Overview Report -projects from PS

Hi Guru's
M trying to execute std query based on 0ps_c04_q0002(Overview Report -projects ), but m getting diff values ,
some of that values in -ve,overall result is also in -ve ,
if i want to execute it ,which data sourses do i need to concider ,m not getting revenue values for a selected project ,
and if i want to reconcilate with R3
what is the Tcode fro actual/planned costs vs revenue and work,
m getting values for the work in Hours like 1234HR,
guys can any one pls tell me how to execute this report correctly??

Hey Sruan,
I had no much time to pull d overall report 2day - some sourcesystem problem for sandbox loads
my pblm, is m not getting revenue values
Revenues: planned
Currency type (20), posting period (1-16), key figure type (revenues and corresponding quantities), version (plan version), value type detail (1-4), value type for reporting (actual), key figure (project plan)
Revenue Planned Costs is a sap defined restricted key figure ( its not coming from 0PS_C04 its a query element ) & it has its own restrictions . As mentioned above it is restricted to 0Amount -> Curr type 20.....keyfigure type - 1002 ( something like that )version - 20 ..etc.
But only 0Amount is used for all these Revenue costs, Actual costs etc.
For the set of restrictions how the Revenue Planned Costs is defined, der may be no relevant data .....no data for the same selections in ur 0PS_C04.
Try loading both 0co_om_wbs_1 & 0co_om_wbs_3 - > this shud get u some planned costs atleast.
Revenues: actual
Currency type (20), posting period (1-16), key figure type (revenues and corresponding quantities), value type detail (1-4), value type for reporting (actual), key figure (amount)
The same applies for Revnues Actual.
Load all 6 wbs datasources for enough data.....luk at RSA3 data for each extractor giving the selections for the Revnue Restricted Keyfigures.
For actuals load 0co_om_wbs_6...n so on.
I beleive u shud fetch enuf data from wbs1, wbs3 & wbs 6 datasources...if not it implies der is no relevant data in ECC.
Or
If ur jst luking for a quick report to present -> copy the query to an other one using Tcode RSZC - n remove restrictions like keyfgure type etc...

Similar Messages

ProjectUID selected from the reporting database from Project Server OnPublished event is taking some delay

Hi all,
I'm invoking a stored procedure from the reporting database from the project server onPublished event. I'm having some issues in getting the details of that particular project from the published event handler. This i noticed that there is some
delay is taking place in moving the data(project uid ) from the published to the reporting database .
My stored procedure select statement is as follows:
SELECT ProjectUID, ProjectName FROM MSP_EpmProject_UserView
　WHERE ProjectUID=value
This stored procedure is invoked from the onPublished event of the project server event handler where that particular projectuid is passed in that stored procedure.I have noticed that some delay is taking palce to move the data into the reporting database.
My stored procedure got invoked from the onPublished event of the project server event handler before the delay is complete. So the row selected from the stored procedure is alwys zero (0). Is there any other method to wait for repoting database
to get refreshed. Please help me .

Hi sabithad,
The issue you are facing is because of the conflict of permissions, event handlers always works through administrative user credentials whereas the project is open in edit mode by the logged-in user. And you are tyring to update custom field at the back
end with Administrative credentials, while project queue is in process by logged-in users credentials. Its not gonna work this way :)
The best option is to use Javascript on your PDP using CEWP, you can either build your complete logic in JavaScript and place that code on your PDP. OR you can use the combination of JavaScript and PSI and create a webpart to be placed on PDP.
below blog link willgive you directions to go ahead with, but for sure the solution to your query is
JavaScript :)
http://epmxperts.wordpress.com/2012/05/21/generate-unique-id-for-project-using-a-webpart/
hope this helps.
Khurram Jamshed - MBA, PMP, MCTS, MCITP (
Blog, Twitter, Linkedin )
If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

SAP report similar to CN41(cost overview report) in EUR

All,
All figures shown on the cost overview report which is triggered from the project structure should be in company code currency NOT USD. Is there any config setting which will show results in company code currency but not at controlling area level.
Request your input in this regard.
Regards
Kasi

Hi Kasi,
Please try setting the project currency in the project profile OPSA under 'Organization' tab to meet your currency requirement. Otherwise you can also use settings in OPSB for setting the planning currency as required.
hope this helps.
Thanks
venu

Standard Extractor for Sales Overview report

Hi Experts,
Can you all please help me in finding the Standard Extractor for Sales Overview Report, fields like Product Group, Product, Net Sales, Billed Qty, Sales Plan, % Variance Plan etc are present in this report, i tried to search this in transaction RSA5 but wasnt able to find it. Also, if there is no std extractor then can you please provide me the name of the database table so that i can create a generic datasource on it.
Thanks & Regards,
Amit Naik

Hi Sathya,
I have received an initial Requirement from the Client (Please refer the list below), It gives us the Report Name & the fields involved in it, i need to tell them the feasibility, can you help me on this? Are there any std reports available for the same?
Report                          Possible fields
On Time Delivery-     Month to date on time in full, Year to date on time in full
Pick Performance-     Days from Pick List Receipt to Despatch
Delivery Performance-     Days from Order receipt to despatch
Costs-                          Total Cost per unit despatched,Labour Cost per unit despatched,Monthly spend vs budget by cost centre
Stocks-                          Openshaw Stock Volume vs budget,Openshaw Stock Value vs budget,Stock Movement by product / range month on month,Stock Turn
Returns-                          Volume and Value by major type
Orders in Pick-     Volume and Value
SMU-                          Outstanding Special Make Up Work
PI -                          Percentage bins 100% accurate
Space-                          Count of empty bin locations
Progress to Budget for month-     Budget, Forecast and latest estimate.,Invoiced to date, in pick, outstanding,Shortfall to find.
Profit and EBITDA-     By Brand / Customer / Account
Monthly pack     -                     Equivalent
Outstanding PO's-     Volume and Value, by brand / category,Expected receipts this week,View of inbound scheduler (Empirica)
Vendor Management-     Value of PO's with major vendors,Vendor on time delivery,Vendor Rejections / QC problems
In Bound Carriage-     Cost of Carriage for month vs budget,Airfreights agreed,PO's Inbound
Out of Stock Report-     Items where there is zero or projected to be zero stocks,Back Order volume value
Progress-                          Number of designs in development,Number of designs late against Critical Path
Thanks & Regards,
Amit Naik
Edited by: Amit Naik on Sep 20, 2010 9:28 AM
Edited by: Amit Naik on Sep 20, 2010 9:35 AM
Edited by: Amit Naik on Sep 20, 2010 9:38 AM
Edited by: Amit Naik on Sep 20, 2010 9:43 AM

Discoverer report - Output from Discoverer plus is not the same as Discoverer desktop

As a part of Upgrade project we are migrating the discoverer reports from 11i (11.5.10.2) to R12 (12.1.3) .After migrating to R12, for a custom discoverer report the output given by discoverer desktop is correct (24 rows for a scenario). But the report output from Discoverer plus does not show the credit transactions (2 rows). The output from Discoverer plus shows only 22 rows (24 - 2), which is incorrect. The query is the same in Discoverer desktop and Discoverer plus.
Please let me know why these transactions that are appearing when the report is run from discoverer desktop are not appearing in discoverer plus. Is there any setup in discoverer plus for this?
Regards,
Brajesh

Pretty hard to answer a question like this. Best bet would be to copy the existing discoverer plus book and start removing conditions, fields, etc until those two rows from desktop show up and see if you can work it out.

Unable to change window properties after upgrading project from X5 to RH8

Hi,
I just upgraded an existing project from X5 to RH8. In Windows Properties (HTML Help), if I make any changes and click OK, I receive the following message:
"For Width field please enter a value between 65 and 24."
If I do enter a value within those parameters in any of the "Width" options on the Properties page, I'm still presented with the same error message.
How can this be corrected?
Thanks!

Hi there
Perhaps try creating a totally new window definition and configuring the parameters as desired.
Once in a blue moon we see that the window definition somehow becomes corrupt.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Want to open another project from Quiz Results - can't get it to work.

I have been trying to get my course to open another project (an instruction slide) after the user completes a quiz and it is not working. The course always closes after the quiz results. I have set the Project End Options and the Pass or Fail options to all open another project (the instruction slide), but instead, after the user clicks 'Continue' on the quiz results page, the course always closes. What could I be missing? (Am using Captivate 5.)

Just finally getting my head above water and am able to respond and update. Yes, I was using a tool called RELOAD to update the imsmanifest file. Actually a great tool that I can recommend now that I worked out the kinks with Captivate. Please see this post for more information. http://www.caddicks.com/blog/2012/02/17/how-to-publish-a-multi-file-captivate-project-as-a -single-scorm-course/#comment-249711
Here's a quick summary of how I ended up resolving this - I can't even remember all the different options I tried until I settled on this! I never resolved the issue with launching another project from the quiz results page, but found a workaround that works even better.
The course starts with a brief introduction module. The 'Continue' button on the last slide is set to launch another project, which opens the course's 'main menu.'
The 'main menu' project has several buttons that launch appropriate sub-topic projects.
On the last slide of each of the 'sub-topic' projects has the 'Continue' button set to launch the 'main menu' again. Each of these had quiz questions, but feedback was set at the question level only - no quiz results page.
The last option on the 'main menu' project was a 'Course Completion' button - which launches a project containing the final quiz. (NOTE: This was always the only project that had the "Show score at the end of the quiz" set to display under Preferences / Quiz / Settings. After a lot of hair-pulling, I realized that it wasn't necessary to open another project to accomplish what I wanted to do, which was return the user to some basic instructions before they retook the quiz.)Here is how the last project was set up.
The first slide is a content slide with instructions for the quiz. When the user clicks the "Back" button from this slide, it will launch the 'main menu' project. 'Next' simply goes to the next slide.
Slides 2-5 are quiz questions
Slide 6 is the quiz results slide (turned on under Preferences / Quiz / Settings). Buttons are: Review Quiz and Continue.
Slide 7 is a content slide with instructions on what to do next. This slide has a text button that I called "Retry" and under Properties / Reporting for the button the "Include in quiz" is NOT checked. The Retry button takes the user back to the first slide in the quiz.

Reports Migration from 6i to 10g

In my Project we are having many reports .and we are trying to Migrate those from 6i to 10g can anyone tell me what are the suggestions i can make during this process .. i am the only person who is going to involve in complete migration solely. Any Ideas and suggestions welcome ..

Hello,
Oracle Reports: Migration from 6i to 10g
http://www.oracle.com/technology/products/reports/migration/index.html
FAQ Migration
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm
Regards

Error in deploying BPEL project from Jdeveloper

Hi all,
I am using Jdeveloper 10.1.3.4.0.
For the first time BPEL project deployed successfully, but when i am trying to deploy second time it's giving the below error.
BUILD FAILED
D:\jdevstudio10134\jdev\mywork\AIA_POC_Application\AIABPELProcess1\build.xml:77: A problem occured while connecting to server "172.16.122.234" using port "80": bpel_AIABPELProcess1_1.0.jar failed to deploy. Exception message is: Error deploying BPEL suitcase.
An error occurred while attempting to deploy the BPEL suitcase file "D:\SOA10.1.3.5\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\bpel_10514847.tmp"; the exception reported is: archive cannot rename D:\SOA10.1.3.5\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\.bpel_AIABPELProcess1_1.0_a5bf50a13f9cba731b8f263f2431a17c.tmp
pls help me.
thanks
mani

Can you check these things :
1) is this issue with only this project ? Try deploying some other project
2) try deploying this project using ant (change values in build.properties and right click on project -> run ant or something like that, use default deploy target)
3) try undeploying project from server and then redeploying it again
also, why is it connecting to port 80? normally it is 8888 or 7777 right?
regards,
Ketan

Publication of the big-sized Enterprise projects from Project Professional 2013 to Project Server 2013 takes about 60+ minutes.

Dear Sirs,
I need your support over the following MS EPM 2013 issue:
Publication of the big-sized Enterprise projects from Project Professional 2013 to Project Server 2013 takes about 30+ minutes. We
need to reduce this total publication time down to acceptable working values 10+- minutes.
Environment information:
Single App Server (Virtual): 16 Gb RAM, x64 4xCPU, HDD > 50 GB free disk space, OS Windows Server 2012 Standard Edition x64 Service
Pack 1, MS SharePoint Server 2013 and MS Project Server 2013 with CU December 2013 (KB 2850024) applied.
Single RDBMS MS SQL Server (Virtual): 8 Gb RAM, x64 4xCPU, HDD > 200 GB free space, OS Windows Server 2012 Standard Edition x64 Service
Pack 1, MS SQL Server 2012 x64 SP 1 Enterprise Edition.
We have 1Gbit LAN between APP, DB server and 1Gbit LAN between APP and Proj Prof Client.
Yes, we are on the way of migrating to the Prod environment
with 3-tiered architecture (with SP1 slipstream and CU December 2014 applied), but this issue also
presents there.
Project’s file information:
Tasks in the file: [~4900], resources in the file [~396] enterprise task’s custom fields used in the file [~23].
Project save procedure for this new project would last about 7 minutes. Project publication would last about 47 minutes. We noticed that
tasks synchronization process took about 1 second for each ~2,5 tasks, to add them to the sharepoint tasks list. So for all 5148 tasks it took about 5148/3/60 = 34 minutes. Other 13 min was used for reporting database publication and other tasks relevant
for new sharepoint site creation.
Case 1: Issue description:
During the Enterprise project’s file save and publication we have the following sharepoint 2013 log messages:
07.31.2014 12:43:17.22 Microsoft.Office.Project.Server (0x0358) 0x3D5C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope
(Persisting list changes). performing time =376.068676326181 22dca99c-4696-70f1-e9e2-06851d0bcffd
07.31.2014 12:43:17.69 Microsoft.Office.Project.Server (0x0358) 0x3D5C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope
(Persisting list changes). performing time =361.652807828928 22dca99c-4696-70f1-e9e2-06851d0bcffd
It shows that sharepoint spend at least ~350 milliseconds (or 0,35 sec*4900 tasks = 1715 sec, or 28,5 min) for each task update during
project publication. And we also have another log file that shows that about 0,7 sec (or 0,7 sec*4900 tasks = 3430 sec, or 57 min) sharepoint spend for save each task in project file to project server. So total save and publication time more then 60+ minutes
for that project file. The same result we have even if user didn’t do any changes at the project file.
We use only enterprise projects (dbo.MSP_EpmProject_UserView.projectvisibilitymode = «False»), and do not use sharepoint tasks lists,
but the synchronization between MSP Plan and SharePoint tasks list works at any case.
Case 2: Issue description:
- For the second test we created a new project with new sharepoint project’s site on basis of our «issue» project, with total amount
of tasks in it of 5148 (yes, we increased the tasks list default limit at the sharepoint site up to 6000 items in it – standard limits for sharepoint view list – 5000 items).
- Project save procedure for this new project would last about 7 minutes. Project publication would last about 47 minutes. We noticed
that tasks synchronization process took about 1 second for each ~2,5 tasks, to add them to the sharepoint tasks list. So for all 5148 tasks it took about 5148/3/60 = 34 minutes. Other 13 min was used for reporting database publication and other tasks
relevant for new sharepoint site creation.
-Then we deleted the
tasks list for that new test project from the sharepoint site and republish the project plan one more time. This time project save procedure took about 7 minutes, project publication about 2 minutes and 3 minutes for other relevant queue jobs. So total time
is 12 minutes.
As a conclusion: yes, we have determined
the exact problem - during synchronization process (from Project Server to SharePoint) it perform copying all tasks and related data from Project to SharePoint in spite of fact that you changed only ONE task or ALL of them. At any case, synchronization will
copy ALL of them from Project Server to SharePOint task’s list.
Our workaround is to disable the task’s synchronization for such big-sized project plans:
– to delete the SharePoint «tasks» list at the SharePoint site tied with project plan.
- or deattach the SharePoint site from the project plan.
Thank you for reading this topic, please if you also forced with such issue provide us any known workaround or maybe any official response
\ feedback from MS about it.
Thank you in advance,
Best Regards, Andrey

Regarding my topic, I also said that every time when sync works it updates All items from project’s plan at Project Server to corresponded task’s list at SharePOint server. Inspire of the fact that you changed only One task or group /
all of them at your project’s plan.
And it seems to me and my colleagues that it’s probably (maybe) a “bug” at the product. Here is what we have if looked a little bit closer to the code:
Share Point determines what task to sync from Project’s plan to sharepoint list. To do that sharepoint needs to know was that task changed or not, based on the following fileds (check SQL stored procedure “[MSP_READ_TASKS_FOR_SYNCRONIZATION]”):
TASK_UID TASK_NAME TASK_START_DATE TASK_FINISH_DATE TASK_PCT_COMP TASK_PARENT_UID TASK_OUTLINE_NUM
WSS_LISTITEM_UID TASK_ID TASK_IS_ACTIVE
We noticed that at any case synchronization performs for all tasks, EXCEPT the ROOT one. Then we looked at the comparison of TASK_PARENT_UID field. So sharepoint compares TASK_PARENT_UID with ParentID (this is internal name for lookup
field “Tasks” at the Sharepoint, and it stores their values at the format "ID;#Title").
And comparison performs like following:
SharePoint looks for Task at the Tasks’s list corresponded to Project’s plan with ID represented at the TASK_PARENT_UID field. Then it takes SharePoint ListItem ID (“int” type) and store it to the “num” parameter;
num = this.GetCachedListItemByUniqueId(listItem.ParentList, nullable.Value).ID;
2.Then it compares “num” with task’s “ParentID” at SharePOint as follow with operator “!=”:
((SPItem) listItem)["ParentID"] != (System.ValueType) num
3. If comparison was success (true) – then it tell us that values (at the Project’s plan for tasks) was changed, then it need to be synchronized. Corresponded Method setup “true” flag, and then returns it.
The “bug” is that this expression at the Step 2 will always return “true”, because in fact it compares “string” (see above – that this is lookup field at SharePoint side)
with “number”. For example if the parant task ID is “55”, then we get:
"55;#Task 1" != 55
And by the rules of .Net the “string” will never equal “number”
Furthermore this is approved by the SharePoint logs:
In that case we always get the note “Setting ParentID to” at the logs (we see it if turns on Verbose for “Project Server” -> “Sharepoint Integration” category).
So at any case of publishing project’s plan we always get that note at the logs for tasks that have Parent task, and we have Parent for all of them EXCEPT the ROOT one, exact logs represented further:
10/15/2014 02:37:32.26 Microsoft.Office.Project.Server (0x07D8) 0x06E8 Project Server Sharepoint Integration ado0d
Verbose Setting ParentID to 1 bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.62 Microsoft.Office.Project.Server (0x07D8) 0x06E8
Project Server Sharepoint Integration ado0d Verbose
Setting ParentID to 1 bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.63 Microsoft.Office.Project.Server (0x07D8) 0x06E8 Project Server
Sharepoint Integration ado0d Verbose
Setting ParentID to 1 bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.67 Microsoft.Office.Project.Server (0x07D8) 0x06E8 Project Server
Sharepoint Integration ado0d Verbose
Setting ParentID to 1 bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d 10/15/2014 02:37:32.69 Microsoft.Office.Project.Server (0x07D8) 0x06E8 Project Server
Sharepoint Integration ado0d Verbose
Setting ParentID to 5 bf2fc29c-7727-b00d-fa4a-34f22ea9ec1d
The following is the complete Method’s code from the corresponded reflector:
private bool UpdateParentID(DataSet taskDS, DataRow row, SPListItem listItem, Dictionary<Guid, SPListItem> redoEntries)
bool flag = false;
int index = taskDS.Tables[0].DefaultView.Find((object) DataRowExtensions.Field<Guid>(row, "TASK_PARENT_UID"));
if (index >= 0)
Guid? nullable = DataRowExtensions.Field<Guid?>(taskDS.Tables[0].DefaultView[index].Row, "WSS_LISTITEM_UID");
int num = -1;
if (listItem.Fields.ContainsField("ParentID"))
if (nullable.HasValue)
try
// STEP 1
num = this.GetCachedListItemByUniqueId(listItem.ParentList, nullable.Value).ID;
catch (ArgumentException ex)
if (redoEntries != null)
if (!redoEntries.ContainsKey(DataRowExtensions.Field<Guid>(row, "TASK_UID")))
redoEntries.Add(DataRowExtensions.Field<Guid>(row, "TASK_UID"), listItem);
//STEP 2
if (num != -1 && ((SPItem) listItem)["ParentID"] != (System.ValueType) num)
((SPItem) listItem)["ParentID"] = (object) num;
ULS.SendTraceTag(845443U, (ULSCatBase) ULSCat.msoulscat_PS_ProjectSharepointIntegration, ULSTraceLevel.Verbose, "Setting ParentID to {0}", new object[1]
((SPItem) listItem)["ParentID"]
//STEP 3
flag = true;
else if (((SPItem) listItem)["ParentID"] != null)
((SPItem) listItem)["ParentID"] = (object) null;
ULS.SendTraceTag(2495056U, (ULSCatBase) ULSCat.msoulscat_PS_ProjectSharepointIntegration, ULSTraceLevel.Verbose, "Resetting ParentID to null");
flag = true;
return flag;
Any thoughts about it would be much appreciated!

Unknown Error occur when trying to get a visual report - Project 2013

I have office 2013 home and student and ms project 2013. I am trying to get it to do visual reports and
all i keep getting is an error message saying an unknown error has occurred and the requested action cannot be completed at this time. help please if anyone knows a solution.
i got all the updates for Project and to Office.
the problem also occur on a different machine , with a different OS.
Please help ! , this is important feature of project that i must have working.
Thank you.

Hi Ariel,
Have you tried to repair MS Project from the control panel?
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

How to transport the report object from development clint to quality clint

any body knows different ways of transferring report object from development clint to quality clint.pse send ...

Hi..
LSMW:
There are 2 ways for transporting LSMW data from a system to another.
Export/import this method gives you the opportunity to select the subprojects or objects you want to transfer. LSMW -> Extras -> Export project
Transport request with this method, you can transport a LSMW project in full (you can not select the objects you want). With this method, the project will be transported as any other SAP object in a transport order. LSMW -> Extras -> Create change request
Program variants
If you have several program variants in a development system that you want to transport, use the following method to transport them:
Execute program 'RSTRANSP' (via se38) and inform the program and/or variant names (you can transport variant of several programs in one shot).
Layout
In some transactions, one can save layout of the screen (sort, filter, ... criteria).
These layouts can be transported: In the required transaction, when your layouts have been saved, go to Settings -> Layout -> Layout Management. Select the desired layouts and go to Layout -> Transport... There you can add your layouts in existing TO or create a new one.
Database data
In some unusual cases, you might have to transport data of a SAP table.
Go to transaction SE16, select your entries and go to Table entry -> Transport entries. It's only possible for some tables...
If you cannot do it that way,you have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list.
Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TABU
Object name = Name of your table
Double-click on the created line and, depending on your need, put '*' in the key field or double-click on it and select the key you need to transport.
Queries
Queries, datasets and user groups can be exported/imported between the systems using the Program RSAQR3TR.
Report template (ALV variants)
There is a button or somewhere in the menu Change/Select/Save/Manage Layout.
Go to Manage Layout, than Layout menu/ Transport.
SAPSCRIPT Files Transport
Use the program RSTXSCRP to upload and Download the SAPSCRIPT files to different systems
Transport SAPSCRIPT
Use the Program RSWBO052 to create the Transport Request for a SAPSCRIPT, In the Selection screen of the program, give R3TR FORM Give the Form name and press Execute button, it will ask the Development Class and the transport Request No.
Standard texts
Standard texts used in SAPScript(created with transaction SO10) can be included in transport orders. You have to create a Workbench transport order with transaction SE10. When created, click on it, go in menu Request/task -> Object list -> Display object list. Go in modification mode and add a new line with:
PgmID = R3TR
Obj = TEXT
Object name = TEXT,,ST,
Example :
R3TR / TEXT / TEXT,YMM_MEDRUCK_MAIN_16_EC,ST,F
Reward if useful
~Lakshmiraj~

SSRS Reports migration from 2005 to 2008R2

Hi ..
I have couple of questions.. looking for answers
Am new to report migration. We have 1000+ of reports in 2005 which we need to migrate to 2008R2. After googling theweb i got to know that we have an third party utility RSScripter which is used to move the reports from 2005 to 2008.
Question 1:
By using the above tool i was able to migrate the reports from 2005 to 2008. However, i am not able to redeploy the reports to sub folder in 2008..
Example i have some reports in 2005 at Dev_reports\Reports\.. when i want to copy these reports to Dev_reports\Reports folder they are not moved to sub folder Reports on destination server, but rather they are copied to root folder. Is there any why
that i can copy the reports to particular folder in destination server.
Question 2:
When moved the reports from 2005 to 2008 are all the reports are automatically upgraded and copied to new server(2008)? or we need to explicitly open each and every report in 2008 and deploy to the new report server(2008)?
And my third requirement is to create couple(2) solution for the above said reports and check in them to TFS as a reporting project.
one report project with all the reports from 2005 and another with all reports from 2008.
Appreciate your responses at the earliest. As this is on top priority.. Thanks in Advance
Sri

Hi Sri,
Per my understanding that you are using the RSScripter to move the reports from SSRS 2005 from SSRS 2008 R2, now your first problem is you don't know how to move the reports from the sub folder of 2005 to an specify folder on SSRS 2008 R2, right?
I have tested on my locak enviroment and can reproduce the issue, by default, when you execute the .cmd file the report will move to the new server's root folder, for example, you have an rdl report in SSRS 2005 which path is "/Test/report1.rdl"
, when you move to the SSRS 2008 R2 using the tool it will move to the path "home/Test/report1.rdl".
If you want to move this rdl to the specify folder "home/Test0323/Test/Report1.rdl" you should do the action as below:
Create the specify folder on the SSRS 2005 but not SSRS 2008 R2, move the subfolder and the rdl in it "/Test/report1.rdl" to the specify folder
find and check the "/Test0323/Test/Report1.rdl" in the RSScripter:
the Output will have the path like "Test0323/Test/Report1.rdl",after move to the SSRS 2008 R2, it will also create the path like "/Test0323/Test/Report1.rdl"
More details information about using the RSScripter tool:
Migrating SQL Reporting Services to a new server
For the second question, Generally, reports are not upgraded when you upload a report definition file directly to the report server or SharePoint site. The report is automatically upgraded the first time it is viewed, but the stored report definition file
remains unchanged. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
Similar thread:
If I upload RDL 2005 template on SQL Server
2014 then will SQL Server 2014 render it without migrating it to 2014 ?
Details information about upgrade and migration in the below articles for your reference：
Upgrading Reports
Upgrade and Migrate Reporting Services
For the third question please reference to below article:
TFS Reports using SSRS
Using TFS2010 with Visual Studio / BIDS 2008 and SQL Server Management Studio
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Crystal Reports functionality from Save The Cat

Sorry if I've missed this in the presentation video since I've only watched half of it, so I have no idea if this has been considered for development.
I use "Save The Cat" from Blake Snyder to storyboard my scenes with Crystal Reports - minus his structure.. and I create my own story templates and then drop the whole thing into "Final Draft".
If I had the flexibility to setup and re-use "structure" templates that would contain my scene cards with an overview of my scene cards as the structure under my script and the ability to toggle between the two...then where do I sign on the dotted line?
If you could integrate this functionality into this software - and as I say, I'm not sure if you've done this - then I'm sold. In other words, you build with the cards, and worry about the script later.
Cheers,
C.

I need more info from you. I have looked for info re. Powerbuilder 11.5 here:
http://www.sybase.com/products/modelingdevelopment/powerbuilder
but I can not find any mention of Crystal Reports as it would apply to Crystal Reports being part of Powerbuilder 11.5. So, I need more explanation of this:
I'm trying to use the Crystal Reports ocx from Powerbuilder 11.5
Also, in the title of this post, you mention:
Crystal Reports RDC from Powerbuilder.
RDC and OCX are quite different technologies. It's one or the other. Thus please provide the following info:
1) Is the CR component you are using (be it an OCX or RDC) part of Powerbuilder? Or have you purchased a stand-alone version of CR and are using the component in Powerbuilder?
2) What component are you actually referencing?
3) What is the version of the Crystal Reports you are using?
Ludek

BAPI/FM to Create Projects from Templates

Is there any BAPI/FM that can create Operative Project Structures referring the Standard WBS including all objects i.e, WBS,N/W,Activities,Milestone of standard project?
If not, what could be the work around?
Regards
Sreenivas

Hi Robin !
        I have the same issue here, to create projects from a template, using a Function Module to do that, and I tryed to use the FM CJWB_PROJECT_COPY as you suggested, and I achieved to create project from template but, for any reason not known by me, the project is created without status object, so I can´t open it on any transaction(CJ02/CJ03/CJ20n...). I have tested it in SE37, using test sequences, so I call it and BAPI_TRANSACTION_COMMIT to save the data.
        To make the projects available to work, I needed to run a report named CNSTATUS as explained on SAP Note 170948.
        Do you know why using CJWB_PROJECT_COPY created the projects without status object assignment ? I could not find any documentation about this function, so maybe the problem can be caused by some wrong parameter that I was passed to it.
        Do you already used it ? If yes, can you send a sample code ?
        Thank you in advance, and best regards !
        Wilson

Overview Report -projects from PS

Similar Messages

Maybe you are looking for