Output error in delivery

Hii
I creatd salesorder with 4 line items ,while doing delivery with reference to sales order only 1 line item is displaying in the output.Remaining 3 line items are not being displayed in the output.Kindly help me regarding this.
Regards,
Venkat.

Hi,
This is a Clear case of Delivery date Problem or Stock not available or availability check Problem.
Just go to the delivery schedule line items of the sales order and check for the expected delivery date and try to make a delivery in the date mentioned in the schedule line.
Means in the outbound delivery creation mention the delivery date(which is defaulted as current date) should have the delivery date of Sch Lines(VBEP- EDATU) in sales order in the field Selection date of the outbound delivery VL01N.
or else Try the same in VL10C. but the field CalcRuleDefltDlvCrDt should be blank.
Regards,
Pydi Reddy.

Similar Messages

Output error - partially picked status in delivery

Hi All,
im getting an error while taking output for the delivery.Scenario is like, i have created STO with about 600 line items(10 interval). created outbound delivery for the same. Two deliveries have been created one with 500 line items and other with 100 line items respectively. in the first delivery i have picked all the quantity(manually w/0 WM) and did the PGI. system shows the status as partially picked and when i tried to take the out put, it is giving error " No data exists for the delivery" and in the long text " Place holder for the batch input error text, this message is not output"
for the second delivery again i picked and did PGI, status shows fully picked and out put is getting generated.
im using std LD00 output type
In the output procedure i assigned the requirement '1' which is delvry GI posted which says system checks the goods movt status and if the status is fully picked and PGI is done output will be generated.
so i have created a new routine where in i gave goods movt status to accept partially picked or fully picked and PGI is done to give out put. even then it is not working.
i want the output for the partially picked deliveries too.
pls help in this issue as this is happening in production client.
Thanks and Regards
Maddy

Hi Maddy
Welcome to SDN forum
As you are using LD00 output type only , and for this output type as you have assigned requirement 1 , because of this only output is not coming . So firstly check wheather output is coming correctly or not by removing the requirement 1 .
Secondly , also check wheather any Smartforms are assigned to LD00 output type or not. If any Smartform is assigned then go to smartform and then check wheather any sub-routine has been written or not
Finally also check the access sequcne and the condition record you have maintained
Regards
Srinath

Error in Delivery Note -Smartform

Hi,
I'm working with Delivery note smartform. I have copied the standard form le_shp_delnote into zle_shp_delnote. When I execute it using VL02N transaction, I am getting the error as ' Output could not be issued'. The form is already configured with standard program 'RLE_DELNOTE' in NACE.Please help me to solve this.

Could you investigate what is written in the output error processing log. You can access the error log in the output issue edit page in VL02N transaction. Let me know what is written in the error log, so that I can be of some help to you.

External Hard Drive Input/Output error

I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

Thanks for the suggestion.
Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
text below posted to other question relating to external hard drive problem.
I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

I am in mavericks disk utility recovery mode as my mac book will not boot up & stays only on the grey apple screen. When I verify the disk I get open error5 :input /output error on Syst stuck on 1 minute pouring out over 50 error messages & still counting

I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
But this has been going on for over 10 mins .
I can not verify disk or repair disk .
I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
Does anyone know what is going on here ?
My system looks like it has been totally corrupted . Thanks Andrew

Could be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

Ssrs sharepoint 2013 error: "A delivery error has occurred ...not a sharepoint document library..."

Greetings SSRS/SharePoint experts,
SharePoint 2013 with SSRS - Creating a subscription to a report that is in SharePoint
I'm trying to create a subscription to publish a report to a sharepoint document library.
I've configured all the settings and on clicking OK get the following error:
"A delivery error has occurred. ---> Microsoft.ReportingSerives.Diagnostics.Utilities.DeliveryErrorException: A delivery error has occurred. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InvalidExtensionParameter: One of the extension
parameters is not valid for the following reason: The delivery path is either not a SharePoint Document Library Folder or does not exist in the Share Point farm."
SQL Server Developer Edition 2012 SP1
SharePoint 2013 Standard
Just wondering if anyone has a solution.
I've tried changing the proxy settings as per this post
http://social.technet.microsoft.com/Forums/en-US/19817dc7-6725-40d8-befa-1b94099a71bd/sql-server-2012-reporting-services-in-sharepoint-2013-integrated-mode-dilivery-extension
Workaround is to not use a sharepoint document library but write the report to a windows file share (this works but is not optimal).
Hoping someone at Microsoft or an expert will come back with something.
Kind regards
Gio

Hi,
Can you check the SharePoint ULS log located at : C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS, and look at the log there when the error occurs?
You can also check the Application Event Log on the SQL Server to see if there are any additional errors.
Tracy Cai
TechNet Community Support

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Disc image input/output error

When burning a disc image using disc utility, I get the ever so popular input/output error message. I cannot find anywhere on these posts a solution to this problem. It is not dirty discs, etc. It happens when I try to copy dvd's... which are not licensed, etc.

Could be so many things, Input/Output errors are generally loosing contact with a device for a variety of reasons, do you get any error # with that?
Open Console in Utilities & watch for more info whn you try to burn, or open the Disk Utility Log if there.

"input/output error' when making disc image from DVD

I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
This means I'm unable to copy the disc and then successfully install my Logic Studio.
Any ideas?

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

Input/output error when copying a DVD

I created A DVD some time ago using Roxio. It plays in DVD Player on my Mac Pro, but I can't create a .dmg using Disk Utility. I always get "Input/Output error". I got the same result on my wife's newer Apple. I tried to Restore it but can't, and Verification shows no problems that I can see. I am able to copy DVDs created on Final Cut Express just fine. Any suggestions to help me create copies of an old DVD I love?

I just figured out how to get around the problem. Download Burn and use it to burn the VIDEO_TS file to a new disk. It must be something that Apple adds to make it hard to copy DVDs made from non-Apple software.

Am getting PCM output error message when trying to play a video from iPad2 on my TV

The movie was purchased on iTunes store. I connected the iPad2 through the adapter via HDMI straight to the TV and I have a Bose Lifestyle system for surround 5.1 sound. After a few minutes and every few minutes after that the movie would blur and blackout then it would come back. Eventually I got a PCM OUTPUT error message onscreen. How do I resolve this problem?

I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.

Is it possible to get an output error when there is no error?

Ok so I did a picture slide show in flash CS5 where I used actionsript 3. I added a button so that when you click it will go to the next picture. Then on the last one it will go from the last picture and reset back to the first picture. I even added some music with a stop and play button so if you are playing some music and say you get tired of it while looking through the pictures you can click the play/ stop button and it will stop.
I got the following error in my output error-
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@64b30f99 to flash.display.SimpleButton.
at flash.display::MovieClip/nextFrame()
at johnexercise3_fla::MainTimeline/fl_ClickToGoToNextFrame_5()
This error occurs when I go to test movie about half way through my photo gallery this message will pop up. The thing about it is that despite the error all my images load and play correctly as they should and my sound plays and stops as I ask it too. I guess I could ignore the error seeing as how everything works 100% fine despite the error but I was just wondering if this error is something serious or if I should be concerned? If it is something to worry about then what can I do to fix it? Again as I said the error is there but the test movie shows everything perfectly fine.

Sorry. I may have mis-spoken. I have 2 image gallery projects. One of them has a button that you click to go from one picture to another along with a stop and play button for the music. Now my second project which is in seperate flash document is the same exact project except that instead of using a button to click from one picture to another I am clicking on the picture itself to get from one image to the next. My 2nd project is the one that had the error. And I also kept the stop and play music button on that one. I am not sure about anything else that would have caused this code error but it went away for now. For some reason it was giving me this error and I closed out of flash and restarted as it kept acting funny at school today and for some reason the error went away. I will keep what you and kglad said in case the error comes back just do that. Thanks again to the both of you.

I'm trying to backup a my harddrive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen

I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

External Hard Drive not Readable & Input/Output Error?

I was using my OWC 300gb external hard drive for a while and it's worked great. I had a bunch of files on it, but I recently transferred everything to another external HD I have, which worked fine, so I could erase this 300gb one. I can't remember what happened, but somehow my Macbook doesn't recognize this hard drive. I think erased everything and then unplugged it without ejecting it first. Anyways, nothing is on the the drive anymore and I get this error message:
"The disk you inserted was not readable by your computer"
This pops up when I restart my Macbook. When I try to use Disk Utility, it greys everything out on the partition and Disk Repair tabs. On the 'Erase' tab, it will allow me to select Erase, but then gives me the error:
"Input/Output error"
Does anyone know how to get my Macbook to see my drive (so I can start to partition it)? For some reason only Disk Utility acknowledges it's there, Finder won't.
Anyone have any tips of what it is or what I can try? I did try to use my OS discs booting up holding C, but that doesn't work either.

Hi there. Everyone is saying on these forums that the hard drive is failing...suck. I went and bought a new when I got input/output error and found that the new one showed the same input output error, making it impossible to partition the disk. Then the guy in the apple service center told me the new one was bad too, after having seen the code that came up related to my new scorpio 250 GB drive. Instead of sending it back, I took it out and installed the old one..however this time with a slihtly more of pressure on the tape holding down the hard drive cable between the hard drive and the circuit board. Amazingly, this time it didn't even show any hard drive at all! Then I understood what was wrong. It was exactly what was indicated an "input/output errror"! ..the cable was broken. I bought a new cable, well the Powerbookmedic sold it as new but it was an old working one that arrived. Immediately, after change of cable the old hard drive and now also the new 250 GB works perfectly! I remember that some interesting symptoms prior to all hard drive problems appeared, such as not being able to start up properly, strange blue screens, flipping question marks etc. I remember that shaking the comp occasionally worked to get it going. No wonder, shaking occasionally made it work and i believe the damaged cable maybe changed position and started conducting. The cable is very sensitive and probably should not be taped down so hard as the first service center guy at apple had done with mine when he fixed it the comp a few years ago. Polymers/plastics bent heavily become fragile/brittle with time and are specially sensitive under pressure/bent. Note that my old damaged cable still conducted and showed the hard drives but didn't work fully. I hope this will help someone, it took me 2 month to figure out..

External HD - Input/Output Error

I had external drive that was not mounting or appearing on Disk Utility. The drive was out of warranty so I went ahead and changed the casing.
1.The drive appears on Disk Utility but still does not mount. DU only shows the root and not the volume.
2.Connecting it via USB tells me the drive is 298GB and appears as Maxtor 5000DV v0.1.00.00 Media. I connect it via Firewire 400 and it DU shows it as 128GB Maxtor.
Any help on what's going on here? DU also won't let me First Aid, Erase, or anything else on it. After I try to Erase it,Partition it, or anything it gives me "Input/Output Error".
10.5.2
Maxtor External (Actually a Seagate inside)
G5
Thanks for any help!

Adding:
What is the point of "Restore" and how is it used exactly?
Thanks!

Output error in delivery

Similar Messages

Maybe you are looking for