Phone is disconnecting from the "radio service" cant reconnect

I've lost my email and BB IM capabilities. Connection Manager says the radio service has been "turned off" I can't figure out to ' turn it back on"

My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
It did my head in for months.
Thanks guys, because of you, I worked this out. My Forester needed the "handsfree" setup, not just a Bluetooth pairing. Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
But only to initiate the hansfree component.
From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup. Because I'd done this originally, my old phone was in here. Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone. Now it auto connects everytime I get in the car
Woohoo.
Johnny

Similar Messages

Disconnecting from the BES; curve 8830

After troubling my IT guy to connect me to my BES, I now realize that it interferes with too many of my thrid party applications (like ascendo money). How do I disconnect from the BES once my device has been established?
Solved!
Go to Solution.

Use BlackBerry Desktop Manager to make a backup of your BlackBerry so you don lose anything.

My iPhone5 won't reconnect to my Subaru Forester Bluetooth radio. I have to go and delete the iphone from the radio and pair the phone and radio everytime. I never had this issue with my samsung

I have a 2012 Subaru Forester and when I get in, my iPhone5 won't connect to my Bluetooth radio. I have my Bluetooth radio knows about the phone, but the iPhone5 just won't connect. I have to go and delete the iPhone5 from the radio memory and then pair the radio & the iPhone5 again, then it connects and works great until I shut off the car. Then when I get back in or restart the car I have to go through this all over again. Anybody got any ideas? It is driving me crazy and i just got my iPhone5 a week ago. Now I am not a real iPhone Savvy user, so it may just be something I have not set properly. So can some one Help? Please!

My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
It did my head in for months.
Thanks guys, because of you, I worked this out. My Forester needed the "handsfree" setup, not just a Bluetooth pairing. Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
But only to initiate the hansfree component.
From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup. Because I'd done this originally, my old phone was in here. Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone. Now it auto connects everytime I get in the car
Woohoo.
Johnny

Why do applications (Illustrator, Pages, Mail) launch so slowly with spinning ball (about a minute to 90 seconds) when Mac is connected to our LAN, but when I disconnected Mac from the LAN, those applications launch instantly and function normally?

I hope I'm submitting this properly, I apologize if this irritates anyone because of improper etiquette. Why do applications (Illustrator, Pages, Mail) launch so slowly with spinning ball (about a minute to 90 seconds) when Mac is connected to our LAN, but when I disconnected Mac from the LAN, those applications launch instantly and function normally? This is a condition which seemed to start just recently and abruptly. These applications reside on, and are launched from the startup drive, not from a network drive. Also, we have a NAS drive on the LAN that we connect to that also takes a minute or two to mount, when it used to (before this problem) mount on the desktop in a matter of about 5 seconds. We have three identical Mac Pros on the LAN, and they all have this problem when launching and using the above mentioned applications. When I physically unplug the network cable from the Mac, all applications launch instantly and function normally. I know very little about networks, so I can't begin to test or change any setting pertaining to our network - if that is where the problem lies. The only recent change to our network situation is that we lost or our internet and phone service due to massive flooding here in Minot, North Dakota (our ISP tells us the communication lines are under water and shorting out). But shouldn't our LAN still function even though we have lost our connection to the outside world? Thanks so much, in advance, for helping me solve this problem. Sheldon.

Hi there.
A slow LAN can have many things so its going slow.
1) is your lan 1gbit speed? (full duplex)
2) are the macs also 1Gbit speed? (full duplex)
3) does your nas has a firewall? (so you can see what the mac asking there)
4) on the macs is the firewall on? (does the programms can pass the fw?)
5) how big is the nas and how many files/dirctorys are on the nas? (big folders speeds down )
many questions, but sometimes there is a solution.
regards tim

Server 2012 R2 - No response from the UmRdpService service and more...

Hi!
We have a Remote Desktop Services Deployment with the following:
LIC01 – Windows 2012 R2 - Licensing
RDCB01 – Windows 2012 – Connection Broker
RDWA02 – Windows 2012 R2 – Web Access
RDG01 – Windows 2012 R2 - Gateway
RDG02 – Windows 2012 R2 - Gateway
RDG03 – Windows 2012 R2 – Gateway
RDSH01 – Windows 2012 R2 - Session Host
RDSH02 – Windows 2012 - Session Host
RDSH03 – Windows 2012 R2 - Session Host
RDSH04 – Windows 2012 R2 - Session Host
RDSH05 – Windows 2012 R2 - Session Host
RDSH06 – Windows 2012 R2 - Session Host
RDSH07 – Windows 2012 R2 - Session Host
RDSH08 – Windows 2012 R2 - Session Host
RDSH09 – Windows 2012 R2 - Session Host
RDSH10 – Windows 2012 R2 - Session Host
We have two Session Collections:
Office-R2 (All Server 2012 R2 RDSHs)
"Office (RDSH02, Closed for users)"
User Profile Disk are enabled to a SOFS Share (Server 2012).
Client Settings: Everything except "Plug and play Devices" are enabled
Problem:
Suddenly, one or more of RDSH
servers (in the Office-R2 Collection) get the following error:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
After this, we get similar error messages
to other services, such as:
AudioEndpointBuilder, NcbService, ScDeviceEnum, WPDBusEnum, Netman
Users logged into the server, looses Redirection
services as local drives and local
printers, and they also have problem signing out of the server. (Hangs on signing out)
New Users that tries to sign in to that server are also having trouble (Hangs on signing in).
After using the logoff tool to sign out every user on that server, I end up With the following:
It
appears that there are no users logged on,
yet there are many Disconnected sessions...
Looking at the SOFS file share I still see that RDSH04 has read/Write to the .VHDX file that hold the User Profile.. And If the user try to log on to another server in that Collection, it get a temporary profile.
If I kill the Conncetion to the VHDX files, Users can then sign in normally to another node it that Collection.
Trying to restart the server With "Shutdown -r -t 0 -f" does not work, It just hangs on Shutdown (waited 3 days), so All I can do is Press and Hold.We
have also seen BSoD on these nodes, but I'm sure if they are related to this error:
WinDBG is saying:
BugCheck 3B, {c0000005, fffff803538fa84e, ffffd0002711cb00, 0}
Probably caused by : dfsc.sys ( dfsc!DfscCacheStore+6f )
I found https://support.microsoft.com/kb/2925981 and
http://support.microsoft.com/kb/2525246, but they are not for Windows Server 2012 R2.
Any Idea?
Thanks
Anders

Hi,
Firstly, dfsc.sys indicates the DFS clients. It means that your systems use DFS service to access the file share.
Please let us know if you configured the DFS service on your file server.
Also, what is the format of file path you configured for UPD?
\\FileServer\FileShare
Or
\\Domain.com\DFS NameSpace\File Share
Thanks.
Jeremy Wu
TechNet Community Support

HT1222 I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

I got disconnected after the release of the last update! I'm disconnected only from the app store and itunes. Do i have to update to activate my account? What to do, i'm stuck.

Have you restarted your phone?
If so, try a reset. Press and hold the home & sleep/wake buttons until the screen goes blank, ignoring the power off slider if it comes up.
Check for the app again after the phone starts back up.
~Lyssa

N97 - No log-in from the VOIP service menu

I am stuck though I have followed Nokia's procedure for configuring my phone for VOIP calls: Log-in from the VOIP service menu doesn't happen. My SIP-profile is registered. However, I have two VOIP services defined (two globes) with the same name as a consequence of a problem when installing "S60 5.x SIP VoIP 3.1 Settings", then reinstalling, and I do not know how to delete one (the other displays my username correctly). Under the globe, the following text is displayed "Contact not on the contact list. To add, select 'Add fro..." and no more. My phone is a N97 RM-505 with software version 21.0.045. Would appreciate any help. Thanks

This is a peer-to-peer community, and as such is not the proper discourse for legal matters or any customer service issues.
The point of sale is always the first point of contact with regards to your warranty. The retailer are responsible (fully) for any and all warranty options a customer has available to them. The only other options are available on the 'Contact Us' page at;
http://blackberry.com/contact
Thank you for using the blackberry community forum.
Jakoby4204 New to the Community click here
Community Moderator

I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
Any suggestions?

Dear all,
(THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
RUN A FULL BACK UP BEFORE DOING ANY OF THIS
1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
2. Connect your iPhone 4S to iTunes.
3. Once connected, two options will show: ‘restore’ and ‘check for update’.
4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’ (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
A full back up is recommended before firmware upgrade.
HOPE THIS HELPS

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

Unable to retrieve collections from the Search Service.

Hi,
I have a user trying to upload a collection. She gets the
following error:
Unable to retrieve collections from the Search Service.
Please verify that the ColdFusion MX Search Server is
installed and running.
Obviously, I checked the service. It was running. I restarted
the service. That did nothing. I restarted all the CF services.
Didn't fix the issue. I also rebotted the server, not expecting
that to work. It didn't.
Checking the server logs, I see this:
The description for Event ID ( 105 ) in Source ( ColdFusion
MX 7 Search Server ) cannot be found. The local computer may not
have the necessary registry information or message DLL files to
display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support
for details. The following information is part of the event:
ColdFusion MX 7 Search Server.
Also, after talking to my co-worker more, it turns out this
occurred right after she uploaded a new collection to the
administrator. This link sounds similar to what I'm experiencing:
http://kb.adobe.com/selfservice/viewContent.do?externalId=6c6881a9
Maybe it's a corrupt collection?
but I don't see any errors in the log
(:\CFusionMX7\verity\Data\services\ColdFusionK2_indexserver1\log\status.log)
Finally, there are some errors in the Verity service, and it
looks like the Verity service Verity K2Server (Version 2.20pr6)
points to D:\CFusionMX\lib\k2server.exe, which doesn’t exist
anymore because we’ve upgraded to MX7.I'm not sure if this is
an old service left over from before we upgraded from CFMX to
CFMX7.
We are running CFMX7 on a Windows 2003 Server SP1 if that
matters.
Thanks in advance for any help.

In the left hand panel of the ColdFusion Administrator expand
the Data & Services link. Then select the Verity K2 Server
link. Change localhost to 127.0.0.1 in the Verity Host Name
textbox.
Ted Zimmerman

Unable to read data from the SAP Service Marketplace issue

Good morning, experts.
I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
It is probably due to wrong settings, but I can´t figure it out. My settings are:
Address: https://websmp205.sap-ag.de/
User name: S0005951541
Password: (my password)
Proxy (my proxy settings)
Any ideas?

Thanks for your answer.
I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
As long as I have more information I am going to repost this issue on a new forum.
Thanks.

My 4s continues to lose wi-fi and reverts to 3G even when the phone is 4 ft from the router.

My 4s continues to lose wi-fi and reverts to 3G even when the phone is 4 ft from the router. Is this a defect in my phone? It happens when I am home and I switch to my wi-fi. It doesn't matter where the phone is in relation to the router. Please note, I have my phone set to NOT sleep. Does any one know why my phone reverts to 3G? I have to manually set it to wi-fi every time this happens.

I have the same issue with my iPhone 4s. It was not an issue when I was using iOS5, but it started once I upgraded to iOS6 and the recent update of iOS6.0.1 did not fix it. Judging from the release notes, Apple thinks this is only an iPhone 5 issue, as they say they fixed it for iPhone 5's.
I have an iPad 2 (iOS6.0.1) and a 3rd generation iPod touch (latest iOS5 release), as well as an Apple TV 2. None of the other devices have this problem and they are all on the same network.
Something interesting... my iPhone 4s works fine on the wifi where I work. At home, it continually turns on and off. My home network is using a Netgear router (WNDR3400) and the iPhone is connecting to it using WPA2+PSK protocol. Hopefully, this information can help Apple figure out the problem.
(I remember my iPod Touch having a similar issue a few years ago with iOS 4, when I had a different Netgear router using the same security protocol. I think iOS 5 fixed it for the iPod Touch... I wonder if some Apple products have an issue with Netgear Routers using that encryption.)

TS3376 how do i take my phone off lock mode from the lost and track

how do i take my phone off lock mode from the lost and track

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

Just got an e mail to say that my Apple ID was just used to download photoshop touch for phone for 2.99 from the App Store with a receipt number. Is this a scam for me to give my Apple ID?

Just got an e mail to say that my Apple ID was just used to download photoshop touch for phone for 2.99 from the App Store with a receipt number. Is this a scam for me to give my Apple ID?

No but there's a link to reset your password. Etc etc..
This is the email I got.
"Your Apple ID was just used to download Photoshop Touch for phone £2.99 from the App Store on a computer or device that had not previously been associated with that Apple ID.
If you initiated this download, you can disregard this email. It was only sent to alert you in case you did not initiate the download yourself.
If you did not initiate this download, we recommend that you go to iforgot.apple.com to change your password, then see Apple ID: Tips for protecting the security of your account for further assistance.
Regards,
Apple"

The green PHONE icon has dropped from the bottom of the home screen and isn't among the icons that I have installed. I can get to it by searching but how do I get it back on the bottom of the home screen?

The green PHONE icon has dropped from the bottom of the home screen and isn't among the icons that I have installed. I can get to it by searching but how do I get it back on the bottom of the home screen?

Reset home screen layout.
This is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Phone is disconnect​ing from the "radio service" cant reconnect

Similar Messages

Maybe you are looking for

Phone is disconnecting from the "radio service" cant reconnect