Percent Completed CHANGES! 41% to 11%!

I have been compressing a file for 4 days now and yesterday the status read that 41% was done.
Today, I checked it out and it says 11%!!!
What does this mean?
Here are my specs:
Name: MPEG-2 3.7Mbps 1-pass
Description: Fits up to 150 minutes of video with Dolby Digital audio at 192 Kbps or 120 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated file size: 8.88 GB
Type: MPEG-2 video elementary stream
Usage:SD DVD
Video Encoder
Format: M2V
Width and Height: Automatic
Selected: 720 x 480
Pixel aspect ratio: NTSC CCIR 601/DV (16:9)
Crop: None
Padding: None
Frame rate: (100% of source)
Selected: 29.97
Frame Controls On:
Retiming: (Best) High quality Motion Compensated
Resize Filter: Statistical Prediction
Deinterlace Filter: Best (Motion Compensated)
Adaptive Details: On
Antialias: 0
Detail Level: 0
Field Output: Progressive
Start timecode from source
Aspect ratio: Automatic
Selected 16:9
Field dominance: Automatic:
Selected Top first
Average data rate: 7.7 (Mbps)
1 Pass VBR enabled
Maximum data rate: 9 (Mbps)
Good motion estimation
Closed GOP Size: 15, Structure: IBBP
DVD Studio Pro meta-data enabled

Hi,
You cannot change the material codes of the existing material instead u have to create new material codes with 11 digits for the existing materials along with any new materials.
For your old material codes u have to complete all the open orders and all the stocks to be exhasted before u should take further steps.
Now after clearing all the stocks of the old materials, u can archive all those materials since u cannot delet the material master which have been already created.
Hope above gives you some idea abt ur requirement.
Anyway wait for some more experts to reply.
Regards
Suri

Similar Messages

Hours worked uncoupled from Percent complete

It seems that the work hours and Percent complete are tied together (for updating tasks). is there a way to remove this feature?
I tried looking into the enterprise custom fields, but since it is a part of project OOTB, it is not there. is there another place i can find and change this?
or perhaps a workaround?
for example, i have 1 person assigned to a single 8 hr task, due to some unforeseen circumstance, he has worked 6 hours and is only 50% done, however, when he goes to his tasks to update his work, he can not enter both of these at the
same time.
he can either update to 50% done (4 hrs filled in automatically )
or he can enter 6 hours worked (75% done filled in automatically, overriding his 50% done if entered)

Hi efrizzel,
I would advise you to make your tasks as effort driven with a range of date for completion of task. That would help you get actual reported tasks over a period of time with better accuracy.
Regards, Syed Faizan ur Rehman, CBPM®,PRINCE2®, MCTS

Project Physical Percent Complete IS not Getting updated in Fusion Projects

Hi Everyone,
I am Working on Fusion PPM Release9
In Project Plan Type i have set Physical Percent Complete to Cost & Automatic But in dashboard the Project Physical Percent Complete is not Updating
Please help me with the issue
Thanks
Shaan

Hi Kedar,
It should not happen.
Question: Do such projects have a direct underlying task?
I have know a problem, which occurs only that the project has direct underlying task. If yes, I will find the note for it.
Kind regards,
Zhenbo

HT1529 The latest version of iTunes has completely changed my ability to access my iTunes. I can no longer burn a CD that will play on anything other than another computer.

The latest version of iTunes has completely changed the format and also why will it not allow me to burn a CD compatible with other devices?

I'm using iTunes 11.1.1 on a Mac mini running OS 10.7.5 and I burn CDs which play in this machine's external optical drive, my car, and the Pioneer audio CD players downstairs. I typically use Verbatim recordble CDs. After selecting the playlist I want to burn, I make sure that "Audio CD" is selected - this has always been the default for me. If this isn't working for you, I don't know what to say - but I'd suspect the drive you're using to burn CDs is getting wonky.
Good luck
srb

VERY Disappointed-just upgraded from 12 to 13 and the functionality of the Organizer has completely changed

I have been a long time user of Photoshop elements/Premier and I just loaded version 13 (from 12) and they have completely changed the functionality of the organizer! OMG!!!!! You can no longer move a picture easily in the albums and you MUST use one of the Adobe preset backgrounds for a slide show. Really??? Generally I like the templates for certain uses but I am creating long movies of travels. I do NOT want your backgrounds, but apparently I have no choice. And I can no longer interface with Premier - then why did you sell them to me as a package?
I am sure I can't get my money back because I did a direct download but I have uninstalled the program and gone back to version 12 - BUYER BEWARE if you have been using Premier with the organizer it will not work seamlessly. Such a disappointment because a good and generally well functioning program has been butchered. .

I've just looked to buy iCab as people have suggested but reviews suggest it doesn't work reliably since IOS5.
Frankly I feel cheated and I've been a historic fan since having an Apple IIci 20 years ago. A major plus point in iPad usability has gone. Funilly enough I was about to recommend 25 iPads as Safari was so useable and the users I had in mind having seen my iPad were keen. But I couldn't hand on heart recommend iPads now and after seeing how Apple drops key functionality and usability wouldn't trust this supplier. Guess I'm glad I didn't recommend them and then have this happen.
And if I want tabs I'd have gone with Andriod for half the price.
It wouldn't be so bad if I could reverse the upgrade.
Anyone know how to cheat the system?

Appearance has completely changed and can no longer purchase music

Hello, I have recently upgraded to the latest version of Itunes and the Itunes store appearance has completely changed and rendered Itunes essentially useless. I only get a white column with a hypertext link that says powersearch and then it asks me to list artist, album, song, etc. If I am lucky enought to find a single that I want, then when I click on it, I literally go nowhere. Is there a preference setting that I am missing? Please help as I cannot purchase any music at all.

iTunes 9 requires Safari 4.0.5 to access the iTunes Store. If you don't use Safari, it still has to be present for iTunes to use it for store access. If you don't have Safari, that may be your problem. Get it here: http://www.apple.com/safari/download/

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

CProjects 4.0 - Percent Complete field in Evaluations

Gurus,
I am looking for the attribute which corresponds to the task's 'Percent Complete' field. I intend creating an Evaluation Layout with 'Percent Complete' as one of the columns. Just not able to find out.
Please suggest.
Thanks and Regards.

Hi Zhenbo,
Thanks for responding.
I did try 'Work Complete'. I have a scenario wherein, for a task, the 'Work' is 50 hrs. 'Confirmed' is 25 hrs. 'Remaining Work' is 25 hrs. By this, I should get 50% as the 'Work Complete'. I get 0 in Evaluations.
There's another field 'Percent Complete'. This is what I was looking for. I inentded rolling up the values for each task in a phase to the phase and finnaly to the project. But having not found the 'percent Complete' for the task, I am not able to proceed.
Thanks and Regards.

Cross Project Percent Completes

I am developing a MS Project 2010 schedule in which the client would like to see an overall percent complete for process areas that repeat in lower level sub-projects.
For example, the project breaks down into system types, then individual systems within those types, then process areas, such as CM, Maintenance, Provisioning, Supply Chain, etc., with each of these process areas breaking down into individual activities. What
I am trying to develop is a percent complete for the process areas at the top most level (across the system types), based on the percent completes for those process areas at the individual system level. The verticals roll up fine (percent complete for the
process area within the system to the system, then to the overall system type, then to the overall project), but I'm trying to do a more horizontal view of the project's status. Never done anything like this before, so any help would be appreciated.

Hi Baltjazz08,
Here is all relevant information about outline codes (both process and configuration). Those links are for 2003 but applicable to 2007, 2010 or 2013.
http://office.microsoft.com/en-ca/project-help/defining-the-structure-of-your-project-with-custom-outline-codes-HA001020301.aspx
http://office.microsoft.com/en-us/project-help/create-an-outline-code-HP045331925.aspx
Then I'm not sure that it will help in doing what you need. Creating a custom field for entering % complete on tasks you're interested in would be the best solution. Anyway be careful concerning the rollup for total. If you choose average, it might not give
a proper result, since if 2 tasks have a different quantities of work, the % complete of the summary task will not be the average of the 2 % complete.
An idea would be to use a WBS for all projects, containing all process areas. Then using SSRS or Excel services reporting capabilities, you'll be able to extract horizontal % complete of process areas through your projects.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Percent Complete: 100; Status: Failed

Hello,
I just upgraded machines and so had to reinstall my Pro apps including Compressor 3.0.3. Now when I use Motion 3.0.2 -> File -> Export Using Compressor and then launch the Compressor jobs they each fail. When I look at the Status from the Batch Monitor it says, "Percent Complete 100; Status: Failed" and the corresponding log entry is:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<services></services>
The motion file was copied over for rendering properly but there is no resulting movie file. This is true across multiple shots. What might have caused this from a fresh install of Pro apps on the new iMac (10.5.2)?
Thanks.

I've found that I can get a movie file with an uncompressed 10-bit option but not 8 bit also. Why would this be? (The initial compression that keeps failing is H.264.)

I loaded what I guess is the new version of Firefox and it completely changed my whole task bar. I don't have my Norton Logins with stored passwords, and it's hard to find my favorites. Help get it back to how it was.

I loaded what I guess is the new version of Firefox and it completely changed my whole task bar. I don't have my Norton Logins with stored passwords, and it's hard to find my favorites. Help get it back to how it was.

Credit Tony E
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data. See https://support.mozilla.com/kb/Uninstalling+Firefox
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Task Percent Complete and Actual Dates - RELATE TO STATUS

Hi,
We are on PPM 5.0.
For Project Management (cProjects), we have a requirement whereby task status should not be set to 'Complete' unless:
1. The Percent Complete is 100%
2. The Actual Start and Actual Finish dates have been entered.
Is it possible to realize this?
Please advise.

Hi,
%age completion is independent of the status of the task as per standard SAP PPM 5.0. You'll need to use BADIs in order to meet you requirement.
Gautam

Schedule Percent Complete doesnt 'roll up'

why the schedule percent complete doesnt ROLL UP to Project level ? how can I get its rolled up for the project level?

unfortunately this feature is not available.

I have recently bought my mother the newest shuffle.The layout of iTunes when browsing her iPod has completely changed.

Hi, I'm not sure if this question has been asked before, and apologies if it has, but I've been tearing my hair out, trawling google for an answer, so any advice you can offer would be GREATLY appreciated! As I have mentioned, my mother has the latest model of an iPod shuffle, whereas I use a pretty old (but faithful, nonetheless!) iPod Nano (I think). When I plug in my iPod to iTunes and browse the songs that are on it, I basically have a list much like when I am just browsing my iTunes library. However, when I try to use my mother's iPod in the same way, I have a weird, disorganised, confusing page (I will try to attach a screenshot to show this) and a lot of the music my mum has put on her iPod is not showing up in the list of songs and artists it presents.The songs definitely have been added though as I can see them when I look at her iPod separate from the laptop. If anyone can tell me how I can change the settings so that my mother's displays the same, I would be ever so grateful, as she is completely disillusioned with her iPod and wants to throw it out the window. I am running iTunes on Windows 7 if this helps at all.
Thank you again for any help you can offer; you will save my mother and I of dying an early death of high blood pressure!
Jess

Hi there,
Things have changed quite bit in the latest versions of iTunes. The article below goes over the process of setting up syncing in iTunes 11 and you may find it useful.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
-Griff W.

Percent Complete for To-Dos (Tasks)

Hi there -
I am pleased with my new MacBookPro because it promises to work, and so far so good. I am converting from mean Microsoft to just-works Mac.
But I am not excited about the capabilities of the tasks in the to-do list. Both iCal and Entourage are overly simple. Over the years that I have been using the task lists in Outlook I've developed quite a reliance on the sorting capabilities - in particular. For example, one of the main sorting fields that I use for planning my day is the "% complete" field. This field helps me to sort my list indicating tasks that might be require very little remaining effort before they are accomplished.
Can you tell me how to accomplish this kind of function on my Mac?
I am willing to purchase a third-party software, if that is what it takes. But with more than 500 tasks that I track in my to-do list, trying to get by on the standard features of iCal is just not going to work for me. What are some well-worth-the-price third party softwares out there that do provide this?
Similarly, I also use a project code field (custom field I created in Outlook), the "deferred" & "waiting on someone else" statuses, and more than one task folder. So any feedback on software options that would include my whole "wish-list" would be really helpful. Likewise, save-your-money tips would be great as well.
Any way, let me know what you think. And thanks for reading this.
P.S. It's only such a long list because I have tasks like "change the air filter for the house" and reminders for Daylight Savings Time Changes, etc in there in addition to habits I am trying to learn. The recurring reminders are a wonderful weapon against my saturated short-term memory! lol
MacBookPro Mac OS X (10.4.9) from 98SE

Thanks Geoff. I haven't even discovered the printing issue yet. Now I am even more convinced that iCal will not work for me.
But I still could use some direction toward a solution that will work. Please. : )

Percent Completed CHANGES! 41% to 11%!

Similar Messages

Maybe you are looking for