Pavilion 23xi - display problems

I'm using the Pavilion 23xi Monitor. since yesterday, on the left side, there were some grids and redisch color. But the right side of the monitor displays normally. changed cable to HDMI, changed computer, but monitor still has same probelm.
what's wrong with my monitor? do I need to bring it back to the dealer
what can I do?
Thank for your reply

Hi pachmati,
Welcome to the HP Forums!
I see that you monitor is experiencing some quality issues, and I would be more than happy to help you!
Since the monitor is producing the same problem on different computers, I recommend using this document on Display Quality Issues. This should help in not only localized pixel formations on your screen, but in other areas of concern as well.
If you still see some grids with red coloration, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

Pavilion 23xi monitor - problem with screen going blank

Hello there, Recently, the screen on my 23xi monitor started to go blank after some usage (the time varies). When this happens, the power light on the right corner of the monitor remains lit, however the power button doesn't do anything when pressed. I don't think it's my computer putting it to sleep, since I've already checked my power settings for that, as well as the ones on the monitor's OSD. The only way I can get a video image back is by unplugging and replugging the power connector located on the back. I've had the monitor for only a year and a half. Any ideas? Thanks!

Is there any fix for this please as the exact same thing is happening to me. I've had the monitor 1 and a half years, and for the last week, on either VGA/HDMI/DVI, and connected to either my PC or games consoles the screen will effectively freeze after a given period of time (always after around 20 mins or 30 mins of use). The power light stays lit and can't be switched off, the only way is to unplug from the wall, which is very annoying. According to HP website the 1 year warantee expired in June 2014 so I am not sure what I can do to get this resolved, but a monitor should last more the a year and half, all my other monitors are 3-4 years old and still working.

Hp Pavilion 23xi Underscanning Resolution

I recently purchased the Pavilion 23xi and I loved to picture clarity and quality, but some games such as Crysis Warhead had some image lag issues. I thought there had to be a way to fix this. I went to the HP website and searched for the 23xi and found the Pavilion 23xi driver. After the installation the monitor now underscans the visible image by about an Inch on the top, left, and right sides of the screen. This creates a black border that now spans the full length of each side. I thouhght maybe it was the Catalyst Control Center, but no scaling options are allowed (other than GPU scaling enable/disable). I then thought maybe my VGA cable was the cause, I tried an HDMI cable with no change. I then thought maybe it was the software, hooked up my laptop still no change. My last thought was that maybe a scaling option had gotten ticked on the monitor, I can see a custom scaling option for the monitor but it is not selectable in any form. Also I am running Windows 7 x64 with a Radeon HD 6970. Is there someobody who can help me correct this, please?
This question was solved.
View Solution.

You can test the display by connecting it to a notebook via the HDMI displayport output and using presentation mode to extend the display onto the monitor.
When one starts installing drivers for devices that an OS has for them in its driverstore then things start going wrong.
You really should consider rolling back the display driver installation. Go into system restore and choose the checkpoint that was created when you installed the display's driver. Once you have done that go to the Crysis forums and take a look there to see what others have done to resolve the image lag.
In the future do yourself the favor of not installing a driver for a new display, unless it is a touchscreen or another special type of display. Your Hp Pavilion 23xi display is a PnP (plug n' play) device. That means plug it in and use it. The OS will take care of installing a WHQL driver.
An example of what I mean is in the following image. I have two P n' P displays connected to this desktop PC's video card outputs. I can play any game currently on the market with this PC without low FPS or lags.
BTW, you are better off using the DVI input for games and videos and the display's recommended native resolution. Back away from the old school VGA.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Display problem in my hp pavilion -15e015tx the screen blinks and get freeze for a second

i am using hp pavilion 15-e015tx running window 8 i had complained on 18 oct 2014 regarding the display problem. my case id is 4739018980. till now the issuse is not solved. the engineer came , checked the laptop and said quotation will be send within few days and tookaway his service charges Rs.1400. Still waiting for the quotation .every time i call in hp support service they tell they will send quotation the same day but there is no response. pls send the quotatiom as soon as possible. i am feedup calling hp support care now.
"very bad support service"
"3rd class customer service"

Hi @Poo0507 ,
I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Pavilion 23xi has a very bright backlight and very poor contrast

My Pavilion 23xi has a contrast like screen of cheap price netbook, may be 1:140 may be 1:100.
No any result after all attempt of ajastments:
- no when contrast =100,
- no when contast = 50
-brigtness from 35 to 55 is comfort for me
-gamma off
-dynamic contrast off and on (small difference)
-preset = text
I can see only grey screen, it is not same to black!
On this photo you can see the trouble (white balance of monitor is full correct, some blue copol is only photo's problem)
What can I do without transportation to dealer (I live in Russia, very big country for comfort technical service)
Engineer menu of HP 23xi is very poor, there is not any useful items to reduce the LED emmitance

Hi Yuriry-Spb;
I regret that you are still having difficulties.
I am sending you a link on "Display Quality Issue"click here.
If none of these steps resolved it and it is under warranty I would call technical support..
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Pavilion 23xi 23 monitor product number C3Z94AA - Pink color screen

This EXACT thing just happened to me.
Prior to calling HP support, I searched google and found several incidences of this problem.
I also did EXTENSIVE troubleshooting per instructions found on HP forums prior to calling.
And of course this monitor went out of warranty a couple of months ago - only a 1 year warranty???
I tried the using the motherboards graphics card (VGA) and also tried DVI, VGA & HDMI on the Nvidia Geoforce GTX670- all had the same issue with this monitor using different cables and connections.
I connected another monitor I have (Samsung) and it's displays great without problems.
Tried on both Windows 7/64bit & Windows 8 with all current drivers (checked to see if there were new ones)
This monitor Pavilion 23Xi even shows the discoloration and ghost icons when NO cable is connected to the computer and the monitor is just powered on??!!!
Even though I did all this troubleshooting and explained all of it to the tech rep when I first called she said that she could help me for a charge, but would refund it if she was unable to fix it.
I told her no, I did not want to pay a charge because I was pretty sure after a factory reset, another monitor that works ok, trying three different connection types DVI, HDMI & VGA, two different graphics cards and the monitor doing the same ghost icons/discoloration when it was not even connected to a computer - that is was the monitor.
She put me on hold and said that she got permission to troubleshoot without charging me.
We went thru all the steps I did again, powering off, trying different cables, connecting a different monitor etc and of course after all that she said it was the monitor and I would need to take it into Best Buy or some other store to see about getting it repaired.
I do not know the cost, but if its more than $50, I will probably just buy a different brand monitor that has a 3 year warranty, did not notice (slaps self) that these HP's only have a 1 year warranty when several other brands I bought previously all have 3 years... :-(
I should have went with a different brand to begin with based on my problems with HP inks, printers and prices from the past.
It just started doing this today, but is *very* annoying when you paid extra to get a higher quality image.
I just added an image of dropping to the command prompt, that shows that this HP monitor Pavilion 23xi shows ghost icons and images from previously visited pages if you look very closely.
It's really weird, like the monitor is retaining images in a buffer or memory but a reset, power off, holding down the on/off key for 20 seconds (which tech had me do) does not clear this.

Hello ytran, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your monitor is displaying an unusual pink hue, and I would be happy to assist you in this endeavor! For the discoloration displayed on your monitor, I recommend following this document on Display Quality Issues. This should help return the resolution on your screen back to factory settings. If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl I hope this helps! Best Regards

Connecting HP Pavilion 23xi to a Macbook Pro late 2013

I have just bought a HP Pavilion 23xi monitor as an addition for my Macbook Pro 13in Retina Display late 2013 model. I am wondering and needing to know the best way to successfully connect them both together. Please note I am using the pre-release version of the OS X Yosemite, if that makes a difference which I hope it doesn't.

Yes, I see now. The model number did not register in the old mind correctly. The Pavilion 23xi uses D-Sub, DVI, HDMI for connections. I would recommend the DVI, which means you need " a DVI output using Mini DisplayPort to DVI Adapter (sold separately)" copied directly from the Mac webpage HERE
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

External HP Pavilion 23xi monitor cuts off laptop audio

I want to use my HP Pavilion 23xi monitor as an external monitor for my laptop (Sony Vaio, Windows 7). The laptop only has an HDMI connection, so I used an HDMI cable to connect it. The HP monitor works fine, but when it is connected, it cuts off all audio output on the laptop. There is no sound from the internal speaker on the laptop, or from the headphone connection.
If the HDMI connection automatically takes over the audio output, surely there should be at least a headphone socket on the PC? I can't change the connection type, as the laptop only has HDMI for an external monitor. Is there any configuration change that will fix this?
This question was solved.
View Solution.

Hi,
As you mentioned, the HDMI sound may take over sound, disable HDMI sound may help. Pleae try:
Right click the speaker icon
Select Playback devices
Right click HDMI sound and disable it
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Just bought HP Pavilion 23xi monitor, but no sounds. is there built in speaker?

just bought HP Pavilion 23xi monitor, but no sounds. is there built in speaker? or any HP monitor has built in speaker?
This question was solved.
View Solution.

Hi,
The following link shows its specs:
http://www8.hp.com/emea_africa/en/products/monitors/product-detail.html?oid=5328978#!tab=features
No speaker. Please try the following nice monitor:
http://store.hp.com/webapp/wcs/stores/servlet/us/en/mdp/accessories-88342--1/hp-pavilion-touch-monit...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Pavilion DV8000 display screen shows strips and not visible

My HP Pavilion laptop display screen shows vertical lines - strips and not clear.
Thanks

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Display of your Notebook. We will surely assist you with this issue
1. Please check if the Display/Screen of your Notebook shows lines even in BIOS or not
Note: Power ON the Notebook and keep tapping the F10 Key to access the BIOS
2. Please tilt the Screen/Display of the Notebook slowly towards back and the front side, check and verify
if the lines are seen at all the angles of the display
3. Please connect an external desktop monitor to your Notebook and check if the lines are shown even on the
external monitor
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Quality of new build of HP Pavilion 23xi / firmware issue?

Hi. I bough one HP Pavilion 23xi one year ago and I was very impressed with the image quality. So I bought one recently, but I noticed a difference between them: when viewed from above or side, this latest one has light leaks and a not-so-uniform display of colors, which get washed out more quickly when viewed from other angles. This does not happen with the first one, and it's independant of operating system (tried on Windows 8.1 64bit and OSX Yosemite.
Is it a build quality or firmware issue?
Firmware of monitor 1: RIM111 / 2013
Firmware of monitor 2: RIM232 / 2014
Also the OSD is different between monitors - how can I update firmware RIM111 to RIM232 ?
Thank you.

Hello @bmoreira,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the quality of your new monitor shows light leaks and not-so-uniform display of colors from different viewing angles. I would be happy to assist you in this matter!
I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Wierd lines on my display and frequent lock-ups w/ and w/o display problems

When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.

S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c

Display Problem with RowHeader of a Scroll Pane

Hi,
I am trying to display row headers for a table using another table
Here is the code
import javax.swing.*;
import javax.swing.table.*;
public class RowNumberHeader extends JTable {
protected JTable mainTable;
public RowNumberHeader(JTable table) {
    super();
    mainTable = table;
    setModel(new RowNumberTableModel());
    setRowSelectionAllowed(false);
    JComponent renderer = (JComponent)getDefaultRenderer(Object.class);
public int getRowHeight(int row) {
    return mainTable.getRowHeight();
class RowNumberTableModel extends AbstractTableModel {
    public int getRowCount() {
      return mainTable.getModel().getRowCount();
    public int getColumnCount() {
      return 1;
    public Object getValueAt(int row, int column) {
      return new Integer(row + 1);
}and then
        JTable displayTable = new JTable(...);
        scrollPane = new JScrollPane(displayTable);
        JViewport jvp = new JViewport();
        jvp.setView(new RowNumberHeader(displayTable));
        scrollPane.setRowHeader(jvp);the problem I have is that when a row is selected inside the row header, some rows go blank and you can see the selection is all screwed up. I tried setting the selection mode to ListSelectionModel.SINGLE_SELECTION but that didn't help.
A refresh of the entire screen (minimize/maximize) seems to resolve the problem. I am using jdk1.4.1 in Windows 2000.
Any ideas?
Sylvain

Again the problem is that when you click on the row headers, some row header rows go blank (completely white) so you can't see what they show.
ie say I have table
Row 1 - 1 2 3
Row 2 - 2 4 5
Row 3 - 5 7 7
Row 4 - 5 6 7where Row X is the row header. So for example, if you click on Row 2, you will get something like
Row 1 - 1 2 3
Row 2 - 2 4 5
      - 5 7 7
Row 4 - 5 6 7until the screen is refreshed or you click some other row header.
hmm ok, I added calling repaint on the table whenever a row is selected and at least the display problem goes away; however, the selected indexes from the event don't always match the index of the row selected. I think actually that may be the source of the display problem.
Here is the code I added in the constructor:
        getSelectionModel().addListSelectionListener(new ListSelectionListener()
            public void valueChanged(ListSelectionEvent e)
                System.out.println("Header table selection is: First = " + e.getFirstIndex() +
                                   " Last = " + e.getLastIndex());
                RowNumberHeader.this.repaint();
        });

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

My original post, locked by this forum. Display problem related

Hi G5 Gurus,
The display problem first, we all know when screen savers display, a click on the mouse will bring you back to the active desktop, this was how it worked., but now, sometimes a click cause the G5 to sleep!
As for the sleep, I dare not to put it to sleep these days, because I am afriad it may cause a fire by over heating. Sometmes, actually four times in the past few months, my G5 could wake up by itself, followed by a extrem high speed running of the cooling fan, it sounded like a hair dryer running in the same room. Sometimes the sreen could light up, just like real wake up, sometimes, it was black. No clicks the mouse or keyboeard could bring it back to normal, I had to press and hold the power button to turn it off.
This crazy problem happened for the first time last summer, a dead hard disk was the cost. Apple replaced it, but failed to detect the cooling or power or display problem. I was given one month extended free service, but right after its end, the problem was back and happened even more often.
Please let me know if any of you had the same problem and please advise what to do.
100s Gs of thanks.
Songyan
iMac G5 Mac OS X (10.4.8)
la teller
Posts: 1
From: Los Angeles
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 10, 2007 2:21 PM in response to: Bad luck G5
I have the EXACT same problem. In fact, I could not have described it better myself. What gives? I brought it in to the "genius" bar and they repolaced the power supply free of charge but the problem is still there. I noticed they ordered a new logic board but did not end up replacing it after all. Did you have yours replaced and did it work? Is this a known issue?
imac G5 17 inch Mac OS X (10.3.9)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 11, 2007 1:20 PM in response to: la teller
Hi La teller,
Thank you for your reply. The 'genius' here in London only replace the dead hard disk, which I belive was a victim of this problem. I was told they couldn't find anything wrong with the power supply or the cooling system.
Now at lest I know I am not the only bad luck guy. Let's wait and see if others are having the same problem. I am not sure if this is a known issue to Apple, even if it is, it may take years before they can offer a recall or free repaire. I noticed that some G5s have already been suffering from power problems and a free repaire was offered.
Thank you again and hope Apple can take our concerns into their consideration soon.
Songyan
iMac G5 Mac OS X (10.4.8)
stopha6
Posts: 1
From: US
Registered: Jan 12, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 12, 2007 7:43 AM in response to: Bad luck G5
Hello,
I'm also having this problem (fan running, won't come out of sleep), just spoke with an apple care rep. He confirmed my suspition that it was software, not hardware as I have just had the logic board and power supply replaced.
His suggestions were to:
1. Run disk repair from the startup CD
try running OS X from a firewire drive and see if the same behavior happens or
perform and archive and install.
When the fan starts to run like that it means the OS is not communicating with the hardware properly. The OS could be somewhat corrupt if you were having hardware issues beforehand, hence the need for a reinstall. I will be performing an archive and install after the disk repair, I'll let you know if it fixes the problem!
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 12:52 PM in response to: stopha6
Hi Stopha6,
Thank you for your message. I never imagined it could be a software issue, cos it looked so hardware.
Please keep me updated with your progress.
By the way, as I said in my old posts, a hard disk went dead when this happened for the very first time, how do you read this?
Thank you.
Songyan
iMac G5 Mac OS X (10.4.8)
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:58 AM in response to: stopha6
Hi Stopha6,
After reading your reply again, I realized that the system had already been reinstalled. As I said when it happened for the first time, the hard disk died with it, which was replaced, of course with a new OS X, but the same problem is still happening. May this suggest that it is not just a software problem? Thank you. Songyan
iMac G5 Mac OS X (10.4.8)
AG-Nate
Posts: 5
From: Pismo Beach,CA
Registered: Aug 26, 2006
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 14, 2007 3:38 PM in response to: Bad luck G5
The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on. The screen-saver and sleep problem you describe sounds like something that may just happen on accident. But this sounds mostly like a software problem. Try making sure to always quit all non-apple products and see if anything changes.
eMac, iMacG5 Mac OS X (10.4.7) 800mhz 1gig ram, 2ghz 2gigs of ram
Bad luck G5
Posts: 8
From: UK
Registered: Jan 10, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 15, 2007 6:50 AM in response to: AG-Nate
Thank you, Ag-Nate. I will try as you adivised but I con't think the fans were activeted my intensive CPU using. In most of the cases, the problems happened when the Mac was sleeping, when the minimum CPU were being used.
iMac G5 Mac OS X (10.4.8)
Timothy Klein
Posts: 15
From: Denver, CO, USA
Registered: Dec 6, 2004
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Jan 31, 2007 1:02 PM in response to: AG-Nate
"The Fans going at full is only because you have an application that is using a lot of cpu power and therefore causing the imac to heat up so it turns the fans on."
That's only partly right. A hard-working process will make the fans run at high speed, of course.
But, the OS is in touch with the firmware of the iMac, telling it how to run the fans, based upon information the OS X kernel is getting about the state of the hardware.
If the firmware loses touch with the OS for some reason, and is not getting instructions on how to run the fan, it will default to running them at full blast, to be on the safe side (and this "full blast" fan mode is way louder than anything you'll generally experience during normal usage, I know from experience).
So it may not be so simple as a hard-working cpu process kicking the fans on.
iMac G5 17" 1.6 GHz Rev. A Mac OS X (10.4.8) 1 GB Ram
Kensall
Posts: 2
From: London, England
Registered: Feb 2, 2007
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 9:05 AM in response to: Timothy Klein
Hi I have a 20" G5 imac it's about 18 months old and I am having the same problem, It freezes and the fan runs really loud. It's nothing to do with software as my I.T. guy has done a complete re-install. All of our admin people have imacs of differring ages and the flat panels are all OK but every one of the G5s has had a booting problem. Some fell into the recall for replacement logic boards but the one I have at home is the newest and doesn't. I'm waiting for my apple reseller to get back to me, but it looks like it's the logic board and as none of the serial numbers fall into the recall, I'm expecting a big bill. I'm really disappointed as I've been a professional apple user for over 15 years and have grown to expect a certain amount of honesty and integrity from them. Looking at all of the discussion boards and the amount of people complaining of the same problem the logic boards are defective and apple should be replacing these free of charge.
i mac G5 Mac OS X (10.4.8)
a brody
Posts: 15,170
From: Silver Spring, Maryland. Don't forget to backup your data!
Registered: Dec 23, 2000
Re: What's the problem? Display? Power supply? Cooling? My G5's gone mad
Posted: Feb 2, 2007 10:27 AM in response to: Kensall
Kensall,
Welcome to Apple Discussions!
As in the other thread I wrote:
Being from England, you may find the repair program under these pages:
http://www.apple.com/uk/support/imac/repairextensionprogram/
http://www.apple.com/uk/support/imac/powersupply/repairextension/
Check both of them as they refer to different models.
If neither of yours is under the program, please start a new topic thread so someone can help you.
http://discussions.apple.com/forum.jspa?forumID=881
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.
iMac C2D 2.17/20 inch/iMac G5 1.8 1st gen/iMac G4 800 Mac OS 9 Mac OS X (10.4.8) EyeTV 200, Canon PS A530 , Epson P-R220, iSight, Airport Extreme, 5th Gen iPod

I am having a very similar problem. My G5 imac has already had the logic board replaced from the leaking capacitor problem. 8 mos. later the power supply was replaced under the second recall program when it failed to start up.
It had been working now for almost a year, when about 3 mos. ago I started to experience the sudden dimming effect - if the display was untouched the screen would dim about 30% similar to a laptop in energy save mode. I checked and none of these types of options were set in the pref panes. At the same time I would have the iMac go to sleep after a while from non-use, and then when I tried to wake it it would stir for a few seconds and then go right back to sleep. It took 2-3 attempts to wake it up.
Then last week, as I tried to wake it, it just shut down instead completely. I had to hold the power button down to recycle it to get it to come back to life (3 times).
Today was it - I found what I thought was a sleeping iMac, but it will not power up at all. I opened the back cover and the power supply is working, but I cannot get the board to energize, I reset the PMU, but the #2 LED won't even blink. It is completely dead.
Basically every time I used this computer I held my breath that it would not work. After 2 recalls I still only get 9 mos. out of it? Apple is really starting to show it is like the "big" computer makers, the quality is going right down the tubes.
iMac G5 Mac OS X (10.4.4)

Pavilion 23xi - display problems

Similar Messages

Maybe you are looking for