Partials Confirmations - QTY's not getting picked automatically

We are facing issues, where we are doing confirmations partially. Intial confirmations
are done for a set of quantities followed by confirmations for remaining quantities for that
production order. The problem is system is not picking the remaining quanities automatically
We are plugging in remaining quantities manually before doing confirmations
Is there a configuration setting, where we can popluate the remaining quantities automatically
Transaction Used: CO11n
Client: ECC 6.0
AFS Implementation

Thanks for your replies
The given setting was already maintained, but still system was not populating the remaining qty's
more appropriate way is to, change the quantities in the intial front screen of  CO11n, rather than
changing the quantities inside CO11n (click through goods movement tab)
By changing the Qty's in the intial screen of CO11n, helps in populating the remaining  quantities
during next partial confirmations
Due points have been assigned

Similar Messages

  • CESS and VAT not getting picked automatically in Sales Order and Quotation

    Hi Experts,
    Whenever we create quotation or sales order the Excise Duty, Cess and VAT/CST has to pickup automatically but it is not happening.Sold to party belongs to TN and Karnataka states are picking up properly but not other states.
    Regards
    Rajeshwari Shenoy

    Check if Condition record are maintained, so that it is picked in Sales order. When it is working fine for TN & Karnataka, it is most likely that condition record is not maintained.
    Regards,
    Rajesh Banka
    Reward points if helpful

  • CST is not getting picked up in sales order

    Dear Experts,
    We are following TAXINN procedure and we have maintained condition record for excise condition type - JEXP, JECS & JA1X and tax condition types - JIVC and JIVP. But in sales order, Excise condition types and Vat is getting picked automatically for local customer. But if I chose a CST customer CST is not getting picked automatically even though I have maintained condition record for the same. I have told my client to use alternative tax classification but my client doesnt want to follow this procedure.
    Kindly let me know, how can I make the CST to  be picked automatically in sales order.
    Thanks & Regards,
    Reji S

    Dear Reji,
    These may be the possible areas for the issue.
    1.Check the ship to party Tax classification in the customer master>Sales area data>billing tab.
    2.Check the Tax classification of the material master-->Sales org data view.
    3.Check the region of the ship to party.
    I hope this will help you,
    Regards,
    Murali.

  • Overdelivery tolerance- confirm quantity (allocation) not getting updated

    Hi All
        I have a strange problem......could this be a gap with the SAP program
    I am using over and under delivery tolerance (say 10%)  in the customer master - sales - shipping tab. Now i create a order with
    Order qty          1100
    confirmed qty   1100
    delivery qty      1200      (since we have maintained 10 % over delivery tolerance)
    Now i want to update the order to 1200 for two reasons
    1) to keep the order in sync with delivery
    2) to update the allocations (this is because we have Allocation activated and not ATP at schedule line level)
    So when i go into the order and update the line to 1200 the following happens
    Order qty             1200 
    confirmed qty      1100   (not updated)
    delivery qty         1200       
    So my confirm qty is not getting updated to 1200 and hence my allocation tables are not getting updated. The same is getting updated when we have ATP at schedule line level. Could this be a gap with SAP that i dosent update allocations in this scenario.
    The reason it dosent confirm is that it assumes that the delivery is completed and since we have tolerance maintained it assumed to be a good scenario.
    Please help.
    Vikas
    Edited by: Vikas BhumiReddy on Oct 28, 2009 5:27 PM

    I am also facing the same issue. Have you found out any solution regarding this.

  • Output Message Type MAHN not getting picked up in PO

    Hello Experts
       I have configured customized output type ZMAH (similar to MAHN) for reminder process. When I am creating PO this output type is not getting picked up automatically. If I am maintaining it manually I am able to send message for ME9F (Purchase Order) and ME91F (Reminder) successfully. Upon deremination analysis I am getting this message 502 " Output ignored (requirement 103 not fulfilled) ". Reminder are getting picked up from Purchase Value Key to PO.
    Any help is appreciated.
    Thanks
    Ankit

    Hello Tej
      I have maintained output device but same result.
    Here I am listing all parameters that I have used for configuration can anyone please take a look and let me know if I am missing anything
    Steps for new Message Type for PO Reminder (ZMAH)
    1.     Defined new Table 026 Purchasing Output Determination: Document Type
                                                        (ii) 027 Purchasing Output Determination: Purch. Org./Vendor for EDI
    2.     Defined new access sequence Z515 Access Sequence for Archiving.
    Following are parameters to the Access Sequence
    Access Sequence Number = 1
    Table = 026
    Description = Purchasing Output Determination: Document Type
    Requirement = 103
    Exclusive = Yes (box checked)
    Access Sequence Number = 2
    Table = 027
    Description = Purchasing Output Determination: Purch. Org./Vendor for EDI
    Requirement = 103
    Exclusive = Yes (box checked)
    3.     Maintain Output Type ZMAH for PO
    General Data
    Access Sequence = Z515
    Access to condition (Checked)
    Multiple Issuing (Checked)
    Change Output
    Program = SAPFM06P
    FORM Routine = ENTRY_NEU
    Replacement of Text Symbol
    Program = SAPMM06E
    FORM Routine = TEXT_SYMBOL_REPLACE
    Default Values
    Dispatch Time = Send Immediately (when saving application)
    Transmission Medium = External Send
    Communication Strategy = 0001 (E-mail Document)
    Processing Routines
    Transmission Medium = 5 (External Send)
    Program = SAPFM06P
    Form Routine = ENTRY_NEU
    Form = MEDRUCK
    Partner Roles
    Medium = External Send
    Funct = VN
    Name = Vendor
    4.     Fine-Tuned Control: Purchase Order
    Oprat. = 3
    CType = ZMAH
    Name = Output for Reminder
    Short Text = Urging letter (expediter)/reminder
    Update Print Related Data = Yes (checked)
    5.     Maintain Message Determination Schema: Purchase Order
    Procedure RMBEF1 (Purchase Order)
    Step = 101
    Cntr = 3
    CTyp = ZMAH
    Description = Output for Reminder
    Requirement = 103
    6.     Assign Schema to Purchase Order
    Procedure RMBEF1
    7.     Define Partner Roles for Purchase Order
    Out. = ZMAH
    Med = 5 (External Send)
    Funct = VN
    Name = Output for Reminder
    Name = Vendor
    8.     Test Condition Maintained in MN04 (Master Data)
    Purch. Org. = 0001
    Vendor = 101281
    Partner Funct = VN
    Medium = 5 (External Send)
    Date/Time = 4 Send immediately (when saving application)
    Output Device = LP01
    Cover Page Text = Reminder PO number &EKKO-EBELN&
    Also I have configured Purchasing Value Key, reminders are coming to PO correctly.
    Thanks
    Ankit

  • Debit Items not getting picked while making payment with F110

    HI,
    When making payment with F110, items with Debit balance is not getting picked.
    Example:
    Payment method is assigned in the Maser data.
    For a particular vendor one item has a credit balance- posting key 31.
    We have posted another JV with F-02 and debited that vendor with Posting key 21. (Payment Method is not entered in the line item)
    When we run F110 the credit balance is picked and debit balance is being shown in exception list.
    When we got to FB02 and insert payment method in debit line item and then again run the F110 then system pickes all line items and pays the net amount.
    The question is why system is not considering Payment Method from Master Data in debit  line item, while in credit line item it is picking payment method from the master data.
    Do I need to do any setting for it so that it should automatically take payment method from master data even in case of Debit line items.
    Regards
    Sanjay

    Hi All,
    Thanks for your quick replies.
    But it does not solve my problem.
    When I am not assigning any payment method to either Debit or credit line items, system picks (payment method from Master data) for only credit line items and ignores debit line items.
    But the problem is that when I assign payment method to debit line item (which is similar to what has been assigned to vendor Master Data) system groups both debit and credit line items and makes payment of only net amount.
    My question was why system considered the debit line item for making payment if I manually enter payment method in the line item, if system has been designed only for out going payment. In my opinion It should have reacted similarly irrespective of whether payment method entered in the line item or not.
    Regards
    Sanjay

  • Items not getting picked up in Return sales order

    Dear all,
    I am creating a return sales order with reference to a sales order.
    In my delivery doc the items can be categorised into 3 types:
    1- Picking done; Movement type determined
    2- Picking done; Movement type not determined
    3- Picking not-done; Movement type determined
    In the return order, only the items of 1st type are coming. Why others not getting picked up? Can they be entered manually?
    regards
    Sapshed

    Dear Hrishikesh,
    Thats Ok. Picking is done only for those items for which Relevant for Picking is ticked.
    What I want to know is that, for items that have either their picking not done or Goods movement not determined, they are not getting automatically picked up while I create a Return order w/r to a sales order.
    thanks
    Sapshed

  • File not getting picked.

    If a file is not getting picked
    where can be issue...what is the first thing we should do....
    what is the exact location we should go...
    Harsha

    Hi Harsha,
    As your FTP is not picking up the file , you can please try out the following.
    1. Kindly check whether you are able to ping your server.
    2. Check whether you have correctly entered the name of your source folder in the sender communication channel.
    3. Also confirm the name of the file you are trying to send is same as mentioned in the sender channel.
    4. Check the user credentils ,i.e. you have entered the correct id and password in the sender communication channel.
    5. Please check the permissions of the the source folder i.e. they should be "write / read " with read atleast.
    If you are still facing the same problem ,kindly revert.
    Kindly reward the points if you find this reply has helped you solve / analyzed your problem.
    Regards,
    Vishal

  • Partner not getting picked

    Hi All,
    We have the below scenario which is not happening as expected.
    We have the Partner Function ZS and ZG which is assigned to the respective Account Groups. ZS is the sourse for ZG. We have done the config for the Partner Function in such a way that we will enter ZS manually and corresponding ZG should get populated in the Order.
    How ever, when we enter the Partner ZS, ZG is not getting pciked automatically. System accepts when we enter ZG manually.Also, If we create an order with reference to an Order which has got both ZS and ZG, the Partner Function ZG gets picked automatically. The config for Sourse and assignments are correct.
    Request your input.
    Thanks,
    Renjith

    Hi
    this is to inform you that
    please chec this user exit for partner control MV45AFZZ USEREXIT_MOVE_FIELD_TO_VBD
    please sit with an ABAPER and you can achieve it by writing some small piece of code to change partner control.
    please chec and update the forum.
    balajia

  • EXW price is not getting picked up during preference determination

    HI .. all,
    We have transferred Sales order from ECC to GTS. But during prreferrence determination, EXW price of the Sales order is not getting picked up.
    Please suggest if any configuration is missing .
    Thnks in Advance .

    Hi Sapcongts,
    Of course you should not modify standard SAP code, and I will not help you to do that.
    I don't agree with your idea of proposed and actual EXW values.  The Sales Order is your way of recording the customer's Purchase Order, and the price should be fixed at that point.  The billing process should not change the agreed price of the goods - only perhaps re-calculate taxes and any other charges that could not be confirmed at the time of order.
    If your standard prices are offered as FOB, then I can understand your needing to subtract some components to reach the EXW price, but in that case you will have problems transferring the correct amount to GTS.  As I mentioned earlier, you can manipulate the data in the BAdI /SAPSLL/IFEX_SD0A_R3, but I had not looked closely enough at this specific requirement.  Unfortunately the pricing table KONV is not provided in the BAdI and that data will not yet be available in the database.  Provided the elements to be subtracted are to be read from Master Data, then you could make that same subtraction again in the BAdI.  But if there are complex dependencies, it might not be easy.
    Having looked in more detail at the code, I think you would be reasonably entitled to complain to SAP about missing functionality here.  In the ERP system, the SD pricing provides a specific sub-total (KOMP-PREVA: subtotal 8) for Preference Value, and you can easily configure that to be filled after your subtractions.  But that subtotal is not used in the GTS mapping, and I think that's a mistake.  You might want to create an OSS message about it, requesting that the GTS Preference value be taken from the sub-total that was clearly designed exactly for that purpose.
    In any case, good luck with the project.
    Regards,
    Dave

  • Can we restrict the partially confirmed production order from getting delet

    Dear all,
    Can we restrict the partially confirmed production order from getting deleted?
    I.e. if the production order is having status PCNF then the deletion flag indicator (status DLFL) should not be allowed to set
    SmanS
    Edited by: SAP PP Consultant on Feb 4, 2009 6:12 AM

    Hi,
    Then must be there is change in BS22.Check allowed transaction setting for Status PCNF/CNF .For reference purpose compare it with other client IDES or sand box.
    For your reference I have pasted Error log on the same.
    Balance of ORD 1000000702 is not zero
    Message no. KO115
    Diagnosis
    The balance on object ORD 1000000702 is not zero. That is, there are still costs on the object.
    System Response
    The object cannot be closed and the deletion flag must not be set.
    regards,
    Dhaval

  • Tax code not getting picked up from PO during SES

    Dear Experts,
    I am looking for configuration where the end user need not enter Tax code during SES. I tried a scenario where I did not maintain any service master and also did not enter any line item in service tab at item level, rather I processed my PO using limits.
    Now when I prepare SES using this PO, Tax code is not getting picked up from PO and some tax code(I1) appears. Since I don't want end user to input any tax code I've left it blank.
    Finally when I am doing MIRO, i am not able select the desired Tax code(say I8) as it is not available for selection. I get only one Tax code(say I1) available for selection. Even other Tax codes are not available for selection.
    Please advise, how do I resolve this, why is the Tax code not getting picked up in SES? and why am I not getting other tax codes for selection in MIRO?
    Thanks and Regards
    Mansih

    Hi,
    Tax for service maintained in the service PO in the INVOICE TAB in item details. You are not going to maintain the service tax during SES. In SES you are just recognizing / confirming the vendor performed /completed the required service given to him.
    During invoice tax code will flow from service PO to Invoice & you need to just select check box u201Ccalculate taxu201D & remove default tax code in MIRO, if any tax code set for default entry in MIRO. If you want your service tax code should appear in the MIRO screen then just activate in t.code:OBZT (relevant for all transaction),then  you can select your service tax code during invoice verification WRT service PO.
    Regards,
    Biju K

  • Z implementation not getting picked for BADI  - MB_DOCUMENT_BADI

    Hi,
    I have a done a z implemenatation for standard badi MB_DOCUMENT_BADI in ECC6.In Tcode MIIGO after giving  2 line items when i save it that Zimplemen is not getting picked.
    In 4.6c the same Z implementation is getting picked.
    can you please help me out in this.

    Hi Rajeev,
    I am not sure about the definition of Badi and hence am assuming that the filter is set....and the value for the z implementation does not match the value passed from the call point. Can you please check this and confirm
    Regards,
    Jemin

  • Open Item not getting Cleared automatically

    Dear Sir,
    For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
    Our business scenario is as below :
    After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
    My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
    Regards
    B Mittal
    Regar

    PO number cannot be taken as sort feild  hence the value is in blank always.
    You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
    Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
    the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
    reward if useful
    sarma

  • Release Strategy for Contract is not getting picked whereas it is ok for PO

    Dear Experts,
    I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
    I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
    Kindly resolve the issue.
    Satish

    S0004830404 wrote:
    Dear Experts,
    >
    > I have created release strategy for PO with doc type, p.org, net value as chars and frg_ekko as class and release group as 02.
    > I kept NB,FO,MK and WK as char values. it is working fine for PO's whereas it is not getting picked for Contracts. we need same release strategy for PO as well as for Contract.
    >
    > Kindly resolve the issue.
    >
    > Satish
    hi,
    use create other characteristic for value CEKKO-GNETW in this use the mk , wk values in value field and assign this characteristic to your class and save.
    Thanking you

Maybe you are looking for

  • Reducing the Freight cost on material value for undelivered material

    Hi Experts, Summary :  The material supplier vendor needs to be paid for full quantity of material. The freight transport is allowed an under tolearance of 0.5% on the material to be supplied. If the delivered material quantity breaches the 0.5% unde

  • Transfer of line items from 1 reconciliation A/c to another reconciliation

    Hi Experts Can you please suggest me how to carry on transferring line items from one reconciliation A/c to another reconciliation A/c, is there any recommendation to this pls suggest Regards Sreenivasulu

  • IPhoto Journals = MobileMe Gallery Replacement?

    Hi, This afternoon I down loaded the iPhoto for iOS and was able to export a journal to iCloud. I also added the rascal to my "Home Page" and mailed the url to myself. Viewing the url shows all of the journals and clicking on one shows the pictures.

  • Where can I find this Sony Vegas effect in Final Cut Pro X?

    Hi all, I have posted a video link below.  If you watch between :26 and :45 (and throughout the video) you will see a sort of "flashing" effect that happens as a transition between screens.  I have tried splitting screens and adding gaps but that doe

  • Code syntax for logical ABM components

    Hello, I have a simple programming question. I have a simple condition along the lines of, If  -1.5< Vd <1.5, then condition 1 Otherwise, condition 2 How does one do this in the ABM code syntax? I know in C+ it'd be along the lines of what I'd writte