Photo Template Question

Hi! I used the photo template to create my iweb web site. In doing so, I placed my own pictures on top of the template photos in some cases. Then I hyperlinked my pictures to files. Click the picture and a file downloads. This is good, but when I access my web site and while my pictures are downloading, the template photos are displayed until my pictures cover them when downloads are done. Question - How can I remove the template photos? Please advise, and thanks.
gingermae

Is downloading a file hyperlinked to a photo your intended purpose? If so, then you might be better off not using the photo template. But I understand if you like the look of the photo template. If you want to continue using the template, then instead of using your photo to "cover" the template photo, go ahead and drag your photo over the template photo and hover until you see your cursor turn to a "+" sign. Then let go and your photo will replace the template photo. Since you cannot apply a hyperlink to a file download to the template, you will then need to insert a rectangle shape...make it the same size as the photo...and then lay it on top of the photo. Open up the Inspector and use the Hyperlink tab to attach the hyperlink to file to this shape. Then click over to the graphics tab and adjust the opacity of the rectangle shape to 1% to let your template photo show through. This should replicate the function that you currently have but replace the template photos with your own.

Similar Messages

Disabling enlargement of photos in iweb's photo template

If using the photo template in iWeb, double clicking on a photo enlarges it. I was wandering if it is possible to disable this function so as to only use it as a thumbnail viewer?
Thanks

Cyclosaurus posted some code to get rid of the thumbnails in that view so it's probably possible to remove the large version and keep the thumbnails only. The post is here: http://discussions.apple.com/thread.jspa?messageID=8318600&#8318600. You can post a question there to him on reversing the object of the code.
If you only what to display small versions of a number of photos you would have a smaller site and page if you just resized the photos to the size you wanted outside of iWeb and added them to a blank page.
OT

Problem adding photos to a photo template page

I am using iWeb 3.0.4. After selecting a Photo template page I tried to drag an iPhoto event from Media sidebar that has 32 photos in it to the photo place holder on the page. Only 9 of the photos were transferred. Trying to drag any other photos, even a single photo, caused a text box with the name of the photo in it to be placed on the page and the Inspector window to open with the Link tab active.
Does anyone have any ideas on why or what to do?

Your library is damaged and my not be able to be totally recovered, i.e. recover albums, slideshows, etc. along with the photos.
If the original files for your photos are inside the library package (even if iPhoto can't display them) the following should create a new library with all of your photos.
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Check it out carefully to see if all of your photos are represented in it.
Your current library will still be available for further fix attempts.

Web Photo Templates in Dreamweaver 8

Hi !
I'm trying to set up a photo album that uses the same CSS
template that I use for the rest of the site. I know I will have to
modify it but that's not the problem. I can't find the Photo
Templates folder that is referenced in Jolantha Belik's Web Photo
Album tutorial. She provides the following path : C:\Documents and
Settings\.....\Macromedia\Dreamweaver MX\Configuration\Photo
Templates\ however I can't find the Photo Templates folder
anywhere.
I know it's somewhere on my box as I can see the vanilla
templates but I can't find them either when I search using Google
Desktop.
Help?
Thanks in advance,
Jim

Jim,
This TechNote explains where to find the User Configuration
folder:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16420
HTH,
Randy
> I'm trying to set up a photo album that uses the same
CSS template that I use
> for the rest of the site. I know I will have to modify
it but that's not the
> problem. I can't find the Photo Templates folder that is
referenced in Jolantha
> Belik's Web Photo Album tutorial. She provides the
following path :
> C:\Documents and Settings\.....\Macromedia\Dreamweaver
MX\Configuration\Photo
> Templates\ however I can't find the Photo Templates
folder anywhere.

Can 'SUBSCRIBE' be removed from photo template pages in iWeb??

I am using photo template pages on my website (designed in iWeb 08). My site is an artist portfolio site so the photo template pages work well for dealing with all the art images I am posting.
One problem: there is a subscribe button on my pages which lets people subscribe to my iPhoto library. I cannot figure out how to remove it.
Any ideas on this?
Thanks!
Christine

Christine
Click on the Inspector at the bottom of your photo page, then click on the Photos Inspector (just to the left of RSS).
Next click on the Photos button, then uncheck "Allow visitors to subscribe".
The Subscribe button will disappear from your page.
Bill

Glitch in Graphic Inspector for Photo Template?

When I create a slideshow using iWeb, using the "Photo" template the "reflection" option is grayed out in the graphic inspector, and the default is set to having a reflection. I really, really don't want a reflection - yet I cannot opt to change it. Why is this?
The other templates to not seem to have this problem.
Thanks!
Jane

Hi Jane
Yes we are trying to open the file, I dont know of any reason why you can't..... unless for some reason Keychain is not allowing access to the disk, but the fact that you can see it would suggest that it is.
Another option, drag Taco to your dock, if its not there already (so that you can launch it from here).
Next, find your slideshow.html file and drag it onto the Taco icon and Taco should launch and open the file.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.5) Updated - Get Started with iWeb (WillG4PB.com)

Photo Storage Question

Hi: When I take a photo with my C3 and designate it be stored on the microSD Disk is the photo also stored temporarily on the phone's internal memory?
Thanks, Chato
Solved!
Go to Solution.

Hi Farby:
Thanks for you input. The photos in question were taken 4 months ago but the phone has only been used for a couple of hours since then. What I'm looking for is secure eraesure of photos before upgrading phone!
Cheers, Chato

Photo stream questions, sharing, etc.

Shared photo stream questions
Camera Roll (CR), Photo Stream (PS)
If I create a shared PS and share it with a friend, is this temporary like the main PS (most recent 1000 images)?
For example, if I put one photo in a shared PS and then take 1000 new photos (but I don't add it to the shared PS), presumably it will disappear from my main PS, but will the original photo disappear from the shared PS, too?
I noticed that each month I have a new monthly event titled, for example, "August photo stream", etc. Are these temporary, too? If I take 1000 photos in September, will the August PS event start to lose images, or will this only occur in the main PS section?
Apple's web site says "iCloud stores new photos for 30 days, so you have plenty of time to connect your iOS device to Wi-Fi and make sure you always have your most recent shots handy." What does this mean? If I take a photo on iPhone it's permanently in CR (until I sync with iTunes on OS X and then iPhoto offers to remove them from CR), but they're also in PS, which is temporary, right? If so, as long as CR is permanent, how big an issue is the 30 day rule?
Here's where I'm (further) confused...
On iPad, my PS section (the tab on bottom) only has 30, relatively recent photos. Each photo was taken with iPhone.
However, on iPhone, my PS section has 547 images. Some of these were taken as screen shots from iPad (even though they're not on iPad's PS??) Some of the images were "Save As... " image files from OS X, some were photos imported to desktop iPhoto from a camera. Many of the images were taken years ago. On desktop iPhoto, I have over 3000 images, but the images on iPhone's PS do not appear to be the most recent 1000 images imported to iPhoto.
So why did iPad's screen shots disappear from iPads PS yet appear on iPhone's PS?
Why aren't the two iOS device's PS sections the same?
Is this confusing to everyone, or am I just dense?
Thanks!

You are most likely using the same apple id under settings>iCloud. If you just want to stop the photo sharing you can open settings>iCloud and turn off photostream. If you want to keep using photostream and still not share you need to set up an alternate apple id to use under settings>icloud

How can I get photo templates in iWeb to display on Windows Internet Explorer?

I am creating a web site, using iWeb 3 (latest version), for a friend's band. I have created a Photos page, using the My Album template. I have also created various bio pages, using the Photo template. When I tesy the pages on my virtual Windows maching, with Internet Explorer 9, I can only see the text and no photos. Anyone have a similar problem and a solution, being to continue to use the iWeb page templates?
Thanks in advance
WeetMab

virtual Windows
you can not depend virtual machine, it's an emulator and emulator is not the real thing... just like open a web page in safari and use develop --> user agent.
you have to test it out with a real pc and real ie browser.
iweb photos/albums page are loaded with javascript widgets, so turn on javascript in you pc/browser.
optimize photos/albums page will have no effects with javascript widgets.
fact check people, a lot thing won't when javascript is off... start out with navbar...

How delete photos from photo template?

I selected the Photos template to add photos to my web site. I can't get rid of the photos or the photo space markers from the template. It comes up with a grid of three boxes with photos in them. iweb directions indicate that all I need do is drag a new photo into a photo space and the old from the template will be removed. Doesn't happen. Also on my first photo page, I only want 1 photo and can't get rid of the 3 space photo marker. ideas? suggesstions? I also don't want to be locked into a 3 photo across grid on future photo pages.

You have to drag it into the photo grid, wait for it
to turn blue, and it WILL make the original ones
disappear.
You can change to two across instead of three in
Inspector. Again, you must be clicked on the photo
grid to make this change.
Thanks varkgirl, that helped. I've done that. But now can't change the size or the position of the photo. I just want one photo to fill the width of the page & be centered. I've tried clicking on the frame (?) around the blue photo frame and dragging/grabbing the edges but will only let me go so far. My photo is still postge stamp size and left justified on the page. Any other ideas?

Photo template pages

When I selected a photo template page, I got 4 slots for pictures. Does that mean I can only, actually, have 4 photos? I can't seem to grab it to duplicate it nor find a place to simply increase the pictures to 6 or 10 or whatever.
Should I just skip that template and use a blank page and perhaps drop in a photo album from iPhoto? I mean, it seems silly to think that Apple has only a page for 4 photos.

Actually you can drop in up to 99 photos into the photo template area. Or you can drop in a few at a time. The template will automatically expand as you drop more photos in. Just drag your photos over the thumbnail area and you will see the template box highlight in blue and your cursor will turn into a green "+" sign. Then let go of your photos and they will be added to the thumbnails!
And yes, you can also use iPhoto and select up to 99 photos and then click on the iWeb button and select "photo page". That will work, too!

Looking for HP Photo template print v 1.12

I know HP updated this program, but I want the templates back that were in the 1.12 version! Will somebody share, please?!

I am also looking for a previous version of HP software. it was a free download. I last downloaded it in 2009 but due to malfunctioning computers, I lost the program. it is called HP photo template print. it allows the user to print images either as a full page print or use a variety of templates to insert images. the images do not have to be previously loaded to the computer but the program will accept the images from any device. If there is anyone, anyone at all who can help it will be greatly appreciated. The file name I have for it is HP Photo Template Print. ver 120.000.011 or something very similiar. I have contacted HP and no one seems to know what program I am referring too.
PLEASE!!! help
Thanks in Advance

Photo template 3rd party hosted malbehaviour

I published to folder for 3rd party hosting. Go to the page that has been done with the photos template. On that particular page i moved the photo grid page a few hundred pixels page-downwards to give room for a large text box that i want to stand first. well it's here http://www.padmehum.de/de/cntnt2a.html
Please click on an image in the photo grid the cursor will jump to Y = 0 pixel or something like that. It jumps up all the way page-upwards.
Anyone has a patch for this (mass-replace)?
I'm also looking for an alternative open source slideshow or photo grid tool that i could do with iWeb widgets. Anything appreciated!

Isn't there another workaround. Which actually allows me to keep the photo grid i want it to be.
I thought anyone of the cracks might have a patch or instructions. I'm not exactly sure but it looks to me you have to change something in the photo grid css and js files. If i could replace that 'reset to the top' with actually keep the position you wouldn't even need to create several versions of the css and js considering that you'd had more than one photo grid (and each at a different Y position). But i'm not firm enough in html to know this right away what to look for and what's the command for keeping the position.

N86 photo storage question.

Is it possible to set up a separate folder in which to store photos, so they don't appear in the albums? For example, if I am using the phone like a flash drive, just as a means of transferring files from one location to another.

Hi Farby:
Thanks for you input. The photos in question were taken 4 months ago but the phone has only been used for a couple of hours since then. What I'm looking for is secure eraesure of photos before upgrading phone!
Cheers, Chato

Trying to make a Xmas Card in iPhoto. When card is made I hit "Buy Card", but I get "card incomplete" because it says there are empty photo templates that haven't been filled. Only they have all been filled. There are no empty ones left to fill! Now what?

Trying to make a Xmas Card in iPhoto on my Mac i5. When card is made I hit "Buy Card", but I get "card incomplete" because it says there are empty photo templates that haven't been filled. Only I have filled them all!. There are no empty ones left to fill! Now what?
Thanks for the help.

Only I have filled them all!. There are no empty ones left to fill! Now what?
Some text do look like they were final texts, that cannot be filled, but they are also place holders, for example the "Season's Greetings".Have you really clicked on each and every text, to see if they need filling in?

Photo Template Question

Similar Messages

Maybe you are looking for