Overly button issue

Having trouble creating rollover overlays on my menu driven project in button menu of FCP. I have a total of seven menu connections and only two worked? Is it something simple that I am overlooking?

If you mean rollover rollvers (via layered menus) it could be the player itself, they are not supported acrosss all players.
Layer menus are here Layered Menus
Did you assign navigation to the buttons (or are yyou only going back and foorth between two buttons?)

Similar Messages

Problem in using Step into and Step Over button in Test Stand user interface development.

hi,
I am developing operator interface in VC++
currently I am facing a problem, I have created Teststand UI button controls dynamically on the dialog, I have assigned the buttons for break, Resume, Break all, Resume all, Step into and step over.
Break, Besume, Break all , Resume all buttons are working fine, the Step into and step over buttons are enabling if I break the execution, but after breaking the execution when I click the Step into button I expect that the current step will be executed and, breaks at the next statement, but when I click the Step Into button It is behaving like resume button, I mean the executioin is going on till the end of the sequence file, it is not breaking at the next statement,
Is my Step into button working the way it is supposed to be?, it is the same case with my step over button alsoI am connecting the TSUI button control to the execution view mgr in the CTestExecDlg:nDisplayExecutionApplicationMgr(LPDISPATCH exec, ExecutionDisplayReasons reason)
message funciton , and nothing I am doing nothing else, this is my code statement how I am connecting the button to the execution view manager.
mExecutionTab.m_pControlPtrArray[0].mExecutionViewMgr->ConnectCommand(mExecutionTab.MiscControls.m_StepInto,CommandKind_StepInto,0,CommandConnection_NoOptions);
mExecutionTab.m_pControlPtrArray[0].mExecutionViewMgr->ConnectCommand(mExecutionTab.MiscControls.m_StepOver,CommandKind_StepOver,0,CommandConnection_NoOptions);
Am I missing anything wrong? Can anyone please help me out.

Al B,
I'm not the original author of this post, but I have encountered a similar problem. My C# application has implemented the following "debug" buttons that work just fine: Run All, Pause, Continue, Stop. But my Step Over button causes the Sequence to run to completion. When the user clicks on the StepOver button, only one line is executed:
this.axExecutionViewMgr.Execution.StepOver();
but it behaves like its calling
this.axExecutionViewMgr.ResumeExecution();
Can you offer any insight into this issue?

Exit button issue in Captivate 5

Hi,
This is regarding the exit button on the playback controls. I have been using Captivate from version 2. Recently, started using version 5. When I published my simulation, the exit button is not working as earlier. It is also not working from- web server(IIS, Apache), when opened as pop-up as well. In local too however not working. I tried in both IE 7 and Firefox latest version.
I have seen the response from Adobe on this issue on this forum. It was quite surprising; it did not talk about the solution at all;
What I am not sure about is -
1. Why the exit button was working earlier versions.. why is it not working in latest?
2. Why should when simple code like top.close(); works fine (when coded inside the Captivate)?
3. Why is Adobe not acknowledging the issue?
4. Why there is no working around provided in the forums for this issue?
Could anybody please help me understanding this problem? I am really frustrated.
Thanks.

Happy New to all as well!
You are absolutely correct! The moment reporting is activated, the EXIT no longer functions. Although in my case, we are not using the time/slider bar but custom navigation buttons with an exit button on the last slide (and at the top of each slide).
This whole EXIT button issue (not just Cp 5 but Cp 6 as well) is nearly bringing me to the point of tears! This is really ridiculous! I am in a tough position right now where my manager may be wondering if I am right person for this job because I cannot make a little EXIT button work in our lessons.
"Solutions" or excuses that I have received
- Just remove the EXIT button -- No, we use a standard corporate template which hundreds of employees are already familiar with. To remove the EXIT button and instruct the learner to just close the browser would be unacceptable and a rather inelegant way to exiting a lesson.
- It is a tough issue that isn't Captivate's fault
With all due respect to the awesome person who keeps stating that, I have a feeling that you have not used other rapid elearning tools. Building an EXIT button in all the other major elearning tools is easy and works every time.
The source of my personal difficulty is that every other course that was built by previous developers (not using Captivate), all open in a child window and all have a working EXIT button.
I believe the PRIMARY reason for this problem might be in the fact that... inexplicably... Captivate does not offer an option to start a lesson in a CHILD window (i.e. separate browser window). This is why no javascript in the world will allow the tab to close (e.g. EXIT button). Closing a tab or browser window via javascript only works when the same instance was previously opened by a script using the window.open method. In other words, you can only use the javascript method to close an instance that was spawned via javascript.
This should explain why lessons published in Lectora (et al) always have working EXIT buttons every time and in every browser (minor exception is Opera for unrelated reasons).
The second red box is just another one of my problems with Captivate 6 (not related to this topic).
Solution????
I've been racking my brain trying to modify Captivate's HTML/javascript in order to carry over the AICC (or SCORM - same process) variables into a child window.
Like another participant stated, you can't simply rename the original index.html to index2.html and create a redirection like this:
<script type="text/javascript">
window.open("index2.html","lesson","location=0,toolbar=0,status=0,resizable=1,width=975,he ight=600");</script>
<body>
Yes, I tried this as well... but unfortunately, it breaks the AICC to LMS connection. *BUT* I can promise one thing... using the above redirection, does guarantee that your EXIT button works every time! Pity the LMS connection breaks!
QUESTION?
Does anyone have advanced knowledge of javascript in order to code the INDEX.HTML to open the lesson in a child windows AND maintain a connection to the LMS?

Losing Mouse "hand" over buttons when publish for Web.

Hi,
I'm new to Flash. I'm publishing a web-site and I lose the "Hand" icon for the mouse over buttons after I publish and run the HTML=>Swf files from the Browser. When I "Test the movie" from flash I see the "Hand" over buttons just fine.
Is there a publish setting that I'm missing which allows the hand to remain?
Please help.
Thanks,
Jeff

Hi, Had to work yesterday.
At the moment I'm running/testing locally (which may be the problem) from a flash secure directory on my desktop. So no link sorry.
I think I need to look into setting up a test service with Yahoo or something. Any suggestions? I'm not really sure how to upload my completed website (.html and .swf files) to a service. That's a different topic/question. Any help along those lines is greatly appreciated.
Anyway, I'm using safari 5.1.7 on my IMac. and Safari 6.0.3 on my Mac Pro. and Firefox 21.0 (primarily) or Internel Explorer (rarely) on my "windows" laptop. The "Hand" works on all of these (files local to the respective computer) except the IMAC Safari 5.1.7 flash player 12.0 combination, which was my first test environment scenerio.
I'm planning to do two things.
1) Update my IMAC to Safari 6.0.
2) Set up a test area with a service provider. This in itself may resolve the issue for the Safari 5.1.7. At least I'll be testing in a "real world" environment.
So, thank you for your help with this. I think we can call it solved. If my testing on a true server shows the same results then I may shoot out another question. I think it is a nice goal to have our web site creations run on all platforms and browser comibations but is that realistic? If we test on as many combinations of the most recent software releases as we can with reasonable success what more can we do? I'd like to hear you opinion. Feel free to sent me an email.
Would you like me to open a new question/discussion regarding the help finding and uploading files to a service provider?
Thanks again,
Jeff

My wife's new iphone4 (a replacement for a 5 month-old iphone 4 with home button issues) is not recognized by itunes. Every other ios device in the house using that computer and Apple ID is. Any suggestions?

My wife's brand new iphone4 (which was a replacement for a 4month-old iphone4 with home button issues) is not recognized by itunes. Every other ios device on the computer/Apple ID in question is recognized and syncs perfectly. Any suggestions?

If the new phone has already been setup, make sure the phone and iTunes are both set to the same account.
You might also have to authorize this computer for the new device under the store menu.

Next and previous button issue with Prettyphoto in filtered gallery

Hi there,
I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
(next and previous buttun are there as well social connection)
My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
(social connection is there but no next and previous buttons??)
Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
Your help we muchly appriciated,
Best Regards,
Rolf

bump PLEASE HELP

Javascript error in Safari (sequel to roll-over button problem)

Yesterday I started a thread on non-functioning roll-over buttons in Safari.
In the mean time (with the help of iBod) I founs out that the problem has got something to do with JavaScript.
The problem occurs in sites I built with FreewayPro 4.0.1
The url's:
www.wildeplantentuinen.nl
www.kunst-zin.nl
The problems occur only in Safari (2.0.2 and 3.0)and not in some other browsers (even ana IE version of 2001 works great)and probably since the last Tiger Update (10.4.11)
The JavaSriptConsole gives an "Undefined Value" error for all of the non-functioning elements on a specific line.
Any Javascript-gurus around that could help me. (I am not a code-wizard at all).

Thanks ra5ul,
That (more or less) solved the problem, . . . . . . but what is going on ?
I edited all sourcecode of numerous html-pages by hand and now they work the way they should in Safari.
But now every time I make a small change to any page, my web-building program changes the code back to the old syntax (which, again, all browsers can read except Safari).
Why does the problem only occur in Safari ?
I hate to put a line on the index-pages that Mac users should not try this website in Safari.
Problem is, I made these sites in Freeway and I don't want to upgrade that program because I switched to Dreamweaver and iWeb (for the simple ones).
Is there a smart work-around ?

Over MobileMe Issues

I am totally over mobileme issues yet I love iWeb. Can anyone recommend a good hosting site that is compatible with iWeb? How do I upload the site etc without using mobileme?

studentoflife wrote:
Can anyone recommend a good hosting site that is compatible with iWeb?
All hosting services should be compatible with iWeb — but if the hosting service offers a choice of WIndows servers or Linux servers, choose Linux.
Some recommend this hosting service — particularly for its support:
http://www.hostexcellence.com
studentoflife wrote:
How do I upload the site etc without using mobileme?
This video tutorial may help:
_Publishing your website via FTP_

Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall I do.Thank you

Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall I do.Thank you

It can only be serviced in the country where it was originally sold. Take it back to the US or send it to someone you know there to take it in for service.

Roll over buttons showing on all layers?

Hello,
I have created an interactive presentation in indesign CS4, I have a series of photos which all have roll over button states applied to them so they when you click the photo they will then show profile content for that photo. These are on separate layers and above the main content layer. When I export to Acrobat 9 the layers show in the correct order but when I then set the buttons up to show and hide the profile layer the photo button which is on a lower layer and should then be partially hidden by the profile panel but now sits on top of the content panel? Is this just the way it is in Acrobat or is there a setting in indesign I am missing as I did want the panel to pop up with a drop shadow etc you can still see part of the original photo underneath, is this achievable or do I then need to set a action to hide the initial photo button?
I have ran tests using just hyperlinks and these work and the photos then stay in the correct order but ideally I wanted to use rollovers.
Many thanks for any help.

Hello,
Unfortunately, you're in the Acrobat.com forum - not the Acrobat forum (confusing, we know). Here's the link the forum you're looking for:
http://forums.adobe.com/community/acrobat
Good luck!
Rebecca

IPhone 5 Power button issues after recent update.

After this most recent update, my power button is not working as it normally does. It takes two or three attempts to turn the phone off and more than once to turn it. Sometimes it turns on and immediately turns off. This is happening only after this update.

Yes 7.1.2 I had a 7.1 backup, and no issues with that... but then I did a clean DL of 7.1.2 and once again with NO apps on the iphone power button issues... as mentioned. So it is not the apps, nor songs, nor anything else...just 7.1.2 I am now running 7.1 no issues.

WHY DOESN'T MY VOICE OVER BUTTON GIVE ME THE BATTERY STATUS

I have tried to use the voice over button to hear my battery status but it doesn't work. Any suggestions?

What generation Shuffle do you own? How are you trying to hear the battery status?
Identifying iPod models
B-rock

Hovering over button in WAD

Hi experts,
Is there any feature in WAD of hovering over button (Buttons have a "hover stateu201D property) so that if put
mouse cursor they are highlighted the additional information over button.
thanks
take care
vishal sharma

Rezo,
"Standard Overlay Menus" function the way you are needing.
I would highly advise you to dump the multi-layer menu creation method you've been experimenting with (this marks the 9th anniversary I've been harping on this exact subject ).
You haven't seen your boss go ballistic, till you get all the calls from your customers saying their disc they bought from you navigates too slowly, gets hung up in players, etc.
Go with the Standard Overlay Menus; these are the only types of menus that should reside on DVDs slated for mass release.
Take care,
Trai
TFDVD Research Labs

My ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?

my ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?
thanks

This document explains setting up and using VoiceOver.
http://support.apple.com/kb/ht4322
The overall settings for VoiceOver is on the shuffle's Summary screen in iTunes.
Artist name and song name - Press and release the VoiceOver button.
The playlist menu - Press and hold the VoiceOver button.

My ipod shuffle voice over button does not list the song/artist or give battery status. I am following direions but it doesn't respond wether I push it once or twice. Any ideas?

?The voice over button does not work per directions (press once for title/artist; press twice for battery status. Any ideas how to make this work?

I discovered that if I push the button quickly (twice), I get the battery status. But I still do not have any title artist data. The music get quieter but no info.

Overly button issue

Similar Messages

Maybe you are looking for