Permission and access of applications

I have a principle question to permission and access, (in German Rechte und Zugriff)
I have create a list of my Applications with there permission.
I found 7 different groups of name of access, view to apps from admin window.
There are alway 3 different permissions per application
"My name" ( I ) = Admin.
Read&Write or this is no shown
Joachim = Standarduser.
Read&Write or this is no shown
staff
Only Read or this is no shown
System
Read&Write or Only Read or this is no shown
wheel
Read&Write or this is no shown
admin
Read&Write or Only Read or this is no shown
everyone
Read&Write or Only Read or this is no shown
All 40 Apple Application have:
System = Read&Write
admin = Read&Write
everyone = Only Read
Only by "System default" there is:
System = Read&Write
wheel = Read&Write
admin is no shown
everyone = Only Read
Service Applications I have no checked.
All Apple Applications the same systematics. The later buyed apps Aperture and iWork have the same permissions like the apps which are installation first of my Mac.
By the other non-apple-applications there is a chaos.
Have someone an idea what the systematic of permissions is.
Sometime I have installed the apps as standard user with rights of admin, that is possible.
My Mac works well but I would learn why is this chaos.
Thanks for helps or have someone a link to help document.
Jochen (.de)

These different permissions may have been created by you making changes. For example, "everyone" should never be r/w, but should be read-only. The DevonThink was probably installed via Drag and Drop in which case it would take on these permissions:
Owner=you with r/w privileges
Group=you or staff with r/w or read-only privileges
Everyone is read-only
The key thing here is that for all users to be able to run an application, then the application must have the owner set to system with r/w privileges. The other users can be read-only. The admin group is usually provided r/w privileges.
If an application has the owner set to a username, then only that user can access the application. For a single user machine where the user logs in either as admin or standard with the same username, then it doesn't really matter. It would only matter if a different user tried to use the application but did not have membership in the group.
Everyone is set to read-only because you don't want 'everyone' to be able to access and change files without supervision.
All 'admin' user accounts belong to the admin group. Only admin users who are also 'super users' have system-wide access.

Similar Messages

Trying to reload firefox and getting this message, when moving to the applications folder: "The operation can't be completed because you don't have permission to access some of the items."

Been having problems with Firefox/internet for several days, and all my updates seemed current. I decided to try to reload and have removed the other icons/download attempts from the app file. When I try to drag the icon into apps, I now get this message:
The operation can’t be completed because you don’t have permission to access some of the items.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I have version 3.5.11 and want to update to the most current firefox. I download but when I try to put it in my Mac applications, it says I dont have permission to access some of the items.

I have a Mac with snow leopard. I am using firefox 3.5.11 and want to install the most current version. I downloaded it and when I try to drop it on my applications it says I don't have permission to access some of the items.
== This happened ==
Every time Firefox opened
== I treid to update

Hello Curly59,
''"do you want to replace the newer version that is already installed with this older one?" ''
it is correct
1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
2. '''Trash''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded.
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac#os=mac&browser=fx19 Installing Firefox on Mac]
thank you

When I move this version (3.6.12) to the application folder I get a message saying that I "do not have permission to access some of the items." I am the administrator with read and write rights. Any ideas?

When I move this version (3.6.12) to the applications folder on a new i-Mac, I get the message that I "do not have permission to access some of the items." I do have read and write rights on all applications and hard drive. Any ideas?

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Problem with applications and accessing database

Hi
I have a serious problem with my applications.I was trying to change "users"'s folder icon so I changed the setting in information.I don'y know what I did but It made these problems:
many of applications does not open for example
itunes-->The folder "iTunes" is on a locked disk or you do not have permission...
picasa alerts me with a database error
yahoo messenger just pops up once and doesn't open.
firefox the same problem
net monitor alerts with a database problem.
evernote same problem
all of my address book is erased.
I think somehow I removed the db files or I changed the permission and the programs can not access to their db files.

don't know the last thing I have done was trying to change the icon and after that I found out about the problem.Maybe sth else caused the problem . anyway I copied all of my files to a new user and I removed the user with problems & everything is ok here.thank u all.

I Try To Go To A Website For My FB Games And i Get A Error Message Saying 403 Forbidden I Dont Have Permission To Access The Server. It Use To Work

You don't have permission to access /frontierville-cheats.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request
This Is The Message I Receive When I Go To This Website

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Access to application when external and internal address of EP are differen

I have a problem with access to application in portal. I deployed the application (ear) and it is available by address http://noss.inside.bcc.com.pl:54100/forum/index.jsp in our intranet. External address of portal is https://portal.bcc.com.pl. My application is unavailable outside the company, because in url iView there is an address of internal network. I've tried to use relative address /forum/index.jsp, but it doesn't work. Is there any kind of iView, which can solve my problem?

Hi Julia,
have a look at this Topic: <a href="https://forums.sdn.sap.com/thread.jspa?threadID=65920">How does portal connect a user to internal web site</a>. Basically it is the same problem. Unfortunately Jeremy had not described the solution in detail.
Regards
Gregor

My iPhone 4 has been saying You do not have permission to access the requested resource whenever I try to watch one of the episodes I bought from iTunes. It will not let me watch them and I don't know why.

A few days ago I bought a season of the series Psych off of iTunes. I was able to watch the first bunch without a problem but now all of a sudden when I try to watch one it says "You do not have permission to access the requested resource". I tried restarting my phone but that do not help. I cleared up a lot of space on my phone as well. I have and iPhone 4 with the update of iOS 6.1.3.

Are you using the same Apple ID that the purchase was linked to? I had this issue with a shared device, and the other person had logged out of my ID and logged in with hers.
If it's the same ID, then try redownloading the purchase.

I just purchased a new laptop and I am trying to transfer my ITunes library to my new computer. When I log into ITunes on my new laptop and enter my Apple ID password, it says AppleID does not have permission to access iTunes Connect. What do I do?

I just purchased a new laptop and I am trying to transfer my iTunes library to my new laptop and Apple is saying Apple ID does not have permission to access iTunes Connect on my new laptop. How do I get my library transferred to my new computer? Please help!

allears2 wrote:
I just purchased a new laptop and I am trying to transfer my iTunes library to my new laptop...
To have EVERYTHING on your New computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.

I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..

I'm trying to install a cd application and I keep getting the message 'you do not have permission to use the application FSP OS X' Even after selecting always allow and entering my login details it still won't accept it. Help!!..

Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
Best of luck.

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

I'm trying to download my Master CS6 onto a new hard drive because my old one crashed and I keep getting a message saying " Cannot write the file" or "I don't have permission to access the requested resource." ? What does this mean?

Yes- it is a Mac. I went through adobes system requirements and re- downloaded supportive software. The notice seems to happen near the end of the down load with the messages above. I'll look into your suggestion. Thank you- appreciated.

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

I have created another user on our iMac but cannot figure out how to access aperture, excel and other purchased applications on the new desk top

I have created an additional user on our iMac and have tried to set up file share but nothing happens. I have an empty desktop and only the applications that came with the computer appear. I'd like to have access to the others that we've purchased... Aperture, excel, etc. I've followed the instructions for file sharing but I must be missing something.
Thanks for any assistance.

Rebecca1952,
You are over complicating things. File sharing has nothing to do with what applications that each user has access to.
To me it sounds like you just need some basic help getting the applications that you need onto your dock.
Try this:
Login to you new user account
Click on an empty part of your desktop
Click on the "Go" menu and select "Applications"
A Finder window should open showing ALL of the applications on the Mac.
Double-click one of them that you will use frequently (e.g. Excel)
Once it is up and running you should see it's icon down on your dock.
Right-click that icon on the dock, then select "Options", and "Keep in Dock"
Once you have added each application to the dock in this manner, then it will remain there even after you quit the application.
For one more expert way to launch any application on your mac quickly, try this:
Hold the [command] key and hit the [spacebar] (this will start a Spotlight search)
Start typing the name of the application you want to run (e.g. "Aperture")
Once you see "Aperture" selected, simply hit the [return] key and Aperture will launch
Hope this solves you problem.

Customised Oracle Application and access to roles - Discoverer 10.1.2.0.2

Hi Gurus!
We are developing a customised Oracle application where we have users and roles...user - role mapping is done in the system administration module of the application.
Now, we are also developing Oracle discoverer reports based on this. Using 10g (10.1.2.0.2) for that.
When I am creating an EUL, I select 'New EUL for Oracle Applications users only' option, but, I do not have any 'FND schema' to specify. That's where I'm stuck up!
I want to give access to the 'roles' in tha same manner as I would give to the 'responsibilities' in Oracle Apps. But, I don't know how to do it here.
Can someone guide me on this?
Thanks and regards,
Aparna

Hi Aparna
If your application is not E-Business Suite you cannot install Discoverer into Apps mode. This mode is reserved for applications which are E-Business Suite, which basically tells Discoverer to use authenticate users using the FND tables owned by the APPLSYS user.
In your case, even though you appear to be using Oracle applications, because you want to take advantage of your roles you will have to install Discoverer into standard mode. As you are creating your EUL you need to uncheck the box which says grant access to PUBLIC and make this a private EUL. Then you will not have the headache of worrying about setting up new users. You simply manage what a role can do (Tools | Privileges) and what a role has access to (Tools | Security).
Now, when any any user connects to Discoverer their role will be evaluated and access will be restricted.
You can do the same thing using a PUBLIC EUL, except you need to reduce what that user can do (Tools | Privileges) to an absolute minimum, and then take control of this using roles. For example, you could have a set of functional roles, one each for say AP, AR, GL and so on, but you could further break this down by privilege, thus you could have roles called AP Viewer, AP User, AR Viewer, AR User and so on. The User roles would have full access while the Viewer roles would have a much reduced set of privileges.
You are basically setting up the Library approach that I discuss in my Discoverer 10g Handbook and in my white paper which you will find on my downloads page here: http://learndiscoverer.com/downloads/downloads.htm.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Customised Oracle application and access to roles and users...please advise

Hi Gurus!
We are developing a customised Oracle application where we have users and roles...user - role mapping is done in the system administration module of the application.
Now, we are also developing Oracle discoverer reports based on this. Using 10g (10.1.2.0.2) for that.
When I am creating an EUL, I select 'New EUL for Oracle Applications users only' option, but, I do not have any 'FND schema' to specify. That's where I'm stuck up!
I want to give access to the 'roles' in tha same manner as I would give to the 'responsibilities' in Oracle Apps. But, I don't know how to do it here.
Can someone guide me on this?
Thanks and regards,
Aparna

Hi Aparna
It would appear that you posted the same question on the Discoverer forum. Here is the answer that I posted there:
If your application is not E-Business Suite you cannot install Discoverer into Apps mode. This mode is reserved for applications which are E-Business Suite, which basically tells Discoverer to use authenticate users using the FND tables owned by the APPLSYS user.
In your case, even though you appear to be using Oracle applications, because you want to take advantage of your roles you will have to install Discoverer into standard mode. As you are creating your EUL you need to uncheck the box which says grant access to PUBLIC and make this a private EUL. Then you will not have the headache of worrying about setting up new users. You simply manage what a role can do (Tools | Privileges) and what a role has access to (Tools | Security).
Now, when any any user connects to Discoverer their role will be evaluated and access will be restricted.
You can do the same thing using a PUBLIC EUL, except you need to reduce what that user can do (Tools | Privileges) to an absolute minimum, and then take control of this using roles. For example, you could have a set of functional roles, one each for say AP, AR, GL and so on, but you could further break this down by privilege, thus you could have roles called AP Viewer, AP User, AR Viewer, AR User and so on. The User roles would have full access while the Viewer roles would have a much reduced set of privileges.
You are basically setting up the Library approach that I discuss in my Discoverer 10g Handbook and in my white paper which you will find on my downloads page here: http://learndiscoverer.com/downloads/downloads.htm.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Permission and access of applications

Similar Messages

Maybe you are looking for