OWB 10 R2 detailed presentation required and sequence jump problem
Hello all
Firslty i urgently need a presentation on OWB 10g R2. I have to deliver the presentation in next week to train people.can any one of you can help me out.
secondly, i m facing a sequence jumps when i excute a mapping in upinsert mode.can any one of you suggest any formula for avoiding sequence jumps.
Hi.
it's hard to find a solution without access to your system.
I would do several things:
- gather new stats for the repos schema
- purge old audit information
- look at the execution plans of the mappings to find some abnormal behaviour
- compare the mappping code and the execution plan with scd2 and without
- use the database tools (like em) or 3rd-party-tools to analyze the performance/warnings/alerts of the system
- analyse if some databbase parameters was changed.
- look if some other processes (from other projects) run at the same time like my loading mappings. Perhaps this reduced the cpu or i/o performance.
Regards,
Detlef
Similar Messages
-
How to present requirements and conventions?
I'm curious how others go about designing their presentations
to incorporate the nuts and bolts stuff.
Do you typically have a systems requirements page in the
presentation? List requirements outside the CBT where the CBT is
hosted? How about conventions and instructions for use? Page or
pages within the CBT? On the page where the CBTs are hosted?
For those of you who integrate this stuff, do you make the
information mandatory by placing it in an introductory section or
optional by leaving it somewhere for access on a "need to know"
basis?
Thanks,
AndrewAgreed with jbradley if it's hosted in an LMS. The 'how to
use' lesson
is generally a standalone, separate lesson in the LMS course.
If it's not for LMS delivery, we typically bundle all lessons
into an
overall course using a 'shell' or container program developed
in Flash.
The Flash shell lists the lessons on a left-side menu
(sometimes
collapsable if needed), the first of which is the 'how to
use' lesson.
If system requirements need to be listed, we usually make
those part of
the installer or ReadMe file and do not include them in the
course
unless the client so requests.
Erik
awright34 wrote:
> I'm curious how others go about designing their
presentations to incorporate
> the nuts and bolts stuff.
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware -
Hi All,
I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
But the user wanted the data to be populated from only the present year and the previous year.
So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
PROPERTY PALETTE (ENQACMDTL block)
WHERE Clause
SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
ENQNO
RATNG
2013900054
500KC2
2013900047
800KC4
2013520018
750KC6
2012900037
1000KC2
2012520109
500KC2
2012140019
750KC6
2011540036
500KC2
2011100030
1000KC2
2006100007
90KD8
2006750014
750KC6
2006900072
500KC2
The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
So when i query on the field 'RATNG',
Example:For RATNG=500KC2;
I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
Other than 500KC2 RATNG, no other RATNG must be displayed.
The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
Can You Help me or tell me what do i do for this?
Hope I'm clear with my question!!
If my question is not clear, let me know plz.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle forms 6i.On key-exeqry you have to program. Delete all other trigger codings for checking your condition.
It dint work on key-exeqry.
I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
It did not display the message.
I have a 'PUSH-BUTTON:EXEC_QUERY.
For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
I added the following code:
if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
raise form_trigger_failure;
else
execute_query;
end if;
It is working fine and the message is being displayed.
But again I have a new problem and that is;
On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
How do i solve this?
Thank You Priyasagi. -
Possible deadlock: transactions, cursors, and sequences...
Hello,
After making recent changes to our database in response to a previous issue (bug found and patched in BDB; local code fixed by removing both DB_TXN_SNAPSHOT and DB_MULTIVERSION) we've come across a possible deadlock.
BACKGROUND:
This database has been running for over a year in production and I've never seen a hard deadlock. We use the default deadlock detection engine internal to BDB, transactions, and our code supports the processing of deadlocks and subsequent retries and final abandonment when necessary. The transactions in question involve cursors and sequences; we're using cursors to flip through entries in an existing database, and should no match be found for an update, we insert a new record. Before doing so, we grab the "next ID" (primary key) from a sequence we have (attached, as all sequences are, to its own different DB, done on advice from online docs: "For this reason, it is often preferable for sequence objects to be stored in their own database.") and finally insert the new record.
This is a 64-bit Linux machine. There were 4 operational threads at the time; all were waiting on pthread conditions. As I understand it, deadlocks should have been internally detected and returning DB_LOCK_DEADLOCK to us somewhere? Since we're using the default lock detection engine and firing it constantly, we should not require an Nth thread to monitor the lock tables and manually reject deadlocked transactions, etc?
I wasn't sure what to do when the deadlock occured, but I found some forum posts referencing a db_stat -Co and ran it, along with grabbing a core dump which I still have available. I've reverted the DB binary to older DB_MULTIVERSION code as I work on figuring this out, but if there's something else crucial I should have done, I can run the new code again and wait for another deadlock to happen to run additional diagnostics.
Any ideas or assistance is appreciated. Thank you.
DEADLOCK INFORMATION:
THREAD 2: Attempting to 'get' an asset.
(gdb) bt
#0 0x00002aec07e27496 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
#1 0x00002aec078ddeed in __db_pthread_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#2 0x00002aec078dda8b in __db_tas_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#3 0x00002aec0795b8f1 in __lock_get_internal () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#4 0x00002aec0795bc42 in __lock_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#5 0x00002aec07987d94 in __db_lget () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#6 0x00002aec07914625 in __ham_get_meta () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#7 0x00002aec07908d4b in __hamc_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#8 0x00002aec07979e8a in __dbc_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#9 0x00002aec0797aa0d in __dbc_pget () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#10 0x00002aec0798654b in __dbc_pget_pp () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#11 0x00002aec078d4dd7 in Dbc::get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
THREAD 5: Attempting to 'set' an asset.
(gdb) bt
#0 0x00002aec07e27496 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
#1 0x00002aec078ddeed in __db_pthread_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#2 0x00002aec078dda8b in __db_tas_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#3 0x00002aec079d0c45 in __seq_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#4 0x00002aec078dd02e in DbSequence::get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
THREAD 6: Attempting to 'set' an asset.
(gdb) bt
#0 0x00002aec07e27496 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
#1 0x00002aec078ddeed in __db_pthread_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#2 0x00002aec078dda8b in __db_tas_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#3 0x00002aec0795b8f1 in __lock_get_internal () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#4 0x00002aec0795bc42 in __lock_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#5 0x00002aec07987d94 in __db_lget () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#6 0x00002aec079893ee in __db_new () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#7 0x00002aec0798bb7e in __db_poff () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#8 0x00002aec07918eb3 in __ham_add_el () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#9 0x00002aec07907fe1 in __hamc_put () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#10 0x00002aec0797b6e5 in __dbc_put () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#11 0x00002aec0796ecde in __db_put () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#12 0x00002aec07985e6c in __db_put_pp () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#13 0x00002aec078d395c in Db::put () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
THREAD 7: Attempting to 'set' an asset.
(gdb) bt
#0 0x00002aec07e27496 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
#1 0x00002aec078ddeed in __db_pthread_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#2 0x00002aec078dda8b in __db_tas_mutex_lock () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#3 0x00002aec0795b8f1 in __lock_get_internal () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#4 0x00002aec0795bc42 in __lock_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#5 0x00002aec07987d94 in __db_lget () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#6 0x00002aec07915b6a in __ham_lock_bucket () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#7 0x00002aec07915dc7 in __ham_get_cpage () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#8 0x00002aec079075f9 in __ham_lookup () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#9 0x00002aec07908f9f in __hamc_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#10 0x00002aec07979e8a in __dbc_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#11 0x00002aec07984045 in __db_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#12 0x00002aec079d0374 in __seq_update () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#13 0x00002aec079d0c29 in __seq_get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
#14 0x00002aec078dd02e in DbSequence::get () from /usr/local/BerkeleyDB.4.7/lib/libdb_cxx-4.7.so
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Lock REGINFO information:
Lock Region type
5 Region ID
env/__db.005 Region name
0x2b8dbff65000 Original region address
0x2b8dbff65000 Region address
0x2b8dbff65138 Region primary address
0 Region maximum allocation
0 Region allocated
Region allocations: 225009 allocations, 0 failures, 0 frees, 1 longest
REGION_JOIN_OK Region flags
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Locks grouped by object:
Locker Mode Count Status ----------------- Object ---------------
808cfad0 READ 1 HELD db1 page 0
808cfad3 READ 2 HELD db1 page 0
808cfad5 READ 1 HELD db1 page 0
33 READ 1 HELD db1 handle 0
22 READ 1 HELD db2 handle 0
18 READ 1 HELD db3 handle 0
808cfad5 READ 1 HELD db1 page 3906
808cfad3 READ 1 HELD db1 page 6300
808cfad3 WRITE 1 HELD db1 page 6300
808cfad0 READ 1 HELD db1 page 8272
808cfabe WRITE 2 HELD db4 page 82387
808cfad3 WRITE 1 HELD db4 page 42879
808cfad3 WRITE 1 HELD db4 page 42878
808cfad3 WRITE 1 HELD db4 page 42877
808cfad3 WRITE 1 HELD db4 page 42874
808cfad3 WRITE 1 HELD db4 page 42873
808cfad3 WRITE 1 HELD db4 page 42872
808cfad3 WRITE 1 HELD db4 page 42901
808cfad3 WRITE 1 HELD db4 page 42897
808cfad3 WRITE 1 HELD db4 page 42882
808cfad3 WRITE 1 HELD db4 page 42881
808cfad3 WRITE 1 HELD db4 page 42880
808cfad3 WRITE 1 HELD db4 page 42894
808cfad3 WRITE 1 HELD db4 page 43797
1a READ 1 HELD db3sequence handle 0
1c READ 1 HELD db5 handle 0
20 READ 1 HELD db6 handle 0
24 READ 1 HELD db7 handle 0
808cfad3 READ 13 HELD db4 page 0
808cfabe READ 2 HELD db4 page 0
808cfabe WRITE 1 WAIT db4 page 0
808cfad5 READ 1 WAIT db4 page 0
26 READ 1 HELD db4 handle 0
808cfabe READ 2 HELD db4sequence page 0
808cfad0 READ 1 HELD db4sequence page 0
28 READ 1 HELD db4sequence handle 0
808cfabe READ 3 HELD db8 page 0
2a READ 1 HELD db8 handle 0
808cfabe READ 4 HELD db9 page 0
808cfad0 READ 1 HELD db9 page 0
808cfad3 READ 14 HELD db9 page 0
808cfad5 READ 1 HELD db9 page 0
808cfabe READ 1 HELD db4sequence page 2
808cfabe WRITE 1 HELD db4sequence page 2
808cfad0 READ 1 WAIT db4sequence page 2
2e READ 1 HELD db9 handle 0
808cfabe WRITE 2 HELD db9 page 1
808cfad3 READ 2 HELD db1sequence page 0
35 READ 1 HELD db1sequence handle 0
808cfad3 READ 1 HELD db1sequence page 2
808cfad3 WRITE 1 HELD db1sequence page 2
808cfad5 READ 1 HELD db9 page 2833
808cfad0 WRITE 1 HELD db9 page 7946
808cfad3 WRITE 14 HELD db9 page 8250
808cfabe WRITE 3 HELD db8 page 13301What else could be causing this in terms of the application having a resource locked? I can say that there are no other running threads doing anything related to BDB at all - they are all in similar "no work, sleep until we get some" calls, with the exception being the main thread which is sitting in sigwait(). What types of things could the application be doing that would prevent all 4 BDB threads from being able to obtain mutexes that are internal to them and not accessible to the application?
Other thoughts:
* On a fifth thread, from time to time, txn_checkpoint() is called. Could this have been left in an unclean state?
* If DB_RMW is used incorrectly, could lock order be compromised? We are not using CDS, so do we need to specify DB_WRITECURSOR to our db->cursor() calls? We do not; we only provide DB_RMW to pget() calls at present.
* Why is the thread attempting to call sequence->get also deadlocked? The sequence is in its own database - is it waiting on a more global "locker manager" mutex at a high level?
As I don't see how anything we do can directly control BDB's locking strategies, my only thought is that we're making a programming error to force BDB to lock things in an incorrect order in a way that prevents deadlock detection from occuring. Is this possible? Mainly the only thing changing here was our replacing DB_TXN_SNAPSHOT with the appropriate DB_RMW flags when needed, which is why I'm thinking we did something wrong here, but I'm not sure what.
I'll continue investigation, but any ideas you have in terms of appropriate directions would be helpful. I'll also work on reproducing this if I can by working backwards from the stack information. Thanks.
Later thought: Why is 808cfad3 not waiting on anything even though stack clearly shows it (thread 5, I'm guessing) in pthread_cond_wait? Can a transaction enter a wait state without showing up in db_stat output?
Thanks!
Edited by: user10542315 on Sep 11, 2009 1:21 PM
Edited by: user10542315 on Sep 11, 2009 2:52 PM -
REM Planning table - Capacity requirements and Levelling.
Hi i have few queries in REM planning table.
In REM planning table MF50 my selection is based on entire plant. Here in total capacity data tab for any particular plant it will show the list of work centers which are maintained in particular plant to know the capacity details as per our requirement.
1.When i select any WC line and click on change capacity display from CRP it is giving break up with required and available capacity hours for any particular WC available time is assume 22.5 hrs per day which is given in operating time in capacity header in WC but in MF50 it is showing 23hrs.I have defined shift sequence in OP4A and assigned in capacity header grouping which have 3 shift with 30 mins break in each shift which results in 22.5 hrs working for a day so in shift sequence and operating time it is mentioned as 22.5 hrs is the time available for day but in MF50 it is showing 23 hrs available for day?
2.What is due% in MF50 total capacity data for any work center and how required time would be calculated?
Appreciate if any one has any example.
Cheers
KKHi bump for any suggestions?
i have noticed one thing the time available is a round up value actual time available as per capacity header is 22.5 but in MF50 it is showing as 23..if i change to 21.5 then it is showing 22hrs available per day is this the standard behaviour?
can anyone tell me how the required time is calculated?
Cheers
KK -
Labview Crashes when adding case and sequence structures
I am running into a problem that I have never experienced before - when I am adding case and sequence structures to a version of code I am writing, Labview 6i crashes (i.e CPU allocation jumps to 95% on the task manager and hangs there) requiring an "end task". I am writing the code within XP Pro running on a 1.7 Ghz Pentium 4 machine with 512 MB.
The code is used to control valves and temperature controllers on a Noble gas analysis line and is fairly simple. There are multiple nested sequence (30 steps long) and case structures within a while loop. The code itself is around 1.9 MB, so given the speed and on-board memory of my machine I doubt that I am reaching and physical limit in terms of the memory or proce
ssing power required.
Has anyone ever seen something like this? Could the code have been corrupted by an email transfer? If so are there ways to recover? Any help would be greatly appreciated.Yes. At least to 6.0.2. Also, you might be able to fix the problem by doing a mass recompile of the directory that the vi resides in, this fixed a similar problem I had about a year ago. Just start Labview, but don't open any of the VIs in that program, then select Tools->Advanced->Mass Compile. I am not sure why it worked for me, but it did, I think it cleans up the code a bit.
Jon D
Certified LabVIEW Developer. -
PO line item details from BAPI_PO_GETDETAIL1 and append to BAPI_PO_CHANGE
Hi,
The requirement is to get PO line item details from BAPI_PO_GETDETAIL1 and save it in the internal table and append that internal table into the BAPI_PO_CHANGE.
But i am getting dump in this program.
TABLES: ekpo.
DATA: BEGIN OF po_details.
INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
data: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details like line of it_po_details.
data: it_po_details1 like standard table of po_details,
wa_po_details1 like line of it_po_details1.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '4500000016'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
PURCHASEORDER = p_ebeln
TABLES
POITEM = it_po_details.
loop at it_po_details into po_details.
read table it_po_details into wa_po_details with key PO_item = p_ebeln.
move-corresponding po_details to po_details1.
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
PURCHASEORDER = p_ebeln
TABLES
POITEM = it_po_details.
append po_details to it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
WRITE:/ wa_po_details1-PO_item,
wa_po_details1-MATERIAL,
wa_po_details1-SHORT_TEXT,
wa_po_details1-PLANT.
ENDLOOP.
endloop.HI,
1st you check for the following following authorization objects are checked:
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
and to change the PO below is the eg for changing the short text:-
TABLES: ekpo.
DATA: BEGIN OF po_details.
INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details LIKE LINE OF it_po_details.
DATA: it_po_details1 LIKE STANDARD TABLE OF po_details,
wa_po_details1 LIKE LINE OF it_po_details1,
poheader LIKE bapimepoheader,
return LIKE STANDARD TABLE OF bapiret2 WITH HEADER LINE,
poitemx LIKE STANDARD TABLE OF bapimepoitemx WITH HEADER LINE.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '5600010646'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
purchaseorder = p_ebeln
IMPORTING
poheader = poheader
TABLES
poitem = it_po_details.
LOOP AT it_po_details INTO po_details.
READ TABLE it_po_details INTO wa_po_details INDEX 1.
MOVE-CORRESPONDING po_details TO po_details1.
MOVE: po_details-po_item TO poitemx-po_item,
'X' TO poitemx-short_text.
APPEND poitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
purchaseorder = p_ebeln
poheader = poheader
TABLES
return = return[]
poitem = it_po_details[]
poitemx =
poitemx[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
APPEND po_details TO it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
WRITE:/ wa_po_details1-po_item,
wa_po_details1-material,
wa_po_details1-short_text,
wa_po_details1-plant.
ENDLOOP.
ENDLOOP. -
I didn't check the requirements and lost my older version of Firefox. All I have is an icon that is crossed out. Attempts to download an older version have so far failed. When trying to install, I am asked for an "application" to run the file.
There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
Presentation services and BI server stopped
Hi,
Presentation service and BI server stopped with the following error.
“The description for Event ID ( 21 ) in Source ( Oracle BI Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [47055] 30000 is too large for MAX_GLOBAL_CACHE_ENTRIES, and it is reset to default value, 10000..
Any suggestion on this..
Thankscan you provide more information. where did you find this description,in nqserver.log?
Also check your saw0.log.
Regards,
Sandeep -
Odi 11g functions and sequence
hello
what is the use of fucntions and sequence.
How do i create them in odi11g .
where in odi 11g is expression editor window available??User Function Editor
Use to define your customized functions.
User functions enable to define customized functions that can be used in interfaces or procedures. These functions are implemented in one or more technologies. They are usable in the interfaces and procedures.
A function can be created as a global function or in a project. In the first case, it is common to all projects, and in the second, it is attached to the project in which it is defined.
goto
Home > Designer Navigator Editors > Package Editor > User Function Editor
Sequence Editor
Use to define sequences.
A sequence is a variable that increments itself each time it is used. Between two uses, the value can be stored in the repository or managed within an external RDBMS table.
Oracle Data Integrator supports three types of sequences:
Standard sequences: the last value is stored in the repository.
Specific sequences: the last value is stored in an RDBMS table cell. Oracle Data Integrator undertakes to read the value, to lock the row (for concurrent updates) and to update the row after the last increment.
Native sequences: this type of sequence to a sequence defined in and managed by a database engine.
goto
Home > Designer Navigator Editors > Package Editor > Sequence Editor
There is no expression editor component directly in any tree of the odi components.
You can find expression editor where you can write expressions.
For example writing filter expressions in a mapping, writing procedure commands etc
for more details please visit www.odiguru.com
Thanks Guru
Ram Kumar Lanke
www.odiguru.com -
Urgent --2 BIEE presentation Services and One BI Server in Linux
Is it Possible to Have 2 BIEE presentation Services and One BI Server, so one BIEE Presentation Server access 1.rpd and another will access 2.rpd to create Report design.
Basically my requirement is at a time 2 developers need to create reports with 2 different. RPDs in the same environment with by 2 diff URLs.
This Situation is in Linux platform.
So in this Situation what NQSConfig.ini will contain?
And how many OracleBIData Folders will create and how many Instanceconfig.xml files create?
If possible please can you please share any documentation related to this?Excellent discourse! I must say, this is a great example of what "forum" really means: a place where posters can point and counterpoint an idea in the arena of all Oracle "onlookers" where each can determine the best course of action for IN ('himself', 'herself') based on the evidence provided. Everyone benefits when a poster can document where IN ('he', 'she') derived IN ('his','her') opinion so others can test and verfiy.
In the vein of "Whose Line is it, Anyway?" ala Drew Carey: "Thousand points to Turribeach and Giorgio!"
(Seriously, though, user650397, you should award points to these two as valuable information was discusssed and whether you choose Giorgio's suggestion or Turribeach's, both ideas were "helpful" at the least, because without both sides, you would not have known that there are more than one option.)
P.S. I agree with what Turribeach said. We also chose the route he did.
P.P.S. To user650397: Change your username to something more mnemonic. I had to go back to the thread just to remember what number followed "user." -
Client requirement and questionery for fico
Dear sap Guru's
Any good hints or tips for FICO implementation in Malaysia?* am very fresher and first time am going to do implementation, plz guide.................
how to prepare a client requirement and questionery. plz help.............
tks
RoniTo add few more info..
*1) How we can integrate the client app and OSB service?*
Using event, like you can have a button in your client app, whenever you want to post the payload.
Click on the button and post the payload your OSB proxy will receive it and pass on to BPEL process.
*2) How to integrate the OSB service and BPEL process?*
You use direct binding or use http soap call to access BPEL from OSB.
*3) Whether the BPEL process needs to be a Webservice with WSDL exposed to OSB proxy service?*
Yes, it will be soap over http.
*4) BPEL how will it validate the employee details and store it in Oracle DB, how it will connect to the Oracle DB?*
Whether this is done through XQuery, XSTL? or plain java code with JDBC connection?
As said before you can keep it with DBAdapter.
I have few questions for you.
*1. What is the significance of using OSB and BPEL in your architecture?*
If you want to have better performanc, you can just use OSB without using BPEL.
OSB with DB adapter will do the job for you.
*2. Are you going to use just insert statement with your Database ?*
If yes, just go for DB adapter, or if you have to run logic, you can keep those logic inside a procedure and expose as procedure to bpel.
So that performance will be more.
- It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay -
How to create OS Requirements and Primary Devices Requirements
C# code to create OS Requirements and Primary Devices Requirements
Hi，
I'm not quite sure about this issue. Could you please provide more details?
Here are some documents for your reference.
System Center 2012 R2 Configuration Manager SDK
http://msdn.microsoft.com/en-us/LIBRARY/hh948960.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Conversion issue with the French version of Presenter 9 and 10
Anterior versions worked fine
The problems described here arise on different PC (windows 7)
Some "objects" (images, graphics...) in the ppt wont show up in the Presenter document
Sentences and even words are cut : the first part is shown on a line and the other part on a second line
We tried the "shadow 1%" fix but without any success.
Those problems can arise even in a previously "normal" Presenter document !
For example :1) Slide 4 of a Presenter document X is ok. 2) We make a modification in the slide 2 of the ppt x 3) then publish in presenter. 4) we realize that slide 4 lay-out is no longer normal !!!Unfortunately, I need to report back that this didn’t resolve the issue. On my presenter, the editor still jumps over the slide with the logos. As said earlier, it shows the slide for line 0,2 seconds and then moves to the next.
Also, for the record, I have many slides with only 7 objects (2 pics and 5 text fields) which have the same effect in some other presentations.
Please advice.
Best regards,
Matti Heikkonen
SEVP, Global Operations
QuestBack AS
Mob +47 47 922 170
[email protected] -
Hello
I Installed oMovie on my new Mac Mini OS X Server edition in order to run comlicated and long movie calculatons with a huge amount of source data, that I do not want to keep on my MacBook Pro. But upon strating Imovie its shows me the message "Quarz Extreme required" and quits. Mac Book Pro works with Imovue Perfectly, but I do not want to waste hard drive for huge amounts of source data. I'm working with server through screen sharing on my MacBook.
Who can help me with this issue, Please!!!
Thanks
OlegHi - No I don't know - But I supply my list of trouble shootings - May be You find help here - Else it needs more to be complete.
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W
Maybe you are looking for
-
How to connect Cinema Display A1081 to Mac Mini 2009
This may seem an obvious question but the problem is that I am currently abroad, having bought a Mac Mini to replace my very old PowerMac G4, so I cant check if the cable that currently connects the old machine to my Cinema Display will also fit into
-
if you get i pad 2 with out 3g installed in it can you add it externally by an adapter later on to use it att or othe rcarrier or you have to sell it and buy one that has a 3g instatted on it
-
When I sign into my email account I am brought to the "Email Preview" page. When I click on "email", "address book" or any of the other files, it tries to connect. In the box at the top it says "connect, then Zimbra, then connect again. Then I am bro
-
Acrobat 9 Standard Trial Download
I have been able to download the trial version 9 Pro and have done my testing, but I've not been able to find and download a trial version of Acrobat 9 Standard. I'm guessing it is not available for trial, can anyone confirm please? Thanks, Jeffrey
-
Cert issue with Java 1.7 vs Java 1.6?
As part of our Java Update process, I've been updating the Java version that our ColdFusion servers (9.0.1 Cumulative Hotfix 4) use from Java 1.6_xx to 1.7_17. Overall, no issues, except- when trying to connect to a couple of internal servers via cfh