PDF printing errors with HP Officejet Pro 8000

When printing from FireFox PDF preview I always get a print feed jam error when printing the last 2 pages pages using double sided printing. There as been several documents that fail to print correct characters when using the HP (prints correctly using my Epson 88+).
Firefox version 30
Windows 7 SP1 (home and PRO), all drivers and Windows up to date.
Printer is networked using Linksys E2500 router

hello,
please try this.
The 29.0.1 firefox solved my problem!
Please check: Firefox---> Preferences (options)---->applications tab---->Portable document Format (PDF)----->Preview in firefox
Good Luck!
regards,
GAUTAM SHARMA.

Similar Messages

Paper mismatch error with HP officejet pro 8000 (A809)

officejet pro 8000 A809 wireless -wrong size paper
running OSX 10.7.3 on a macbook pro 2.3GHz Intel i5
this printer has been running fine for a couple/three years now.. no problem when I got the new macbook last summer, or when i upgraded to Lion.
Now it has started getting confused as to what the paper size is - i get this error:
Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray.
but only SOMETIMES. Like right now after screaming at it for an hour, unplugging and rebooting, etc., I sat down to write this and needed to get the exact wording for the error, so i told it to print. And it printed just fine. So I tried the next page I need to print, and I got the error again. I didn't even TOUCH the printer in between. The paper is letter size, it's always letter size. It's in landscape mode, but it has been for the whole morning, while I've been printing out certificates. Now it won't do it anymore. I am at a complete loss. I have rebooted my computer 3 times now, and unplugged the printer countless times. HELP!!!!!
It did this about 3 weeks ago and gave me fits for a couple days, and then magically started working fine again. I've deleted the USB and Bonjour versions of the printer from system prefs and re-added them. More than once. ;-)
Any ideas?

Though a day late & dollar short, I too encountered this issue with Yosemite.
After removing the paper & restarting the printer, I determined the issue to be related to the document. The document I was printing was sent to me from an international corporation. Which I figure was using a non-US paper format or a larger page format for the document.
I tried to change those within the document & was unsuccessful.
I copied the content to a new document & it printed fine.

Iphone e print/air print issues with HP Officejet Pro 8500 Premier All-in-One A909n

I downloaded the 4.2 upgrade for iphone thinking I would be able to print from my HP Officejet Pro 8500 Premier All-In-One A909n. I have upgraded the HP firmware. I have turned my printer on and off. I get an error message that says "No printer found." I am not able to contact HP due to my warranty being expired--even though I bought the extended warranty from the store. Please help. Thanks!

This printer is listed here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01619067&lc=en&dlc=en&cc=us&product=3857218#N46...
has offering eprint. However, some community messages say that it does not work.
I have not been able to get an email address set up for the printer, or to figure out whether or not it is web services enabled.
It does not have the icon on the touch screen that is shown in the hp instructions.
Any clues out there?

How do I control who can print over my wireless Officejet Pro 8000 A809n?

Hi all,
Looking for some help as to how I can control who can/cannot print over my Officejet Pro 8000 A809n (CB047A) printer.
We have multiple users in the house, but I only want to allow certain people to print wirelessly, is there some way I can set this up?
Any help would be much appreciated!

Sorry, you cannot control this other than to remove the printer from the network, turn it off or otherwise disable it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Printing duplex with HP Officejet Pro 8600 causes windows 7 OS to shut down/restart

Why when printing duplex with my HP Officejet Pro 8600 printer it causes windows 7( 64-bit) to shut down/restart. Windows message is "Windows has recovered from an unexpected shutdown. I've ran HP Hardward Diag. Utility and Print and Scan Doctor which indicated everything is working properly with the printer. Ocassionaly I can print duplex without windows shutting down and restarting, but most of the time it creates issue with Windows causing it to stop and restart. Single sided printing seems to be fine. I've already oncehad windows to "Startup Repair" in which ccase I selected restore to a previous working point. Everything worked for awhile then a duplex printing session starting causing windows to shut down again. THanks for your assistance.

Yes, the updated USB 3.0 driver corrects the issue and should be installed.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Booklet printing with HP Officejet Pro 8000 A809n

Can any one help with booklet printing? I have looked at other posts and none seem to quite cover my problem.
I want to print from Microsoft Office Publisher 2003, and have a PC running Windows XP.
The booklet needs printing on A4 (297 x 210mm) paper landscape format with 2 pages (A5) per side.
What prints out is portrait with 4 pages per sheet (A6 size) with the printing on the reverse side inverted.
I've tried all combinations of landscape and portrait etc. and nothing works. As I will need to do these booklets quite often in future I would like to sort it asap.
Thanks for any help.
This question was solved.
View Solution.

Hi there tallboy,
This microsoft article should help out with getting booklets setup and printed. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Air print with hp officejet pro 8000 wireless printer - a809n

The question is the same as the subject: how to air print?

Hi,
Hope these instructions and tips help:
http://reviews.cnet.com/8301-19512_7-20023976-233.html
http://www.aramistech.com/tips-tricks/enable-airprint-in-windows-and-use-any-printer/
Pease post back the result.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PDF printing errors with InDesign CS4 docs

I've discovered somewhat belatedly that since upgrading from CS3 to CS4, every pdf I have created in InDesign (a dozen or more) won't print. After a general error message, "the document could not be printed," I get one or both of these messages: "there were no pages selected to print" or "a drawing error occurred." I have variously tried every page selection option to no avail. I have also tried recreating the pdfs from the original ID files with different export settings, again with no success. PDFs exported from other programs are not a problem, nor is printing from InDesign. I'm on a Mac. Any thoughts?

My (admittedly Clonescript) HP prints this without error messages but prints in Courier anything done in Optima ExtraBlack, which claims to be embedded, but seems not to be. My PCL printer prints this without errors or problems.
If I bring this back into CS4 and export back to PDF, it prints properly in Optima ExtraBlack.
If I edit it in Acrobat 7, I can change Optima Extrablack (not on system) to Optima Extrablack (on system) and it prints properly.
I would want to look into your Optima Extrablack font. First try substituting different fonts, something generic like Helvetica (not as a solution, just as a test). If that fixes it, try substituting something generic only for Optima Extrablack (the "A House of BRIC" head and the drop folio). If that fixes it, make a document that uses only Optima Extrablack. If that fails, look into uninstalling and reinstalling Optima Black.
BTW, you don't have Reader 8 and Acrobat Pro 9 installed on the same machine, do you? This is not recommended, although I don't know what particular problems it causes.
There's quite a bit about the drawing error if you google it. In particular, this might be relevant (while somewhat off-color): http://groups.google.com/group/adobe.acrobat.windows/msg/8dc9a7dfea59a57d?hl=en&
Ken

Duplex Printing Bug with HP OfficeJet Pro L7680

Well - Duplex printing works but the back page will only print with binding on the top, Binding on the side does not work! Minor bug but still a bug at least with the HP!!

Kev,
A couple of points - assuming your using the HP OfficeJet Printer - I am assuming your connecting it via the Ethernet point which means it is communicating via IP. That being said - here is what I ran into.
When I first added the HP Printer - Leopard wanted to configure the printer via BONJOUR. I went ahead and let it do that - however printing was terrible!!!! I could send jobs to the printq, but the only way they would print was if I turned the printer on/off again - and the the would magically start printing. Then the printer would go "offline" and I was forced to do this same on/off routine.
So - I went back into add printers - and let the dialog box sit there for a little while and all of the sudden the list updated with an HP2A7180 - Kind - IP. I selected this printer and then told it to use the HP driver via the Print Using - drop down selector and my HP has been working fine since (minus the duplex).
Additionally it installed an configuration utility which allows me to monitor inks, settings and such.
Hope this helps - Bill

"media jam" message with HP officejet pro 8000 A809

The printer has been sitting for 3 weeks while we were on vacation. I tried to print something and get a "media jam" error message in the computer printer's status box. Also, the yellow ink is low but I don't think this is the problem. How do I find the jam?
New message is
"The print cartridge cradle cannot move. Turn the printer off, free the cartridge cradle, and turn the printer back on."
Where is cartridge cradle and how do I get to it?

Hi,
Here is a link to troubleshooting for paper jams for your printer. there are videos showing how to clear jams and how to access the carriage:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=1452&tmp_task=solveCategory&lc=en&dl...
I hope that this helps solve your issue.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Current update has intermittent problem of printing gibberish with HP Officejet Pro 8500. No problems before most recent update.

Even in Print Preview will show as gibberish--and print as gibberish. If repeatedly open document to print, suddenly it Previews & Prints correctly.

Have you moved the paper guides to properly align the envelopes? I do not see how envelopes can be loaded in any position but the center with the paper guides set snugly. See page 42 (46) of the manual here. Also, if you have the optional second paper tray note that envelopes are not supported in it, you need to use the top tray.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printing envelopes with HP Officejet Pro X576dw

I want to print individual addresses on envelopes. I have followed all tjhe instructions including loading the tray 2 with envelopes. Every time I ask to print, I get a notice saying that I need to put the paper into the tray before printing. Bloody obvious really. I have done on numerous occassions today, checked all my setting over amnd over again but get the same old message, no paper in the trat which is BS. Can anyone help, I have a lot of envelopes to print.
genpat

@genpat
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Officejet Pro 8000 wireless and windows7 starter

I just bought a mini notebook with windows 7 starter. Can I print to my HP Officejet Pro 8000 Wireless and where can I find the drivers?

According to this it looks like the drivers built into Win 7 will support USB printing only for now. Full driver to be released later this month, sorry.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet Pro 8000 Wireless Has Both Power and Resume Buttons Blinking

Using Vista operating system with my Officejet Pro 8000 Wireless. The Power button and the Resume button are blinking at the same time. I went through HP's recommended fixes step by step and it still has the same problem. I've done all the resets, etc., etc. and I searched High and Low for a paper jam which these two blinking lights apparently indicate but could not locate even a tiny little piece of paper jammed.
Any help is appreciated and by the way, this printer has not been used a ton. Simple average use and well below the monthly use rating.
Thanks, Rick

I also have been having this exact same problem for over two years now but never found a solution. I think I have only printed out about 50 pages since I purchased the printer new in 2010 and at one point it just started doing this. I can reset the printer by unplugging it and it will work temporarily; sometimes long enough to print out 2 or 3 pages but always goes back to the same faulting state within minutes. This happen whether or not it's connected to a network, USB, or nothing at all. I also have the newest firmware and purchasing new ink cartridges about 15 months ago never fixed it. (They are nearly empty now and I don't think I have printed more than about 15 pages!) Does anyone from HP know why the printer keeps faulting like this? I print so seldom that it's a shame for me to have to have to buy a new printer just so that I can print out the odd few pages every few months, and this one was expensive back when I purchased it and it's practically useless when it keeps faulting like this.

Duplex printing with officejet pro 8000

I am using this officejet pro 8000 to print up some newsletters. When printing a two sided copy (duplex printing) something happens which changes my border setting. Printing the exact same document, but electing one-sided copy renders a perfect border. I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer. Has HP ever come up with a fix for this? I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines. This has rendered good borders on duplex prints, but diminishes the quality of the print copy. Whatcha think?

Terrible Tom wrote:
Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
Apple doesn't write the HP software.
Hope this helps.

PDF printing errors with HP Officejet Pro 8000

Similar Messages

Maybe you are looking for