OutBound Status in Message Processing

Hi,
I am trying to call a BAPI and pass the data to BAPI and getting the response from the BAPi. I am capturing the response from BAPI. Once I capture the message I am trying to transform the message . This transformation step is always showing as " In Process" continuously. After some time this status is getting changed to "Message has error status on outbound". And also overall status message is showing as 'CLOCK ICON'(WAIT).
Please help me, if you have any idea.
Thanks & Regards
Katta Mohan Reddy

Hi Katta,
The mapping will work fine individually. But due to the data which cannot be parsed, it will throw exception at runtime and that happens in transformation step. You can check the t-code SXMB_MONI_BPE and see the details in graphical view showing transformation step with a red mark in the full flow. If you choose for list with details you can see the error in mapping.
Thanks & regards,
Jayakrishnan

Similar Messages

Outbound status to delete XML messages in PI

Hi,
we are using a deletion process in PI wiith the pg RSXMB_DELETE_MESSAGES but the XML messages with a outbound status = 1 cannot be deleted. It seems that the pg SXMS_REFRESH_ADAPTER_STATUS permits to change the status to 6 but does not work for me.
So, I need guidance. For information, we condigured the deletion period (10 days).
Thank you

Hi Pascal,
You should try to manually confirm the messages (in SXMB_MONI - Cancel Processing of messages with Error CTRL F8) and then run all the deletion jobs again.
Please see Note 872388 and 820149 for details. Following is the relevant portion from 872388:
"Check if there are asynchronous messages in error status.
Asynchronous messages in error status are neither deleted nor archived.
This behaviour is different to erroneous synchronous messages which get
deleted after their retention period (see step 5) has expired).
Asynchronous erronous messages, however, must be cancelled and then be
archived. You can either use transaction SXMB_MONI, search for erronous
messages and manually cancel them. Or you can use the report provided by
SAP: RSXMB_CANCEL_MESSAGES. Should you decide (for non-productive
systems only) that you would like to delete these manually cancelled
messages, please use note 820149."
Regards
joel

Process code for 869(EDI ) Order Status Inquiry Message type.

Hi Gurus,
Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
Thanks,
Sudhakar

Hi Everybody.
There's no standard process code for LOIPRO Outbound Idocs.
This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
BD64.
Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
You can choose.
Regards.
Albert.

SXMB_MONI: Outbound Status Red (Need Err Message Alerts)

What is the best way to setup meaasge alerts in XI for a red flag in SXMB_MONI in the "Outbound Status" field? We currently have error messageing setup in ALERTCATDEF that will send an error message when the "Status" field is a red flag but I don't know if there is a way to point it to the "Outbound Status" also. We use the following short text in ALERTCATDEF for notification:
System: &SXMS_ERRSRC_SYSNAME&
POS XI Message ID:    &SXMS_MSG_GUID&
POS XI Error Category:    &SXMS_ERROR_CAT&
POS XI Error Code:    &SXMS_ERROR_CODE&
I am thinking tha ALERTCATDEF will only send an alert when the "Status" field is red flag, and may not be possible to point to the "Outbound Status" field".
     Any suggestions?    Thank-You.

Bill,
2 questions here,
1. Are alerts also triggered for outbound errors?
Am not very sure but if i remember correct ,in one of our scenarios when there was an error in SM58 while posting the Idoc ( error on outbound side in MONI ) no alert was triggered. I dont have any access to a server where alerts are working and so would just like to confirm if alerts are triggered also for Outbound side errors or are they triggered only for inbound errors?
2. If they are triggered for both, then wouldnt selectin NO RESTRICTION in where did the error occur suffice?
Regards
Bhavesh
Message was edited by:
        Bhavesh Kantilal

CcBPM: Message outbound status, Message being sent

Hi
I have a message with status flag message being sent at the outbound status PE since 30 days. Because of this message many messages got blocked with scheduled on outbound side status.
I tried to delete work items related to the message in SWWL, but i am not able delete.
Please suggest solution
Regards
Subba Rao

Hi velidi subba rao,
Please go to SMQ2 and right click on the entry and Select Save to LUW. It saves it to SMQ3. You will be able to reprocess it from there.
Give it a try and let me know if it worked. Also just release the queues once you have saved the message that is stuck.
Regards,
Jannus Botha

Outbound status locked?

Today we sent thousands of idocs from sap systems to non sap systems, and from non sap to sap.
A strange thing happens: a lot of idocs that go from sap no non sap system, has the status "message being sent" on the outbound status (in the sxi_monitor TC), and the other idocs doesnt have this problem. They seems to be stacked in BPM, and they are passing very very slow (half an hour per 10 idocs).
How can I change this or what should I do? Because its all stacked here un Prod.
And when I refresh the cache, it appears some errors on idocs and I cant resend them because they dont appear in the TC SWPR and in the Runtime Workbench gives me the next error:
"Unable to schedule 1 of 1 messages for processing; update the status"
So I cant resend them, or maybe they were sent but I cant see that in here.
Well, if someone can help me I'll be very very happy
Thanks!!!

Hi Claudio,
>
> A strange thing happens: a lot of idocs that go from sap no non sap system, has the status "message being sent"
>
Message being sent means the messages are processing through queue and you can check these messages in queues SMQ1 and SMQ2 also execute the queue in error if any and monitor the queue if it is processing very slow you require tuning.
>
So I cant resend them, or maybe they were sent but I cant see that in here.
>
For this you can check in SXMB_MONITOR --> Advance Selection Criteria --> Out Bound Status with various options.
May be you can find some messages there.
Also Check in SWEQBROWSER , Check the box other events and radio button all events.
If you dont find any messages there then in moni tcode click on PE and check the BPM steps.
Thanks!

XI- CRM through IDOC adapter - error in outbound status of XI

I have set of messages created today, each of which have 10,000 records as well as same no. of idocs as outbound in XI.
only few messages have status 'messages processed' adn lot of messages are in staus 'Message Recorded (Commit follows)' and 'System Error (Restart Possible)'.
So only the expected idocs are not coming in CRM. But i see the idocs XI. i clicked on IDOC in outbound column of SXMB_MONI.
how can i restart the same message and get the idocs into CRM.
THanks for your help in advance.
Regards,
Jilan Bhasha

hi Agasthuri Doss,
Do you mean to Restart the message?
i tried restarting the message, then prompted with the below message.
Do you want to retain the trace level for the
selected messages (with errors) for the restart
or increase it (maximum level)?
i click on Retain, then the below error appears.
'You cannot restart XML message
E79C4320576611DBBAB10003BAD9E360 with this
status/type'.
Thanks & Regards,
Jilan Bhasha

Idoc Outbound Status Error

Hello everybody,
I have an interface that sends and Idoc to an R/3 system and I have it on Status "Processed" but in Outbound Status "System Error" with red flag in SXMB_MONI in PI, but I can't see no dumps neither in PI or R/3, so message in queues I turned on the trace in ST01 and I can't the RFC call that PI should do to R/3 to send the Idoc, I think is about roles and security oft he communication user that exists in R/3, but I'm not sure what roles it should have to allow the Idoc to go thru, any suggestions?, thanks in advance.
Regards,
Oscar

You dont' have enough permission. SAPALL try with..
check this one SAP Note Number: 460089
Edited by: Anand on Dec 4, 2008 7:03 PM

BPE outbound status

Hi,
in transaction SXI_MONITOR for same BPE process the column Outbound Status has the status "Message being Sent", but the BPE process was completed and all messages were processed and delivered.
Because this status ( Message being Sent ) in BPE process?
tks.

HI
All BPM use the PE that can be the reason for the status. Moreover use SXMB_MONI_BPE to monitor BPM's
Thanks
Gaurav

Outbound idoc error message

Dear all,
When i am manually create a direct request for POS outbound, the system shows the error message as below. It cannot generate an outbound idoc. Do anyone know how to detect this error and how to solve this problem?
Error message:
Processing Status
Recipient: XX01
IDocs created
     None
     Trigger file for status ID: 00000000260056
     does not have to be created       No messages needed
Thanks and regards
Chris

Dear all,
i have solved the problem. thanks you for your attention.
Chris

How to Run Operating System Command Before/After Message Processing SAP PI

Hi,
We are trying to execute multiple commands via "Operating System Command Before/After Message Processing".
When we use single command say for example cp or mv (copy or move) the commands get executed fine.
eg: cp %F /var/opt/data/outbound/Test/Dummy.txt
/this works fine/
when we club commands together or try to redirect the outputs of commands, none of the commands get executed.
eg:
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
or
wc -l %F > /var/opt/data/outbound/Test/Dummy.txt
Is it possible to execute multiple commands or redirect the output of commands without using a shell script? The PI server we are working on iis hosted on UNIX environment.

Hi Harleen,
try like this
cp %F /var/opt/data/outbound/Test/Dummy.txt ; rm %F
instead of semicolon try this
(1) &
command1 & command2
Execute Command1 and then execute Command2
(2) &&
command1 && command2
Runs the command2 only when command1 doesn't Complete successfully
(3) ||
command1 || command2
Runs the second command if the first command had an error
(4) ()
(command1 || command2) || (command3 & command4)
Defines the order in which commands are to be executed
Regards
Suraj

Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

Scheduled Status in Message Monitoring

Hi All,
We have a scenario from DB- DB using Java Proxies. The Message interfaces are defined as Asynchornously with EO mode.
Usually the sender channel picks data and tirggers Java Proxy. Proxy process all records and send the status back to sender in 5 mins.
But when I started multiple interfaces at the same time, I observe that one interface is taking 15 min and while that interface is in processing state, the other interface which started at that time are also in Scheduled status. But the sender channel picks data for every 5 mins, which is creating duplicate records.
The interfaces which are in Scheduled status are getting processed only after that interface ( taking 15 min) gets processed.
Why is this dependency on other interfaces and is there any way to avoid this dependency?
Please suggest.
Regards,
Srini

you can do queue/message prioritization.
but I suggest to use one status field in DB, when you are polling DB to select records , immidiately change staus to picked and after processing successfully change it to processed.

To Be delivered status in Message monitoring

Hi,
There are some messages in TO BE DELIVERED status in Message monitoring while selecting integration server. I could neither cancel nor resend.
any input reg. this will be appreciated.
I didn't see any messages with TO BE delivered status in adapater engine.
I could able to clear What ever messages in system error status in adapter engine by filtering based on sequential id.
I have seen this thread & link also.
To Be Delivered
Re: "To be delivered" status in RWB -- Any solution?
http://help.sap.com/saphelp_nw04/helpdata/EN/49/e3fb40ef74f823e10000000a155106/content.htm
I could not see any entry in SMQ1, SMQ2, SM58 also
Thanks
Praba
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:02 PM
Edited by: Prabaharan Rangasamy on Dec 8, 2009 1:04 PM

Hi,
You cannot resend or cancell the messages which are in status "To Be Delivered". Check Receiver adapter File/Jdbc/ OFTP e.t.c. which is processing these messages.
Check with your Basis team to remove the lock of adapters if any. Or to process these messages you require soft restart of Java stack.
I had same kind of issue two days back with OFTP adapter messages and did soft restart of java stack with help of Basis team.
Hope it will helps you
Cheers
Veera

Error in service desk while message processing.

Dear Basis Guru,
I have tried to configure the standarad servie desk scenario in solution manager 7.0 EHP1 stack 22.
         The end users are able to raise the message ( both without sap gui and from sap gui )
         Messages are properly getting routed to support teams.
         Message processesor is able to process the mesage ( can reply , can change the status of message ) from sap gui    only .
But message processor is not able to process the message without sap gui ( thorough web link ).
Link - http://solprodhml.hmldm.com:8003/sap/bc/webdynpro/sap/ags_workcenter?sap-client=113
When mssage processor try to change status or propiry through web link following error occurs .
The URL http://solprodhml.hmldm.com:8003/sap/bc/webdynpro/sap/ags_incident_trans was not called due to an error.
Note
The following error text was processed in the system HSP : Could not find attribute ATTR_00000001
The error occurred on the application server SOLPRODHML_HSP_03 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE_INFO~GET_ATTRIBUTE of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: IF_WD_CONTEXT_ELEMENT~GET_ATTRIBUTE of program CL_WDR_CONTEXT_ELEMENT========CP
Method: UPDATE_BP_EVENT of program /1BCWDY/B33K1JXKX4WX14T8Y3RC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/B33K1JXKX4WX14T8Y3RC==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: FIRE_EVENT of program CL_WDR_COMPONENT==============CP
Method: IFWDR_INTERNAL_API~RAISE_EVENT of program SAPLWDR_RG_PROXY_FACTORY
Method: IF_COMPONENTCONTROLLER~FIRE_UPDATE_BP_DETAIL_EVT of program /1BCWDY/B33K1JXKX4WX14T8Y3RC==CP
Method: REFRESH_ONE_ORDER_OBJECT of program /1BCWDY/B33K1JXKX4WX14T8Y3RC==CP
Method: IF_COMPONENTCONTROLLER~REFRESH_ONE_ORDER_OBJECT of program /1BCWDY/B33K1JXKX4WX14T8Y3RC==CP
In system st22 shows following dump : -
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WD_CONTEXT
Client.............. 113
User................ "KPIT_PR2"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "2A02CFE040A5F108B31F18A905457F24"
Program............. "CL_WDR_CONTEXT_NODE_INFO======CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "192.168.0.145"
Caller Port........... 8003
Universal Resource Id. "/sap/bc/webdynpro/sap/ags_incident_trans"
Please help
Thanks,
Rusi123

Hi
Please find the reply in Bold :
What Sol Man release are you workin on?
SAP Solution Manager 4.0
What kind of characters get truncated?
General message characters (English alphabets)... is this because of length constraint?
Are you working on a unicode system?
Yes
Does this happen while creating messages from a satellite system or from within Sol Man?
When user creates messge in SAP ECC 6.0 , then the sme of the last characters of each row gets truncated.
Best regards
Sarang

OutBound Status in Message Processing

Similar Messages

Maybe you are looking for