P4515N top output bin question

We are in need of a printer that can output between 1000-1500 pages unattended. We got recommended the P4515N but I am still not convinced the top output bin can hold the 1500 pages. Documentation says output bin max is 600 pages. I just want to make sure the sheets will not be flying over the place. Can someone shed light on this?
Thanks in advance.
Message Edited by CyberGuyPR on 08-13-2009 12:26 PM

Hi,
Assuming that you are using the Java API then you can use the method here to get the XMLDocument class
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#ADXDK070
and then use the capabilities of DOM to strip off the XML declaration, e.g. with getDocumentElement()
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14293/toc.htm
hope this helps
Susan

Similar Messages

  • 9050 driver output bin option

    We have multiple HP Laser Jet 9050's in our building.  I cannot seem to make them print to the left side included accessory output bin with any of the 9050 drivers (5e, 6)  I have not tried the PS.  With these drivers, I get options that do not make sense.  In the printer properties the options for enabling the side output bin are not installed, several multibin mailbox options, 2 3000 sheet stackers and HP multifunction finisher.  I have tried both  3000 sheet option and the multifunction finisher.  Then in the output tab of the options page, lower left bin and upper left bin (Note: there is only one bin)
    On the 8150's This worked like a charm.  I was able to put selected users to the side tray relieving congestion.  Note: I can use the 8150 drivers but do not think I should.  There have been multiple questions on the HP site on this issue but no one has adequately answered it.

    L_G,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Printing to a Specific Output Bin

    I have been asked to setup an output queue in SAP where all output to that printer goes to a specfic (non-default) output bin on the printer. The printer is a HP 8050 multi-function printer with 5 different output bins. I have determined the PJL and PCL codes to direct the output. My problem is that the output will both be ABAP lists and SAPSCRIPT data so I do not want to start changing specific forms or printer formats. How do I modify the printer device so that all output goes to the proper bin?

    Thanks for your reply.  I had previously tried the option in SPAD but had no luck. In my research I turned on logging with the test tool in SPAD and captured the PCL code generated. I am not seeing the code being sent from SAP which specifies the output bin destination. I looked for both the PJL code(set outbin=) and the PCL code (esc&l5G) for bin 5. I am running ECC 6. Are there any known issues with this tray option?

  • Printer shows paper jamming in output bin but no paper visible in 2605dn

    printer shows paper jam in output bin---have reset and cleared everything---still shows same.  What now?

    In case you missed something, see this:
    http://h20564.www2.hp.com/hpsc/doc/public/display?​docId=emr_na-c00783950
    Try a NVRAM reset: (but make sure u save your n/w config 1st)
    1. power off the printer
    2. holding down the select and cancel buttons and powering on
    3. release buttons when display reads "permanent storage init"
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Laserjet printer p2050 says"output bin is full remove all paper from bin"

    Printer will only print 1 or 2 times then I get the error message.  I have to pull open the paper drawer & slam it closed to get it printing again

    Hi Sharon453,
    When you get this error message, do the flaps in the output bin stay up?  And does the action of slamming the paper tray shut cause these flaps to fall?  It sounds like there may be something sticking that is causing the sensor to think the output bin is full.
    I work for HP

  • Printer output bin

    Hi,
    we have a printer with multiple output bins. So i want to control the output bin, when i'm printing from any application within the sap system.
    How can i do this? I tried to control this with various default settings on the printserver, but this won't work. Do i have to modify print controls?
    Is there any chance to do this?
    Thanks ahead.

    Hi ,
    Can u try with this .,
    1.     Log on to any client in the appropriate SAP system.
    2.     Go to transaction SPAD.
    3.     On the Spool Administration: Initial Screen screen, under the Devices\servers tab click the Output devices button.  On the Spool Administration: List of Output Devices screen, click on the printer where you need to check the output requests.  Then click on the printer and page picture-icon.
    4.     A list of all pending output requests for the selected printer will be displayed.
    PS :reward point if it is useful
    regards,
    S.rajeshkumar

  • Is there ANY way to have a static widget over the top of a question slide?

    I have a popup reference widget that I made and put it in a master slide and set it to ply on top, BUT if I add it to a question slide, the text from the question shows over it.
    Any way to have a widget always be on the absolute top?
    Click on the MSDS tab at bottom reveals popup, but the question text appears over the widget even though it is in a master slide set to shop on top.
    Ideas?

    Once your widget is on the slide, it has complete control over the display tree. So what you can do is to move up the parent hierarchy until you find the slide (parent.parent.parent) and then re-parent yourselft or you popup window on top of the hierarchy by just calling addChild(). That works well for the static widgets. You just need to deal with the position being different on the slide so you'll have to juggle with localToGlobal() and globalToLocal().
    Whyves
    www.flash-factor.com

  • Oracle Reports 10.1.2.3 output shows question marks, parameter form shows correct Arabic

    Hi
    Following is our environment
    Oracle Application Server     10.1.2.3.0
    Microsoft Windows 2003 Enterprise Edition Service Pack 2
    Oracle Database 11.2.0.2.0
    NLS_LANG     AMERICAN_AMERICA.AR8MSWIN1256
    When client runs the report on browser (IE), the parameter form appears fine with Arabic characters.
    Inserting the parameters in Arabic also look fine and characters display in Arabic but when report is generated, the output shows the inserted parameters as ????
    On server, regional settings are ALL Arabic. Also the registry has NLS_LANG setting of AMERICAN_AMERICA.AR8MSWIN1256.
    Report output is same for both html and pdf formats. For PDF subetting, uifont.ali file has been modified but the issue does not seem to be PDF related since the html format reports also shows ???
    It is a 3 tier setup hence there is no question of having NLS_LANG registry settings for client PCs that are running Windows OS with Arabic regional settings that match the server.
    Interestingly, the same report when run from a different application server having same architecture runs fine. The other application server has exact same version of OAS. Database supports Arabic and is configured as such.I tried comparing the different configuration files on both servers but apparently I cannot find the place where I should change something for the reports to show correct Arabic.
    SELECT * FROM NLS_PARAMETERS
    WHERE parameter IN ('NLS_CHARACTERSET','NLS_LANGUAGE');
    NLS_LANGUAGE
    AMERICAN
    NLS_CHARACTERSET
    AR8MSWIN1256
    I am writing this after doing quite some research but seems like I am unable to find a solution to this.
    Any help will be appreciated.

    Thank you Paul for your reply.
    I think you misunderstood me. I understand that it is all volunteer work and I never said I was looking for "quick" or "sure" response. I did not even use the words IMMEDIATE or URGENT in my post. I found it strange because I personally believe that there are many volunteers providing great support to others and yet my post somehow went unnoticed. In my personal opinion, however, if you do not wish to reply then you should just ignore rather than being rude. No one can force anyone to do the good work that people are doing here at oracle forums and they are all doing this out of choice. Let me also assure you that me and people like myself really appreciate their efforts.
    Having said that, I wish you had taken time to read about my issue. There is infact a registry setting that specifies the NLS_LANG and it is already set under both Infrastructure and Middle Tier in the registry. I mentioned it earlier. The value is AMERICAN_AMERICA.AR8MSWIN1256 and I believe this is correct for Arabic characters.
    What is confusing for me is the fact that if browser was not capable of showing Arabic characters then the static Arabic words in the reports layout (field name for instance) would also show as garbage or question marks. They appear to be fine. Since we are just passing some parameters in Arabic language and not saving anything in the database, the DB characterset does not come into play for now. Although the DB characterset is also set to store Arabic data. We are displaying the parameters that we are passing through the parameter form in the output of the report and this is where we see question marks (????).
    Finally, if it was a browser issue or a DB characterset issue, then in my limited knowledge, I believe that the report that we are running using the other Application Server that is pointing to the same database should also show the same behaviour. That is not the case as it displays the same report perfectly. Client machine is the same in both cases using Windows 7 and IE as browser.
    http://appserver1/reports/rwservlet?admin/myreport           (connecting to db1)    works fine
    http://appserver2/reports/rwservlet?admin/myreport          (connecting to db1)     show question marks
    Above URLs are examples. The point I am trying to make here is that the issue has to be with the new application server and it cannot be registry settings as I have double checked the entry and it exists in all Oracle Homes ie Infrastructure and Middle Tier. So maybe it is some configuration file setting that I am missing here.
    Any help will be appreciated.

  • Handling unit output determination questions

    I have configured a new output type for a custom label we need to implement for handling units.   It is assigned as V6, for Ship-to Party/Shipping Material.
    In VL01N or VL02N, I am able to create the handling units and pack the delivery line item materials into them.
    I am able to manually assign the output type to the handling unit in VL01N/VL02N, but have not been successful in getting the output type to auto populate.  I have verified that it is not populated after packing the HU and saving from VL01N, or when doing from VL02N, or after PGI.
    I have been searching the forums and have not found the answers I need.
    1.  Is it possible for the output type to automatically populate for a handling unit?  If so, at what point should this happen?  I would think based on how our custom label output types for delivery documents behave, it would assign after save from either VL01N or VL02N.
    2.  When I create the HU, I specify a VERP packaging material number that represents the carton in order to create the HU.  I do not have the material on the sales order or delivery as a line-item, and I am not getting any error messages indicating that it should be. 
    If this should work the way we expect it to, any suggestions on what I have overlooked that would prevent my output type from automatically assigning?
    Thanks in advance for your help.
    Dave

    Hi Joan,
    Thank you for your answers.  They were most helpful.  I was finally able to get the new Output Type to assign after I created the HU's and saved the delivery.
    Hopefully you won't mind if I ask some related questions.
    1.  If I went to VL02N for a delivery where I had already created the handling unit, it did not automatically get the Output Type assigned when I saved.  (Like it does for our delivery based labels when I add a user in NACE that previously wasn't identified to get the label.)   Is this the normal behavior for HU-based output or am I still missing something in my setup?
    2. I did the VHAR step and specified both the Output Determination Procedure and the Output Type of my new label,as suggested.   This did work once I finally tested by creating a new HU for a delivery, rather than checking an existing delivery/HU.  Is entering the Output Type here critical?  If another customer has a different label format, I think assigning the Output Type here this will cause a problem for us.  (I haven't had a chance to change the config to remove this and see if the Output assigns based on references elsewhere, now that I know it seems to assign only when the HU is initially created.)
    Thanks again!
    Dave

  • PID VI - Output Range Question

    I have a question concerning the PID VI and it's output range option.
    "What is gained or lost from using 0-100 versus -100 to 100 for a default output range?"
    My application:
     My application provides the PID VI a setpoint and a process variable, both in degrees Celsius. I see that the output from the VI has a default range of -100 to 100. The power supply that I want to power accepts an input range of 0.0035 - 0.020 mV.
    If I simply enter that range into the VI, the output is either zero or 0.020.
    I can get other values if I use the larger scale and then convert them to the smaller numbers. I am trying to decide between using the range 0 - 100 or going with the default range of -100 to 100 and simply cutting off anything below zero in the conversion to mV. What is gained or lost from using 0-100 versus -100 to 100 for a default output range?
    Thank you
    -Ron

    Here is an example of the four situations.
    Thank you,
    -Ron
    Attachments:
    PID Single.vi ‏129 KB

  • Output Settings Question

    Which I'm sure has been written tons of times problem is I can't find any info I need on it except for settings when rendering small files like intros maybe 5 to 10 seconds.
    I have to do a set of animations that require text, images and efects. Nothing crazy, pretty conservative. I saved the file in Premiere with an 800 x 600  ratio. first I need to saved the file in it's entirety which is almost 900mbs , looks and plays great. Now I will need to optimize this file for either You Tube or an flv. I know I will have to split the files into sections or chapters so there are lets say 8 chapters and the fie is almost 55 minutes so figure an even hour so lets say 8 minutes each. Is this still too much time?
    Regardless I just took 5 minutes of finished footage and rendered it in Quicktime, I need to figure out a good aspect ratio like 480 x 360 for You Tube or Flash?
    any help?
    rd

    Well, AME includes a preset specifically for YouTube, though I've seen reports of it not working very well or giving less-than-stellar results.
    I've developed several encoding algorithms for H.264 that seem to work very well for YouTube video. I've attached screenshots of the one for my SD footage and the one for my HD footage (note the very different finished file sizes). They both give very good results, and the HD version is true 720p HD. I've also got a couple of mid-range encoding algorithms, and if you'd like to see them I'll post them as well. Obviously you may need to adjust your frame size to match your timeline, or you can just use what I've got here and have bars on the top/bottom or sides. (FWIW, the HD version is a direct copy from what Vimeo recommends for their Plus users to use for HD uploads). For both of these, set your multiplexing to .mp4 and "Standard" or "iPod." Audio is 32 bit, 48kHz, 128kbps, AAC, though you could adjust that however you wish. Here's an example of the output of the HD version. Shot with a JVC GY-HM700u at 1920x1080 30p mixed with a small AVCHD camcorder at 1920x1080 60i.

  • Sequence and Output Settings Question

    Hello all,
    I'm know this is a rookie question, but it's often hard to find a definitive answer to these types of things.
    Here's my specific situation:
    99% of my final output will be SD NTSC DVD-progressive for corporate shows, and I create almost all of my own content, or use stock animations from companies like Digital Juice. Rarely do I ever deal with DV captured from tape.
    Given the final output, and given that my generated media can be basically whatever codec I want, what's the best sequence settings to use in FCP, and the best way to output it for nice, crisp, progressive DVD playback?
    Thanks!
    SyddyS

    Mac Pro 2x3.0 Dual, 4GB Memory, ATI Radeon 1900
    Also, on another note, I'm currently in a REALLY rare situation for me where I'm recording to DV tape. Everything looks great except for all titling created by FCP. Does FCP titling just suck? Anything in red or green hues has vertical lines running through it.
    Thanks!
    SyddyS

  • Output type question

    Hi Friends,
    I need your help. Currently I need to analyse what are the output types for print output and fax on production. I did that and I noticed that the Output type is NEU for both the mediums, i.e Print output and Fax.
    My questions is if NEU is the o/p type for both, then how do we differentiate that a supplier should be only faxed, or only emailed, or both ?? What setting/ config could it be ?
    Your ideas will be appreciated.
    Many Thanks,
    Max

    @ kalyan Gorla -
    Sorry but this is not what I am looking for. Let me explain once again.
    I have a production system right now in which NEU is being used for both Print and Fax at the same time. i want to know how are these both being used at the same time. for example, I have a purchase order with 2 output types in the message tab. i.e NEU with print and NEU with fax. Now in our project we want to use this NEU but the business requirement is to just send a  print and not fax by using NEU to the suppliuer. So I want to understand how are 2 NEUs being used at the same time.

  • Vbscript for sending output of question by emails

    Hi,
    I need a script that will have several questions , and i want to take the answers and send it by email(using outlook software) in the body and not with file attached .
    I got a script to the questions and answers , and i have the script of sending an email with outlook , i just dont know how to link the output to the body.
    here are the example i own (suggestions and adjustments will be welcomed):
    script for the mail :
       Set objOutlook = CreateObject("Outlook.Application")
       Set objMail = objOutlook.CreateItem(0)
       objMail.Display   'To display message
       objMail.Recipients.Add ("*****@****.**.**")
       objMail.Subject = "Mail Subject"
       objMail.Body = "This is Email Body"
       objMail.Send
       Set objMail = Nothing
       Set objOutlook = Nothing
    script 1 for q/a :
    Const ForReading = 1, ForWriting = 2, ForAppending = 8, CreateIfNeeded = true
    set fso = CreateObject("Scripting.FileSystemObject")
    set file = fso.OpenTextFile("output.txt", ForAppending, CreateIfNeeded)
    dim fname
    fname = inputbox("Hi! What's your name?")
    dim fname2
    fname2 = inputbox("And what is your job ?")
    file.write fname
    file.write fname2
    file.close
    script2 for q/a :
      ' Input Box with a Title
      a=InputBox("question1","Enter Value")
      msgbox a
      ' Input Box with a Title
      a=InputBox("question2","Enter Value")
      msgbox a
      ' Input Box with a Title
      a=InputBox("question3","Enter Value")
      msgbox a
      ' Input Box with a Title
      a=InputBox("question4","Enter Value")
      msgbox a
      ' Input Box with a Title
      a=InputBox("question?","Enter Value")
      msgbox a

    Here you go:
    'Input Box with a Title
    sText = InputBox("question1","Enter Value") & vbCrLf
    'Input Box with a Title
    sText = sText & InputBox("question2","Enter Value") & vbCrLf
    etc.
    Now put your E-Mail code here, including this line:
    objMail.Body = sText

  • Flash Output Format Question

    I did a search on this in the forum and looked thru google
    but there doesn't seem to be an answer anywhere, even though I'm
    sure there is one. I've made a flash animation movie with Adobe
    Flash and I'd like to upload it to youtube. The problem is, youtube
    doesn't accept SWF format. I tried to use my Total Video Converter
    to convert my SWF file to mpg, but the converter can't read it. So,
    I published a Quicktime .mov of my movie in Flash 8. But Youtube
    couldn't read my published .mov. I then tried to put that .mov into
    my converter but it still couldn't read it. So, I then tried to use
    the Adobe Flash Encoder; it doesn't seem to read SWF. So, I used it
    to convert my .mov into an FLV, hoping that I could then convert
    the FLV to mpg. All that got me was a totally blank video.
    I'm sure there's an answer to this, as Youtube is full of
    people's flash animations, but I just can't figure it out.
    Please, how do you format a flash video created in Adobe
    Flash CS3 for upload to sites such as Youtube?
    I'd really appreciate any help. Thanks.

    Rex Ross wrote:
    So, my question is this:
    If one were to run Compressor to create  a file which is suitable for upload to Vimeo and for use on an Apple TV 3, it appears as if any of these pre-sets would be suitable.
    Well, Vimeo will take just about anything you feel like uploading, so you're more or less correct on that score. They recompress the file, no matter what you give them. If you over-shoot their ideal format  – by giving them a lot more data then they need, the excess data will get tossed out when they re-compress. Beyond a certain data rate, it doesn't seem to make a difference although there are people who upload files @ 25 Mbs and even higher. Of course, the reverse is not true; if you give them a 1080p file @ 2 Mbps, you probably won't be pleased.
    There are some differences. The video sharing preset produces a Quick Time .mov. The two Apple device output files are MP4 with the iTunes extension of m4v. I'VE never tried to upload an MP4 with that extension, but it would probably work. If Vimeo (or YT)  balked, it would be easy enough to change the extension to mp4. Another difference is the audio streams; a 48 KHz sample rate for the mov and 44.kHz1 for the MP4.
    I'm pretty sure that a mov file will play on ATV. But I'm also pretty sure that it would not play on an iPad.
    That they are all variations on the h.264 codec is not surprising since it's highly efficient at delivering good quality in small file sizes.
    Russ

Maybe you are looking for