PCA Not filled during Customer Invoice
Hello!
We are using Intercompany Billing functionality where the sales organization and delivering Plant belong to two different company codes. When the sales order is created, the profit center from the material from the delivering Plant is derived in the sales order. Unfortunately, when the Customer Invoice (F2) is created, the profit center is blank and not picked up from the sales order. On the other hand, the Intercompany billing document (IV) gets the correct profit center.
My question is -- How can we get the Customer Invoice (F2) redetermine the Profit Center so that it will pick up from the material belonging to the Company Code of the sales organization?
Thank you in advance for all your kind assistance on this matter!!!!!
Regards,
Roville
Have you followed this logical chain of transaction
sales order -
>delivery note -
>goods issue -
> billing document.
Else use substitution rules.
Similar Messages
-
Balancing field "Profit Center" in line item 003 not filled during AFAB
Hello all,
We have activated business function FIN_GL_REORG_1 on EHP5 in ECC 6.0 and related reporting business function. One of the advantages of activating this for Fixed Assets is now asset balances can be reported at Profit Center/Segment level in sub ledger.
During executing depreciation, we are getting the below error message
Balancing field "Profit Center" in line item 003 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 003, even after document splitting.
Below configuration is done in our system -
Document splitting is active with standard variants for FA accounts.
Segment Reporting is actived under Asset Accounting IMG (under Integration with General :edger Accounting)
Activation of account assignment objects is active for cost center and specify account assignment types for account assignment objects KOSTL is configured for all transaction types (*) for APC and Depreciation postings is activated.
APC, Accumulated Dep and Dep expense account field status groups are changed to have profit center and segment as optional fields for inputs.
After all these settings, I am still getting the above error message.
Can someone please let me know if you had similar situation and how to resolve this issue.
Thanks,
PraveenHi
Check the below locations
Fin Accounting(New)Fin A/c Global Settings NewLedgersAssign scenarios and Customer Fields to Ledgers (Here assign Profit Centre)
Fin AccountingGL Accounting NewBusiness TransactionsDoc splittingDefine doc splitting characteristics for GL Accounting (Here Profit Centre mandatory check) Check with Activate and Deactivate
Regards
Sridhara Rao D -
Clearing Customer down payment for down payment amount not equal to Customer Invoice amount
Dear All,
Below process are posting Customer transaction directly via FI without SD cycle.
Customer down payment = 102 INR
Customer Invoice = 103 INR
While doing Customer clearing w.r.t Invoice system has cleared the down payment document but posted an open item in Customer account with clearing document number of value Rs 102 .
Concern:-
1) How 1 INR difference will be countered , via receipt payment from customer from bank account ?
2) In case we have defined tolerance limit of 5% for Customer and this come to be > 1 INR ,does SAP provide clearing Customer items
automatically via any Standard Customer clearing process based on rule defined ?
Pls suggest
Regards
MJHi,
the information of the exchange rates used for down payments, is
stored in table TCURR ( exchange rates)
For the request down payment the actual exchange rate of table TCURR
or the rate of document header is taken.
When this down payment request is payed, also the exchange rate of
the actual day (TCURR) is taken.
That´s why the amount in the bank posting in local currency result
from translating the foreign currency amount at the current rate,
instead of resulting from the total of the local currency amounts
from the settled items.
Regards,
Attila -
Balancing field "Profit Center" in line item 001 not filled during Payroll
Hi,
I am working on 6.0 with New Gl activated. We have a scenario in HR where in all the employees are created as vendors. Any loan to vendor will be given from FI directly but the recovery would be done through payroll.
During payroll system passes two entries as;
1. Basic Salary - Dr.
Transport Allow - Dr.
Other Allow - Dr
To Accrued Salary
To Clearing A/c
(This clearing account will gets nulified with vendor A/C)
2. Clearing A/C - Dr
To Vendor A/C
The above mentioned error is coming in second entry for line item 001.
Please let me know your inputs to solve this.
Thanks & Regards,
Ajay GupteHi,
System is basically failing to find a profit center in this transaction which is mandatory due to Document splitting configuration. You wil have to
1. Assign profit center manually while posting the transaction
2. If this is not possible, make settings in FAGL3KEH. You may need help from your FI consultant on this.
When you post the second entry are you referencing to first transaction or both of them indepenant?
Edited by: FICOTRAINEE on Mar 23, 2011 10:10 PM -
WBS not updated during asset invoice
Dear all,
I post an invoice through MIRO for an asset and i enter a WBS element. However, the line item of the asset is not updated and the WBS element is also not updated with the actual posting.
On the other hand, if i enter an expenses account everything works perfectly.
Any suggestions?Hi,
Usually you should not assign Cost objects to balance sheet accounts. It has to be assigned only for Profit and Loss accounts.
For assets you can maintain the WBS element in Asset Master creation AS01 and that WBS will be taken for accounting for any depreciation or expenses posted for that particular assets.
thanks and regards
Praveen.J -
hii...
when i doing entry by fb70 than system showing foloowing error.
Cost center 1000/HEP09OT01 is blocked against revenue postings on 31.08.2008Hello,
Instead of cost center you are required to enter a profit center.
You must have created the Revenue element in CO for this GL Account with Cost element category 11.
Please use profit center and post and it should allow you.
Regards,
Ravi -
How to obtain the house bank in the customer invoice posted by FB70?
Hi All,
Could anyone tell me how to obtain a certain house bank in the customer invoice posted by FB70?
I've made a test. I've filled an house bank in master data of the customer (company data). When I've posted the invoice by FB70, i've expected finding it in the item.... instead it wasn't there...
Cuold anyone help me?
Thanks
gandalfDear,
The House bank will not reflect in customer invoice, it is used in outgoing or incoming payments. -
BAPIs fpr T-Codes FV70 and FV-75 for creation of Customer Invoices
Hi all,
Can any1 tell me Validation BAPIs for T-Codes FV70 and FV75.
Please bear the following points
1. The BAPI should NOT create Parked Customer Invoices, they should just validate that the data to create the customer invoice.
2. The Transaction are used for CUSTOMER invoices NOt Vendor.
3. I've searched SDN and I got the follwing BAPIs
a. BAPI_INCOMINGINVOICE_PARK
b. MRM_INVOICE_PARK
c. MRM_PARKED_INVOICE_ACCDATA
But they are all for Vendor Invoices and CREATE parking invoices, Both the things I do not want.
If someone knows the name of the BAPI please forward to me at the earliest.
Cheers
AbhishekHi Eric,
Many thanks, I'll check the BAPI out, meanwhile can u also tell me whether there is a BAPI for creating Parking documents, i.e. BAPIs for T-Codes for FV70 and FV75.
I've tried to find a lot about this, but they say that BAPIs are there for only posting, not parking the Customer Invoices.
Cheers
Abhishek -
Cstomer customer invoice settlement against Incoming payment
Dear All
We have a problem during customer invoice settlement against incoming payment that shown for the partial payment as a new document creation. The scenario as shown below,
Doc No Amount
180000001 50000.00 ; - Invoice
140000001 25000.00- - Incoming Payment / partial payment
balance 25000.00 ; - create a new doc no ( but we need setoff to invoice no)
i.e:
180000001 25000.00
any BAPI to apply over come this problem ?
Thanks
MadhawaDear:
Please refer to the following link, the same question was raised by me
Invoice reference field in F-28
Regards -
Balancing field "Profit center" in line item 002 not filled
Dear All,
We are making incoming payment from customer in F-28
001 40 1031100881 TRA-IDBI-3384-IC 240060.00
002 19H 10000106 HYDERABADI BANGELS 240000.00-
003 15 10000106 HYDERABADI BANGELS 60.00-
19 means Special GL credit
H- Security deposit
003 15 10000106 HYDERABADI BANGELS 60.00- (Debit note document)
*While making incoming payment we are getting Error :Balancing field "Profit center" in line item 002 not filled for customer line item.
But there is no field to capture the profit center. Please provide me solution.
Thanks in advance..
Regards,
Saisri.Hi,
The error is due to document splitting being active, u wont give profit center directly, u need to give cost center. In cost center profit center will be updated.
So, assign cost center for line item 002 i.e in your case posting key 19H and then post.
Hope u understood.
regards
srikanth -
Profit center field is not appearing while posting of customer invoice and
Hi,
profit center field is not appearing while posting of customer invoice in F-02 i was selected profit center field is optional on posting key and field status group level ................
Can anybody tell what are all new gl Reporting list of transaction codesHi,
In the F-02 T.Code we cannot find the profit centre for customer line item. We have to attach the profit centre for the other line item i.e income gl account. Due to document splitting system will derive the profit centre and we can see the profit centre for the both line items under General Ledger view.
Thanks,
padmaja -
F-28 customer invoices were not cleared
Hello ,
i would need to find out what could happened when i was clearing the customer invoices in transaction F-28.
The entered invoices were not cleared after i pressed the "post".They appeared as open item on customer account so we had to clear them manually in transaction F-32.
It makes no sense... Can someone pls explain what happened?
Many thanks
ErikaNo, it is possible,if when you reverse the cleared document via FBRA, there are two ways to do that so, one way is to reset only, another way is to reverse and reset, once you select latter way, then another reversed document will be generated to offset the existing one, then you will be able to use fb03 to show that new generated finance document, then click header icon, then you will know who did it, hope it helps.
-
Customer invoices are not getting cleared when lockbox file imported in sap
Hello ,
When the lockbox file is imported into SAP , it is not able to clear customer invoices. It creates SAP documents and payment advices but not able to apply the payments to customers accounts.
Can anyone suggest on this with possible solutions.
Regards,
sureshHi,
You have to check the invoices are being match. The options are the following according to selection screen in FLB2:
Document numbers (BELNR)
Reference document numbers (XBLNR)
Document number first, if not found: reference doc. number
Reference document number first, if not found: doc. number
Document number first, then reference and amount
You have to check if the information which is coming in the file is the same present in the invocies in the ERP.
Also check the settings in OBAX and OBAy.
REgards,
Renan Correa -
PDF Image will not fill up entire custom size page
Fellow Forum Members,
I'm using Acrobat 6 and SnagIt 8. My screen captures with SnagIt are being saved in PDF format. But for some reason I can't figure out, the capture image is not filling up the entire 8" x 6" PDF custom size page. I keep on getting 1.5" Right and Bottom margins no matter what setting I use in Distiller or in SnagIt. It's like the image is refusing to resize itself to fill up the page.
Does anyone out there know of a way to screen capture an image at a 8" X 6" size and have it totally fill up a 8" X 6" PDF page? Is there a screen capture app that doesn't have this problem? Any help will be greatly appreciated. Thanks.If you use Acrobat's built-in functionality of creating a new PDF from the clipboard it fills the entire page.
-
In Import system not ask for custom/commercial excise invoice in GRN
Dear all,
In case of import purchase order system not ask me custom/commercial excise invoice at the time of goods receipt creation.
Custom excise invoice paid also.
Kindly help.
ThanksHi ,
The import process involves....
Clearing Customs duty MIRO-GR for import goods MIGO against the Invoice reciept-Capture the Import duties through J1IEX_Capture against the MIGO document-Final payment to main vendor through MIRO.....
Your eligible to take credit on CVD, Cess on CVD ,Secondary Cess on CVD and AED.
Regards,
Patil
Maybe you are looking for
-
Trying to update Podcasts returns the error - There was a problem downloading "podcast name". An unknown error occurred (-50). Please check that the URL is correct and the connection to the network is active and try again. All podcasts had been updat
-
Custom metadata for review comments
Hi, My users are using Acrobat and reader to review documents. There are tons of comments posted during this review process. Currently, once comments are included in the review, we don't have a way to custom tag the comments. Which can be used to fur
-
Can client dynamically link to shared libraries for different versions ?
Can Oracle client dynamically link to Oracle shared libraries if the versions are different ? Hi: I apologize for this newbie question: We are using PRO C to generate the client C code. We can compile both dynamic and static versions of our Oracle cl
-
Using spaces and switching mid process makes it crash
Final cut pro 5 crashes if you switch screens while rendering... kinda annoying.
-
Moving files in the same volume & Permissions
Is there a way to make a folder automatically inherit the permissions of the destination folder during a move operation on the same volume. If a user moves a folder from dirtree_A to dirtree_B on the same volume the permissions are retained from dirt