Patching failed with strange deps.

Using ZLM72 fully patched and mirrored SLES10-SP2-Updates and OES2-SP1-Updates channels and applied it to my iFolder server running kernel-vmi 0.34, virtualized in esx. Cannot apply these patches cuz of this:
12 Mar 2009 12:51:07 INFO BundleManager Bundle preparation failed: Unresolved dependencies:
Updating mono-data-1.2.2-12.22.i586[System packages] to mono-data-1.2.2-12.24.i586[Mandatory Bundles]
mono-core-1.2.2-12.22.i586[Mandatory Bundles] provides mono-core == 1.2.2-12.22, but another version of that package is already installed.
mono-core-1.2.2-12.22.i586[System packages] provides mono-core == 1.2.2-12.22, but is scheduled to be uninstalled.
Can't satisfy requirement mono-core == 1.2.2-12.22 for mono-data-1.2.2-12.22.i586[System packages]
Can't install mono-data-1.2.2-12.24.i586[Mandatory Bundles], since mono-data-1.2.2-12.24.i586[Mandatory Bundles] is already marked as needing to be installed
Marking this resolution attempt as invalid.
12 Mar 2009 12:51:07 ERROR ScheduledActionsModule Novell.Zenworks.Zmd.BUNDLE_INSTALL_ERROR: Novell.Zenworks.Zmd.BUNDLE_INSTALL_ERROR
Novell.Zenworks.Zmd.Public.ZenException: Failed to prepare bundles for install: Unresolved dependencies:
Updating mono-data-1.2.2-12.22.i586[System packages] to mono-data-1.2.2-12.24.i586[Mandatory Bundles]
mono-core-1.2.2-12.22.i586[Mandatory Bundles] provides mono-core == 1.2.2-12.22, but another version of that package is already installed.
mono-core-1.2.2-12.22.i586[System packages] provides mono-core == 1.2.2-12.22, but is scheduled to be uninstalled.
Can't satisfy requirement mono-core == 1.2.2-12.22 for mono-data-1.2.2-12.22.i586[System packages]
Can't install mono-data-1.2.2-12.24.i586[Mandatory Bundles], since mono-data-1.2.2-12.24.i586[Mandatory Bundles] is already marked as needing to be installed
Marking this resolution attempt as invalid.
Any ideas?

Hi again, sorry for delay
allow-rebuild false
compute-package-device-updates false
show-updates-icon false
store-file-deps true
So I guess its enabled then?
"brunold" <[email protected]> wrote in message
news:[email protected]..
>
> Anders,
>
> check if you have the store-file-deps enabled in the zcc /
> configuration / zlm server preferences.
>
> I guess it is disabled and therefor not the full rpm information was
> stored in zlm when you uploaded the sles 10 and oes 2 distribution and
> now it fails to solve some dependencies.
>
> In case you have a sles 10 sp2 network installation source add that as
> another source as well via yast / software / installation sources, wait
> a few seconds, refresh the zlm client and see if that would work. That
> would verify the store-file-deps theory.
>
> Rainer
>
>
> --
> brunold
> ------------------------------------------------------------------------
> brunold's Profile: http://forums.novell.com/member.php?userid=562
> View this thread: http://forums.novell.com/showthread.php?t=363701
>

Similar Messages

  • Patch failing with Class not found: oracle.apps.ad.jri.adjcopy

    Hi.
    Running a patch today and it is failing with:
    Class not found: oracle.apps.ad.jri.adjcopy
    The log states this:
    STRT_TASK: [Run adjcopy.class] [] [Tue Mar 02 2010 13:18:22]
    Running adjcopy.class:
    adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy @D:\oracle\testappl\admin\TEST\out\apps.cmd
    Error:
    Program exited with status 1
    Cause: The program terminated, returning status code 1.
    adjava -mx512m -nojit oracle.apps.ad.jri.adjcopy @D:\oracle\testappl\admin\TEST\out\apps.cmd
    Calling D:\oracle\testcomn\util\jre\1.1.8\bin\jre.exe ...
    Class not found: oracle.apps.ad.jri.adjcopy
    AD Run Java Command is complete.
    D:\oracle\testappl\admin\TEST\out>
    I have tried running maually and still no luck.
    It is a frteshly cloned environment. Autoconfig has been run successfully.
    The only help from Metalink was that I have unzipped the patches in a folfer with space in it. So I renamed folder but still same error.
    The patch is 7415848 ATG Framework Patch.
    oracle 11.5.10.2, Windows 2003, RDBMS 10.2.
    Thanks in advance,
    DA
    Another thing I tried was to relink, but got the following:
    Do you wish to force regeneration of all jar files? [No] ?
    Generating any out of date or missing jar files.
    Signing product JAR files in JAVA_TOP -
    D:\oracle\testcomn\java
    using entity Customer and certificate 1.
    Class not found: oracle.apps.ad.jri.adjversion
    AD Administration error:
    aiojavaGetJavaVersion(), ERROR [code= 1] creating javaversionFile.
    Error : java version file format not correct
    adogjf() Unable to generate jar files under JAVA_TOP
    Backing up restart files, if any......Done.
    You should check the file
    D:\oracle\testappl\admin\TEST\log\adadmin.log
    for errors.
    D:\oracle\testappl\ad\11.5.0\bin>
    Edited by: Dan A on Mar 2, 2010 10:03 AM

    Dan,
    Please see if these documents are applicable.
    Note: 392870.1 - Generate product JAR files aiojavaGetJavaVersion(),ERROR creating javaVersionFile
    Note: 264911.1 - adutilities error out aiojavaGetJavaVersion(), Error creating javaversionFile
    Regards,
    Hussein

  • RH7.3/8i glibc stubs patch fails with "basename: too few arguments"

    Running ./setup_stubs.sh from glibc-2_1_3-stubs.tar and in the middle of the scrolling screens of printlns I get a bunch of these:
    checking file '/opt/ora8/otrace/demo/atmoci.mk'...OK.
    checking file '/opt/ora8/otrace/lib/env_otrace.mk'...OK.
    checking file '/opt/ora8/otrace/lib/ins_otrace.mk'...OK.
    Rebuilding client shared library...expr: syntax error
    expr: syntax error
    basename: too few arguments
    Try `basename --help' for more information.
    done.
    Relinking executables:
    running 'ins_rdbms.mk'...done.
    running 'ins_net_client.mk'...done.
    This has happened on 3 different servers that I'm aware of. We didn't notice the errors at first (since the install starts and ends OK I guess), but I just found them after investingating why these linux boxes all hang on OS shutdown (on the killall line).
    I found one message in google from someone who had the same problem. Their solution was to reinstall oracle after applying a different (non-oracle) glibc compatibiliyt path to linux. I don't want to do that, any way to fix these patch scripts?

    No, I have not been able to track down any information on this and it is still occuring. The work around for shutting down the OS is to call /etc/init.d/oracle stop, wait for it to hang, control-c, run /etc/init.d/oracle start, once it is up immediately run /etc/init.d/oracle stop again and it won't hang this time. Then you can shutdown the OS properly.

  • Patch 9655006 failed with code 135 when applying to Oracle Restart

    Hi all,
    I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
    I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
    Everything is OK for grid applying with success.
    When I apply this patch to oracle db home, I get :
    Oracle Interim Patch Installer version 11.2.0.1.5
    Copyright (c) 2010, Oracle Corporation. All rights reserved.
    Argument(s) Error... Given 'ocmrf' file does not exists.
    Please check the arguments and try again.
    OPatch failed with error code 135
    I've given the complete path and filename (same as for grid applying).
    I've found A document [ID 1283954.1], but not useful in my case.
    Any ideas for workaround ?
    TIA
    yang
    ps. this does not occur when applying to a RAC with 2 nodes.

    yang wrote:
    Hi all,
    I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
    I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
    Everything is OK for grid applying with success.
    When I apply this patch to oracle db home, I get :
    Oracle Interim Patch Installer version 11.2.0.1.5
    Copyright (c) 2010, Oracle Corporation. All rights reserved.
    Argument(s) Error... Given 'ocmrf' file does not exists.
    Please check the arguments and try again.
    OPatch failed with error code 135
    I've given the complete path and filename (same as for grid applying).
    I've found A document [ID 1283954.1], but not useful in my case.
    Any ideas for workaround ?
    TIA
    yang
    ps. this does not occur when applying to a RAC with 2 nodes.Hello Yang,
    Could you try it again with debug info? Before you run the opatch, run the following:
    $ set OPATCH_DEBUG=TRUE; export OPATCH_DEBUG
    Regards
    Gokhan

  • Patch p11879896_112020_Generic failed with req comp missing error

    Hi,
    Applying the subject patch on Linux 32 with
    opatch apply -invPtrLoc /u01/app/oraInventory/oraInst.loc
    failed (with the message
    Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ] ),
    the debug follows below. Any idea?
    Thank you.
    Anatoliy
    _osArch is
    /u01/app/oracle/product/11.2.0/home11gR2/jdk/bin/java -mx96m -cp /u01/app/oracle/product/11.2.0/home11gR2/OPatch/ocm/lib/emocmutl.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/share.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/srvm.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/orai18n-mapping.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/xmlparserv2.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatch.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchutil.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchprereq.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchactions.jar: -DOPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2 -DOPatch.DEBUG=true -DOPatch.RUNNING_DIR=/u01/app/oracle/product/11.2.0/home11gR2/OPatch oracle/opatch/OPatch apply -invPtrLoc /u01/app/oraInventory/oraInst.loc
    Invoking OPatch 11.1.0.6.6
    Oracle Interim Patch Installer version 11.1.0.6.6
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    CmdLineParser::initRuntimeOptions()
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$StringArguments
    There are 7 fields defined in this class.
    adding option "fp"
    adding option "dp"
    adding option "fr"
    adding option "dr"
    adding option "mp"
    adding option "phbasedir"
    adding option "phbasefile"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$BooleanArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$BooleanArguments
    There are 2 fields defined in this class.
    adding option "delay_link"
    adding option "cmd_end"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$IntegerArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$IntegerArguments
    There are 2 fields defined in this class.
    adding option "integerarg1"
    adding option "integerarg2"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$StringtegerArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$StringtegerArguments
    There are 5 fields defined in this class.
    adding option "stringtegerarg1"
    adding option "stringtegerarg2"
    adding option "ps"
    adding option "mp"
    adding option "xmlinput"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$DoubleArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$DoubleArguments
    There are 2 fields defined in this class.
    adding option "doublearg1"
    adding option "doublearg2"
    Checking on class oracle.opatch.opatchutil.CmdLineOptions$RawStringArguments
    Get list of fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$RawStringArguments
    There are 1 fields defined in this class.
    adding option "cmd"
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession"
    initializing String option 0, fp
    initializing String option 1, dp
    initializing String option 2, fr
    initializing String option 3, dr
    initializing String option 4, mp
    initializing String option 5, phbasedir
    initializing String option 6, phbasefile
    done init. String arg.
    initializing Boolean option 0, delay_link
    initializing Boolean option 1, cmd_end
    done init. Boolean arg.
    initializing Integer option 0, integerarg1
    initializing Integer option 1, integerarg2
    done init. Integer arg.
    initializing StringTeger option 0, stringtegerarg1
    initializing StringTeger option 1, stringtegerarg2
    initializing StringTeger option 2, ps
    initializing StringTeger option 3, mp
    initializing StringTeger option 4, xmlinput
    done init. SringTeger arg.
    initializing Double option 0, doublearg1
    initializing Double option 1, doublearg2
    done init. Double arg.
    initializing RawString option 0, cmd
    done init. RawString arg.
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchutil.OUSession", done.
    CmdLineParser::initRuntimeOptions()
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$StringArguments
    There are 3 fields defined in this class.
    adding option "phbasedir"
    adding option "patchids"
    adding option "phbasefile"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$BooleanArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$BooleanArguments
    There are 2 fields defined in this class.
    adding option "booleanarg1"
    adding option "booleanarg2"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$IntegerArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$IntegerArguments
    There are 2 fields defined in this class.
    adding option "integerarg1"
    adding option "integerarg2"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$StringtegerArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$StringtegerArguments
    There are 2 fields defined in this class.
    adding option "stringtegerarg1"
    adding option "stringtegerarg2"
    Checking on class oracle.opatch.opatchprereq.CmdLineOptions$DoubleArguments
    Get list of fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$DoubleArguments
    There are 2 fields defined in this class.
    adding option "doublearg1"
    adding option "doublearg2"
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession"
    initializing String option 0, phbasedir
    initializing String option 1, patchids
    initializing String option 2, phbasefile
    done init. String arg.
    initializing Boolean option 0, booleanarg1
    initializing Boolean option 1, booleanarg2
    done init. Boolean arg.
    initializing Integer option 0, integerarg1
    initializing Integer option 1, integerarg2
    done init. Integer arg.
    initializing StringTeger option 0, stringtegerarg1
    initializing StringTeger option 1, stringtegerarg2
    done init. SringTeger arg.
    initializing Double option 0, doublearg1
    initializing Double option 1, doublearg2
    done init. Double arg.
    CmdLineHelper::loadRuntimeOption() for Class "oracle.opatch.opatchprereq.PQSession", done.
    reqVer For using getEnv() = 10.2.0.4.0
    curVer = 11.2.0.1.0
    Current Ver later than required? :true
    Current Ver equals required? :false
    Checking EMDROOT using OUI's API...
    CmdLineParser.processOPatchProperties() begins
    CmdLineParser.processOPatchProperties() ends
    OUIReplacer::runEnvScript() called
    SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Input Stream
    SystemCall:RuntimeExec(cmds, runDir): Started thread to read Input Stream
    SystemCall:RuntimeExec(cmds, runDir): GOING to start thread to read Error Stream
    ReaderThread::run(): Stream InputStream about to be read
    SystemCall:RuntimeExec(cmds, runDir): Started thread to read Error Stream
    SystemCall:RuntimeExec(cmds, runDir): GOING into process.waitFor()
    ReaderThread::run(): Stream ErrorStream about to be read
    ReaderThread::run(): Stream InputStream reading completed
    ReaderThread::run(): Stream ErrorStream reading completed
    SystemCall:RuntimeExec(cmds, runDir): process.waitFor() is OVER
    SystemCall:RuntimeExec(cmds, runDir): Error stream thread joined successfully
    SystemCall:RuntimeExec(cmds, runDir): Input stream thread joined successfully
    OUIReplacer::setKeyValue() called
    OPatchSession::main()
    Environment:
    OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
    oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
    oracle.installer.oui_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui
    oracle.installer.library_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui/lib/linux
    oracle.installer.startup_location=/u01/app/oracle/product/11.2.0/home11gR2/oui
    OPatch.PLATFORM_ID=
    os.name=Linux
    OPatch.NO_FUSER=
    OPatch.SKIP_VERIFY=null
    OPatch.SKIP_VERIFY_SPACE=null
    oracle.installer.clusterEnabled=false
    TRACING.ENABLED=TRUE
    TRACING.LEVEL=2
    OPatch.DEBUG=true
    OPATCH_VERSION=11.1.0.6.6
    Bundled OPatch Property File=properties
    Minimum OUI version: 10.2
    OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
    Stand-Alone home : false
    Environment:
    OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
    oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
    oracle.installer.oui_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui
    oracle.installer.library_loc=/u01/app/oracle/product/11.2.0/home11gR2/oui/lib/linux
    oracle.installer.startup_location=/u01/app/oracle/product/11.2.0/home11gR2/oui
    OPatch.PLATFORM_ID=
    os.name=Linux
    OPatch.NO_FUSER=
    OPatch.SKIP_VERIFY=null
    OPatch.SKIP_VERIFY_SPACE=null
    oracle.installer.clusterEnabled=false
    TRACING.ENABLED=TRUE
    TRACING.LEVEL=2
    OPatch.DEBUG=true
    OPATCH_VERSION=11.1.0.6.6
    Bundled OPatch Property File=properties
    Minimum OUI version: 10.2
    OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
    Stand-Alone home : false
    Oracle Home : /u01/app/oracle/product/11.2.0/home11gR2
    Central Inventory : /u01/app/oraInventory
    from : /u01/app/oraInventory/oraInst.loc
    OPatch version : 11.1.0.6.6
    OUI version : 11.2.0.1.0
    OUI location : /u01/app/oracle/product/11.2.0/home11gR2/oui
    Log file location : /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch2012-01-19_04-10-13AM.log
    Patch history file: /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch_history.txt
    OUISessionManager::instantiate()
    lockCentralInventory(): OUISessionManager::lockCentralInventory() will retry 0 times with 120-second interval to get an Inventory lock.
    OUISessionManager::lockCentralInventory() try round # 1
    OUISessionManager::setupSession()
    OUISessionManager::setupSession() instantiates a OUIInventorySession obj.
    OUISessionManager::setupSession() init. the session
    OUISessionManager::setupSession() sets up READ-ONLY session
    OUISessionManager::setupSession() done
    OUISessionManager::lockCentralInventory() set up session OK
    reqVer = 10.2
    curVer = 11.2.0.1.0
    Current Ver later than required? :true
    Current Ver equals required? :false
    ApplySession::process()
    ApplySession::process(): loading patch object.
    ApplySession::loadAndInitPatchObject()
    PatchObject(patchLocation)
    PatchObject::PatchObject looks for the actions file /u01/app/oraInventory/etc/config/actions.xml
    PatchObject::PatchObject looks for the inventory file /u01/app/oraInventory/etc/config/inventory.xml
    parserXMLFile : start
    parserXMLFile : start
    Bugs fixed by this patch 11879896:
    11879896: SMPSSE : DATABASE PERFORMANCE OVERVIEW DOESNT WORK ON MAC/LINUX
    PatchObject::setPreReadMeAction: readMeFile = /u01/app/oraInventory/custom/pre.txt
    noOp = true
    fileContent =
    PatchObject::setPreScriptAction: [PreScriptAction:-------------------------------
    no-op.=true, fileLoc=/u01/app/oraInventory/custom/scripts/pre
    Pre script is not present.-----------------------------------------------]
    PatchObject::setPostReadMeAction: readMeFile = /u01/app/oraInventory/custom/post.txt
    noOp = true
    fileContent =
    PatchObject::setPostScriptAction: [PostScriptAction:------------------------------
    no-op.=true, fileLoc=/u01/app/oraInventory/custom/scripts/post
    Post script not present.-----------------------------------------------]
    PatchObject::setInitReadMeAction: readMeFile = /u01/app/oraInventory/custom/init.txt
    noOp = true
    fileContent =
    PatchObject::setInitScriptAction: [InitScriptAction:-------------------------------
    no-op.=true, fileLoc=/u01/app/oraInventory/custom/scripts/init
    Init script not present.-----------------------------------------------]
    ApplySession applying interim patch '11879896' to OH '/u01/app/oracle/product/11.2.0/home11gR2'
    ApplySession::processLocal()
    OPatchEnv:
    [OPatchEnv: OracleHome="/u01/app/oracle/product/11.2.0/home11gR2", force= false, report= false, inv. mod.= true, system mod.= true, local mode= false, lsinv all= false, lsinv detail= false, lsinv patch= false, nolink= false, Retry=30, Delay=120, CallerName=OPatch, CallerVersion=11.1.0.6.6, SessionType=apply, JdkLoc=/u01/app/oracle/product/11.2.0/home11gR2/jdk, JreLoc=/u01/app/oracle/product/11.2.0/home11gR2/jre/1.4.2, OracleHome via -oh=, OracleHome via env.=/u01/app/oracle/product/11.2.0/home11gR2, OracleHome via response file=, OPatch recognised InvPtrLoc=/u01/app/oraInventory/oraInst.loc, User specified InvPtrLoc=/u01/app/oraInventory/oraInst.loc, No relink=false, Patch ID used in Rollback=, Patch ID with OPack timestamp=, PreOpt=, PostOpt=, OSName=Linux, IsWindows=false, .patch_storage=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage, .patch_storage/<ID>=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/, Whole patch is saved to=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//original_patch, Backup for Restore path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//backup, Backup for Rollback path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//files, FilesMap info from=/u01/app/oracle/product/11.2.0/home11gR2/inventory/oneoffs/<Patch_ID>, PatchLoc=/u01/app/oraInventory, SyntaxErrorMsg= ]
    Process InitReadMeAction()
    InitReadMeAction::catFile() is a no-op
    InitScriptAction::process() is a no-op
    Running Prerequisite check "CheckApplicableProduct"...
    PrereqAPI::checkApplicableProduct
    PrereqAPI::checkStandAloneHome())
    Prereq checkApplicableProduct passed
    OPatch checks if the patch is applicable on this home product type
    ApplySession::setupPatchStorage()
    ApplySession::processLocal() load the inventory
    OracleHomeInventory::createInventoryObj()
    OracleHomeInventory::createInventoryObj() gets OUIInventorySession object
    Locker::lock()
    calling lockCentralInventory()
    OUISessionManager::getInventorySession()
    Caller Details:
         Caller Name : OPatch     Caller Version : 11.1.0.6.6     Requested Read-only access : false     Oracle Home : /u01/app/oracle/product/11.2.0/home11gR2
    OUISessionManager::instantiate()
    lockCentralInventory(): OUISessionManager::lockCentralInventory() will retry 30 times with 120-second interval to get an Inventory lock.
    OUISessionManager::lockCentralInventory() try round # 1
    OUISessionManager::setupSession()
    OUISessionManager::setupSession() instantiates a OUIInventorySession obj.
    OUISessionManager::setupSession() init. the session
    OUISessionManager::setupSession() sets up READ-WRITE session
    OUISessionManager::setupSession() done
    OUISessionManager::lockCentralInventory() set up session OK
    OUISessionManager::register()
    Registering the caller : OPatch
    Locker::lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage exists, no need to mkdir.
    Locker::lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free exists, will delete file.
    Locker::lock() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
    OracleHomeInventory::createInventoryObj() gets OUIInstallAreaControl object
    OracleHomeInventory::createInventoryObj() gets OUIInstallInventory object
    OracleHomeInventory::createInventoryObj() gets OUIOracleHomeInfo object
    OracleHomeInventory::createInventoryObj() construction done
    OracleHomeInventory::load()
    OracleHomeInventory::load() gets a Vector of all product entries
    OracleHomeInventory::load() gets a Vector of all one-off entries
    OracleHomeInventory::load() begins to process raw data from OUI to build up OPatch primitive classes
    Rac::getInstance()
    initializing racType
    Rac::getClusterNodes()
    calling OiiOracleHomeInfo::getNodeList()
    OiiiOracleHomeInfo::getNodeList() returned 0 elements.
    RAC::getClusterNodes() returned a list of 0 elements.
    User did not use -no_inventory, so why clusterNodes are empty?
    clusterNodes is null or empty, set racType to NO_RAC
    checkIfSidAddition()
    OracleHomeInventory::load()
    OracleHomeInventory::load() gets a Vector of all product entries
    OracleHomeInventory::load() gets a Vector of all one-off entries
    OracleHomeInventory::load() begins to process raw data from OUI to build up OPatch primitive classes
    ApplySession::processConflict()
    PrereqAPI::checkConflictAgainstOHWithDetail()
    Number of Oneoffs in the Oracle Home : 0
    PrereqAPI::checkConflictAgainstOH()
    List of patches on which the InterConflict prereq runs are :
    11879896
    OneOffEntry::getBugIDsFixed()
    OneOffEntry::getBugIDsFixed() returns 1 bugs.
    There are no conflicts/supersets.
    Prereq checkConflictAgainstOHWithDetail Passed
    Run all the prereqs related to apply.
    Running prerequisite checks...
    Running prerequisite check "CheckForInputValues" ...
    PrereqAPI::checkForInputValues()
    Input values is present for the all the actions of the given patches.
    Running prerequisite check "CheckSystemSpace" ...
    PrereqAPI::checkSystemSpace()
    Finding the total space needed...
    Total space needed for the patches are: 11865356
    Checking if enough space is present on the disk...
    Required amount of space is availale on the disk.
    Prereq checkSystemSpace Passed
    Enough system space is available.
    Running prerequisite check "CheckPatchApplicableOnCurrentPlatform" ...
    PrereqAPI::checkPatchApplicableOnCurrentPlatform()
    Reading the platforms for patch11879896
    Genereic Platform ID 0is specified for patch : 11879896
    All the given patches are applicable on the current platform.
    Running prerequisite check "CheckSystemCommandAvailable" ...
    PrereqAPI::checkSystemCommandAvailable()
    Rules::shouldSearchOrInvokeFuser()
    user didn't set OPATCH_NO_FUSER but executable list is either null or empty, return false.
    PatchObject: Patch will need to following commands:
    Need fuser archive make mkpatch sqlplus ptlpatch
    false false false false false false
    Have fuser archive make mkpatch sqlplus ptlpatch
    true true true true true true
    All the required commands are available.
    Prereq checkSystemCommandAvailable Passed
    All the required system commands are present.
    Running prerequisite check "CheckActiveFilesAndExecutables" ...
    PrereqAPI::checkActiveFilesAndExecutables()
    Invoking fuser on the executable list...
    getCommandInPropertyFiles(): looking up command "fuser" in property file "properties"
    Path in merged property files: /sbin:/usr/sbin:/usr/local/sbin
    check on "/sbin/fuser"
    found "/sbin/fuser"
    getCommandInPropertyFiles(): looking up command "fuser" in property file "properties"
    Path in merged property files: /sbin:/usr/sbin:/usr/local/sbin
    check on "/sbin/fuser"
    found "/sbin/fuser"
    There are no active executables.
    Prereq checkActiveFilesAndExecutables Passed
    None of the executables are active.
    Running prerequisite check "CheckApplicable" ...
    PrereqAPI::checkApplicable() checking if each Action is applicable or not
    PrereqAPI::checkComponents()
    PrereqAPI::checkComponents searches for required compoments.
    OracleHomeInventory::haveComponents()
    there are 1 components to check.
    Patch Component (component to check) is "oracle.sysman.console.db", "11.2.0.2.0", required = "true"
    OracleHomeInventory::haveComponents() : installInventory.getCompInvEntries() on "oracle.sysman.console.db", homeIndex = "1" returns 1 components.
    Process installed component "oracle.sysman.console.db", version "11.2.0.1.0"
    Check installed product: name="oracle.sysman.console.db", ver="11.2.0.1.0"
    Installed Comp >< Patch Comp:
    Installed Comp Version later than Patch Comp = false
    Installed Comp can replace Patch Comp = false
    Install Comp Version equals or is later than Patch Comp: false
    Req. comp. not in OH inventory: oracle.sysman.console.db, 11.2.0.2.0
    Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ]
    PrereqAPI::checkComponents searches for optional compoments.
    OracleHomeInventory::haveComponents()
    OracleHomeInventory::haveComponents() gets an empty list. Nothing to do, return empty list back.
    Prerequisite check "CheckApplicable" failed.
    The details are:
    Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ]
    System intact, OPatch will not attempt to restore the system
    Locker::release()
    OUISessionManager::unRegister()
    Un-Registering the caller : OPatch
    Locker::release() deletes /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
    Locker::release() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free
    Cleaning up the directory : "/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_unzip"...
    OPatch failed with error code 74

    Helios,
    Looks like I should not apply this patch, it assume the version of 11.2.0.2, I am on 11.2.0.1.
    What took me off a little was this statement me in the BUG:12317756 - DBCONSOLE PERFORMANCE PAGE NO LONGER DISPLAYS ON LINUX
    "it used to work in previous versions including 11.2.0.1"
    and this is not true for me - I have 11.2.0.1. and it is not working - the graph can not be displayed.
    So I guess I am back to the original question I was asking about in my other post. Let me see if other 2 Notes you provided will take me to any other patch
    Thank you
    Anatoliy

  • Worker failed with patch 3480000

    Dear All,
    Please worker failed during patch 3480000 as following:
    H:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe &ui_apps SYSADMIN 'System Administrator' SYSADMIN CONCURRENT FND FNDGSCST ALL 10
    Error:
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct application short name is specified for your responsibility.
    Please advise
    Tarek

    Hussein,
    Following is part of worker log file:
    Time when worker completed job: Fri May 20 2011 09:50:06
    Evaluating symbolic arguments ....
    Done evaluating symbolic arguments.
    Time when worker started job: Fri May 20 2011 09:50:06
    Start time for file is: Fri May 20 2011 09:50:06
    H:\oracle\prodappl\fnd\11.5.0\bin\CONCSUB.exe &ui_apps SYSADMIN 'System Administrator' SYSADMIN CONCURRENT FND FNDGSCST ALL 10
    Error:
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.Please enter a valid responsibility. The responsibility System Administrator does not exist or is not active. Check that the correct application short name is specified for your responsibility.
    AD Worker error:
    The above program failed with error code 3.
    See the AD Worker log file and/or the program log file for details
    Thanks,
    Tarek

  • ACR 8.4 CC RC install fails with AAM message 'patch not applicable'

    ACR 8.4 CC RC install fails with AAM message 'patch not applicable' - Running Photoshop CC on OSX 10.7.5
    Anyone seen this or have any ideas for a fix?
    I also have my legacy CS6 installed on the same Mac - tried installing ACR 8.4 CS6 RC and that fails with the same dialogue box from AAM
    The DNG converter installs no issue.
    Thx
    Chris.

    Do you have some other software, like Photoshop Elements 12 on your system that would generally also be compatible with ACR 8.4 final but isn’t compatible with the RC because the RC’s only for PS users? 
    I installed the RC the same day it was released on my computer that has PS-CS6 & PS-CC with Windows 7 and it worked ok, so the update generally works, but something isn’t on your systems.
    Are you up-to-date with your PS-CC version, which seems to be 14.2.1:
    http://blogs.adobe.com/crawlspace/2014/02/photoshop-cc-14-1-1-update-now-available.html
    And is CS6 updated to 13.0.6?
    http://www.adobe.com/support/downloads/product.jsp?product=39 <http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh> &platform=Macintosh

  • Critical patch update fails with error code 73

    RDBMS Version: 10.2.0.3
    Operating System and Version: solaris 5.9
    Error Number (if applicable): error code 73
    Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
    Product Version: 10.2.0.3
    Critical patch update fails with errors(urgent)
    UD00_102030>pwd
    /mnt/base_install/downloads/10gR2/cpu/6394981
    UD00_102030> opatch apply
    Invoking OPatch 10.2.0.3.0
    Oracle interim Patch Installer version 10.2.0.3.0
    Copyright (c) 2005, Oracle Corporation. All rights reserved..
    Oracle Home : /u01/app/oracle/product/10.2.0
    Central Inventory : /u01/app/oracle/oraInventory
    from : /var/opt/oracle/oraInst.loc
    OPatch version : 10.2.0.3.0
    OUI version : 10.2.0.3.0
    OUI location : /u01/app/oracle/product/10.2.0/oui
    Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
    Failed to load the patch object. Possible causes are:
    The specified path is not an interim Patch shiphome
    Meta-data files are missing from the patch area
    Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
    Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
    ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code 73
    This cpu oct 2007 patch for 10.2.0.3(for solaris)

    That's great :) ...
    Does anybody know which is the difference between
    opatch napply
    and
    opatch apply ?
    thanks,
    P.

  • OPatch failed with error code 74 while apply patch 10093985 - 10352313

    Hello,
    In OBIEE 11g, we had a problem that the map only appear if the language selected is English. To fix this error we need to install de pach "10352313" who fix the bug "10093985". I make all the steps that are in the manual. Download the last OPatch, install and configured. All the prerequisites are ok. When I went to the folder of the patch to run the comand "opatch apply -jre $ORACLE_HOME/jdk/jre" I had this error:
    $ opatch apply -jre $ORACLE_HOME/jdk/jre
    Invoking OPatch 11.2.0.1.4
    versão do Installer Temporário Oracle 11.2.0.1.4
    Copyright (c) 2010, Oracle Corporation. Todos os direitos reservados.
    Oracle Home : /oracle/Middleware/Oracle_BI1
    Inventário Central: /home/oracle/oraInventory
    de : /etc/oraInst.loc
    Versão de OPatch : 11.2.0.1.4
    Versão de OUI : 11.1.0.8.0
    Localização de OUI : /oracle/Middleware/Oracle_BI1//oui
    Localização do arquivo de log: /oracle/Middleware/Oracle_BI1/cfgtoollogs/opatch/opatch2011-02-15_07-08-59AM.log
    Patch history file: /oracle/Middleware/Oracle_BI1/cfgtoollogs/opatch/opatch_history.txt
    OPatch detects the Middleware Home as "/oracle/Middleware"
    ApplySession aplicando o patch temporário '10093985' para OH '/oracle/Middleware/Oracle_BI1'
    Running prerequisite checks...
    Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
    The details are:
    Patch ( 10093985 ) is not applicable on current platform.
    Platform ID needed is : 46
    Platform IDs supported by patch are: 226
    ApplySession falha durante as verificações de pré-requisitos: Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
    Sistema intacto; o OPatch não tentará restaurar o sistema
    OPatch failed with error code 74
    I saw that the Platform ID needed is : 46 but the Platform IDs supported by patch are: 226. But this patch is for linux x86-64, and I didn't understand why it doesn't work. The machine is a Intel(R) Xeon(R) CPU 3050 @ 2.13GHz. Can anyone give a hand? Thanks for the help.

    Hello again,
    To resolve this problem I did this steps:
    1)./opatch lsinventory -invPtrLoc /oracle/Middleware/Oracle_BI1/OPatch/oraInst.loc
    2)export PATH=$PATH:/oracle/Middleware/Oracle_BI1/OPatch/
    3)export ORACLE_HOME=/oracle/Middleware/Oracle_BI1
    4)export OPATCH_PLATFORM_ID=226
    5)opatch apply -jre $ORACLE_HOME/jdk/jre
    If anyone have any questions is just say!
    Ty

  • Opatch failed with error code 74 while applying patch 5191377

    hi,
    grid10g@appsnet6 5191377]$ opatch apply
    Invoking OPatch 10.2.0.1.6
    Oracle Interim Patch Installer version 10.2.0.1.6
    Copyright (c) 2007, Oracle Corporation. All rights reserved.
    Oracle Home : /U00010.00/Grid/db10g
    Central Inventory : /etc/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 10.2.0.1.6
    OUI version : 10.2.0.1.0
    OUI location : /U00010.00/Grid/db10g/oui
    Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
    ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
    Running prerequisite checks...
    Prerequisite check "CheckApplicable" failed.
    The details are:
    Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
    ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code 74
    Please help mee

    hi,
    Thanks for the replyy
    here is the log
    SEVERE:OPatch invoked as follows: 'apply '
    INFO:
    Oracle Home : /U00010.00/Grid/db10g
    Central Inventory : /etc/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 10.2.0.1.6
    OUI version : 10.2.0.1.0
    OUI location : /U00010.00/Grid/db10g/oui
    Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
    INFO:Starting ApplySession at Thu May 29 17:34:01 IST 2008
    INFO:Starting Apply Session at Thu May 29 17:34:01 IST 2008
    INFO:ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
    INFO:Starting to apply patch to local system at Thu May 29 17:34:01 IST 2008
    INFO:Start the Apply initScript at Thu May 29 17:34:01 IST 2008
    INFO:Finish the Apply initScript at Thu May 29 17:34:01 IST 2008
    INFO:Patch 5191377 has no conflicts/superset wiht any other patch processed till now
    INFO:Checking conflicts for patch: 5191377
    INFO:Checking conflicts/supersets for patch: 5191377 with patch:5191377
    INFO:
    Running prerequisite checks...
    INFO:Space Needed : 629324
    INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5191377
    INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
    INFO:Prerequisite check "CheckApplicable" failed.
    The details are:
    Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
    SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
    INFO:System intact, OPatch will not attempt to restore the system
    INFO:Finishing ApplySession at Thu May 29 17:34:04 IST 2008
    INFO:Total time spent waiting for user-input is 0 seconds. Finish at Thu May 29 17:34:04 IST 2008
    INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
    INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
    INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
    INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
    INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
    INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
    INFO:File "/U00010.00/Grid/db10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
    ~
    ~
    ~
    ~
    ~
    "/U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log" [readonly] 38L, 2292C
    Regards,
    Pradeep

  • OPatch failed with error code 74 when applying patch PSE 13723798

    Hello all,
    tried to apply patch (PSE 13723798) to fix the no-scrollbar bug in Webcenter Portal Admin Console. But found this error during the patching process, as described below. Any solution for this?
    Running prerequisite checks. . .
    Patch 13723798: Optional component (s) missing : [ oracle.webcenter.framework, 11.1.1.4.0, higher version 11.1.1.5.0 found. ]
    Prerequisite check "CheckApplicable failed.
    The details are:
    Patch "13723798" is a no-op patch.
    ApplySession failed during the prerequisite checks: Prerequisite check "CheckApplicable" failed.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code 74

    Okay, I'll try it on VM.
    Anyway, here is the result running command: opatch lsinventory
    [oracle@CDJWPS01 13723798]$ opatch lsinventory
    Invoking OPatch 11.1.0.8.3
    Oracle Interim Patch Installer version 11.1.0.8.3
    Copyright (c) 2010, Oracle Corporation. All rights reserved.
    Oracle Home : /opt/app/Oracle/Middleware/Oracle_WC1
    Central Inventory : /home/oracle/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 11.1.0.8.3
    OUI version : 11.1.0.9.0
    OUI location : /opt/app/Oracle/Middleware/Oracle_WC1/oui
    Log file location : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtoollogs/opatch/opatch2013-05-31_20-43-34PM.log
    Patch history file : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtoollogs/opatch/opatch_history.txt
    OPatch detects the Middleware Home as "/opt/app/Oracle/Middleware"
    Lsinventory Output file location : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtool
    logs/opatch/lsinv/lsinventory2013-05-31_20-43-34PM.txt
    Installed Top-level Products (1):
    Oracle WebCenter Suite 11g 11.1.1.5.0
    There are 1 products installed in this Oracle Home.
    There are no Interim patches installed in this Oracle Home.
    OPatch succeeded.

  • OPatch failed with error code 73 while applying patch 5191377

    hi,
    while applying patch 5191377
    i got the following error
    Oracle interim Patch Installer version 10.2.0.1.0
    Copyright (c) 2005, Oracle Corporation. All rights reserved..
    Oracle Home : /U00010.00/Grid/db10g
    Central Inventory : /etc/oraInventory
    from : /U00010.00/Grid/db10g/oraInst.loc
    OPatch version : 10.2.0.1.0
    OUI version : 10.2.0.1.0
    OUI location : /U00010.00/Grid/db10g/oui
    Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch-2008_May_29_15-36-47-IST_Thu.log
    ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
    Apply Session failed: ApplySession failed to prepare the system. ApplySession: Required component(s) [ oracle.sysman.repository.core, 10.2.0.1.0 ] not present in the Oracle Home or a higher version found.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code 73
    can anyone please help to solve this issue....
    Regards
    Pradeep

    hi,
    Please find the log
    SEVERE:OPatch invoked as follows: 'apply '
    INFO:
    Oracle Home : /U00010.00/Grid/db10g
    Central Inventory : /etc/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 10.2.0.1.6
    OUI version : 10.2.0.1.0
    OUI location : /U00010.00/Grid/db10g/oui
    Log file location : /U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log
    INFO:Starting ApplySession at Thu May 29 17:34:01 IST 2008
    INFO:Starting Apply Session at Thu May 29 17:34:01 IST 2008
    INFO:ApplySession applying interim patch '5191377' to OH '/U00010.00/Grid/db10g'
    INFO:Starting to apply patch to local system at Thu May 29 17:34:01 IST 2008
    INFO:Start the Apply initScript at Thu May 29 17:34:01 IST 2008
    INFO:Finish the Apply initScript at Thu May 29 17:34:01 IST 2008
    INFO:Patch 5191377 has no conflicts/superset wiht any other patch processed till now
    INFO:Checking conflicts for patch: 5191377
    INFO:Checking conflicts/supersets for patch: 5191377 with patch:5191377
    INFO:
    Running prerequisite checks...
    INFO:Space Needed : 629324
    INFO:Prereq checkPatchApplicableOnCurrentPlatform Passed for patch : 5191377
    INFO:Prereq checkComponents failed. So, checkApplicable returning without execution.
    INFO:Prerequisite check "CheckApplicable" failed.
    The details are:
    Patch 5191377: Required component(s) missing : [ oracle.sysman.repository.core, 10.2.0.1.0 ]
    SEVERE:OUI-67074:ApplySession failed during prerequisite checks: Prerequisite check "CheckApplicable" failed.
    INFO:System intact, OPatch will not attempt to restore the system
    INFO:Finishing ApplySession at Thu May 29 17:34:04 IST 2008
    INFO:Total time spent waiting for user-input is 0 seconds. Finish at Thu May 29 17:34:04 IST 2008
    INFO:Stack Description: oracle.opatch.PrereqFailedException: Prerequisite check "CheckApplicable" failed.
    INFO:StackTrace: oracle.opatch.OPatchSessionHelper.runApplyPrereqs(OPatchSessionHelper.java:3435)
    INFO:StackTrace: oracle.opatch.ApplySession.processLocal(ApplySession.java:3529)
    INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5238)
    INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:1544)
    INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:570)
    INFO:File "/U00010.00/Grid/db10g/.patch_storage/patch_unzip" cannot be deleted as it does not exist
    ~
    ~
    ~
    ~
    ~
    "/U00010.00/Grid/db10g/cfgtoollogs/opatch/opatch2008-05-29_17-34-00PM.log" [readonly] 38L, 2292C

  • Patch: CSCun25809, AnyConnect Password Management Fails with SMS Passcode for ASA 5520

    Patch: CSCun25809, AnyConnect Password Management Fails with SMS Passcode for ASA 5520
    Will this patch be installed in a version which I can use on ASA5520, if I understand the documentation correct, this patch is only installed in versions which are running on -X models of the ASA. 9.2, 9.3

    Once the ASA has dynamic NAT enabled to an outside interface, routing between same security level will not work.
    You need to add route exempt the inside interfaces to all private subnet.

  • Broadcasting fails with more than X variables in variable screen

    Hi all,
    We have a few reports which have a variable screen with 10+ variables, mostly 3 mandatory and the rest is optional.
    Normally a pop-up appears in which you can select which type (HTML, PDF, Portal etc.) and fill in the recipients. But for the reports I'm talking about, the pop-up stays blank or give an error "page not found"
    First I thought it was an iView setting but I've compared all iviews and the settings are all the same.
    Then I thought the webtemplates could have wrong parameters, but the LAUNCH_BROADCASTER settings are the same for 0ANALYSIS_PATTERN and custom templates.
    Now I'm testing at query level and I found out that when I cut some optional variables, at some point it works and I'll get the pop-up I want.
    So I wonder if there's a restriction in the maximum number of variables in the variable screen, which has impact on broadcasting? In one query it fails with 11 or more variables, but in another query it fails with 13 variables. It doesn't matter which variable I erase, as long as I stay under the mentioned number of variables, the broadcaster works for that query.
    Is there a parameter or something which can be set?
    We are on:
    BW 7.31 SP9.30
    Thanks for your help!
    Regards,
    Daan Boon

    There is nothing restriction on no. of Query Variables while broadcasting. There is something else which causes this strange behavior. Can you update your BEx GUI to latest Patches?

  • Please help: Utility used to install the update failed with exit code {0}.

    Hi,
    I admit to being a relative newbie at Solaris 10 administration, so please exercise forbearance on my behalf.
    I have just installed Solaris 10 11/06 on my laptop x86. Everything went fairly smoothly. I used the Installation Check Tool 1.2 to decide if my machine was adequate to run the OS and with the exception of a NIC driver, it was. I downloaded the sfe driver and configured networking and it seems to work exceptionally well. However, when I run Update Manager in JDS (the only way I know how to run it), it fails to update some of the packages. Sometimes, if I retry the same packages, sometimes it will eventually work. But it keeps failing with the following error on a consistent basis over the last several days:
    Utility used to install the update failed with exit code {0}.
    I hunted around on the web and the results were not promising. Is there a log somewhere that will give me the actual error or do y'all know of a quick fix.
    Thanks,
    Will

    That is strange indeed, could you try downloading and
    applying the unsigned zip to see if that works?The problem persits:
    # patchadd -M /root/119116/
    Validating patches...
    Loading patches installed on the system...
    Done!
    Loading patches requested to install.
    Done!
    Checking patches that you specified for installation.
    Done!
    Approved patches will be installed in this order:
    119116-22
    Preparing checklist for non-global zone check...
    Checking non-global zones...
    Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
    Non-global zone check failed. No change made to the System.
    Patchadd exiting.

Maybe you are looking for

  • How to group a report by formula field.

    Hi, I need to create a report based on the following report: http://s464.photobucket.com/albums/rr8/einas121809/ This new report should be grouped by days and status. Then, each group should display the details of each record such as Report No, Open

  • Power View Created Using Excel Data are not visible in BI Docs

    I have created a Excel sheet with data and Then I added a Power View for that data set. I added this Excel Sheet to the Power BI Docs in Office 365 share-point Online. But when I open this uploaded Excel file. There is only the Datasheet but no pages

  • EDGE SIMULATOR CAN'T READ DATA FROM SIMULATION.XML

    HI, i have installed the SES(10.1.3) and before that Application server 10.1.3 . I have followed all the steps given at the following link http://www.oracle.com/technology/obe/1013/fusion_middleware/integration/ses/configuringsimulator/configuresimul

  • Problems with a CompUSA Demo Emac

    My mother purchased a G4 Emac from compUSA about 6 months ago. The Emac was a floor demo unit, and they did not restore the computer prior to our picking it up. It came pre-loaded with Iphoto 5, and the ususal programs. I got my mother to start using

  • Emtpy 'AppModel' in workspace (after include frompublicplans)

    Hi, I just do 'rpcreate -fr bt:myrepos', I create a workspace I include the 'AppModel' from the baseline (includepublicplan) and that plan appears to be empty. Do I need a parameter for rpcreate ? When I try to import a model, I got this: (14) CMD: I