Performance Manager running, but collecting no data
I have configured PM on my Fabric Manager server and verified that the service is running. However, when I look at the PM reports, all the graphs are blank.
The logs contain quite a few of the following errors:
WARNING 2006/03/23 12:51:23 PM PMStat database error: NPort 10000000c9371482 not found in fabric discovery, performance data is not updated in database
Any help in debugging this issue would be greatly appreciated. Thanks,
So let me understand better, you have a Brocade switch in this VSAN, you are running this VSAN in interop mode 2 or 3 ?
You should be able to Create collections for the ISL's and devices on the MDS side, flows can not be created for devices from/to Brocade but can be created to and from FC devices in the MDS part of the VSAN
Similar Messages
-
I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and automatically add new set of data when the next rising edge occur. Please help.
thanks a lot.LabWindows/CVI actually ships with a comprehensive set of examples for just about every area of programming you can use it in, including triggered analog data acquisition and ActiveX control of Microsoft Excel for data logging. Go to the following two directories on your computer to find respective examples for the two areas you are inquiring about:
1) C:\MeasurementStudio\CVI\samples\DAQ\Ai\DAQsingleBufExtTrig.PRJ
2) C:\MeasurementStudio\CVI\samples\activex\excel\excel2000dem.prj
Just make sure to study the examples carefully so that you fully understand the processes followed for triggered analog acquisition and the process of launching an ActiveX automation server for control, and then you should be able to merge the concepts shown in both of the example
s to make the application you desire.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask -
Object Manager running but will not display
Hi I was wandering if anyone can help
I'm running TTA Enterprise 3.40.911 on SuSe Linx 8 enterprise server.
Intel Linux Kernal 2.4+
The problem I'm having is that I�m having problems displaying the object
manager.
The web top show that it is running but I'm not getting a display. I have
tried from a client pc and from the server itself.
I have also tried using the native client, this has the same problem.
Any ideas?
Thanks in advance
Dalafter making changes to SSH config, you need to restart sshd.
Also see if disabling Xsecurity on the EE server helps.
$ tarantella config edit --security-xsecurity 0
Regards,
Dal wrote:
Thanks but no joy, I downloaded openssh and changed the x app to yes in
the config. Still no joy in displaying the object manager, or any other
webtop application.
I've managed to catch the error if this is any help.
./.././bin/bin/ttaxset: unable to open display ""
Exception in thread "main" java.lang.InternalError: Can't connect to X11
window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at
sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:134)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at
java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:62)
at java.awt.Window.init(Window.java:231)
at java.awt.Window.<init>(Window.java:275)
at java.awt.Frame.<init>(Frame.java:401)
at java.awt.Frame.<init>(Frame.java:366)
at javax.swing.JFrame.<init>(JFrame.java:154)
at
com.sco.tta.admin.gui.RunAdminGui$AdminFrame.<init>(RunAdminGui.java:260)
at com.sco.tta.admin.gui.RunAdminGui.<clinit>(RunAdminGui.java:68)
Connection to pcms-tta2.local closed.
Regards
Dal
David wrote:
Dal,
Try this:
http://www.tarantella.com/support/documentation/sgd/ee/3.42/help/en-us/base/gettingstarted/ssh_install.html
Regards,
David
"Dal Sandhu" <[email protected]> wrote in message
news:[email protected]...
Hi I was wandering if anyone can help
I'm running TTA Enterprise 3.40.911 on SuSe Linx 8 enterprise server.
Intel Linux Kernal 2.4+
The problem I'm having is that I'm having problems displaying the object
manager.
The web top show that it is running but I'm not getting a display. I have
tried from a client pc and from the server itself.
I have also tried using the native client, this has the same problem.
Any ideas?
Thanks in advance
Dal -
Performance manager collection
The majority of the host end device data is collected but there are hosts that there is no data just n/a in the following fields:
Avg. Rx/sec Avg. Tx/sec (Rx+Tx)/sec Peak Tx/sec Peak Tx/sec Errors Discards all have n/a entries. How do I enable the collection for these hosts.Performance Manager does not collect statistics on nonmanageable and non-MDS switches. Loop devices (FL/NL) are not collected.
One year's worth of data for two variables (Rx and Tx bytes) requires a round-robin database (rrd) file size of 76 K. If errors and discards are also collected, the rrd file size becomes 110 K. The default internal values are as follows:
â¢600 samples of 5 minutes (2 days and 2 hours)
â¢700 samples of 30 minutes (12.5 days)
â¢775 samples of 2 hours (50 days)
â¢300 samples of 1 day
A 1000-port SAN requires 110 MB for a year's worth of historical data that includes errors and discards. If there were 20 switches in this SAN with equal distribution of fabric ports, about two to three SNMP packets per switch would be sent every 5 minutes for a total of about 100 request or response SNMP packets required to monitor the data.
Because of their variable counter requests, flows are more difficult to predict storage space requirements for. But in general you can expect that, each extra flow adds another 76 KB. -
Performance manager (strategy builder)
Good afternoon everybody,
i can't run the Strategy Builder, click the link appears when a page with the following error:
Servlet Engine Exception: null
URL: /PerformanceManagement/scripts/tools/err_page.jsp?ctxt=sundance
StackTrace:
java.lang.NullPointerException
at org.apache.jsp.jsp.ipmstart_jsp.getLocaleString(ipmstart_jsp.java:195)
at org.apache.jsp.jsp.ipmstart_jsp._jspService(ipmstart_jsp.java:628)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
does anyone know how do i solve this problem?
thank'sHi John, From the output you shared it looks like you using Performance Advisor and want to share a graph of a 7-mode system. The instructions link you shared is from Performance Manager which is for Clustered Data ONTAP only. In the Performance Advisor there is unfortunately no way to share a link. You can 'save as' to png as you probably already saw, or you can use the dfm CLI to generate the same and email, perhaps as a daily report. There is also a data collector that will post to the NetApp ToolChest that submits data to Graphite with dashboards in Grafana. This solution would allow sharing of a URL like you desire. If you want more info on this let me know. Kind Regards,Chris MaddenStorage Architect, NetApp
-
Performance Manager LUN latency
Hello,Can you tell me if I can see LUN layer latency in OnCommand Performance Manager ? I can see the LUNs on volume but performance data seems to be gathered only on Volume level. Can I see it also on LUN level? And another question - is there any way to disable performance alerts until certain latency? F.e. I don't want to see alerts for 5ms latency especially as they are logged as critical. It really makes no sense so for the moment I have disabled all performance alerts.
Hi John, From the output you shared it looks like you using Performance Advisor and want to share a graph of a 7-mode system. The instructions link you shared is from Performance Manager which is for Clustered Data ONTAP only. In the Performance Advisor there is unfortunately no way to share a link. You can 'save as' to png as you probably already saw, or you can use the dfm CLI to generate the same and email, perhaps as a daily report. There is also a data collector that will post to the NetApp ToolChest that submits data to Graphite with dashboards in Grafana. This solution would allow sharing of a URL like you desire. If you want more info on this let me know. Kind Regards,Chris MaddenStorage Architect, NetApp
-
Performance Manager graphs "export" via url
Hi, I am using performance manager (I think).... when I do a Help->About->Configuration I get this : Application name: NetApp Management Console Version: 3.3 Build number: 3.3.0.7209 Installation directory: C:\Program Files (x86)\NetApp\Management Console Java VM OS Architecture: x86 OS Name: Windows Server 2008 R2 OS Version: 6.1 Java VM Name: Java HotSpot(TM) Client VM Java Version: 1.6.0_29 Java Vendor: Sun Microsystems Inc. Java Free Memory: 22.0 MB Java Total Memory: 93.1 MB Java Max Memory: 494.9 MB DFM Version: 5.2.0.16233 (5.2) DFM Serial Number: 1-50-122030 DFM Host Name: ilcwdfm01 DFM Node Limit: 250 (currently managing 8) Provisioning Node Limit: 250 (currently managing 8) Protection Node Limit: 250 (currently managing 8) DFM OS: Microsoft Windows Server 2008 R2 Service Pack 1 (Build 7601) x64 based DFM CPU Count: 2 DFM System Memory: 8191 DFM Install Directory: C:/Program Files/NetApp/DataFabric Manager/DFM DFM System Time: Aug 08, 2015 08:08:25 PM Data ONTAP Operating Mode: 7-Mode So, the question is..... *I* can see the graph that I'm interested in - it's a volume IOPS graph. However, I want *others* to be able to see that graph, too - not necessarily admins (ie, management types). I don't want them to have to log into the app to see it, either. In some docs I've seen an option called "copy link to page", which seems like EXACTLY what I'd like to do - copy the link to the page I'm looking at, and then send that link to the others that I want to be able to see it. (see https://library.netapp.com/ecmdocs/ECMP1552961/html/GUID-E000CFC4-C568-4181-AAB5-790BF331FD6C.html). However, that option does not show up under my "Actions" pulldown, like the link above says it should. Does anyone know where to find this option, and/or how to acomplish the same thing ? I was thinking there must be a "standard" url that points to these types of graphs, but can't find any reference to that, though. Thanks, John
Hi John, From the output you shared it looks like you using Performance Advisor and want to share a graph of a 7-mode system. The instructions link you shared is from Performance Manager which is for Clustered Data ONTAP only. In the Performance Advisor there is unfortunately no way to share a link. You can 'save as' to png as you probably already saw, or you can use the dfm CLI to generate the same and email, perhaps as a daily report. There is also a data collector that will post to the NetApp ToolChest that submits data to Graphite with dashboards in Grafana. This solution would allow sharing of a URL like you desire. If you want more info on this let me know. Kind Regards,Chris MaddenStorage Architect, NetApp
-
Information about Performance manager's APIs
<p><span style="font-size: 10pt; font-family: Arial">Hi All,</span></p><p><span style="font-size: 10pt; font-family: Arial"> </span><span style="font-size: 10pt; font-family: Arial">I require some information about Performance Manager of Business Objects XI R2. </span></p><p><span style="font-size: 10pt; font-family: Arial">Business Objects provides APIs for BOE server, Web Services for customization, as that of, is there any APIs available for Performance Manager (for customization)? </span><span style="font-size: 10pt; font-family: Arial">Can we customize the performance Manager as per requirements? <span> </span></span><span style="font-size: 10pt; font-family: Arial"> </span></p><p><span style="font-size: 10pt; font-family: Arial">Please let me know your views & finding on this topic.</span><span style="font-size: 10pt; font-family: Arial"> </span></p><p><span style="font-size: 10pt; font-family: Arial">Thanks</span></p>
Hi John, From the output you shared it looks like you using Performance Advisor and want to share a graph of a 7-mode system. The instructions link you shared is from Performance Manager which is for Clustered Data ONTAP only. In the Performance Advisor there is unfortunately no way to share a link. You can 'save as' to png as you probably already saw, or you can use the dfm CLI to generate the same and email, perhaps as a daily report. There is also a data collector that will post to the NetApp ToolChest that submits data to Graphite with dashboards in Grafana. This solution would allow sharing of a URL like you desire. If you want more info on this let me know. Kind Regards,Chris MaddenStorage Architect, NetApp
-
UCS Performance Manager and NetApp c-mode filers
We started an evaluation of the UCS Performance Manager. I can't add to the UCS Performance Manager Infrastructure any NetApp c-mode filers. Does anyone have the same problem?
Hi John, From the output you shared it looks like you using Performance Advisor and want to share a graph of a 7-mode system. The instructions link you shared is from Performance Manager which is for Clustered Data ONTAP only. In the Performance Advisor there is unfortunately no way to share a link. You can 'save as' to png as you probably already saw, or you can use the dfm CLI to generate the same and email, perhaps as a daily report. There is also a data collector that will post to the NetApp ToolChest that submits data to Graphite with dashboards in Grafana. This solution would allow sharing of a URL like you desire. If you want more info on this let me know. Kind Regards,Chris MaddenStorage Architect, NetApp
-
Error On configuraing Performance Management Process
hi all,
I am able to create Pre-define Performance Management template. but after that, on configuring Performance Management Process i am getting follwoing error on click on SAVE button.
A process already exists in the time period entered
Thanks and Regards,
Jayesh TalrejaHi Team,
Please let me know, if any one of you have any suggestions?
Thanks and Regards,
Jayesh Talreja -
Request still running but?
Hi,
My request is running , but in the data target the request is set to green why?
give me the solution
and am not able to see the data in the data target
data is there in PSA
Thanx in advance,
Ravi.Hi Ravi,
Please check with the Tcode -SM37 whether your job is complete or not.
If Your job is not complete then you are unable to see the data .
If your job is complete and request is still running then kindly check the log of the you job in sm37 only from that you can come to the detail that why the status is green and the request is still running.
Rgds,
Hirdesh Gupta -
Performance Manager and Data Gatherer
Hello,
I am looking for some basic info (I think). I have been using the EM Console - standalone for some time now but would like to use the diagnostic pack and Performance Manager. Can this be used in a standalone configuration or do I need to buy Enterprise Manager? If it works in a standalone configuration and I do not need to buy it, could you point me in the direction of documentation on how to start the data gatherer on my 9i database on AIX 5?
Thanks,
Jeff GrahamPost Author: Ferhat
CA Forum: Performance Management and Dashboards
you have to find the keyword to see...
i suggest you to uninstall businessobjects and install again(else it's very hard to add the performance management program).
while you install, check the install performance management also(you have to have the keyword). -
Query runs in management studio but not in SQLAgent job
I have the following query which runs fine in Management Studio but when I put it in a SQLAgent job it fails saying
Error formatting query, probably invalid parameters (SQLState 42000 Error 22050)I have tried changing Quote characters but to no avail.
Does anybody have any idea why this would be happening?
Regards
Ron
declare @servername nvarchar(150)
set @servername = @@servername
declare @mysubject nvarchar(200)
set @mysubject = 'Toners adjusted out '+@servername+'.'
EXEC msdb.dbo.sp_send_dbmail @recipients='[email protected]',
@subject = @mysubject,
@body = 'Toners were adjusted out. View attachment to see the details',
@query = 'use livedatabase;select trc_part, trc_job, trc_qty, trc_inits from livedatabase.dbo.Traces
where trc_part like "TONER%"
and CAST(trc_date as date) = CAST(getdate() as date)
and trc_typ = "O"',
@query_result_width = 600,
@attach_query_result_as_file = 1I have another SQLAgent job that is almost identical in what it does, ie sending an email with a query result and it works fine. See below.
Therefore it can't be permissions or dbmail setup but I cannot see what it is.
--== This is for SQL 2005 and higher. ==--
--== We will create a temporary table to hold the error log detail. ==--
--== Before we create the temporary table, we make sure it does not already exist. ==--
IF OBJECT_ID('tempdb.dbo.ErrorLog') IS Not Null
BEGIN
DROP TABLE tempdb.dbo.ErrorLog
END
--== We have checked for the existence of the temporary table and dropped it if it was there. ==--
--== Now, we can create the table called tempdb.dbo.ErrorLog ==--
CREATE TABLE tempdb.dbo.ErrorLog (Id int IDENTITY (1, 1) NOT NULL,
logdate DATETIME, procInfo VARCHAR(10), ERRORLOG VARCHAR(MAX))
--== We create a 3 column table to hold the contents of the SQL Server Error log. ==--
--== Then we insert the actual data from the Error log into our newly created table. ==--
INSERT INTO tempdb.dbo.ErrorLog
EXEC master.dbo.sp_readerrorlog
--== With our table created and populated, we can now use the info inside of it. ==--
BEGIN
--== Set a variable to get our instance name. ==--
--== We do this so the email we receive makes more sense. ==--
declare @servername nvarchar(150)
set @servername = @@servername
--== We set another variable to create a subject line for the email. ==--
declare @mysubject nvarchar(200)
set @mysubject = 'Deadlock event notification on server
'+@servername+'.'
--== Now we will prepare and send the email. Change the email address to suite your environment. ==--
EXEC msdb.dbo.sp_send_dbmail @recipients='[email protected]',
@subject = @mysubject,
@body = 'Deadlock has occurred. View attachment to see the deadlock info',
@query = 'select logdate, procInfo, ERRORLOG from tempdb.dbo.ErrorLog where Id >= (select TOP 1 Id from tempdb.dbo.ErrorLog WHERE ERRORLOG Like ''%Deadlock encountered%'' order by Id DESC)',
@query_result_width = 600,
@attach_query_result_as_file = 1
END
--== Clean up our process by dropping our temporary table. ==--
DROP TABLE tempdb.dbo.ErrorLog -
Pre-Populate Data in HRMS Performance Management
Hi experts !
My question may be a bit basic as I am not an expert on HRMS but if anyone one can give me a hint , will really appreciate the help.
Our customer is using the performance management module (appraisals) for capturing the annual reports of employees. Moreover, the assignment history is also being captured. My question is regarding a use case. If an employee has performed her duties under a specific supervisor, her annual report is also suppoed to be written by that specific supervisor even if at the time of annual report e.g 1 Jan of each year, she has moved to the other department. Moreover, based on the nature of job, a group of employees have a specific appraisal form which we have customized.
My question is that is it possible in the standard performance management module that it automatically populates the dates an employee had performed under that specific supervisor and based on the job of the employee, the relevant form is also selected.
I hope my question makes a bit of sense and is answerable.
Really appreciate your response.
RegardsHi,
Check this link
http://help.sap.com/saphelp_crm60/helpdata/en/45/38f4f343194a2ae10000000a11466f/frameset.htm
it might be useful.
Regards
Prasenjit -
Performance manager-collection,flow
Hi, in the collection wizard I can't find port-channel interfaces ( ISLs ). But in the real-time monitoring I can monitor all ISLs and port-channels. How can I collect history of port-channels? I have also IVR configured and I am not able to setup flows for IVR source and destination. I don't see the devices in the flow wizard. I see only devices within a single VSAN. How can I do that? Thanks in advance for Your Help.
I opened a TAC case and the answer is:
Customer can create a collection with the performance manager for ISLs,
host, storage and the flows, not for the port channels. (Port channels
are not supported) The wizard is not able to be used for the the flow
creation for the IVR devices since the flow is created within a VSAN.
Unfortunately this is as designed.
I think it's really a very big problem when You can't monitor port-channels and IVR flows!!! That does mean this features are not usable in production environment where monitoring is a must!!! Why is this not written in the documentation on the first page with bold. It's really frustrating. Thanks for Your help.
Maybe you are looking for
-
Hi, Is there an option to preview your sequence on full screen? If only have one monitor? I don't mind that quality is less, It's just that sometimes you might want to look at things a little bigger without having a 2nd monitor. The closest I can see
-
Only display first form URL in formsweb.cfg . mutiple URL does not work
Hi Friends, I have 4 form application with 4 URL. app. server as 10g in window 2003. URL like as: http://salerpt.com/forms/frmservlet?config=emis-srmenu fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory fmb f
-
I can use the regular tabs, but new tabs will continue to open with strange things on them. One was marked as a Dangerous page by my anti-virus program (Trend Micro).
-
How does a public/private key encrypt and decrypt each other?
I understand the logic that when a communication takes place both parties pass their public keys to each other which is used to encrypt all messages. Once the party receives the messages the private key is used to decrypt them however I'm wondering h
-
I've read some of the posts in the forum related to installation problems, but could not find one that answered my problem. I'm just starting to develop in AIR, I have the SDK and using Adobe Flash. I can create Air applications and run them from the