Pidgin audio call error

when I use audio call in pidgin ,there are two differernt repsonse
1，one error is：
error adding stream
2，there is only "Calling" in the audio calling window.
my arch is 64 bit
pidgin is Pidgin 2.7.3 (libpurple 2.7.3)
thanks for your help !

Google wrote:
oliver wrote:I had to download the intermediate certificates and put them in /usr/share/purple/ca-certs/ before this would work. It's documented at http://squidsrants.blogspot.com/2010/11 … ocols.html
This FINALLY did it for me.
Seems to work fine for me.

Similar Messages

Pidgin gtalk audio call Error and crash

I install pidgin 2.7.1 today ,but when I test audio call under gtalk with a friend ,
get this message:
First:
Error adding stream.
then I install gstreamer0.10-good gstreamer0.10-bad
learn from [url]http://bbs.archlinux.org/viewtopic.php?pid=732137[/url]
but when I select audio call again, it crashed !:(
so I rm gstreamer0.10-good gstreamer0.10-bad
and then get this msg:
Error creating session: Could not create the valve element
thanks for your help!!!:D

Could be either way. Actually, sometimes Encore is not able to handle the mismatch in audio and video duration and that is why it causes a crash or some other error.
Try matching the duration and then build. Hope this solves your problem.
Thanks,
Ramesh.

No audio call with pidgin+openbox+gtalk

I'd like to make an audio call (gtalk) from pidgin 2.10.1-1, but option is disabled, greyed out. I've gstreamer plugins, farsight2 installed.
Any idea what I'm missing?

Hi folks - my Lumia 900 Windows Phone was purchased in Nov 2012, no problems with it until recently when the audio on the earpiece stopped working. If I switch to Speaker, I can hear everything loud & clear, but that is not convenient most of the time. Vols on 10, no bluetooth on.
Have tried turning the phone off & back on (soft reboot) which initially seemed to re-set the earpiece speaker, but now makes no difference - the earpiece audio is intermittently dead. Frustrating when you ring someone & get silence, yet a few minutes before audio was OK. Hard reset is last ditch - I dont think it will help this intermittent problem
Sounds like this might be a fairly common fault with the Lumia 900. Just bought an 820 for my wife so I hope the problem is not contagious. Time to back up the Contacts list and make sure the Zune synch is up to date i think. At least my supplier's support is on the ball regarding a warranty claim - looks like that is what the outcome will be.
B.

Cannot turn on iphone cellular calls error

When trying to activate iPhone Cellular Calls, I get the error "cannot turn on iphone cellular calls error, FaceTime and iCloud must be signed in to the same Apple ID to use iPhone cellular calls" I am signed onto the same accounts in both places and cannot figure out what is wrong. Any help would be appreciated! Thank you

If you're trying to make calls from a mac, then you should make sure to enable FaceTime calls from your AppleID (email address) on both the mac and the iPhone. Don't uncheck your phone number, either. FaceTIme should be enabled on both devices with both your phone number and your AppleID.
For some reason, this is what had to be done for me to be able to make phone calls from my mac without receiving this message on my iPhone. I know it isn't ideal because we shouldn't have to enable FaceTime calls via AppleID, especially if we won't be using it with our AppleID, but this is what worked for me. Once you enable FaceTime calling from your AppleID on both the iPhone and your mac (while also keeping the calling enabled via your phone number), then try to turn on iPhone cellular calling on your iPhone. It should work, and then you can try to make a cellular call on your mac.
Some people may think that this isn't a fix because they might think I am talking about FaceTime audio calls. But I'm not. Try this and report back if you can.

C90 only making audio calls

Hello ,
I just purchased and setup two C90s . Calling to other endpoints or inside my network between these two I only get an audio call. I have gone over everything 100 times and I just cant seem to find the issue. I have used the C series codecs for years and have not seen anything like this before. It will not push a presentation either.
Thanks

Thanks for the response !!
I have put these two all by themselves on a small network and am trying back and forth between the two with no other influence . Yes , they are acting just like a unit without multisite that is already in an active call.
They are both set to 4 meg and they are the only devices on that network. There is one caveat and I havnt mentioned it because I have done it a thousand times and it never mattered . I am not using the Cisco camera with camera control and I do have the error for no camera attached.
I have seen this tons of times in the past and it didnt matter at all. I usually hook a high end camera into the HD/SDI input for what I use these for.
These are older "Tanberg" branded codecs tho and I am wondering if it puts the units into a state where they cant make a video call ? I looked for some API command to disable such a thing if it existed and found nothing. Im dying here.

DX80 making Audio Calls Only

I have just recently acquired a DX80 to test in our environment. I was able to get it registered to CUCM 10.5 and place calls with it. The problem is though that it will only make Audio calls. I cant seem to get it to make any video calls.
All the other devices (SX20s) registered on CUCM can make video and audio calls without any issues.
I have installed the device pack.
cmterm-devicepack10.5.2.12014-1.cop.sgn
and the device
cmterm-dx80.10-2-3-33.cop.sgn
Running with:
CUCM 10.5
VCS 8.5.1
Any suggestions?

Thanks for the response !!
I have put these two all by themselves on a small network and am trying back and forth between the two with no other influence . Yes , they are acting just like a unit without multisite that is already in an active call.
They are both set to 4 meg and they are the only devices on that network. There is one caveat and I havnt mentioned it because I have done it a thousand times and it never mattered . I am not using the Cisco camera with camera control and I do have the error for no camera attached.
I have seen this tons of times in the past and it didnt matter at all. I usually hook a high end camera into the HD/SDI input for what I use these for.
These are older "Tanberg" branded codecs tho and I am wondering if it puts the units into a state where they cant make a video call ? I looked for some API command to disable such a thing if it existed and found nothing. Im dying here.

Meeting place 8.5.1 WebEx deployment and recording audio calls

Have MeetingPlace 8.5.1 application server (Web Ex deployment model -- 1 server) and we need to record our audio calls and that option displays error.
I looked over docs and configuration guidelines, and see no recording options on our config pages for users/user groups like the documentation states to enable this.
Do I need a audiorecording license, and if so, is the WebEx deployment model the correct model to work with recording? The cisco docs on this are not very clear and I haven't found a document that really lists/compares every feature available for each deployment model. The documents that mention audiorecording license talk about an Audio server or meetingplace deployment.
Thanks, Erick

I have this working now, I had to add a 1- to the access number so it was 1-XXX-XXX-XXXX on the Meeting Place web ex configuration page then redo the Webex configuratin setup.

Is there a way to switch off by default the video on FaceTime? I only ever use this app for audio/calls and hate the video being on. I especially hate that if I leave the app open to receive calls it means the camera and green light are on.

My issue is that I can't find a way to have the camera switched off when the app is open and so this means if I want the app open all day to receive calls then the camera is going to be on the whole time. Even if it didn't potentially drain the battery, or add to the CPU usage or whatever else may cause any problems whatsoever (wheel of death!), I just don't want the camera on as I don't see myself ever wanting to use the video call feature but I would use the audio/call multiple times throughout the day to make and receive calls. The camera being on when the app is open is enough to prevent me from using the app. Also ever since seeing that episode of criminal minds where if you saw the green light on above the screen then it meant the killer was watching you!
Basically I just can't believe there isn't a way to disable the camera whilst having the app running. I know when initiating an audio call the camera goes away, but I would like the camera away the whole time. To me it just would make sense that if you click the video option then the camera is on, and if you click the audio option then the camera goes off. It just seems waaaaay to basic a thought for apple to have missed... Let's face it, we're not all as pretty as the people in the apple adverts and don't want to see our ugly mugs staring back as us when we work all day at our macs!

I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

Hi,
I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
Problem Faced -
I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
Can you please let me know if any of you guys have faced a similar issue.
Please let me know if you need any information regading the configuration used.
Looking forward for your valuable comments.
Thank you.
Regards,
Joseph Chirayath.

Hi Will,
I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
Please do let me know if you need any further information.
Thank you.

Smartform Printing : Error in spool C call: Error from TemSe

Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device    ZEB10
Format           ZTT               Format
Doc. Category    SMART
Recipient
Department
Deleted On       19.01.2011
Authorization
Output Attributes
No. of Copies   1
Priority              5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested           0
Processed           0   With Problem                             0
                        With Error (Not Printed)                 0
Storage Mode Print
TemSe Attributes
Object name           SPOOL0000013836
Data type             ????????????
Character set         0 -
> Character set of dev type = 1162
Number of parts       0
Record format
Size in bytes         0
Storage location
On seeing SP01
      Spool no.              Type                 Date        Time   Status   Pages               Title
       13836      Smartforms(OTF) 11.01.2011 07:32       +          0      SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
Manas

Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K

Internal error - NUMBER_GET_NEXT call error while craeating new company address

Dear Team,
In solution manager while we going to create company address through tcode SUCOMP and during saving the record error message occur as "Internal error -NUMBER_GET_NEXT call error".
Please suggest for solution
Regards,
Ajay

Dear Mr. Rafikul,
There is no ABAP dump but in SM21 there are error message:-
"Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message E0 022
EDI: Error process code '&' is not available
&CAUSE&
A syntax error was identified while processing an inbound
<DS:GlOS.IDoc>IDoc. There is no entry with the key &v1& in 'Error
process codes'. However, this process code was determined from the
table of status values (TEDS1).
&WHAT_TO_DO&
Please check the 'Error process codes'.
IF &DEVICE&='SCREEN'
<DS:TRAN.WE40>Execute function
ENDIF
One document format shows more"
Now my one of problem solved. When i have go to SU01 and checked in address tab, its work now. Earlier its was not work.May be executed the report Z_OSSNOTE_445575 in system, its should be working. Thanks for your answer.
But till m facing in SUCOMP for creating company address.
Regards,
Ajay Asawa

U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

I have a iPad mini an my friend in pa has the iPod 5 and when we try to face time or audio call we can't hear each other what should I do ?

I have a iPad mini an my friend in pa has the iPod 5 and when we try to face time or audio call we can't hear each other what should I do ?

Make sure both parties are running IOS 7.1.1
http://support.apple.com/kb/TS5419

Ecatt script fails due "Error in OLE API method Call" error

Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha

>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN.

*ERROR IN OLE CALL - METHOD CALL ERROR...*

HI ..
When trying to Upload a file using BDC with Vista OS, we are getting the following error..
ERROR IN OLE CALL - METHOD CALL ERROR...
There is no problem with BDC as its working fine with XP & other OS.
Pls help!!

Seems that you are working with microsoft files.
Maybe you are using deprecated functions like WS_EXCEL

Pidgin audio call error

Similar Messages

Maybe you are looking for