Payment for  material based on performance

Dear Experts and MM Gurus,
my requirement is explained below.
1.Material is received and goods receipt is made . initially Payment is made for Excise Duty only.
2. Material is posted to Stock with out any Value.
3. Payment of material is based up on performance ,i.e number of heats it can with stand.
eg: in po mentioned order is for 5000 Heats and cost per heat is 500 rupees. material code and ordered quantity is mentioned with Value . But This Value is used for only Excise Payment. Further invoices are paid based on performance report.
Part payments are done based on the performance Report i.e number of heats material has acheived.
how to work on this scenario.
suggestions / comments are recommended.
Thanks in advance.
regards,
injeti.

Hi Sp
the following reports help you for the requirement you asked
Material Analysis(SIS) - MCTC
Material Analysis(SIS) - MCTC
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
In these following reports you can enter the material you need and the division and once you execute, sysetem will give the output of that material on the basis of the division
Reward if useful
Regards
Srinath

Similar Messages

  • ABC analysis for material based on the volume of sales

    Hi,
    Can we have an option of categorising a material according to the sales volume and generate reports.
    Eg;
    Mat1 -Class A >Rs 100000 of sales
    Mat2 -Class B >Rs 50000 of sales
    Mat3 -Class C >Rs 25000 of sales.
    Awaiting your valuable inputs.
    Regarsd,
    Phani Prasad

    vamsi krishna wrote:>
    > Dear Friends,
    > Please mail to me how to configure the availability of material based on the shipping conditions?
    > That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The system should automatically give the availability of the material based on the shipping conditions we give in the sales order (va01).
    > With regards
    Hi Vamsi,
    Could not understand your query fully.
    See material availability check is carried out for the requested delivery date or else the system proposes one.
    The time you are talking about By Air 1 day and so on is not taken into consideration while carrying out material check for that is transportation time after goods are released from the Plant.
    owever if you need to configure the transportation time you need to go to
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define shipping types
    Here you can define shipping types what you said by AIR by Truck or whatever you need.
    To specify the time you need to go to SPRO
    Logistics Execution->Transportation->Basic Transportation Function->Routes->Define Routes-> Define Routes and Stages
    Here you specify the Transit Duration Transit Lead time and so on which will be taken as a input for determining material lead time by that shipping type.
    Hope it helps.
    Post if u need furthur clarifications.
    Request you to reward points if helpful.
    Thanks & regards
    Abhishek Swarup

  • How to calculate the Processing time for material based on its route ?

    Hello experts,
    I would like to calculate the Scheduled in-house production time based on route.
    Actually this is done in the prod. route in tcode CA02. (via menu Extras => scheduling => schedule).
    After getting the schedule table press the 'scheduling results' button I received the Processing time, Setup and teardown time,... Scheduled in-house production time.
    So I'm looking for a function or any tool to use it in report.
    thanks,
    Eli

    hi,
    from routing screen,extras>scheduling>schedule(give a variant name)>scheduling results>update material master.this writes the info in the temp file.use tcode CA96 to update material master.this updates lot size dependent in house production time in work scheduling view of material master and  deletes the lot size independent inhouse prod, time in MRP2 view.this tool gives more accurate results  for your  inhouse prod. time.
    > Hello experts,
    > I would like to calculate the Scheduled in-house
    > production time based on route.
    > Actually this is done in the prod. route in tcode
    > CA02. (via menu Extras => scheduling => schedule).
    > After getting the schedule table press the
    > 'scheduling results' button I received the Processing
    > time, Setup and teardown time,... Scheduled in-house
    > production time.
    > So I'm looking for a function or any tool to use it
    > in report.
    >
    > thanks,
    > Eli

  • Partial Payment (with invoice reference) for Invoice-based items

    Hi Gurus,
    I'd like to make partial payments to credit memos while "Include partial payment" is activated.  However, if i activate "Include partial payment, partial payments for invoice-based items are no longer possible (partial payment amount is displayed only, and full amount is automatically applied).
    My credit memos were posted via BAPI_ACC_DOCUMENT_POST.  I've read that when using BAPI, invoice reference field is automatically populated with "V".   
    Can you please enlighten me what is SAP's logic behind this.  How does SAP determine invoice-based items?  And is there a workaround so I could still make partial payment while it is activated?  Thank you.
    Regards,

    Hai Dianne,
    Check it once OBA4 & OBA4 t.codes both are Tolerance Group
    Regards
    Madhu I

  • Q. M PROCUREMENT-PAYMENT TO VENDOR  BASED ON INPSPECTION RESULTS

    Hi GURUS,
    My Client requirement is that payment for material procured from vendor should be based on quality of material.
    For example: My client procure Ferro Alloy from a vendor,quality specs for this material is  60%.if after inspection quality of material is e.g 58%.then according to this diiference in quality the vendor should be paid less.After we do RR and UD.based on the quality of product the Accounts Department should automatically know that there was change in the required quality and the vendor should be paid less.Is it possible to calculate the value to paid to the vendor by the system automatically by maintaining certain formulas.
    Thanks and Regards
    Ramkumar

    Hi Ramkumar,
                            You can generate a Z Report with the help of your ABAPers and there you can define the formula what you are asking to calculate on the basis of Quality. The logic of formula may be like if Purity is 60% then it will be 100% money & if it is less then the formula will calculate the value accordingly on the basis of Quantity & purity results.
    Please revert me the findings after consulting to your ABAP Team.
    Regards.
    Edited by: ATUL MITTAL on Oct 20, 2008 7:54 AM
    Further this report will be run by your account personnel and they will know the price deductions on the basis of Quality along with all other related informations.
    Thanks

  • Key performance indicators (KPI) for material creation

    Dear all,
    I need to define some Key Performance Indicators (KPI’s) to measure the data quality during the material creation (MM01) process. The objective is to get concrete statistics about data quality/accuracy for fields related to material from all views created with MM01 (basic data, classification, unit of measure...).
    I would like to get your expertise on how to measure these KPI’s : which transactions, table (...) to use ?
    I have already few ideas :
    -Table CDHDR
    -Transaction MM04
    -Create “checkpoints“ into the workflow for material creation (ZWF01)
    Do you have any other idea in mind?
    I am open for all advices: transaction, table, process, approach…
    Thanks in advance for your help !

    I have a few ideas, but the accuracy of the master data is based on your system config.
    Some things that are helpful in most of the cases:
    - If material type is HAWA (trading goods) your procurement indicator should always be External procurement (check those for other material types if you have it uniformed). You can also check purchasing group based on material type if you have it distinct by material type.
    - Check if sales views are opened in all org.levels
    - Check if storage loc.views are opened for all SLoc
    All in all, you need to have a link of two or more data in material master to be able to check it in some way automatically, otherwise you won't be able to determine if the data is correct or not.
    E.g. How would you every know if lot size of 120.000 PCS is OK or not for a specific material or if you need to assign a specific purchasing group to your material.
    You know the logic behind your material master data best so you can create the best rules to check for your KPI.
    Regards.

  • Urgent issue REPORT FOR ALL MATERIAL BASED ON STOC TYPE

    Hi
    I want report for based on stock type
    i want to check the stock for all mterial with  stock type "quality inspction"
    i want that type of material documents
    is it possible to see the report
    regards sesidhar

    I CREATE material A...with out seleting QM view
    I create one more material B.... with select QM view
    both r ROH material type..
    when i caeate GR for material A. with stoc type 'QYALITY INSPECTION.. for this material system does not creat quality LOT....
    when i create GR for material B with stock type 'QYALITY INSPECTION.... for this material system created lot..
    but are GR done by 101 movement..
    but i want report for materials which are stock type QI...but does not display Material which r lot created...?
    is it possible..
    regards
    sesidhar

  • How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

    Hi All,
    How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
    Assume Material is Pen.
    While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
    Kindly help me out.
    Thanks,
    Renjith Jose

    A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
    Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
    "Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
    hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
    Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

  • Different GL Account for WRX - based on Valuation Class (No Material Master

    Hi Gurus,
    My scenario is as given below.
    1. We do not have any Material Master. We create short text PO's with account assignment category "P".
    2. We are also using Material Group in our PO. We have one Material Group for Domestic Purchases (say M1) and another Material Group (say M2) for Import Purchases.
    3. We have assigned valuation class say 3100 for Material Group M1 and valuation class 3101 for Material Group M2.
    4. Our plant is say RBUP and our valuation grouping code is say 0001 which is assigned to the same plant.
    Objective:
    While doing MIGO we want to have different GR/IR Account for domestic purchases say 108 and different GR/IR account for import purchases say 109.
    Issue:
    1. In OBYC setting GR/IR account is picked from transaction key WRX.
    2. Our entries in WRX are as given below for our Chart Of Accounts say DMN.
    Valuation Modifier Valuation Class GL Account
    0001 108
    0001 3100 108
    0001 3101 109
    3. But even when i am creating the PO with Material Group M2, it is not picking the GR/IR account 109, based on the valuation class i.e. 3101 which is assigned to the Material Group M2.
    Query:
    1. How can I achieve my objective of selecting GR/IR Account 109 for Import PO's and GR/IR Account 108 for Domestic PO's.
    Pl note we will not be maintain material master.
    Will give full 10 points if anyone can help me reslove this issue.
    Pl also do not waste any of your valuable time to address the account assignments for BSX or GBB-VBR. I am fully aware that in VBR this differentiation is possible.
    Rgds,
    Prasad.

    I suggest you to create a Dummy Materials. Lets say,
    material number: 1001
    enter material description as Domestic
    material number: 1002
    enter material description as Imports
    and in OBYC for GBB
    make the following settings:
    val grp      gen mod    val cla      gl a/c dr     gl a/c cr
    0001     VBR     4000     74180040     74180040
    0001     VBR     4001     78020091     78020091
    so that when u create PO u can get default GL (consumption GL )  for the material (u can use the same for material group also) and u can maintain WRX acc determination as follows ..
    val grp   val cla    gl a/c dr   gl a/c cr
    0001      4000     123456     123456
    0001      4001     456789     456789
    Thus u need to create 2 different valuation class for these material group specific and in PO while entering the text u can add the text which is displayed along with material description
    hope this helps

  • AP Payments Manager to perform payment for AR Refund / Return

    Hi,
    I have performed a return in AR and now would like to make the payment in AP Payments Manager.
    However, I found out the the AP invoice will not appear in Payments Manager straight away after the return is done. It will only appear on the next day.
    Is there any concurrent program that I can run to make it available in Payments Manager immediately after I perform the return?
    Or are there any other detailed methods to perform payment in AP for AR returns?
    Please advise.
    Thanks.
    Regards,
    Adibah

    Hi,
    I have performed a return in AR and now would like to make the payment in AP Payments Manager.
    However, I found out the the AP invoice will not appear in Payments Manager straight away after the return is done. It will only appear on the next day.
    Is there any concurrent program that I can run to make it available in Payments Manager immediately after I perform the return?
    Or are there any other detailed methods to perform payment in AP for AR returns?
    Please advise.
    Thanks.
    Regards,
    Adibah

  • PO Release Strategy - Only for non material based

    Experts,
    I have a requirement to implement a release strategy for a single plant for POs for NON material based purchases ( only for using account assignments, cost centers etc).
    The release strategy I configured is working only for the specific plant I want... However, it works whether its a material based PO or a non material based PO.
    How do i get the strategy to work for only the service based purchases, and not the material ones?

    Thanks for the replies but I'm not sure if they are applicable...
    I did create a characterstic for item categories and added the one's I wanted to have... I did NOT include a blank because i thought that would make the difference between the material based PO and non PO. When we I create Po with material (even with no account assignment) it still goes through release.
    Any reason why that is?
    I dont believe the material group solution will not work either because we require material group for material and non material based POs..
    Side note - when i try to use CEKKO with KTTNP, i get a "KTTNP does not exist error." So i used EKPO - KTTNP... hopefully thats ok, but please let me know if its not.
    Edited by: farmerj3 on Jan 30, 2012 3:36 PM
    Edited by: farmerj3 on Jan 30, 2012 3:39 PM
    Edited by: farmerj3 on Jan 30, 2012 3:48 PM

  • I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information.  Im based in Japan but my card is registered to a UK address.  the fields only allow for a Japanese style address and postco

    I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information.  Im based in Japan but my card is registered to a UK address.  the fields only allow for a Japanese style address and postcode.  What can i do to complete the payment and get photoshop!

    As far as I know, your registered location and your credit card information must match... but,
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • CO88-Error :Perform the planned price change for material

    Hi Experts,
    While running CO88 i get this error. "Perform the planned price change for material ". My material is manage at S and it doesn't have any marked cost. The status is FR and no other status on cost etimate for the article are active. what i shoul do? why if i run the PP order with KO88 i don't have any error?
    Please help i'm facing the closing period.

    Hi,
    If dynamic price change is active in your system the first posting in the new period of this material tries to
    - release a future cost estimate of that period OR
    - change the price to the future price in accounting view
       (if the future price date is reached)
    Unfortunately this dynamic price change does not work in order settlement. Therefore you are asked to perform the price change first by t-code CKME (or CK24).
    If you are using price determination control 3, any price change or release should always be the first transaction in a new period to avoid any inconsistencies.
    The dynamic price release will only release the price with transactions which involve material movement and this is not the case by posting invoices and order settlements.
    if you are in period 12/2009 then a settlement in 12/2009 does not require the release cost estimate of 01/2010.
    But if you are already in 01/2010 therefore settlement in 12/2009 is a posting into the previous period. This will change also data of the current period. Therefore the cost estimate has to be released first.
    Another option, if you don't want to receive this message, would be to change this message from Error to Warning (check note 434752).
    Please follow the following steps:
    T-CD:OMRM
    Message M8 394
    =>you set the message type to '-' for error message M8394, that means no message is to be issued.
    regards
    Waman

  • DMA Performance Improvements for TIO-based Devices

    Hello!
    DMA Performance Improvements for TIO-based Devices
    http://digital.ni.com/public.nsf/websearch/1B64310FAE9007C086256A1D006D9BBF
    Can I apply the procedure to NI-DAQmx 9? These ini-files dont seem to exist anymore in the newer version.
    Best, Viktor

    Hi Viktor,
    this page is 7 years old and doesn't apply to the DAQmx.
    Regards, Stephan

  • How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA.

    How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA. I have another tool that puts data into HANA, So don't want to reload this new data into Lumira every time I want to run a report.
    so do i  have the ability to create polished ad hoc dashboards, reports, infographics and storyboards Apart from Ad-Hoc reports, I also need a dashboard with some fixed reports that update with the live data.
    So please suggest me to accomplish this task.
    Thanks and regards
    Shashi kiran

    Please have a look at Ludek's document here which contains links: SAP Lumira Family Supported Versions Matrix
    Ludek has also attached the PAM's as zipped files; Lumira comes in many flavors so I encourage you to research options
    Also see this "HANA Live" document: [SAP HANA Academy] Visualized: Lumira & HANA

Maybe you are looking for