File name format of rotated access log

Hi,
I'm using wls5.1sp9 on Solaris.
Is it possible to specify a different file name format of the rotated http access
logs?
Instead of getting files named access.log0001 and so on, I would prefer access.log.<date>
or some other custom format.
Best regards,
Torleif Galteland

Hi,
Thanks for your response. But I have another query. The name of the file as per your reply is like UsageReport.xls correct? Now my query is, should it contain some date,account id/orgid etc associated for that usage. The reason for my query is that if MSP
downloads the usage for different orgs having same bill date then it would conflict with the different usage files.
Thanks And Regards,
Sumanta Saha

Similar Messages

Custom File Name Format in B2B Console

Hi,
Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
I have read the Oracle doc and only the following formats are mentioned:
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
You help is appreciated.
Thanks
Priyanka G

no. It has the format which helps B2B in identifying the agreement

Rename file name & format using ftp sender

Hi all,
This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
client format is : SAP_Order.txt (Pervious file name).
We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
How can i achieve this requirement?
Can please suggests me solutions ASAP.
Best Regards,
satya,

Hi,
if your requirement is to pick the existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
then its simple...
use two receivers instead of one , one for point to target and other for sender itself... (second receiver is for changing the file name format....)
Hope the above understanding is correct...if not provide more details of your requirement...
HTH
Rajesh

IPhoto: After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file.

After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN

Run Applet On Server Using 8.3 File Name Format

Hello Everyone,
I am currently trying to produce an applet that will display content from a PLC (which hosts its own webpage).The PLC itself only allows files using the 8.3 file name format to be stored on it (eg. 123456789.123).
I have tried a few simple things, such as changing the ".class" file extension to ".cls". But this just produced an error in my internet browser (IE 8).
Any help and/or work-arounds would be greatly appreciated.
Thank you,
Vincent Wiebe

849427 wrote:
..I did not think of that, ..That's why forums rock. Many minds are better than one. ;)
Thank you very much :)You're welcome. :-)

Change Date Format in iplanet Access logs

Hi,
We are currently using iplanet web server. The default date format in the access logs is dd/mmm/yyyy:HH:MM:SS GMT. How can we change this format to yyyy/mm/dd:HH:MM:SS GMT.
Thanks in advance

Sorry, I don't know enough about web server to answer you.

Change Date Time format in Iplanet Access logs

Hi,
We are currently using iplanet web server. The default date format in the access logs is dd/mmm/yyyy:HH:MM:SS GMT. How can we change this format to yyyy/mm/dd:HH:MM:SS GMT.

You should not change this format. The default date format complies with the "common log format" which is readable by many log analysis tools.
That said, if you still want to change the date format, you can replace %SYSDATE% with %LOCALEDATE% in your flex-init line. LOCALEDATE will cause the WS to use the date format set by your OS.

Authenticated user name not written to access log file

Our users are authenticated with certificates to an LDAP directory server. The Access log file is using the Extended-2 format.
The name of the authenticated user is now written in the Access log.
10.4.57.44 - - [19/May/2004:14:07:21 -0400] "GET /somepage HTTP/1.1" 200 10382
Anybody know why?

I've got the same problem with Sun Java System Web Proxy Server 4.02 for Linux.
When I installed it, authenticated users were visible in the access log. Then I tryied to change format and since that moment, this information is disappeared.
Any news about this bug?
Thanx.
G.

Log4j file name formatting

I have certain logging requirements to meet, and log4j was chosen as the logging API of choice. I can do the appenders & loggers, and rolling files and all of that, however, we have requirements on how the files themselves should be named.
${user.home}/logging/process-name/ip-address/log.xml.{date}
I can do the ${user.name} and append the date to the end using DailyRollingFileAppender. However, i see that when creating a logging message, you have access to a lot of data, such as the process id (or thread id), the ip address and whatnot, however, I need that information for file naming. Is this possible?
Thank you
Diane

yaniv1977 wrote:
Hi
I hava some servers that use log4j to log in shared folder.
i want that every server will create his own log file with his host name.
I'm using log4j.xml to configure the appender and I want to use variable to create dynamic file name.
Could it passible?
And what happens to your distributed enterprise system when that shared folder is not available?

Output file name format

Hi All,
How can i configure output file name to the desired format generated in target directory in communication channel configuration in conf scenario.
ex: i want to generate the file in the below format..
YYYYMMDD_<Receiver>.TXT
Thanks and Regards
Venkatesh

Hi,
This is the UDF u have to write in Mapping,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key =
DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Using this u will get the File name into target side,In this UDF add the Time stamp.
Check this link for more details.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
phani
Reward points if Helpful

File Name Format

I have a coldfusion app that allows users to upload images.
The problem is that many of these users are not web savvy and
upload hte wrong types of images with terrible names. I have error
handling in place but would love to be able to disallow uploading
of certian types of files from within the cffile dialogue. Like
only allow jpegs.
More importantly I am looking for a good name formatting
function that will strip out all the bad characters and spaces and
truncate the name and make sure they end with the proper extention.
Is there something out there that could do this? Thanks.
Eric

You don't need to write any javascript.
CFinput takes care of all of this for you...
<CFINPUT type="file" name="FileValid"
validate="regular_expression"
message="Enter a valid image file or else."
pattern="[a-zA-Z0-9_:\\]+\.(jpg|png|gif|JPG|PNG|GIF)"
validateat="onblur,onsubmit"
>

Listening channel : File name format.

Hi All,
We have below use case.
1# We need to poll and read files from EDI_OUT folder using Generic-FTP.
2# The files in that folder will follow EDIOUT_TimeStamp.txt format.
3# But our FROM_TP name is "GREEK" and TO_TP name is "LATIN".
Then what configuration changes we need to make , So that the listening channel delivers these files to GREEK_To_LATIN agreement.
in simple words, Can we read files which does not contain FROM_TP as starting string in their file names.?
Thanks,
Sid.

Please refer -
http://www.oracle.com/technetwork/middleware/b2b-integrations/learnmore/b2btn030b2bbinarytransfer-1648763.pdf
The B2B identifies all the properties while transmission but gets HTTp 400 Error.It is connectivity issue and has nothing to do with the content of the file. Cross-check the connection details provided in the partner channel configuration.
Also if I try to download payload from B2B UI through Report->Business Message, it does not give the correct zip file. The payload is corrupted.It will be. Reports are not meant for displaying/downloading binary data.
I get the error for Document protocol identification error.Refer to the above document. You need to set two HTTP headers for receiving binary doc over AS2 -
DOCTYPE_NAME and DOCTYPE_REVISION
Regards,
Anuj

8.3 file name format

Hello
I need to execute a dos program from java application. I want to use the following sentence:
Runtime.getRuntime().exec("cmd.exe /c start " + mySentence);
My problem is I need path and file names in 8.3 format (by example Program Files -> Progra~1).
My question is: �How can I to obtain this short name for path and filename?
Many thanks for your help

If you really want the 8.3 path, you'll need to use JNI - take a look at the GetShortPathName() Win32 API call.
However, for what you are trying to do, I think all you need to do is put quotes around the path you are trying to execute - i.e.:
Runtime.getRuntime().exec("cmd.exe /c start \"" + mySentence + "\"");
<RANT>Why MS decided that it's OK to have spaces in a path/filename is just beyond me... it adds very little to the user experience and makes parsing the darned things almost impossible...</RANT> :-)
- K

Display file name and remove error from log output

This script is working great from the GUI but when I call it from a cmd file from a job scheduler it throws out errors. I also want to display from is location the file name and it's byte count(ForEach($File in $Files)) so I can tell if any of the
files being combined where actually empty. It wants to search the current location from the sever not just-Locations parm..
Error message in LOG file:
Get-ChildItem : Cannot find path 'F:\powershell\-SearchFor' because it does not
exist.
It's trying to find file install.cmd from where script starts and all the -Locations(which is only the search parm)
Function Search-Files{
Param([String[]]$Locations, $SearchFor, $AppendTo)
Begin
If(-Not (Test-Path $AppendTo)){New-Item $AppendTo -ItemType File -Force}
Process
ForEach($Location in $Locations)
$Files = Get-ChildItem -Path $Location -Filter $SearchFor -Recurse
ForEach($File in $Files)
Get-Content -Path $FIles.FullName | Out-File $AppendTo -Append
End{}
Search-Files -Locations "\\Server1\c$\Temp", "\\Server1\c$\Test1" -SearchFor "Install.cmd" -AppendTo "C:\Temp\Search.log"
Thanks.

I search multiple shares to find a common file name then create a single output file. I will be doing this search and file creation
for 5-10 different file names. If there is a better way .. certainly open for suggestions. It's working but having issue with
the cmd file for every file and folder I check. It puts this error out for each run of the process.
Error message in LOG file:
Get-ChildItem : Cannot find path 'F:\powershell\-SearchFor' because it does not exist.
Thanks.
I tried your code with little changes and saved in Temp folder.
My CMD file has the below code
PowerShell C:\Temp\Untitled1.ps1
It worked.
Regards Chen V [MCTS SharePoint 2010]

How to keep file name formatted?

I need to generate .xlsx file as reporting purpose without renamed for
example :- File names end with YYYYMMDD format for the day they are generated.
Is that possible I can set up that kind of job?

see
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

File name format of rotated access log

Similar Messages

Maybe you are looking for