ulyHNtUfRT|2^31|1:1
a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:Eas2Y5diRZ5HKgxFHpLLTdr8EWMmERj6ZGLjf8LO|2^31
a=sendrecv
a=rtpmap:97 RED/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=rtpmap:13 CN/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=ptime:20
[Time: 11:17:03]
12:17:03.573 : 10.188.0.19 : NOTICE : ( sip_stack)(2288604 ) new AcSIPCallAPI created - #276 [Time: 11:17:03]
12:17:03.593 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288605 ) | | new GetNewSIPCall created - #517 [Time: 11:17:03]
12:17:03.603 : 10.188.0.19 : NOTICE : ( lgr_stk_mngr)(2288606 ) Resource StackSession <#276> Allocated [Time: 11:17:03]
12:17:03.613 : 10.188.0.19 : NOTICE : ( sip_stack)(2288607 ) TlsTransportObject#57::CheckForConnectionPersistent - Opening persistent connection with proxy: 10.188.0.18:61275 [Time: 11:17:03]
12:17:03.613 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288608 ) | |(SIPTU#517)INVITE State:Idle() [Time: 11:17:03]
12:17:03.623 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288609 ) DNSResolver::HandleARecordQuery - Host:VRRL-SBA.cdol.int resolved in external table [Time: 11:17:03]
12:17:03.633 : 10.188.0.19 : NOTICE : ( sip_stack)(2288610 ) (SIPTU#517) HandleResolutionSuccessEV: Domain name VRRL-SBA.cdol.int was successfully resolved to IP: 10.188.0.18 [Time: 11:17:03]
12:17:03.643 : 10.188.0.19 : NOTICE : ( sip_stack)(2288611 ) SIPCall(#517) changes state from Idle to Invited [Time: 11:17:03]
12:17:03.653 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288612 ) | | | #276:SIP_DNS_RESOLVED_EV(14fe8790-50ef-476a-80ac-e57061c0a2af)
[Time: 11:17:03]
12:17:03.663 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288613 ) | | | #276:SIP_SETUP_EV(14fe8790-50ef-476a-80ac-e57061c0a2af)
[Time: 11:17:03]
12:17:03.673 : 10.188.0.19 : NOTICE : ( lgr_call)(2288614 ) (#276) Call Allocated. [Time: 11:17:03]
12:17:03.673 : 10.188.0.19 : NOTICE : ( lgr_stk_ses)(2288615 ) SIPStackSession::HandleStackSetupEV - NEWCALL: SrcPN=0 [Time: 11:17:03]
12:17:03.683 : 10.188.0.19 : NOTICE : ( lgr_stk_ses)(2288616 ) <SESSION #276> SendToCall - event: NEW_CALL_EV m_Call#276 [Time: 11:17:03]
12:17:03.693 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288617 ) | | #276:NEW_CALL_EV:(14fe8790-50ef-476a-80ac-e57061c0a2af) [Time: 11:17:03]
12:17:03.703 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288618 ) | | #276:Call changing states from:IdleState to:NewCallState_IP2Tel [Time:
11:17:03]
12:17:03.713 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288619 ) ServicesMngr::GetEndPoint PhoneNum = 402XXX0899
[Time: 11:17:03]
12:17:03.713 : 10.188.0.19 : NOTICE : ( lgr_psbrdif)(2288620 ) GetTrunkGroupId- TrunkGroup:1 found DstNum:402XXX0899 DstPfx:* SrcNum:+1XXXXXX5232 SrcPfx:* SrcIp:abc0012 SrcIpPfx:10.188.0.18 [Time: 11:17:03]
12:17:03.723 : 10.188.0.19 : NOTICE : ( lgr_psbrdif)(2288621 ) QueryOnHookPortStatus (ChannelNum=0), status = 1 Polarity = 0 [Time: 11:17:03]
12:17:03.733 : 10.188.0.19 : NOTICE : ( lgr_psbrdif)(2288622 ) Current trunks status: [Time: 11:17:03]
12:17:03.743 : 10.188.0.19 : NOTICE : ( lgr_num)(2288623 ) PhoneNumber::RemovePrefix - Number change from +1XXXXXX5232 to 1XXXXXX5232 [Time: 11:17:03]
12:17:03.753 : 10.188.0.19 : NOTICE : ( lgr_call)(2288624 ) Call::SetCoderListForCall #276 Found 2 Common Coders For Call [Time: 11:17:03]
12:17:03.763 : 10.188.0.19 : NOTICE : ( lgr_call)(2288625 ) <Call #276> Coder g711Ulaw64k20 : 20 [Time: 11:17:03]
12:17:03.763 : 10.188.0.19 : NOTICE : ( lgr_call)(2288626 ) <Call #276> Coder g711Alaw64k20 : 20 [Time: 11:17:03]
12:17:03.773 : 10.188.0.19 : NOTICE : ( lgr_profiling)(2288627 ) <Call 276> Profiled<Tel=0,Ip=0>: JBMinDel=10 JBOptF=10 EEarlyM=1 FaxTM=1 IPDS=46 IsFaxU=2 PI2IP=-1 SigIPDF=40 CNGMode=0 DTMFUsed=0 NSEMode=0 PlayRBTone2IP=1
RBUdpPort=0 RTPRD=0 SCE=0 VxxTT=2 Dst2Rdrt=0 DTMFVol=20 ECE=1 ECurDis=0 EDigDel=0 ERevP=0 FHPer=700 InG=32 MWIA=0 MWID=0 VVol=32 ReorderTime=255 DIDWink=0 2StageDial=0 DiscOnBusyT=1 DiscOnBrok=1 DPInd=255 AGC=0 NLP=0 [Time: 11:17:03]
12:17:03.783 : 10.188.0.19 : NOTICE : ( lgr_call)(2288628 ) | | #276GetNextUI:GlobalUI=442334516, mACAddrLsb=3257879 [Time: 11:17:03]
12:17:03.793 : 10.188.0.19 : NOTICE : ( lgr_call)(2288629 ) | | #276GetNextUI:GlobalUI=442334517 [Time: 11:17:03]
12:17:03.803 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288630 ) | #0:NEW_CALL_EV : (14fe8790-50ef-476a-80ac-e57061c0a2af) [Time: 11:17:03]
12:17:03.813 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288631 ) EndPoint::MediaResourceList::AllocateMediaIpPortsByMediaRealmID Perform NEW allocation of Media ports for RealmIndex(0) port(6220) current allocations
are:(1) [Time: 11:17:03]
12:17:03.813 : 10.188.0.19 : NOTICE : ( sip_stack)(2288632 ) SIPSDPSession#276 - Changing state from SIP_MEDIA_IDLE to SIP_MEDIA_OFFERED [Time: 11:17:03]
12:17:03.823 : 10.188.0.19 : NOTICE : ( sip_stack)(2288633 ) <BaseSIP SDPSESSION #276> UpdateChosenMediaByCN - CN as Remote 1 [Time: 11:17:03]
12:17:03.833 : 10.188.0.19 : NOTICE : ( sip_stack)(2288634 ) <BaseSIP SDPSESSION #276> UpdateChosenMediaByCN - Force silence suppression on chosen coder, because remote & local support CN [Time: 11:17:03]
12:17:03.843 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288635 ) | |(SIPTU#517)TRYING_REQ State:Invited(14fe8790-50ef-476a-80ac-e57061c0a2af) [Time: 11:17:03]
12:17:03.853 : 10.188.0.19 : NOTICE : ( sip_stack)(2288636 ) New SIPMessage created - #58 [Time: 11:17:03]
12:17:03.863 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288637 ) ---- Outgoing SIP Message to 10.188.0.18:61275 from SIPInterface #0 ---- [Time: 11:17:03]
12:17:03.873 : 10.188.0.19 : NOTICE : SIP/2.0 100 Trying
Via: SIP/2.0/TLS 10.188.0.18:61275;branch=z9hG4bK7f7f1664
From: "VRRL - Kitchen"<sip:+1XXXXXX5232;[email protected];user=phone>;epid=621B6C2CF5;tag=aeb33cd2cc
To: <sip:[email protected];user=phone>;tag=1c274616087
Call-ID: 14fe8790-50ef-476a-80ac-e57061c0a2af
CSeq: 32959 INVITE
Supported: em,timer,replaces,path,early-session,resource-priority
Allow: REGISTER,OPTIONS,INVITE,ACK,CANCEL,BYE,NOTIFY,PRACK,REFER,INFO,SUBSCRIBE,UPDATE
Server: Audiocodes-Sip-Gateway-Mediant 1000 - MSBG/v.6.20A.045.006
Content-Length: 0
[Time: 11:17:03]
12:17:03.883 : 10.188.0.19 : NOTICE : ( sip_stack)(2288639 ) Resource SIPMessage deleted - #58 [Time: 11:17:03]
12:17:03.883 : 10.188.0.19 : NOTICE : ( lgr_stk_ses)(2288640 ) SIPStackSession::HandleStackSetupEV - SETUP: SrcPN=0 [Time: 11:17:03]
12:17:03.893 : 10.188.0.19 : NOTICE : ( lgr_stk_ses)(2288641 ) <SESSION #276> SendToCall - event: SETUP_EV m_Call#276 [Time: 11:17:03]
12:17:03.903 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288642 ) | | #276:SETUP (TO:402XXX0899, FROM:+1XXXXXX5232):(14fe8790-50ef-476a-80ac-e57061c0a2af)
[Time: 11:17:03]
12:17:03.913 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288643 ) | | #276:Call changing states from:NewCallState_IP2Tel to:InitiatedState_IP2Tel
[Time: 11:17:03]
12:17:03.923 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288644 ) | #0:SETUP_EV : (14fe8790-50ef-476a-80ac-e57061c0a2af) [Time: 11:17:03]
12:17:03.933 : 10.188.0.19 : NOTICE : ( lgr_psbrdif)(2288645 ) UpdateChannelParams, Channel 0
[Time: 11:17:03]
12:17:03.943 : 10.188.0.19 : NOTICE : ( lgr_psbrdif)(2288646 ) #0:PSOSBoardInterface::ConfigureFaxModemChannelParams FAXTransportType=3 Modem configuration VxxTransportType=2 not allowed, forced to 3
[Time: 11:17:03]
12:17:03.953 : 10.188.0.19 : NOTICE : ( lgr_psbrdif)(2288647 ) #0:ConfigFaxModemChannelParams NSEMode=0, CNGDetMode=0, FAXTranType=3, VxxTranType=3, VoiceVol= 0, DTMFVol=-11, InGain=0, RTPRedDepth=0, ECE=1, SCE=3, ECNlpMode=0,
DJBufMinDelay=10, DJBufOptFac=10, Result=1) [Time: 11:17:03]
12:17:03.963 : 10.188.0.19 : NOTICE : ( lgr_psbrdif)(2288648 ) Turn ringer ON for channel 0 [Time: 11:17:03]
12:17:03.973 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288649 ) | #0:FXO Seize Line [Time: 11:17:03]
12:17:03.973 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288650 ) | #0:ALERT_EV (send) : (14fe8790-50ef-476a-80ac-e57061c0a2af) [Time: 11:17:03]
12:17:03.983 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288651 ) | | #276:ALERT_EV:(14fe8790-50ef-476a-80ac-e57061c0a2af) [Time: 11:17:03]
12:17:03.993 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288652 ) | | #276:Call changing states from:InitiatedState_IP2Tel to:AlertingState_IP2Tel
[Time: 11:17:03]
12:17:04.003 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288653 ) | | | #276:ALERT_EV(14fe8790-50ef-476a-80ac-e57061c0a2af)
[Time: 11:17:03]
12:17:04.013 : 10.188.0.19 : NOTICE : ( sip_stack)(2288654 ) New SIPMessage created - #93 [Time: 11:17:03]
12:17:04.013 : 10.188.0.19 : NOTICE : ( sip_stack)(2288655 ) SIPSDPSession#276 - Changing state from SIP_MEDIA_OFFERED to SIP_MEDIA_COMPLETED [Time: 11:17:03]
12:17:04.023 : 10.188.0.19 : NOTICE : ( lgr_stk_ses)(2288656 ) DtmfCapNegotiationAlgorithm :: TxDtmfMethod = DTMF_RFC2833_SUPPORTED [Time: 11:17:03]
12:17:04.033 : 10.188.0.19 : NOTICE : ( lgr_stk_ses)(2288657 ) DtmfCapNegotiationAlgorithm :: TxRtpRfc2833Payload = 101 [Time: 11:17:03]
12:17:04.043 : 10.188.0.19 : NOTICE : ( lgr_stk_ses)(2288658 ) <SESSION #276> SendToCall - event: DTMF_CONTROL_EV m_Call#276 [Time: 11:17:03]
12:17:04.053 : 10.188.0.19 : NOTICE : ( lgr_flow)(2288659 ) | | #276:DTMF_CONTROL_EV:(14fe8790-50ef-476a-80ac-e57061c0a2af) [Time:
11:17:03]
12:17:04.063 : 10.188.0.19 : NOTICE : SIP/2.0 183 Session Progress
Via: SIP/2.0/TLS 10.188.0.18:61275;branch=z9hG4bK7f7f1664
From: "VRRL - Kitchen"<sip:+1XXXXXX5232;[email protected];user=phone>;epid=621B6C2CF5;tag=aeb33cd2cc
To: <sip:[email protected];user=phone>;tag=1c274616087
Call-ID: 14fe8790-50ef-476a-80ac-e57061c0a2af
CSeq: 32959 INVITE
Contact: <sip:[email protected]:5067;transport=tls>
Supported: em,timer,replaces,path,early-session,resource-priority
Allow: REGISTER,OPTIONS,INVITE,ACK,CANCEL,BYE,NOTIFY,PRACK,REFER,INFO,SUBSCRIBE,UPDATE
Require: 100rel
RSeq: 1
Server: Audiocodes-Sip-Gateway-Mediant 1000 - MSBG/v.6.20A.045.006
Content-Type: application/sdp
Content-Length: 254
v=0 -
Is there any specific docs for using iPlanet v5.1 as MTA only rather than as a MTA/IMAP server?
We currently use PMDF on a couple of dedicated boxes as MTA's for our site. Licensing for iPlanet v5 is a little more favorable and a number of the former PMDF developers now work for iPlanet/Sun and these folks were great to work with. I'm reading the admin guide right now but am curious if there is more out there? Or if anyone is doing what I'm looking at doing?
alThere aren't any documents for installing the MTA portion of IMS only. In fact, out of the box, you can't install just the MTA in IMS 5.1. It may be possible in IMS 5.2.
Currently, you have to install the MTA and the store (which you can later disable). Then you have to configure your mapping and dirsync and so on for the MTA.
MTA configuration isn't drastically different in IMS (though I'm not familiar with SIMS or PMDF previous to IMS) so you will probably feel very comfortable with it after a read through the Admin Guide and the Reference Guide.
If you have a specific question about something in the process, someone could probably provide a little more detail. -
Billing of outbound Delivery only after Goods Issue
Hello Experts,
I am stuck in one of the requirements and require assistance from all the experts out there.
I want to automate the creation of the billing document after POST GOODS ISSUE.
I appreciate your fast reply.Hi,
This is a normal practice in business. VF04 is used and and a batch job is created which runs on specific date/time and creates Invoices for deliveries which are PGI'd already.
You can also set a batch job with a particular variant to run in background, and this will meet your clients needs.
SAPBILLDL is the program behind VF04. This program will first list down all the deliveries meeting the Variant conditions, and which are PGI'd and are ready to bill. Invoices will be created in the background.
Regards,
Vivek -
Hello,
I'm developing a deployment plan using Messaging Server 6.2. I'm seeking some advice on the configuration of the MTA machines.
An analysis of our future traffic volume indicates that we need 2 inbound MTAs and 2 outbound MTAs.
What are the pros and cons for the following two options:
a) 2 servers dedicated as inbound and 2 dedicated as outbound
b) 4 servers as inbound and outbound.
For high-availability considerations, it seems that if you lost a single server in option a, you would lose 50% of the capacity on either the inbound or outbound direction. But if you lost a single server in option b, you would only lose 25% of the capacity but in both the in and out directions.
Are there other considerations that would influence the choice between a or b, such as difficulty (or impossibility) of configuring and administering?
Has anyone actually implemented option b and what is their opinion of the procedure?
Regards,Yes, thank you for your comments and I agree.
My question stems from the nature of our expected
mail traffic. In addition to the typical in/out
messages from users, we have a large mail list that
absolutely, positively must be sent out within a few
minutes.Most of the time, the limitation on outbound performance is not cpu, but is network bandwidth and disk i/o.
If your list is ldap-hosted, I would break it into several pieces. Use the "mailhost" attribute for each group to let Messaging Server know which MTA to "expand" the list. You can certainly use "inbound" relays to expand and send out your mailing lists, even if they're mostly set up to do inbound work that way, and you don't have to worry about load balancing, as you've done that already.
>
The dilemma is how to have sufficient reserve
outbound capacity to handle the infrequent but
important mail list runs, but yet not have machines
sitting idle in between.Understood. See above. . .
>
My idea was to configure each machine with two
instances of Messaging Server 6.2 on a Solaris 10Bad Idea
First, >1 instance of messaging 6.x isn't possible for any single instance of an OS, second, it doesn't buy you anything.
Proper tuning of one instance is all you really need.
platform, one instance for the inbound MTA and one
for the outbound. I hoped this would allow each MTA
to have its own .cnf files thereby maintaining
independent configuration of inbound and outbound. Really no need for this. and since going to the pkg format, that prevents more than one instance from being installed anyway.
>
Further, I hoped I could assign the outbound MTA
instance to have a higher CPU priority than the
inbound instance. The idea being to get the highest
utilization of the CPU.Nope. Not needed. Don't go there......
Instead, check out Chad Stewart's tuning guide for a start on tuning your MTA's. The basic design of the MTA lends itself to quite a bit of adaptation to the load, based on your settings. If you typically have a lot of inbound load, and suddently hit it with 50,000 outbound messages, the MTA will shift resources to dequeue outbound.
http://ims.balius.com/downloads.php#tuning_guide
>
Does anyone see a problem in this approach?very much so. see above.
>
This might also require separate network interfaces
and IP addresses for each MTA instance, but that
seems more of a financial obstacle rather than
technical.You can certainly do this, but it may not be needed.
>
Would Solaris 10 zones be useful for keeping the two
instances distinct?hard to dynamically move resources around.
>
Thanks to everyone for their helpful commentsHere's what I would do:
1. Set up two boxes for "mostly" inbound. Do your scanning, vacation/autoreply and such. have your MX records point here.
2. Set up two boxes for "mostly" outbound. Use a DNS round-robin internally, for your users to send to.
3. Set up your lists as ldap lists. Make a "master list" that is simply a list of lists. Each sub-list should have a "mailhost" on one of the MTA's, so the two "mostly outbound" hosts transfer the message BEFORE address expansion to the correct box. That's one message, trivial expense of resources.
Messaging Server understands "urgent" flags, so you can tune the mta's to give such high priority.
test -
Prevent Outbound delivery creation in sales orders with delivery block
Hi gurus
We are facing the following issue:
Some sales orders have delivery block header and once they are saved an outbound delivery document is created; we want SAP system creates outbound deliveries only in those cases were sales orders have not a delivery block in header, is there any option or configuration we can use in order to prevent the creation of these documents?
Regards,
Edgar.Well Edgar,
let's see then in spro
Logistics Execution->Shipping->Deliveries->Define Reasons for Blocking in Shipping
Check out the configuration of your delivery block reason and pay special attention to this instruction:
"In sales documents, you can either enter delivery blocks manually at header level (business data in the sales document header) or they can be proposed automatically by the system. In the latter case, the delivery block must be entered in the respective sales document type (see chapter
"Define sales document types"). In addition, the delivery block in the sales document header is only effective if the delivery block has been assigned to the respective delivery type."
It must be something in the configuration of the delivery block reason you're using.
Regards,
Edgar -
Trigger GP process by giving process URL in Interface View outbound plug
Hi,
My Requirement is,
I have 1 GP process implemented in webdynpro.
From 1 of my view I am calling the process completeion(executionContext.processingComplete();) code, written in interface controller.
After this code I need to start the same process once again, without clicking any link.
For this I have created 1 outbound plug in the interface view of my window(out blug for WebDynproCOInterfaceView with parameter "Url").
Then after calling executionContext.processingComplete();, I gave
wdThis.wdGetWebDynproCOInterfaceViewController().wdFirePlugGotoUrl("Process Instantiation URL"); in my view.
but it is giving error,"WDRuntimeException: Cannot navigate from view WebDynproCOInterfaceView via non-existent outbound "
Also I tried to start the gp process througn coding also
what I tried is,
IWDClientUser wdUser = WDClientUser.getCurrentUser();
IUser user1 = wdUser.getSAPUser();
IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(user1);
IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate("EB0B28E08B6011DB0145EB416E0",userContext);
EB0B28E08B6011DB0145EB416E0 is the process ID.
This code I have tried by giving before and after the completion of the previous process(process9executionContext.processingComplete();)
But this also didn't work..No error came. But process didn't start again after thecompleted once.
Please help me out.
Thanks
smithaHi Rupam,
thanks for the reply
I have given EXIT type of outbound plug only. But it won't work if the view is in portal.
When I tried to create the process using GP API the process is creating in Background. For me , after the completion of one process , automatically next should trigger and the corresponding view should be visible for the user.
Process is triggering using GP API but, the view is not visible to user.
Please help me
Thanks
Smitha -
Can we create inbound delivery with refernce to outbound delivery?
Dear all,
can we create inbound delivery with refernce to outbound delivery?
Regards
ahmadDear Ahamed
I beleive it is a stock movement between 2 different plants
If so then the receiving plant will have to do GR against the outbound delivery only
The outbound delivery of the supplying plant
The outbound delivery of the supplying plant will not become the inbound delivery of the receiving plant in SAP
But logically yes
Your second post talks about outbound delivery only and that is correct
My point is your proces doesnot involve inbound delivery at all
In STO there is no inbound delivery at all
Inbound delivery in SAP means shipping notification that means the confirmation from the vendor about the despatches
That will not have muck material details and it is just a confirmation
Meaning of inbound delivery from SCM 601 logistics execution
The goods receipt process using inbound deliveries realistically maps standard
processes in many companies. If the vendor announces the goods receipt with a
shipping notification, the inbound delivery can be created either manually or
automatically on the basis of the shipping notification. It contains information
transmitted by the vendor concerning the expected delivery times and quantities,
as well as any information about packaging. It is also the reference document for
the subsequent putaway using a transfer order. If you also use the transportation
function as part of Logistics Execution, you can summarize inbound deliveries
into inbound shipments.
Regards
Raja -
IDOC HRMD_A06 Missing Infotype When Outbound
Hi All,
I'm using message type HRMD_A and basic type A06 for my HR outbound IDOC interface.
I did not put any filter for the distribution model, however, when I execute the outbound, it only outbound the IT 2 and IT50 for me. Other infotypes are missing (eg IT 1, 8, 9 etc).
Can you tell me what did I setup wrong? Hope someone can help me because it's urgent.
Many thanks in advance.Hi,
Hard to say... Are you using PFAL for distribution? Have you check the application log (SLG1 - Object HRALE)?
Have you tried to debug RHALEINI (PFAL)? Are you using an evaluation path to get your population? What transfer mode are you using? (insert? update?) Did it actually works once or you just never make it works?
Kr,
Manu. -
Saving Drafts on IMAP account that's forced to use SMTP outbound server
Hi!
Occasionally, I'll get messages from OSX Mail telling me that it can't save a copy of a draft on an IMAP address, and when I send said message, it never shows up in my sent items folder.
Due to limitations with my ISP, I cannot use the IMAP outbound server (they block 25, and my IMAP's outbound port only operates on 25.). Instead, I use an SMTP server that I have for another account.
Any thoughts as to why A.) It's not saving in the sent folder, B.) I cannot save drafts, and C.) This only happens occasionally?
-JonathanJonathan,
Typically, the choice of SMTP used as Outgoing Server, does not have to match the account of the From address, and the SMTP provided by your ISP would not prevent Mail from saving the message from the IMAP account in the proper Sent mailbox. However, with IMAP accounts, it is normal and necessary to choose a folder on the IMAP server, and tell Mail to use that folder for the Sent message (via the aforementioned "Use This Mailbox For" command), if the selection in Mail Preferences/Accounts/Mailbox Behaviors is to save the Sent messages on the Server. Without this choice, Mail should create a Sent mailbox that will reside on your Mac's hard drive. There is a similar choice for the Drafts.
In the Sidebar to the Mail window, does your Inbox for the IMAP account have any small black triangle beside it, or at the bottom of the Sidebar, are there any folders you have not created, or perhaps an Icon in the form of a sphere with "@" in its center?
More info, please, and see:
http://docs.info.apple.com/article.html?path=Mail/2.0/en/ml1134.html
and
http://docs.info.apple.com/article.html?path=Mail/2.0/en/ml800.html
Ernie -
Hi
I am trying to achieve a functionality wherein i want to RESEND and not reprocess my Outbound Idoc ( only if the Out IDOC is in status 03 or 12 ) .
the aim is to copy the existing IDOC verbatim ( without allowing the user to modify any fields ) , generate a new number and resend it .
This is same functionality as in we19 with the difference being for modification of fields in the newly generated IDOC and the other problem is i am not authorised to do a we19 in production environment.
Hence i need to replicate the we19 functionality inside we05.
so the user shud be able to run transaction similiar to we05 , see all idocs as per message type , select any IDOC he wants (with status 03 or 12 ), press the " resend " button which we will add in the code and then a copy is made and send to the receiver system .
Can someone help me with a FM which does the resending functionality as described above?.
Regards
BhavanaUsing RSEOUT00 seems like a good method.
http://www.it-maverick.com/index.php/contracting/edi-skills/71-resend-an-multiple-sap-idocs-via-edi -
Hi guys.
I'am looking for a tiny MTA only to forward my user mails to my real mailbox.
Perhaps there is a smarter solution than using a MTA daemon. A script using msmtp/ssmtp or so...
Thanks in advance
Andreas
Last edited by echasslau (2010-08-30 21:52:09)echasslau wrote:I've never had mails in my mbox file. But outputs of crons should be there...
man crond
You can send the output anywhere you want (-m), you can use a script (-M) so I guess you could just append it to the end of a file?
Last edited by vacant (2010-08-31 07:51:02) -
Create Outbound extended IDOC for venodr create & change (XK01 & XK02)
Dear all,
My requirement is as below:
I have to populate an extended IDOC of the standard IDOC CREMAS in the following cases.
1. When a new vendor is created from XK01 with classification characterstics value for supplier status as 'YES'.
2. When a vendor is changed by adding a partner function OA in the partner function.
3. We have to purposefully fail the IDOC when the partner function OA is deleted in XK02 transaction.
4. We have to purposefully fail the IDOC when the main vendor is blocked or deleted(XK05 or XK06).
Since i am new to IDOC, i tried many things but its not working.
I tried by the change pointer method for the standard IDOC but it will create the IDOC in all cases which we don't want it should be created only when supplier status is 'YES' and new partner function OA is created.
Regards,
Manjunathhi,
I know how to extend an IDOC, but my question is after extending an IDOC i have to populate that outbound IDOC only in some cases.that is when a vendor is created with supplier status as YES, when a vendor is changed by adding an partner function.
I want these checks know where to make these checks before creating an outbound IDOC.i want to knaow a common point where i can make these checks like an exit.
i found 1 exit fo all the cases EXIT_SAPMF02K_001 but in this exit we will have the vendor number because it is exit before save.
Now i am looking into the FM 'MASTERIDOC_CREATE_CREMAS' in which we have an exit 'EXIT_SAPLKD01_001'.
Regards,
Manju -
Delivery relevant only for TD shipment.
Hello,
In an IS-OIL system, how to make the outbound delivery only relevant for TD shipment. i.e user should not be able to process it with VT01N transaction.
Is this possible in IS-OIL system. If yes, please let me know the IMG settings required for this.
<b>Useful answers will be rewarded with points.</b>
Regards,
Stefan.Hi,
Stefan,
You can check to create TD shipment through transaction
O4F1...(Create a Shipment )
O4H1(Create/Change Delivery Confirmation)
O4G1*(Create a Loading Confirmation is not used for STO)
However I am sure about the settings of this.
I wish I could help you more.
I will try to fetch some information.
Hope it helps.
Thanks and Regards
Rohit. -
STO, MD04 - visibility of outbound delivery at receiving plant MRP
STO raised:
MD04[Supplying plant] - STO appearing
MD04 [Receiving Plant] - STO appearing
Outbound delivery created
MD04[Supplying plant] - Outbound Delivery appearing
MD04 [Receiving Plant] - STO appearing
Goods issued
MD04[Supplying plant] - None
MD04 [Receiving Plant] - STO appearing
How do Receiving plant know goods has been issued from supplying plant?? as MRP doesn't give any indication at receiving plant
automatic Inbound delivery against outbound is only solution?
Experts please help here
ThanlsHi,
In the MD04 screen when the outbound delivery has been PGI'd at the shipping plant the receiving plant will have an additional column showing up which holds the quantity that has been shipped.
Maybe you are looking for
-
Msi x79 xpower II . Bios permanently corrupted
Hi i have a really bad situation on my mobo BIOS A and B corrupted. Can boot just from "multi bios button" Bios present V2.7 Used the "MSI Forum HQ USB flashing tool" with package you posted (150) but still no success. I also tried the M-flash method
-
Error CERT_CHAIN_INCOMPLETE CERT_CHAIN_UNTRUSTED
Hi, I am getting the following error on the weblogic(8.1 Sp2) server while using two-way ssl. I have used java keytool to generate the private keys and self signed certificates for the server and the client: #<13-Sep-2004 12:27:16 o'clock BST> <Debug
-
Saving Messages to removable media
A user has messages that they would like to transfer to CD or USB Memory stick or some other form of removable media. I understand that the messages are wave files, but how do I get access to them so that I can copy over for them!?
-
Planned quantity and actual quantity error
Dear all, Planned quantity and actual quantity both are same,but still some variance showing in plan/actual variance column. Kindly find below image.Material 10000135,10000137,10000310. while confirming we dint consider these material,apart from that
-
Summarized accounting document
hi all i have a query. i created a sales order with 10 line items. i created the delivery and billing. when i saw the accounting entery it is creating 10 line items for each product. tax is comming for total 10 items in only one line item. my require