PGI-profit center

Hi All,
We have activated the split valuation for material code (XXXX)
Material Code1---------- Split valuation “”A”” No costing Views
Material Code1----------- Split valuation “”B”” No Costing Views
When we are doing the PGI for the above material codes. System is not picking the profit centre from the material master (unable to maintaining costing views due to split valuation)....
Please help...
Thanks

Hi
As Ajay rightly pointed out, you can create costing views independent of the valuation type.
Try using MM01 and just select plant (do not enter valuation type) and then choose the costing views, you should be able to maintain it then.
Once done, I am sure the same profit center would be used in PGI.
However if your requirement is to have different profit center per valuation type, then I can only think of using Ztable for this purpose. You cannot save multiple profit centers in the same material master (Table MARC)
In this case, you can use subsitution as suggested above, by selecting BSEG-MATNR, BSEG-WERKS & BSEG-BWTAR combination in your Ztable to derive correct profit center.
Hope the above information was useful
Regards
Mustafa

Similar Messages

Goods issue (PGI) profit center substitution

Hi All
I am creating a PGI. and the following account doc was created
CR 100(stock account) 100$ Prctr A
DB 200(COGS account) 100$ Prctr B
I have written substitution rules to substitute prctr B. And I can see the profit center B in account assignment tab in sales order. But it is not getting defaulted on the stock account line. It is getting defaulted only on the COGS line. Profit center in the material is getting defaulted on the stock line. Is there any way to default the profit center from account assignment tab in sales order on to stock line item.
Thanks
Steve

you can check whether any of the BSEG fields capturing Sales order profit center? If so, you can use that field.
If not, then you can create a user exit. you can identify sales order account assignment profit center field. Ask your abaper to fetch the profit center using sales order and populate in FI substitution.
hope this may help you..
thnx

PGI: Profit Center Substitution / BAdI

Hello Experts!
I am facing a problem in applying an Enhancement. The requirement is to substitute profit center of the receivng plant (for freight line item - accounting docuement) with the profit center of the supplying plant while doing the PGI.
As per my knowledge, there are two ways to acheive this:
One is to write a FI Substitution exit. I have done this using GGB1 / OBBH both at Line Item and Complete Document level. The Substitution exit has BSEG structure in scope, but it doesn't gets triggered at all. I guess FI Substitutions work only for diret FI postings and not for postings which involve integration with other modules (please correct if I am wrong). So during PGI, it is not getting triggered, for Statistical Posting t.code it works.
Second way is to implement the BAdI AC_DOCUMENT I tried implementing the BAdI and putting a breakpoint. It comes into play while doing a PGI but the data available in scope doesn't contains required fields (PRCTR); so we are not able to substitute the profit center using this. According to an SAP note too, the BAdI can be used to acheive this.
Please help on this.
Thanks and Regards,
Aabhas K Vishnoi

Hi,
Go through the link
https://forums.sdn.sap.com/click.jspa?searchID=12702563&messageID=4861653
U can use the User-Exit: EXIT_SAPLV60B_008
And write required code in Include ZXVVFU08
Regards,
Raj.

Profit Center Problem in case of PGI after delivery

Hello All,
The problem is related to Stock Transfer Order (STO) between two plants which is as follows -
When a PO is raised for Material 1 the Profit Center is maintained in the material master in the Supplying Plant A but not maintained in the material master for Material 1 in the Recipient Plant B.After Delivery & PGI when posting is checked it is observed that In case of Supplying Plant A inventory a/c is getting credited reflecting the assigned profit center while in case of Recipient Plant B inventory a/c is getting debited but the profit center field remained blank.Is there any configuration possible to check/restrict the PGI posting when the profit center is not getting reflected in the recipient Plant without making the profit center field as 'mandatory' in the General Plant & Storage Data of the Material Master??
Please suggest at the earliest.
Thanks & Regards
Priyanka Mitra

Hello Sangram,
thank you for your fast reply.
It is not about the amounts. They are correct.
I got confused regarding the change of the profit center numbers on the level of the GR/IR.
KR
Thomas

Change in mseg table field prctr & pprctr (profit center & part. prft center) during pgi (vl02n) in case of stn

Dear sir,
i want to change in profit center & partner profit center at the time of PGI (vl02n) in case of stock transfer
for that i m using MB_DOCUMENT_BADI badi with method MB_DOCUMENT_BEFORE_UPDATE
but
there is no effect in table field mseg-prctr & mseg-pprctr
want to change
if prctr = 1200 & pprctr = 1800 then change pprctr
pprctr = 1900
pl. suggest me what to do .
i have check scn discussion but i did not get suitable point to implement.

Hi
Check before SAP Note 978159 - Problem with profit center determination
I hope this helps you
Regards
Eduardo

Error Message-- For Balancing field "Profit Center" is not filled

Hi All,
When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
A PGI for the DNXXXXXXXX is not possible!
Can u please help me how to resolve this issue ?
WM Baby

Hi,
AS per configuration , there is prifit centre assignment .Enter the profit centre in the field of profit centre by the help opf F4.
Regards,
Andra

Changing Profit center in Sales Order after Shipment Document

Hi All,
We have situation here, The thing is at the time of creating Sales order I don't know the profit center which has to be assigned for example, I have created a sales order for goods transport, when I create the sales order I don't know which vehicle is going to transport this order and the goods can be transported by multiple vehicles.
For my business each vehicle is a cost and profit center since I wanna know the profitability of each vehicle.
So I will come to know the vehicle ( Profit center) after creating the shipment document, now I want to have the profit center of this vehicle to be updated back in the sales order so that the Billing (revenue) is recorded in this profit center.
Please let me know how to do this. I know the PC field is greyed out after shipment and PGI is done. So how to handle this.
Your suggestions will be highly appreciable
Regards,
Satan

Hi,
Thanks
If I went with internal order every where I gotta enter the internal order since it doesn't get automatically derived like a profit center. I would have to define substitutions everywhere !
I am trying to capture all the costs and revenue for each transport vehicle since this is transport business. It's not like my business is something else and vehicles are a part of it.
Almost all transactions will have to be posted with Internal order which is very difficult to configure.
Can you please elaborate on the work around you have mentioned since I am neither technical nor SD consultant.
Thanks in advance

Defaulting profit center from sales order while doing delive COGS line item

HI All
In my company COGS account is a cost element.when PGI(post goods issue) was posted, sap will automatically create an accounting dcument
CR:stock account ( profit center from material master data or from sales order)
DT:Cost of goods sold ( profit center from cost center master data)Can we default profit center from material master data(or from sales order) in the COGS line item
Thanks in advance

What is your current Version? Is it ECC6 and New GL implemented? Document split configuration will help you.
If you are not using ECC6 and New GL, then try T.Code 3KEH and determine profit center based on Valuation area. OR
You may look into GL Line item level, Write a Validation Rule to select profit center.
Hope this will help you.
Thanks
VR

Profit center substitution in Goods issue document

Hello Gurus
I am determining profit center through the profit center substitution in sales order through 0KEM transaction and activated it in 0KEL as activation 3.
I have taken the fields as sales organization and sales office with transaction code VA01 and VL02N .
After this the substitution happening in sales order and also in delivery but the substitution is not reflecting in the goods issue document neither coming for inventory nor in COGS anyway but it is reflecting in the FI accounting document but not for customer but for sales.
Please help me to with your kind suggestion for resolving this issue.
I need the substituted Profit center also to come in the accounting document of PGI and for customer in FI accounting document.
Thanks in advance
Subu

Hi Subbu
1. 0KEM works for sales order and related billing.. It does not work for PGI, unless you are in MTO scenario and sales order is CO object
2. At PGI - Inventory a/c will be Cr with PC in Mat Master... COGS (If not a cost element) will also be Dr with the same PC
If you are in MTO, the COGS will be posted to sales order and hence, it will have the same PC as sales order
3. During Billing, revenue a/c is Cr with PC in sales order... Customer line is never shown with PC in the line item....
- If you are on EC-PCA, you need to run 1KEK at month end...
- If you are on New GL + Doc Splitting, PC will be shown in the "General Ledger View" in customer line item... the "Entry View" wont have any PC
BR,Ajay M

Substitution of Profit center at the time of goods issue for consumption

Dear All,
We have a requirement of changing the profit center at goods issue level i.e. when goods is issued for consumption, it will pick the profit center maintained at Sales order level instead of picking Profit center maintained in Finished Goods.
In our case, we have to maitain the profit center in the finished goods but the problem arises when we put the different profit center in sales order in place of FG Material master PC, then at the time of PGI & billing, system picks the PC maintained at sales order but the problem starts when we issue the goods for consumption i.e. it picks the FG material master PC.
Can we go for substitution for it? but for substitution, i dont have any idea how it works & how to create it?
Kindly do the needful asap.
Regards
Anuj

ok

Substituting Cost of Goods Sold Account Profit Center

Hi
I am using Sales Order substitution to change the Profit Center according to Sales Org + Product Hierarchy + Customer Group + Acct Asst Grp. This perfectly replace the Profit Center in Sales Order. The Profit Center from Sales Order is perfectly flowing to Outbound Delivery.
While doing PGI, in accounting document, Cost of Goods Sold line item is not getting the profit center from outbound delivery. It post COGS line item with Material Master profit center. We want profit center of Cost of Goods Sold line item is same as Sales order / Outbound Delivery.
I checked SCN, everyone provided the solution of using FI Substitution to change the Profit Center of COGS line item.
Is it any other way it can be achieved? if FI Substitution is only the way, can anyone provide the sample code, so that it can be developed fast.
Thanks
Venkat Ramachandran

For those who may need an answer to this, our solution was the following:
1)       Created new types for SO, SO Item, Sched. Line, Delivery, Delivery Item, Billing type
2)       Created new Pricing procedure
3)       Created new movement type Y61/Y62 modeled after 601/602
4)       Mapped Y61/Y62 to account modifier ZAX.
5)       Mapped GBB/ZAX to the new account.
Benefits, they now have better view of the orders going inter-company. It is flexible enough to adjusting prices for intercompany separate from standard orders, even though for now it is a straight copy of cost. They are able to remove the sales/use tax, from the calculations. They are able to plan with these orders separated out. Plus, this will standardize their process for inter-company.
Hope this helps someone.
Cheers!
Rick

Substitution for profit center for credit line item

Hi
There is some common material sold in two segments. (Example head phone is sold from cell phone segment and computer segment). These segments are created as a division also for SD purpose.
Now for determining the profit center, i am using the validation rule. Logic: if the division in sales order is cell phone, entry should be posted in cell phone division. So my revenue and PGI will be in cell phone segment.
When head phone was procured, it was procured in computer segment (division). So my inventory credit should be the posted to computer segment (via profit center) and consumption should be posted to cell phone division (for matching with revenue). Hence i want some substitution rule for posting to two different profit center ( or segments, determined by profit center) at the time of PGI. Debit (consumption) should be to the profit center for cell phone and credit (inventory posting) should be to profit for computer.
Please help.
Edited by: Meenu_ND on Jun 23, 2011 8:02 PM

Hi
In an ideal scenario, profit center is derived from material master. Since, your business is such that profit center is nto known as unique for a material master, try using the following BADI to derive profit center at the time of Goods movement document. You should not maintain profit center in material master in such a case.
MB_MIGO_ITEM_BADI
MB_MIGO_BADI
Regards
Sanil Bhandari

Picking DUMMY Profit Center in COGS line item

Dear All,
My Client is on ECC6 and document splitting is activated.
My problem is, in current month we have created on Finishd good(Material) and done PGI but dont know why system is picking dummy profit center in line item of COSG only, in line item of material profit center is proper.
1. Profit center is assigned in Material Master.
2.No User Exit is applied
3. No Validation & Sub-situation done.
4. No FAGL3KEH setting is done.
COGS Ac Dr 100 PC Dummy
To Inv of FG 100 PC 2000
Other material created in same valuation class is working properly.
Regards,
Shayam
Edited by: Shayam_210 on Aug 23, 2011 9:13 AM

Hi, to find bugs like these is always "triggy" and I am afraid that there are no easy solutions!
You could try to go in TC GGB1 - go down to the substitution in "Create sales order" and there "activate total trace" or perhaps Expert trace - set breakpoint. After you done those go in and create the sales order again in the same session.
In order to be successful here ... will you need the help of an ABAP'er.
I believe the error to be related to master data as itu2019s usually are u2026 but sometimes are there a bug in the system.
Good luck
René V. Nielsen

Profit center segment characteristics fileds activation.

Hi All
Where we can activite (t.code or path) Profit center segment fields (charasteristics) while generation of Sales order.

Hi,
Profit Center field should normally be available in Sales order line item in Account Assignment tab. If it is not visible, please check the field status group of Revenue GL Code. (Profit center field should be made optional). Also check the settings of Movement type 601 (hope this is the movement type which is used when PGI for this Sales order is done)
Please revert if it helped.
Regards
Vineet
Edited by: Vineet Bhardwaj on May 1, 2010 7:31 PM

Segment & Profit Center Activation

Hello Gurus,
Could you please forward me some good links on Segment & Profit Center Activation.
ie How & Where to configure for Segments?
& How & Where to configure for Profit Center Activation?
If you can help me on this, it will really be very nice of you.
Thanks in Anticipation,
Warm Regards,
Debojit Dey

Hi,
Profit Center field should normally be available in Sales order line item in Account Assignment tab. If it is not visible, please check the field status group of Revenue GL Code. (Profit center field should be made optional). Also check the settings of Movement type 601 (hope this is the movement type which is used when PGI for this Sales order is done)
Please revert if it helped.
Regards
Vineet
Edited by: Vineet Bhardwaj on May 1, 2010 7:31 PM

PGI-profit center

Similar Messages

Maybe you are looking for