Payment is successful and status is in delivered s...

Hi Skype team,
I have subscribered to india calling monthly pack for 800 minutes and i see the order is in delivered state, but i cannot see the subscription in my account. When i make a call it informs you dont have enough credit.
I also wanted to know if i subscribe a monthly package to call INDIA do i get the live chat or email support.
 i tried to access live chat support and i dont get like continue support request link.
regards,
Ravikumar N

 ra4u12 wrote:
1. I have subscribered to india calling monthly pack for 800 minutes and i see the order is in delivered state, but i cannot see the subscription in my account. When i make a call it informs you dont have enough credit.
2. I also wanted to know if i subscribe a monthly package to call INDIA do i get the live chat or email support.
Hello,
1. please contact Skype customer service
2. You are entitled to e-mail support only.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

  • Outbound idocs getting 2 mdn messages (status 14 *success* and 15 *unsucces

    Hi Experts,
    We experienced an issue with Seeburger AS2. We experienced in one of our scenarios when we are receiving 2 MDNs per single outbound transaction, 1 successful and the other unsuccessful. Both MDNs holds the same DOCNUM.
    Has anyone experienced this before? By looking through our past issues I can see that we experienced this before in XI. We are now using PI 7.1 and has experienced it again.

    I finally fixed this!  Somehow my user account only had Read permissions on the /Users/MYNAME/Library/Adobe/ folder.  I gave myself R+W permissions and everything works.

  • BPM sync-async bridge returns status "to be delivered"

    Hi experts!
    I have a BPM consisting of the following steps:
    1. Receive (open S/A bridge): Msg SalesOrder
    2. Transformation: create Msg SalesOrderResponse
    3. Send (close S/A bridge): SalesOrderResponse (to sending system)
    4. Send (async send): SalesOrder (to receiver system)
    RWB shows 4 messages when the scenario is executed:
    Sender - BPM
    BPM - BPM
    BPM - Sender
    BPM - Receiver
    The BPM works in that both the sender and receiver system receives the expected messages (SalesOrderResponse and SalesOrder), but the RWB returns the status "To be delivered" for the message from Sender to BPM and from BPM to BPM.
    SXMB_MONI shows one message only, which is successful, and the PE_ADAPTER shows the BPM as completed.
    Do you know why the status is "to be delivered", when the messages are received correctly at both sender and receiver system?
    How can we make all messages involved in the scenario successful?
    Thank you very much for any help!
    Br,
    Kenneth

    Thank you, but I have already re-created all interfaces and the BPM in IR, and reimported to ID. I do not get any error messages anywhere, SXI_CACHE is OK (return code 0 for BPM), SWWL contains no old processes.
    Another maybe useful piece of information:
    the two messages returning "To be delivered" status in RWB both exist for Integration Engine. The first, for Sender -> BPM, the inbound channel is AENGINE and outbound channel is SA_COMM. Could it be that SA_COMM does not notify AENGINE that it has received the message?
    The other message with the same status is from BPM -> BPM, with message interface SalesOrderResponse_ABS both for sender and receiver, which I don't understand why. This interface should only be used from BPM to sender... There is no inbound or outbound channel specified for this message.
    So is the BPM sending some information to itself through the same message interface?
    Any clues?

  • IDOCs not created for Payment method "P" and "B"

    Dear Experts,
    I have executed the Automatic Payment program for three payment methods (P,V and B - Foreign Currency) in one Run ID. Payment run was successful but it has created IDOCs for the documents / Vendors attached with payment method "V" but IDOCs were not created for the payment methods "P" and "B". I have checked the configuration relating to payment methods and those were assigned with Form details and the maximum amount is also defined in the payment methods.
    Can any one suggest me where I had made the mistake / where I need to check the configuration settings.
    Thanks a lot.
    Regards,
    Ramnath.

    Hi Surya,
    Please find below error log created while executing the Payment run for the issue.
    Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000116195, user ID V-PIZHA)
    Step 003 started (program RFFOEDI1, variant &0000003957078, user ID V-PIZHA)
    Maintain an output device in your user master record
    Job cancelled
    Thanks and Regards,
    Ramnath,
    SAP FIMM Team

  • IDOC confirmation and status change ???

    SAP friends,
    I have a question about IDOCS. We are implementing. In AP after processing payments, our bank will send us a text file which will have idocs number. and status number ( accept and reject).
    We have to update that status number for our idoc in the system and if the number that was rejected we have to send an email to everyone. How can we change the status of idoc using the file the bank sends us.
    Thanks,
    Kavita Reddy

    Hi,
    Please explain the process detaily.  question is not clear.
    IDOCs are the intermediate documents, which carry information from SAP to Legacy or vise versa.
    IDOCs will be distingwished by message type. These will generate by Program.  In program please check about the status.
    Thanks
    Kalyan

  • Making an order payment using SecurePay and Paypal Standard gateway by API call-Order_PaymentProcess

    PART_1
    ==================================
    Hi,
    I'm working at third party system which by API communicate with BC and in short:
    1) create an order with specified products for specific customer) etc. at BC account ofcourse (works fine)
    2) Make the payment using one of the payment gateway (defined in BC Payment gateway section)
        a) SecurePay, or (works fine)
        b) Paypal Website Standard (problem)
    I found a litttle problem in API call to make the payment using paypal website standard (to be presice in case of Paypal option actually the user should be moved to the paypal website so the system should generate some link i think which will have some data which identify payment for specific order). I tried to use the Order_PaymentProcess (https://worldsecuresystems.com/catalystwebservice/catalystcrmwebservice.asmx?op=Order_Paym entProcess)
    call but it looks it can't be done?
    Please note the payment with this call using credit card details cause successfully use the SecurePay Payment gateway. Is here anyway who know the trick how to force (and what parameter should be used) to
    make the payment using Paypal Website Standard?
    And Yes I tried to obtain some additional documentation from BC support but without success (They said they are working at the new version of it... about 2 years ago they said they probably will prepare more detailed documentation ).
    ==================================
    PART_2
    In case if there is no possible to use the API call to force using the Paypal Website Standard is there any workaround of this?
    I mean is it possible to move the user to the paypal site but in post data set some value which can be handled directly by the BC after making the payment at paypal site, so the BC then could for specific order automatically register this operation after paypal send the successfull payment notification?
    ==================================
    PART_3
    The third part is the question how to force by API call BC to send the invoice to the customer after the order will be created (and before making the payment).
    The invoice is actually created only when the Order_PaymentProcess call will be finished with success (and the option "emailInvoiceToCustomer" will be set to true).
    Is there any way to do that?
    ==================================
    When You will answer please set note of what part is that answer.
    Thanks for advice!

    Dude, I don't know what you're saying. There's too much text and too much code, and the code is unformatted. When you post code, please use[code] and [/code] tags as described in Formatting tips on the message entry page. It makes it much easier to read.
    However, based on the subject of your post, there's one thing I can say: If your key's state changes in a way that can affect the value of its hashcode, then you'll have to remove and re-add that key/value pair. Since the hashcode determines which subset the HashMap searches though to find your key, if your key doesn't have the same hashCode it has when you put it into the map, then the map will search the wrong bucket for your key.
    If that doesn't help, please try to provide more concise, formatted code and a more concise explanation of the problem.

  • Why can't i successfully put in Paypal for the itunes store....have tried numerous time and get success and then unsuccessful

    I want to get 2 updates iPhoto and iMovie that are available and can't get past the requirement to add a payment source.  I've gone through the process several times and will get a successful and then unsuccessful.  The 1st note I get is that it hasn't been used for the iTunes store, which I never use....so frustrated.

    Problem resolved. Learned from a tech that I could choose "none", which is grey in the choices.  Did that and was able to then get my available free updates.  I didn't want to set up a prepaid account and didn't have to.  Seems to be a glitch in the system but I'm done with that on.

  • Simultaneously successful and in-progress deploy

    I deployed an app to two devices. Both PCs installed the application successfully, and the app is fully usable on the client side. However in deployment status I see the two PCs under the Success tab, but I also see the two PCs under the In Progress tab.
    The message under the In Progress tab is "Waiting for user session reconnect". I have logged into both PCs and restarted them, force updated their machine policy and application deploy policy and the message persists.
    Any ideas about how I can resolve this issue and prevent it from occurring in the future?

    No errors that I can see.  
    <![LOG[+++ Starting Install enforcement for App DT "Bluebeam Revu x64 12 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, Revision - 2, ContentPath - C:\Windows\ccmcache\2, Execution Context - Any]LOG]!><time="15:40:01.680+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:1702">
    <![LOG[ A user is logged on to the system.]LOG]!><time="15:40:01.682+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2083">
    <![LOG[ Performing detection of app deployment type Bluebeam Revu x64 12 - Windows Installer (*.msi file)(ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, revision 2) for system.]LOG]!><time="15:40:01.683+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2148">
    <![LOG[+++ MSI application not discovered [MSI Product Code: {81D4867E-366F-4F34-A1C2-DF819B7BCF00}, MSI Product version: ]]LOG]!><time="15:40:01.683+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="msihandler.cpp:131">
    <![LOG[ App enforcement environment:
    Context: Machine
    Command line: msiexec /i "Bluebeam Revu x64 12.msi" /q
    Allow user interaction: No
    UI mode: 1
    User token: null
    Session Id: 4294967295
    Content path: C:\Windows\ccmcache\2
    Working directory: ]LOG]!><time="15:40:01.684+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:85">
    <![LOG[ Prepared working directory: C:\Windows\ccmcache\2]LOG]!><time="15:40:01.684+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:189">
    <![LOG[Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe]LOG]!><time="15:40:01.685+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="executility.cpp:188">
    <![LOG[ Prepared command line: "C:\Windows\system32\msiexec.exe" /i "Bluebeam Revu x64 12.msi" /q /qn]LOG]!><time="15:40:01.686+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:338">
    <![LOG[Valid MSI Package path = C:\Windows\ccmcache\2\Bluebeam Revu x64 12.msi]LOG]!><time="15:40:01.699+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:765">
    <![LOG[ Advertising MSI package [C:\Windows\ccmcache\2\Bluebeam Revu x64 12.msi] to the system.]LOG]!><time="15:40:01.700+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcommon.cpp:125">
    <![LOG[ Executing Command line: "C:\Windows\system32\msiexec.exe" /i "Bluebeam Revu x64 12.msi" /q /qn with system context]LOG]!><time="15:40:03.112+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:201">
    <![LOG[ Working directory C:\Windows\ccmcache\2]LOG]!><time="15:40:03.112+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:215">
    <![LOG[ Post install behavior is BasedOnExitCode]LOG]!><time="15:40:03.114+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcommon.cpp:1094">
    <![LOG[ Waiting for process 4980 to finish. Timeout = 120 minutes.]LOG]!><time="15:40:03.115+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:1958">
    <![LOG[ Process 4980 terminated with exitcode: 0]LOG]!><time="15:40:55.997+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:1967">
    <![LOG[ Looking for exit code 0 in exit codes table...]LOG]!><time="15:40:55.997+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:505">
    <![LOG[ Matched exit code 0 to a Success entry in exit codes table.]LOG]!><time="15:40:55.997+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:584">
    <![LOG[ Performing detection of app deployment type Bluebeam Revu x64 12 - Windows Installer (*.msi file)(ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, revision 2) for system.]LOG]!><time="15:40:56.002+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2148">
    <![LOG[+++ Discovered MSI application [AppDT Id: ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, Revision: 2, MSI Product code: {81D4867E-366F-4F34-A1C2-DF819B7BCF00}, MSI Product version: ]]LOG]!><time="15:40:56.003+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="msihandler.cpp:127">
    <![LOG[++++++ App enforcement completed (54 seconds) for App DT "Bluebeam Revu x64 12 - Windows Installer (*.msi file)" [ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06], Revision: 2, User SID: ] ++++++]LOG]!><time="15:40:56.003+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2448">

  • Broken success kit status

    This is my second success kit status received like this:
    http://imageshack.us/photo/my-images/849/sdc13008c.jpg/
    http://imageshack.us/photo/my-images/18/sdc13011y.jpg/
    Now i want to know, how is this possible? I know they are sent via DHL Global Mail, but it's the second time i raised a SR for this "broken" success kit (last year i've had one identical, broken), and guess what.. the OCP Team asked me to confirm that my address (shipping address and e-mail address) are correct, even if the address is unchanged, 100% correct and has nothing to to with the real problem (you see, the pack - and also the diploma - is broken).
    I'm from Romania, and i'm sure this happens outside the Romania, i've asked the local DHL and they told me they received the pack broken, from outside..
    Anyone who has encountered this so far?

    I'm not sure how this could happen, but you can contact Oracle Certification Support and ask for a reship. It looks like something that has happened as the envelope has been sent through a marking machine at a mailing facility. I'll send these pics to our fulfillment team to see if they can help determine the problem, but once the kits are packaged, they don't go through any additional processing at our facility, they are picked up by DHL and processed further.
    When you contact Oracle Certification Support, go ahead and indicate that you have already confirmed your address in your Pearson VUE profile and that it is correct. Any time a candidate contact OCP support for a certificate reship, they request address confirmation. You'd be surprised at how many addresses are not correct, so we ask for confirmation as often as possible. They will also send you a soft copy of your certificate, which you will receive right away. Sorry that you'll have to wait on another certificate. Hopefully this one will come undisturbed.
    Regards,
    Brandye Barrington
    Certification Forum Moderator

  • Profile picture and status bar don't appear in Game Center

    I first signed up for Game Center when it was released in the days of iOS 4. I used my iPod Touch 2nd gen. There was no status bar or profile picture, but I didn't realize because I was new. I later changed to an iPhone 3GS when iOS 5 was released, and the iPhone was restored to the backup of my iPod Touch. After my iPhone was fully functioning, I retired my iPod Touch. I noticed then that I was missing the profile picture and status bar because my Game Center friends had them. In December 2011, I bought myself an iPad 2 Wi-Fi. Still, no profile picture or status bar. I am confused, because my iPhone and iPad are running the latest version of iOS, 5.1.1. I have done plenty of troubleshooting, with no answer. Please help me.

    Yeah, my internet is on and working too. I have been looking in to this issue- I have emailed Apple to make them aware. It seems like it is affected most, if not ALL tbe Game Centers on 2nd Gen and from what else I've heard, 3rd gen devices too. Whether this is intentional I don't know- it seems odd that everyone has suddenly been disconnected from their games tab on Game Center older devices, so perhaps it is a ploy by Apple to ensure more people switch to a newer device? We'll see. For now, I would recommend you follow the posts I've put up previously too. See my profile for my contributions.
    Thanks, and add me on Game Center if you like.

  • I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

    IS THE SITUATION HOPELESS
    I used Target mode to transfer files to a new i7  iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
              Please tell me how to get this disc to eject !

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • How do I view the Horizontal Scrolling bar and status bar at the bottom of the screen. I can only see the top menus, toolbars and vertical scroll bar?

    Before the most recent upgrade, the bottom horizontal scrolling bar and status bar appeared on my screen. Now since upgrading, I cannot see the. Anyone ideas how to restore them?

    If you haven't already, you could force-quit Quicktime by using the menu option from the desktop (finder) and choose Quicktime.
    Not sure what you have frozen on the screen, be it a failed movie, or some unusual screen shot. If you can find by date (created) you may be able to look for .mov or quicktime suffix name or other video file content to delete it.
    And you may have to restart your computer and perhaps run repair disk permissions from Disk Utility's first aid on the hard disk drive in your computer.
    Not sure if all that would help now, but it is something a few days late...!
    Good luck & happy computing!

  • Payment in CJIA and document in FB03, Value not matching

    ********Reposting from FI group***********
    Dear Gurus,
    In a scenario where user has made a payment to vendor, a clearing document has been posted. The values are not martching in payment transaction, CJIA and the document disaplay FB03. Please find the screen shot as below:
    The amount paid in FB03 TC is 11,550,730.20- and  7,945,096.92.
    Whereas in CJIA report it displays 61,363,254.58- and 55,591,175.59
    Kindly Note, I have already deleted and regenerated Project cash management document via programs RFFMDL16 and RFFMRP15P, but the values displays same.
    I am not able to understand the values which are shown in TC CJIA.
    Kindly provide your input.
    Thanks and regards,
    Narender.

    HI Gokul,
    Thanks for your reply. There are no entries in table RPSCO.
    But the entries are in table COFP with BTran as KAFM and value type 57.
    Regarding your questions: Another thing that i wanted to know is whether you ran CJFN for the accounting document after doing the actual payment?
    Initially these values were displaying once the payment was done (VType 57). I tried to execute the correction programs considering there will be inconsistencies in table. But the values did not changed. After this values were displaying in VType 54 and hence I execute CJFN to display Vtype as 57 such as to bring the system display as initial condition.
    Let me know if this helps. Further inputs awaited.
    Thanks and regards,
    Narender.

  • I have tried several times to install iTunes update 11.1.4 on my PC.  I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126).  I am told to reinstall iTunes, but nothing changes

    I have tried several times to install iTunes update 11.1.4 on my PC.  I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126).  I am told to reinstall iTunes, but nothing changes.  What next?  I've not had this problem with other updates requested by Apple.

    I have also had the same problem with my Win 7 32 bit computer.  I had great help from Apple techs in Montreal and Orlando for 2.5 hours.  They helped me remove every trace of Apple products and clean the registry in two different ways.  Each install gave the same problem!  If Apple techs can't fix it (on some of our machines) then we are really in trouble.  They promised to raise it with the "engineers" and get back to me with a solution.  I am waiting and hoping.  Otherwise maybe version 11.1.5 will have a fix ??

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

Maybe you are looking for