Outlook 2013 become black after intalling Windows Thecnical Preview

Outlook 2013 become black after installing Windows Technical Preview.
Outlook appears fully or partly black, and color comes back to normal where you point the cursor.

Hi,
Please follow the suggestion above to ask a question in Windows Technical Preview or
Outlook Forum
for more suggestion.
Personal suggestion, since there is a new installation for Windows Technical Preview, please restart your Windows machine to have a try.
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

Outlook 2013 display black background in datenavigator plane

Since a few days we has an outlook 2013 issue in the datenavigator. Outlook display a black background. Has anyone an idea how we can resolve these issue? Until my account is verified I don't can insert an image...
Has anyone an idea how we can resolve these issue? We use Windows 7 Enterprise 64bit, and Office 2013 with the latest Patches. All User in this VDI Infrastructure are affected from this issue.

Hi,
Do you mean this pane below?
In Outlook 2013, the display issue sometimes may be caused by the following setting:
FILE -> Options -> Advanced -> Display -> Disable hardware graphics acceleration. Check it to disable the acceleration and see if this can fix the issue.
I also suggest you start Outlook in Safe Mode to determine whether it's caused by 3rd-party add-ins:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
If there is no problem in Safe Mode, please disable suspicious add-ins to verify which one caused the issue.
If the issue still exists, please make sure the video driver has been updated to the latest.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Windows 7 becoming corrupt after "Setup Windows and ConfigMgr" step

Hey all,
Redid my reference images and now I got an issue with several machines I tried doing bare metal OSD on.
The TS aborts somehow, it still thinks it's running, after Setup Windows and ConfigMgr. After that step it reboots and I'm greeted with a weird Win 7 logon screen where the font kinda looks like Windings (the font folder on the machine is almost empty, that's
why).
Looked at the ccmsetup log. This error is listed: http://social.technet.microsoft.com/Forums/en-US/ee4e31cd-d456-44f4-a980-6a785d393d84/ccmsetup-failed-with-error-code-0x80040154-in-ccmsetuplog?forum=configmanagerdeployment
The log also complains about BITS, too low version to be able to install ConfigMgr. But obviously Win 7 contains BITS v 4, so I don't get what happens.
None of the apps I install in the reference image build I'm able to start (IE 10, Office apps), Office is not even listed in Add/Remove Programs.
I have redone the reference images two times, once in plain MDT 2013 and once in SCCM.
The error is inconsistent. It happens most frequently on Dell Precision T1700 machines, but not always. Sometimes there's no error when installing the ConfigMgr client and I don't get any font issues, but I still can't start Office apps or IE 10. This is driving
me mad.
ccmsetup.log and smsts.log files are here if anyone wants to take a look: http://1drv.ms/1ETazJx
Please help!

You may have a similar issue we had. When we upgraded to R2, and updated our boot images from WinPE 4.0 to WinPE 5.0 we came across a bug with DISM. Our machines would get to the Setup Windows and ConfigMgr step and hang on a black screen/white cursor. After
working with Microsoft for a few weeks we found using a x64 boot image resolved our issue deploying Windows 7 x64.
Can you try recreating your x86 boot image and if that does not work try creating x64?
Daniel Ratliff | http://www.PotentEngineer.com
For me, using a x64 boot image solved the problem. Why I don't know. I created a new x64 MDT boot image and task sequence and tested all newly captured wims on several different models, with different settings, and I couldn't reproduce the problem.
Then I tested the old task sequence (basically only difference is that it uses x86 boot image) and the first deployment went fine. The next one gave me the ccmsetup/windings font error again.
Thanks for your help! I'm also very eager to hear what Microsoft came up with during your support ticket.

Outlook 2013 Navigation Pane Spacing in Windows 8.1

I have two laptops sitting side by side. One of them has a windows 8.1 installation with Office 2013 and the other has a windows 8 with installation of Office 2013.
There is one huge difference in Outlook that is a large source of frustration - the navigation pane.
In Windows 8 / Outlook 2013, I can see about 30 folders, each with a very small space in between each other.
In Windows 8.1, I can see about 15. Half the amount, and all in part due to an enormous space between each folder.
I understand the need to go "touch friendly" but, in doing so, don't limit all the other users - instead, give them a customization option to opt back and forth between touch friendly and workstation friendly.

Hi,
The number of the folders may be also related to the screen resolution of your computer.
In addition, please check if the Outlook 2013 on WIndows 8.1 is working with Touch Mode enabled. To check this, expand the Quick Access Toolbar menu and select Touch Mode. Now,
the Touch Mode button is added to the QAT which you can use to toggle Touch Mode off and on. See:
If you are using Touch Mode, try to switch to Mouse Mode to check the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

The screen goes black after restarting Windows

I downloaded the Support Software to a FAT-32 flash drive and partitioned the main hard drive inside my Late 2009 Macbook running Lion. The Windows starter worked fine and I installed Windows 7 Professional. The installation worked just fine and I was taken to a Windows desktop. I insterted the flash drive and ran the installer using the .exe. Everything looked just fine, I even watched as the support for my graphics chip was installed. I restarted the computer to make sure everything went all right and when I opened Windows from the boot menu, the screen goes blank. There is a little glow, but otherwise it's black.
I can't repair the Support Software because the OS won't boot. I can boot into OS X just fine, and I even tried twice to install Windows with the same result (and completely deleted the Windows partition). The only modified thing about my computer is an upgrade in memory. Any help would be appreciated!

Yes, it is suggested to keep it plugged in when installing it so It's not supposed to do that.
If you installed a new set of Ram, or extra, you might try to boot into the Hardware Test DVD and do the Ram check test for awhile and see if something comes up.
You might also try to reset your SMC which controls your power management before you try installing Windows again.
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

After intalling windows server 2008 R2 on database server, dstabase connections are very slow

Hi,
I upgraded my server from windows server 2003 to windows server 2008 R2. I have two application servers. Now applications on application servers are trying to execute queries but those are taking too long. It is very strange why it is happening.
Firewall rule is open for 1433 TCP and 1434 UDP.
Application servers are Windows Server 2003
Thanks in advance!
Thanks,
Sanjeev

Another possible cause is a problem with the application server. You might try a reboot of the problem app server to see of that changes performance.
If performance doesn't change after the reboot, try a coping a 100MB file from the database server to the application servers for performance comparison. Assuming the performance difference for the copy is roughly the same as the queries, that
will eliminate SQL Server for troubleshooting and allow you to focus on networking as the likely culprit. The fact that 10Mbps outperforms 100Mbps is concerning. Perhaps the OS upgrade resulted in different drivers or interface configuration, or maybe
there is something else going on external to the servers, such as incorrect routing.
I'm not a network guy but I would start by reviewing network interfaces on all servers to ensure they are configured properly and for full capabilities of the hardware and correct subnet and gateway. Also review all components if your network
topology for proper configuration.
For additional help with Windows networking, I suggest you start a new thread in the Windows Server Platform Networking TechNet forum (http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverPN).
Include the results of the file copy test and a link back to this thread.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Can I migrate a 16 GByte .pst file from Outlook 2013 to TB on a Windows 7 64-bit PC? Will my blocked junk senders work?

Worried about the large .pst file. I use IMAP and read there may be a 4 GByte limit if Local Folders are used but I do not understand what "Local Folders" means. I have a large (several hundred) blocked senders list and wonder if TB will import the whole list at one time or if I need to enter the blocked senders one by one.

@Merel, I find it amusing that people have hundreds of blocked senders. I have been using internet mail since late 1980s. I have been actively using some of my mail accounts since before the Millennium. I have no blocked senders.
I used to have blocked senders in MSN messenger and Yahoo messenger as it was the only SPAM control option available, but I have Zero blocked senders in my mail client. I certainly get loads of spam in my Yahoo account, it is something Yahoo appear to be incapable of managing. I get very very little in my other mail accounts, so other providers can mange it.
Thunderbird does an excellent job of managing my spam with only a few each day making it to my inbox.
You appear to think transferring this list from client to client is important. I would really like you to tell me why! Then I would love an explanation why you think syncing of such list has merit.
Most people with lots of blocked senders appear to think a blocklist is a SPAM management tool. It is not.
Either they are using blocked senders for SPAM control, something that is simply not appropriate as it is a slow process. To place each mail in a list and check it against 500 email addresses you don't like simply bogs down the receipt of mail.
Or they are and a particularly unlikable person that just

Problems logging on after installing Windows 10 Preview

I've been using Windows 7 and Office 2013 for some time and works well with our on premise Lync 2013 installation. over the weekend I upgraded my workstation to Windows 10 and have been reinstalling my apps and making notes of things that will need to be
looked at and I have a strange issue that Lync will not sign in at all.
I get the following in the Lync Logs, Windows 10 was a clean install not an upgrade. IP address etc all reconfigured the same and I can access the CSCP through the browser with out any problems.
Anyone got any ideas?
1 Login: FAIL (hr = 0x80ee001c)
Internal Server: Pool1.diti.lr.net:5061
External Server:
IsInternalAccessLocation: 1
   autoRetryByErrorCode=1
   withRescheduleHint=0
   withAutoRetrials=0
   Login failed with permanent error or no auto-retrials
1.1 Lync-autodiscovery: PASS
1.1.1 Get-NewWebTicket: PASS
1.1.1.1 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0D099E88 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]
1.1.1.2 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0E9B9F68,
context: WebRequest context@ :246078848
MethodType:4
ExecutionComplete? :0
Callback@ :1729887C
AsyncHResult:3d0000
TargetUri:https://pool1.diti.lr.net/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
1.1.1.3 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0E9B9F68,
context: WebRequest context@ :246078848
MethodType:4
ExecutionComplete? :1
Callback@ :1729887C
AsyncHResult:3d0000
TargetUri:https://pool1.diti.lr.net/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
.: Lister :.

Hi Mike,
It is not recommend using Lync 2013
on Windows 10 , there are still many problems need to be solved.
Also, we do not get any relevant information whether or not the Lync 2013 supports Windows 10.
And the known issue for your reference.
•There are several known issues with screen sharing with Lync.
From
http://blogs.windows.com/bloggingwindows/2014/11/12/new-build-available-to-the-windows-insider-program/
Best regards,
Eric

Osx wont boot after installing windows dev preview.

Hi. I recently added boot camp and windows 8 to my 2011 mbp 17". Ever since the install my computer wont boot osx unless i run disk utility and repair my mac partition. Then everything runs fine untill i go into windows again and then go back to osx. Thoughts?

mcwilliamsc wrote:
Do i need to make a clone or will my time machine backup work.
TimeMachine drives are not "hold the option key bootable" like a clone and with Lion there is only a "hold Command r" Recovery Partition on the same drive your trying to repair.
So to get a external source to boot Lion, you need to Carbon Copy Cloner Lion to a another new/blank Disk Utility HFS+ Journaled formatted drive. Disconnect your TimeMachine drive before doing anything and don't clone to it or everything will be erased, use another drive.
Once you have Lion cloned, hold option and boot from the Lion clone and test it out.
mcwilliamsc wrote:
I only have one external drive andni dont think a clone will fit.
Only clone to another drive with no data on it, don't clone to a partition, don't clone to a TimeMachine drive. Disconnect all other drives before cloning so you don't make a mistake.
mcwilliamsc wrote:
Also when you say c boot do you mean using a lion install disk as opposed to the install option when you boot into disk utility?
Your signature says you have 10.6.8, obviously there are no install disks for 10.7, however you can make some by "hold option" and clicking on Purchases in the MacAppStore and redownloading the Lion installer (but don't install)
Follow these directions to make multiple "hold c" bootable DVD copies of the Lion installer.
http://eggfreckles.net/notes/burning-a-lion-boot-disc/
Test the disks out, you can see it's just like the 10.6.8 installer disk with Disk Utility and everything.
With a Lion DVD one can install Lion AND the Lion Recvoery Partition on a new or totally erased drive, like we are about to do.
When you clone Lion, it only clones the Lion OS X partition, not the Lion Recovery Partition. So by totally erasing the entire disk and installing Lion from the DVD can the Lion Rececovery Partition and Lion OS X partition be restored and your GPT repaired and your firmware flushed.
So once you got a Lion clone disconnect it, then c boot from the DVD and erase your ENTIRE Lion internal drive, this means you have to select the drive makers name on the left, HFS+ journaled of course.
Once that is competed, install Lion fresh, this will create both the Lion OX partition and the Lion Recovery Partition.
When that is finished, don't bother booting into the fresh Lion install, simply option boot off the Lion clone and reverse clone onto the Lion OS X partition, this will place back Lion, all your programs and files just like before.
Then you should be back to normal, your GTP is fixed, EFI is fixed (reboot twice) and you have everything except the Windows bootcamp partition.

Partition couldn't be modified after uninstalling Windows consumer preview

I uninstalled Win Consumer Preview on my Macbook (Lion) using Bootcamp. An error showed up just as it got done. Since then, the Partition couldn't be modified because it contains CoreStorage physical volume. Help!

I uninstalled Win Consumer Preview on my Macbook (Lion) using Bootcamp. An error showed up just as it got done. Since then, the Partition couldn't be modified because it contains CoreStorage physical volume. Help!

GUI Bug Outlook 2013 while sorting E-Mail in the list view in the main window

Hello,
I found a bug in Outlook 2013 - following occures: in main window, when I sort the list view with e-mails by "sent to" or by "received from" and when I delete one mail from this list, the view is not correct, because after the deleted
E-Mail disapears when I go with my mouse Cursor over other e-mails in the list Outlook 2013 shows all mails from the top of the list (beginning in alphabetical or reverse alphabetical order) as I move with mouse over neighbour mails from the corrected view
instead of the same view with only that one item deleted. The scroll element right has the right Position, but after clicking on the arrow up or arrow down within this element it jumps to the start. This has worked in my Outlook 2010 well, and this is very
unpleasant because I can not work well everytime sorting my mails right again after I deleted one. This seems to be only the case if I sort my mails by Name, not if sorted by size or received/sent date, then list view works well. I use Windows 7 Ultimate x64
and Office 2013 x32, on HP6910 with ATI graphics Card. Whole System works fine since years. Is there any log file I can submit? Is my description clear? Please help , thanks.
regards
Bogusz Schubert
PIMPEX Bogusz Schubert
Vohwinkeler Str. 58
42329 Wuppertal
Tel +49 202 4299 2270
Fax +49 202 4299 2271

I made a screenshot of this: after deleting email from a Partner starting with letter "D" Outlook jumped back to the top of the list starting with "1" - you clearly see the wrong Position of the scroll element right and false broken view of the mails
at my mouse Cursor
Picture is under the Domain mt.i24.cc slash outlook2013guibug1.jpg
any help will be much appreciated

ICloud with Outlook 2013 64bit and Windows 8.1

Hello,
I have a problem setting up the sync with iCloud and Outlook 2013 64bit on my new Windows 8.1 Thinkpad.
On my old Wind 7 PC and the same software (Office 2013 64bit) I get it worked, but not on the new one.
Installing is everything fine but the it says "Die Konfiguration kann nicht fortgesetzt werden, da Outlook ohne Standardprofil eingerichtet wurde..." Translatet it means something like "Setup can not continue becuase outlook isnt configured to have a defualt profile".
I've searched nearly the whole internet but without a solution. Can anyon

Have you checked to see if you have a default profile designated for Outlook? You can set it as described at the bottom of this article: http://office.microsoft.com/en-us/outlook-help/turn-on-or-off-profile-prompt-HA1 02749211.aspx.

Lightroom 5 stops working after trying to email photos within LR and using Outlook 2013

I recently upgraded to Lightroom 5 and was tryinhg to email some photo via the Lightoom Send Email dialog. My default email is Outlook 2013 and I am using Windows 7 64bit. When the dialog is filled and send email is selected LR 5 says "Lightroom has stopped working". I think there may be an issue with the email.dll in LR5. I have seen where others not using Outlook 2013 seems to be having success. Looks like LR5 and Outlook 2013 not playing together nicely. Any help or getting this issue elevated to Adobe higher support appreciated.

I was able to send emails before.
OS - 8.1 (64Bit)
Office - 365 (64Bit)
Log Name:      Application
Source:        Application Error
Date:          17/11/2013 21:50:11
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
Faulting application name: lightroom.exe, version: 5.2.0.10, time stamp: 0x52288c50
Faulting module name: Email.dll, version: 5.2.0.10, time stamp: 0x52288a01
Exception code: 0xc0000005
Fault offset: 0x00000000000148af
Faulting process ID: 0x14d0
Faulting application start time: 0x01cee3ddfaab54ec
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.2\lightroom.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.2\Email.dll
Report ID: 3b05bf7a-4fd2-11e3-be8a-d43d7e4c6101
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-17T21:50:11.000000000Z" />
    <EventRecordID>14532</EventRecordID>
    <Channel>Application</Channel>
    <Computer>MasterXs</Computer>
    <Security />
</System>
<EventData>
    <Data>lightroom.exe</Data>
    <Data>5.2.0.10</Data>
    <Data>52288c50</Data>
    <Data>Email.dll</Data>
    <Data>5.2.0.10</Data>
    <Data>52288a01</Data>
    <Data>c0000005</Data>
    <Data>00000000000148af</Data>
    <Data>14d0</Data>
    <Data>01cee3ddfaab54ec</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.2\lightroom.exe</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.2\Email.dll</Data>
    <Data>3b05bf7a-4fd2-11e3-be8a-d43d7e4c6101</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>

G62 b05sd screen goes black after windows logo

Hello,
My laptop has been turning of at random lately and now the screen turns black after the windows logo appears, though the start-up tune can be heared. I've tried connecting it to different external monitors yet it doesn't work. I've been able to start-up in safe mode and tried updating BIOS using both HP support assistant as well as manually. HP sup. ass. also doesn't indicate updating anything. The battery is essantially dead, yet i've used the laptop for a long time using the adapter only.
My next step is to do a windows system recovery, but I want to see if the issue can be resolved differently.
Thnx

Hi @frankkilsdonk ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP G62-b05SD Notebook and issues with freezing on the Windows logo. It is trying to load something . I would look at what is in your startup file in Windows.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. If you installed new software on the Notebook you might want to uninstall it as this could be the issue as well.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Outlook 2013 become black after intalling Windows Thecnical Preview

Similar Messages

Maybe you are looking for