Output file name format
Hi All,
How can i configure output file name to the desired format generated in target directory in communication channel configuration in conf scenario.
ex: i want to generate the file in the below format..
YYYYMMDD_<Receiver>.TXT
Thanks and Regards
Venkatesh
Hi,
This is the UDF u have to write in Mapping,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key =
DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Using this u will get the File name into target side,In this UDF add the Time stamp.
Check this link for more details.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
phani
Reward points if Helpful
Similar Messages
-
Hi ,
I need to change the concurrent output file name based on the parameters assigned.Please guide as to how this can be achieved??Hi,
I need to change the concurrent output file name based on the parameters assigned.
I am not sure whether output name based on parameter value is achievable, anyhow please refer the follow doc which might be helpful.
What to Set $APPCPNAM for the Report Output File Naming Convention Format (Doc ID 1050938.6)
Thanks &
Best Regards, -
Custom File Name Format in B2B Console
Hi,
Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
I have read the Oracle doc and only the following formats are mentioned:
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
You help is appreciated.
Thanks
Priyanka Gno. It has the format which helps B2B in identifying the agreement
-
How to get the Output File Name as One of the Field Value From Payload
Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
BopannaHi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup -
Rename file name & format using ftp sender
Hi all,
This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
client format is : SAP_Order.txt (Pervious file name).
We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
How can i achieve this requirement?
Can please suggests me solutions ASAP.
Best Regards,
satya,Hi,
if your requirement is to pick the existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
then its simple...
use two receivers instead of one , one for point to target and other for sender itself... (second receiver is for changing the file name format....)
Hope the above understanding is correct...if not provide more details of your requirement...
HTH
Rajesh -
File name format of rotated access log
Hi,
I'm using wls5.1sp9 on Solaris.
Is it possible to specify a different file name format of the rotated http access
logs?
Instead of getting files named access.log0001 and so on, I would prefer access.log.<date>
or some other custom format.
Best regards,
Torleif GaltelandHi,
Thanks for your response. But I have another query. The name of the file as per your reply is like UsageReport.xls correct? Now my query is, should it contain some date,account id/orgid etc associated for that usage. The reason for my query is that if MSP
downloads the usage for different orgs having same bill date then it would conflict with the different usage files.
Thanks And Regards,
Sumanta Saha -
After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.
Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN -
Run Applet On Server Using 8.3 File Name Format
Hello Everyone,
I am currently trying to produce an applet that will display content from a PLC (which hosts its own webpage).The PLC itself only allows files using the 8.3 file name format to be stored on it (eg. 123456789.123).
I have tried a few simple things, such as changing the ".class" file extension to ".cls". But this just produced an error in my internet browser (IE 8).
Any help and/or work-arounds would be greatly appreciated.
Thank you,
Vincent Wiebe849427 wrote:
..I did not think of that, ..That's why forums rock. Many minds are better than one. ;)
Thank you very much :)You're welcome. :-) -
Setting output file name in export transaction data package
Hi all,
I am running an "export transaction data" package in the data manager. I wanted to set the output file name so that it will be a constant value. I wrote the following in the package editor:
INFO(%FILE%,\ROOT\WEBFOLDERS\COLMOBIL\VEHICLES1\DATAMANGER\DATAFILES\vehicles_to_pca2.txt)
TASK(/CPMB/TD_FILE_TARGET,FULLFILENAME,%FILE%)
The system run the package and reported success but the file was not created. When i did the same with an existing file name, it was not updated.
When I run the same package with the following PROMPT command instead of the INFO command:
PROMPT(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
The system works fine.
Any ideas?
TIA
AvihayI am sad to report that apparently Adobe does not do a very good job with the PDF printer. I have just spent over an hour with support to get the answer we can not help you. I guess I will have to spend $50 for NovaPDF to handle my problem. It's a shame when a superior overall product like Acrobat is not able to keep up with the knockoffs on the small things.
-
Require output file name same as input file without extension
I am doing a POC where I require that my output file name should be same as input file name. The input is a XML and output is Flatfile. If I use %SourceFileName%,
i am getting the output with extension. How can I remove the extension? Do I need to write a custom pipeline component?I don't think Orchestration or custom Pipeline can help you on this as you are setting
%SourceFileName% Macros at your send Handler which comes after Pipeline Processing .
As you are converting xml file to Flat file I would suggest to use Macros as
%SourceFileName%.txt
%SourceFileName% Macro gives the file name along with extention. This won't work! -
when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?
Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.'' -
How to programmatically disable prompts for output file names in Acrobat X
My code to programmatically disable output file names (below) is not working on a Windows 7 64-bit machine using Acrobat Distiller X. It works perfectly on a Windows XP machine with Acrobat Distiller 8.
The latest API Reference I was able to find is dated June 2008. My logic follows this convention.
I have confirmed that the registry key is updated as specified below. I have also confirmed that I am able to write to the directory indicated.
Please provide any suggestions to resolve.
Thank You!
~Lori
'Create the Registry Key where Acrobat looks for a file name
CreateNewRegistryKey HKEY_CURRENT_USER, _
"Software\Adobe\Acrobat Distiller\PrinterJobControl"
'Put the output filename (FilePath) where Acrobat could find it
SetRegistryValue HKEY_CURRENT_USER, _
"Software\Adobe\Acrobat Distiller\PrinterJobControl", _
C:\Program Files (x86)\Microsoft Office\Office12\MSACCESS.EXE, _
T:\PDF Files\Current Week\NFS_Lori,Test.pdfI remember seeing that the problem is thunking. A little more specifically, because it's a 32-bit driver but a 64-bit executable, there's a 32-bit system spooler process which will always show up as the EXE name.
-
Can I print to AdobePDF with a pre-determined output file name?
I have a list of PDF files that I need to reduce in size. I have tried many combinations of Adobe's "Save As Reduced PDF", "Save As Optimized PDF", as well as several compression programs. The best results I've found have been to print the PDF via AdobePDF, using the standard quality settings.
This leads me to my problem. It's simple to batch the print process to print multiple files to AdobePDF, however each one requires the user to specify the output file name. Is there a way to interface with the AdobePDF tool in a way that the output file name is already determined? I.e. passed into the program as an argument? Any help would be greatly appreciated.
Thanks,
Dan
EDIT: Under the Adobe PDF Settings, the option for Adobe PDF OUtput Folder is set for Prompt for Adobe PDF filename. There is also an option to dump to Documents\*.pdf, which retains the original filename. Is there a way to specify a different directory, rather than Documents, while retaining the *.pdf argument? Again, thank you.You would probably get better results printing from Acrobat. The HTMLLoader rasterizes the image first. You could possibly add a JavaScript function inside the PDF that prints and call that from your AIR app.
See http://www.adobe.com/devnet/air/flex/quickstart/scripting_pdf.html for information on calling JS functions in a pdf file from AIR. -
Concurrent Requests output file (pdf format) send to email
Friends -
Does any one implemented this.
Submit Conurrent Requests once the requests is completed send the output file(PDF Format) as an attachement to email.
Please provide us steps.
Regards
VSHHi,
See this thread.
concurrent ouput to email
concurrent ouput to email
Regards,
Hussein -
Use job parameter as output file name "alias" ?
I have a Hyperion 9.3 job with a # of cycles. Is there a way to tell Hyperion to use the job parameter/filter as part of the file name? For example, if there is a filter called "division" and for one of the cycles that is set to "sales", is there a syntax like "{division}" I can use in the output file name so that it picks up the filter?
Unfortunately, I have never seen any kind of syntax that would allow this in Hyperion. The only way I know to do it would be using the java sdk, but that is not something that can be done on the fly...
Maybe you are looking for
-
Fonts NOT showing up in Illustrator but are in Fireworks (CS3)
Hi, I have the CS3 package and it works great. However, I have a load of fonts on my system that are not appearing in the fonts menu in Illustrator CS3. I checked if Fireworks CS3 was picking them up and it is...this is great, but why not in Illustra
-
Has anyone ever lost all the information in "notes"
There were several pages in my "notes" and they are gone. Does anyone know how to retrieve them
-
Can't send mail after mavericks upgrade
MacPro user (mid2010) I am using a third party email address and am currently with O2 Broadband. Since upgrading to Mavericks, I am unable to send emails using the Mail app. My outgoing mail server is: relay.o2broadband.co.uk And I'm using the defaul
-
Pop up 'help improve Adobe's products' blocking access to Photoshop.
Cannot get access into photoshop whether I click participate or not.
-
SimpleDateFormat.parse accepts invalid date string
SimpleDateFormat("dd/MM/yyyy").parse(...) accepts invalid input strings (e.g. "1.1.2gsd001") without raising an exception. Where I do a mistake? Example: import java.text.*; import java.util.*; public class Test { public static void main(String[] arg