PL/FLOW please help !

I try to install PL/FLOW to APEX . There is an error after commad @plflow.pks runs.
Warning: Package created with compilation errors.
Errors for PACKAGE PL_FLOW:
LINE/COL ERROR
1439/1 PL/SQL: Declaration ignored
1447/8 PLS-00201: identifier 'INT_TABLE_TYPE' must be declared
it shows that problem is here :
FUNCTION has_roles(
pati_id_in IN wf_participants.id%TYPE
, call_history_in IN VARCHAR2 DEFAULT '' -- to detect loops in PROXY OF, string of '(pati_id)(pati_id) etc'
RETURN int_table_type;
in BODY is a description
|| int_table_type is nested table and not index-by-table, so it is usable
|| from SQL (see table 19.2 comparing oracle collection types in the PL/SQL book).
Does anyone have a same problem? Does anyone created workflow application based on PL/FLOW in APEX? I would like to share experience with PL/FLOW.
Thanks for help.
http://plflow.sourceforge.net/

pmubcz,
You'll have to create this type apparently it was left out of the code...
create or replace type int_table_type as table of number(8)
grant execute on int_table_type to public
I have used PLFLOW before with very good success, but never with Apex, although it should be no problem.
Keep Smiling,
Bob R

Similar Messages

Please help me P M Module configuration document.

Hi friends,
I am planing to learn SAP PM Module, I want know process wise flow, please help me P M Module configuration document.
Regards,
Murali.
help.sap.com

Lynn
Had me stumped for a while too ...
On the screen that presents all your "Blank" documents, simply touch the word "Blank" under the preview (not the actual preview) and you'll get a dialogue to name your document.
Simon

Please Help, Album Artworks

When I changed my ablum artworks with my songs in my 3rd generation iPod nano... the new pictures would show up while the songs were played on iTunes. However, after disconnecting my iPod from my computer, some album artworks would show up as an entirely black rectangle on my iPod. (Both when I played the songs and when I saw them while going through the "cover flow") Please help! Thanks

took hours?
i have a 64gb 4S with 7699 mp3's (50GB) and mainly embedded album art and that took about 30-40 mins to sync so you have some other major issues apart from album art.
i have had a number of users with this issue before and it usualy starts as a result of an abortive sync usually the device gets unplugged whilst its syncing corrupting the database on the device.
the artwork is either embedded into the mp3 or held in a database in iTunes so if you can see it in iTunes but it does not show on the device I would restore and 'setup as a new phone' then add in my apps and music again and re-enter my e-mail settings etc.
make sure any data is off first.
this will work unless the itunes database is corrupt.

In Pages, the column in the table won't flow onto the second page. The text is hidden. Please help!

In Pages, the column in the table won't flow onto the second page. The text is hidden. Please help!

Thank you for your reply,
When I click 'view' , I can "show inspector". From the table tab, I can pull up the "Format". [See below]. I don't see the "Arrange" or "Object Placement Move with Text"
Right now I have the Wrap Text On. When I take it off, It messes up my rows [see second image].
All I want is for my column to flow onto the second page.
Your assistance is genuinely appreciated.
Thank you again.

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck

4/30/2011. Can you please help me. I have an iBook G4 with Leopard OS 10.5. Yet how do I correct Website movies going flow-pause-flow-pause-flow etc? Chuck Y Chicago

4/30/2011. Can you please help me. I have an iBook G4 with Leopard OS 10.5 and latest Safari updates and maximum Ram (512 or 640 kb). Yet how do I correct Website movies going flow-pause-flow-pause-flow etc? The problem is with the iBook, not the website and movies. Thank you. Chuck Y Chicago

5/2/2011. Thank you all for your replies. My iBook is in the third group of the website you referred me to. I bought it July 5, 2004 at CDW near here. It had OS 10.3.6. 1GB (GHz. Power PC G4.), opaque white case. Its screen is 14.1 inches. Soon after I bought it I had its 128 RAM raised to 640 RAM, to work with maximum capability for converting VCR recorded videos/movie into digital files and burning these onto DVDs. Later I had an Airport card installed. As time passed I opened the apple icon (upper left hand corner of the screen), and Softwate Update, and eventually had this install OS 10.5.8. At first It could only be updated to OS 10.4. But then after several years I bought Leopard OS 10.5.8 from the Apple store near here. By then Leopard had been adapted to work on iBook G4. Its specifications are described with the same Apple icon and About this Mac.
It will play You Tube and similar websites OK. But videos/movies from websites such as hulu.com, ABC, CBS and so on, it displays a pattern of flow-pause-flow-pause-flow-pause-flow and so on.
I thought first to see if this forum would have any suggestions.
I think probably that its CPU has reached its limit; later Mac laptops have greater CPUs.
Many thanks to you all. C Yopst Chicago

Please help my mac is so slow coming up and going to different places. the flower keeps coming up all the time.

Please help my mac is so slow coming up and going to different places. the flower keeps coming up all the time?????

I'm having this problem but only online. I've confirmed that it is the computer (2007 MacBook), and it only happens when I'm using wi-fi connection. My other MacBook (2010) is connecting with wi-fi fine, and when I plug this MacBook into the ethernet connection it is also doing fine. I've re-started, check the memory, deleted cookies, histories, gone as far as uninstalling and re-installing browswers. Used the System Preferences network diagnostics and got an "all good". Ideas appreciated.

Please help me on Following sytax error in Work flows

Hi SAP CRM Gurus,
I am getting following Syntax error while generating object type ERMSSUPRT2.
Points will be rewarded.
Thanks in advance.
Thanks,
Rony.

Ji Jhonney,
I am finding Syntax error in Transaction /nswo1. Syntax error is:
program %_JJ_TESTFRAME_OBJTYPE
"CRMS_ERMS_STRING" must be flat structure. you cannot use internal
tables, strings,references or structures as compnents.
Please help me.
Thanks in advance
Thanks,
Rony.

STEVE JOBS!! PLEASE HELP!! LIST OF WHAT NEEDS TO BE FIXED IN FIRST UPDATE!!

DEAR STEVE AND APPLE DEVELOPMENT TEAM,
I have been a loyal Mac customer for almost 20 years. This is the first time I have been extremely unhappy. My thoughts are listed below......
In giddy excitement, I rushed home from work on Tuesday September 12, 2006 to downloaded itunes 7 and play with the new added features, but to my dismay the bad upgrade experience began which I go into more detail below.
I just wanted to mention that I bought some new music videos and they won't play. Contacted Apple and they said that they would not give me a refund or itunes store credit. Is this good customer service Apple?? This past week since installing itunes 7.0 It's been a week of MAC DRAMA! If it's the company's fault that I'm having problems because of a bad software upgrade, should I be punished for being a good customer?? Not good business Apple. Wise up to your customers. Without us, where would you be???
BELOW IS MY PERSONAL DREAM LIST OF ITUNES 7.0 FIXES........
1) NOT AN EASY UPGRADE. This was not an easy upgrade. itunes 7.0 removed all of my music videos from my ipod because the preferences are now in the summary and at the bottom of the music tab is a check box for including your music videos. Should this not be on by default? Because it was not, all my music videos were erased so I had to put them all back on my ipod which is very time consuming.
2) INSTALLING QUICKTIME. Apple don't you think that you should have told your customers to install the latest NEW version of Quicktime BEFORE installing itunes 7.0?
3) MUSIC VIDEO LIBRARY. The itunes library is now separated into different categories. Good idea if you had thought it through. Apple, if you have three video kind settings in the get info box (music video, movie, TV show) would it not be a good idea to reflect this in the new itunes library? PLEASE ADD A MUSIC VIDEO LIBRARY. I understand that music videos are music, but because they are music videos and not audio, it would just make it easier to be able to access them separately from the rest of your mp3's.
4) COVER FLOW. Again great idea for the eye candy if it worked correctly. Every-time I try to use the coverflow view and add movie art or album art half the time itunes crashes. I have to force quit, then restart itunes. Never crashed in itunes 6.0. Please fix!!
5) GET ALBUM ART. Get album art is a great idea if it would work correctly. I click on a song that needs art, use the contextual menu, go to get album art, yeah!!!!! oh... nothing happened? Still using third party software fetch art instead.
6) CATEGORIES. When you are in a playlist or library and would search for a file — at the top left of the itunes 6.0 window it would give you automatic categories to refine and breakdown your search even more. For example, Music, Music Video, Movie, Podcasts. Why did you take this out in itunes 7.0? It was very helpful in refining your search!! PLEASE PUT BACK!!
7) MUSIC VIDEOS. Even though I would have my music videos set to skip when song shuffle is selected, I could go into the music video folder of the ipod and just play my music videos and they would shuffle within their own folder. Now in itunes 7.0 they will not shuffle. So of course to get around this.... again I had to do more work than I would like to have, by creating just a music playlist with all my songs so I can have them shuffle separate from everything else on my ipod. Then I had to go into my music videos and select all of them to now not skip when shuffle is selected. Apple why are you making this harder on us?? Why are we having to backtrack and regress to do what itunes 6.0 did for us automatically??!!
8) FRONT ROW WILL NOW NOT RECOGNIZE ANY OF MY TV SHOWS. I go to front row, TV shows, nothing is listed. Just a blank bar. Only way around this is to get info then change video kind from TV show to movie. If video kind is a TV show, then Front Row needs to reflect that. PLEASE FIX!!!
9) QUICKTIME CRASHES ABOUT HALF THE TIME I USE IT NOW. No problems until last upgrade. I open a video file, click play, spinning color wheel of death! Force quit restart. Did Microsoft help you with this last upgrade???
10) ITUNES 7.0 IS VERY SLUGGISH! Not as responsive as itunes 6.0. Apple what happened with taking your time. I feel that itunes 7.0 was not thought through and rushed! IF IT AIN'T BROKE, THEN DON'T FIX IT!!! Remember Coke and New Coke?
I have read numerous more complaints from customers regarding their own personal experiences with this VERY BAD UPGRADE. Apple, I really hope you are reading a lot of these user complaints and really taking this seriously. This mistake may cost you a lot of loyal MAC fans.
Steve, I hope your reading this. Please help us!!
Sincerely,
Jason Bowles

You're wasting your time writing letters to Apple here as these are user to user forums.
Use the iTunes feedback form to request improvements and fixes.
It looks like you used the iTunes Store support form to ask Apple for a refund or store credit but if you think about it, anyone could ask for a refund saying their files don't work and Apple wouldn't know if they were telling the truth. You can ask for replacement copies of your purchases just like I did when I had a corrupted file one. If there really is a problem I suspect an iTunes/QuickTime update will render your videos playable again.
Most people like me are not experiencing the problems you describe and I can honestly say all my videos and music are playing just fine.
I updated to QuickTime 7.1.3 after I updated and played with iTunes 7 so that didn't make any difference. I also repaired permissions before and after the updates and permissions were changed so that may have been important.
I don't know about the erasing of videos from the iPod as I don't have a video capable one.
I totaly agree about the need for a Music Video library to go with the other libraries and I don't want my music videos in the main music library. This is preferable to using a Music Videos Smart Playlist. I currently find my music videos/behind the scenes interviews etc in the Movies library because their Video Kind is set to "Movies" and the option to change that is greyed out which is a pain. Temporarily I added a grouping tag of "Music Videos" to those videos and edited the Music Videos Smart Playlist to look for that Grouping tag, so at least I can find old and new Music Videos in one place.
I've had no issues with Cover Flow whatsoever and despite extensive use of iT7 have had no crashes so can't comment on that.
The Get Album Art feature only works if your track information is correct and the songs are available in the iTunes Store because that's where the artwork comes from. It also won't work if you already have artwork in place from another source so you'd have to remove that to make way for the iTunes artwork if you're wanting higher quality artwork than you could elsewhere.
The thinking behind the categories change is that you have separate libraries so you can go straight to the appropriate one for movies, podcasts etc. The seach box features a drop-down menu to narrow your search down to All, Album, Artist, Composer or Song so whichever library or playlist you go into you can narrow a search with that.
I am not finding iTunes 7 to be sluggish at all and having tested its cpu usage I know that's using about 1.5% when idle to 7-10% when playing a song.
Clearly something is wrong with your installation so assuming you've done the usual practices of repairing permissions and even a reboot for good measure then maybe a reinstall of iT7 and QT is in order.
I'm sure it's only a matter of time before you or Apple crack it and all will be well again.

Dreamweaver tables not displaying correctly in internet explorer browser, please help!!!!

Could someone please help me with this issue i've been having for almost a year now and can't find any information on getting this fixed, for some reason the features specs and required tables rows are not displaying correctly, the image is out of aligned when viewing the results using the internet explorer browser only, the firefox browser works just as needed but when i try to view the same code in IE the tables are not aligned properly and the text is not margined correctly either, i tried playing around with the css style that i have and no results. Please help me fix this issue so that my page would display in internet explorer just like under Firefox. Below are the pictures of the problem i'm having.
This picture shows how i want it displayed on the internet explorer and firefox browser:
Here is results in firefox browser:
Here is results in internet explorer browser:
As you can see the tables are all messed up, text is not centered properly even if i coded it right.
Here is the coding for this page:
PLEASE HELP ME OUT WITH THIS PROBLEM, I NEED TO FIGURE OUT HOW TO MAKE INTERNET EXPLORER TO DISPLAY THE INFORMATION CORRECTLY JUST LIKE FIREFOX?
<style type="text/css">

</style>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR<td></td>
</tr>
<tr>
<td height="31" align="center" valign="middle" class="number">HPI Item #10620<td width="10"></td>
</tr>
</table>
<table width="925" height="326" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onClick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onClick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onClick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onClick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onClick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onClick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onClick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onClick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" height="124" border="0">
<tr>
<td height="320" class="description"><p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center" class="features">Features:</td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td height="526" class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
<td> </td>
<td class="featurebackground">
<ul>
<li class="featurebackground">Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li class="featurebackground">Transmitter Batteries: 8x AA</li>
<li class="featurebackground">Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
</tr>
</table>
<table width="928" height="621" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/ePaymentMethod.jpg" class="policy"><p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p>
<p> </p></td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="220" background="http://www.ehobbyplanet.com/eBay/Layout/eNormalShipping.jpg" class="policy"><p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td height="104" background="http://www.ehobbyplanet.com/eBay/Layout/eInsurance.jpg" class="policy">We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/eReturns.jpg" class="policy">We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</td>
</tr>
</table>
</body>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
Here is my contact information:
Paul
[email protected]

Try this without the border images and it will work in all browsers with increased text size. That's assuming eBay supports embedded CSS styles (which I'm not convinced they do). Inline styles are safer IMHO.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
h2 {font-size:1.7em; color:#000; margin-top:0em; margin-bottom: 2px;}
ul,li {
font-size:14px;
list-style:disc;
line-height:1.5;
font-family: "Times New Roman", Times, serif;
.description {
font-family: "Times New Roman";
font-size: 16px;
line-height: 1.2;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
border: 4px solid red;
padding: 0 20px 20px 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
line-height: 3em;
.featurebackground {
padding-right: 10px;
border: 4px solid red;
width: 200px;
vertical-align: top;
padding-top: 1em;
.policy {
border: 4px solid red;
margin-top: -2em;
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #000000;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
border: 4px solid red;
.number {
.policy {
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding: 0 20px 20px 20px;
</style>
</head>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR</td><td></td>
</tr>
<tr>
<td align="center" valign="middle" class="number">HPI Item #10620</td><td width="10"></td>
</tr>
</table>
<table width="925" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onclick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onclick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onclick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onclick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onclick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onclick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onclick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onclick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td class="description"><h2>Description</h2>
<p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center"><span class="features">Features:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
</td>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
</td>
<td> </td>
<td class="featurebackground">
<ul>
<li>Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li>Transmitter Batteries: 8x AA</li>
<li>Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
</td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Payment Method </h2>
<p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Shipping & Handling </h2>
<p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Insurance</h2>
<p>We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Returns</h2>
<p>We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</p></td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
That's the best solution I can offer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Error while installing APEX3.0.1 -- Please Help

Hi All,
I am trying to install APEX3.0.1(apex_3.0.1.zip) on Windows Sever2003 SP2 but am not successful.
I have Oracle Applications 11.5.10.2 as Database.
Anyone Please Help Me....
The Steps I followed:
conn sys/manager@prod as sysdba
grant GRANT ANY PRIVILEGE to public;
Confirmed that the PL/SQL gateway is 10.1.2.0.6
SQL> @D:\oracle\apex\owa\owainst.sql
Procedures Got Executed
SQL> select owa_util.get_version from dual;
GET_VERSION
10.1.2.0.6
-- Then i executed this script
SQL> @D:/oracle/proddb/9.2.0/ctx/admin/defaults/drdefus.sql
Creating lexer preference...
PL/SQL procedure successfully completed.
Creating wordlist preference...
PL/SQL procedure successfully completed.
Creating stoplist...
PL/SQL procedure successfully completed.
Creating default policy...
PL/SQL procedure successfully completed.
Created Table Space
create tablespace APEX datafile 'D:/oracle/proddata/apex9.dbf' size 500M;
-- Then i executed this script
@D:\oracle\apex\apexins.sql raman apex apex temp /i/ none
After Execution I am getting these errors…
grant execute on SYS.dbms_lock to FLOWS_030000
ERROR at line 1:
ORA-04021: timeout occurred while waiting to lock object SYS.DBMS_LOCK
==========
Warning: Package Body created with compilation errors.
No errors.
begin
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04063: package body "FLOWS_030000.WWV_FLOW_UTILITIES" has errors
ORA-06508: PL/SQL: could not find program unit being called
ORA-06512: at line 2
SP2-0310: unable to open file "core/coreins.sql"
...create flow auditing
==========
grant execute on wwv_flow_epg_include_modules to anonymous
ERROR at line 1:
ORA-01917: user or role 'ANONYMOUS' does not exist
ldap.plb
custom_auth_ldap.plb
...wwv_flow_ldap
==========
apxsqler.sql
...design time flows
APPLICATION 4411 - APEX - System Messages
Set Credentials...
Check Compatibility...
WWV_FLOW_API.FLOWS_API_LAST_EXTENDED20070525
WWV_FLOW_API.CURRENT_FLOWS_VERSION20070525
WWV_FLOW_API.IMPORT_COMPATIBLE_WITH_VERSION 20070108
WWV_FLOW_API.COMPATIBLE
Set Application ID...
begin
ERROR at line 1:
ORA-20001: WWV_FLOW_API.SGID_NOT_SET
ORA-06512: at "FLOWS_030000.WWV_FLOW_API", line 46
ORA-06512: at "FLOWS_030000.WWV_FLOW_API", line 238
ORA-06512: at line 4
After That
(copy Images Folder All from)
D:/oracle/apex/images (images folder to) D:\oracle\devora\iAS/Apache/Apache
Then
Edited the D:\oracle\devora\iAS\Apache\modplsql\cfg\wdbsrv.app file and added the following
[DAD_apex]
connect_string = prod
password = raman
username = apex_public_user
default_page = apex
document_table = wwv_flow_file_objects$
document_path = docs
document_proc = wwv_flow_file_mgr.process_download
reuse = Yes
enablesso = No
stateful = STATELESS_RESET
nls_lang = American_America.AL32UTF8
Then
Edited the D:\oracle\devora\iAS\Apache\Apache\conf\httpd.conf file and added the alias
Alias /i/ "d:\oracle\devora\iAS\Apache\Apache\images/"
After Completing the Installation Steps when i Try to run the url in browser….
http://computername.com:8000/pls/apex
The home page is not opening….
Can anyone Please Tell me where I am going wrong
Regards.

anonymous,
I have Oracle Applications 11.5.10.2 as Database.
That is not a database server version. What version of the database server are you using?
grant GRANT ANY PRIVILEGE to public;
What on Earth are you doing?
@D:\oracle\apex\apexins.sql raman apex apex temp /i/ none
You're supposed to set the working directory to apex before you start SQL*Plus and then the command line would start with @apexins.
ORA-04021: timeout occurred while waiting to lock object SYS.DBMS_LOCK
After this all is futile. I'd say start over, maybe restart the db and try again starting in the correct directory/folder.
Scott

Please help......ABAP Runtime Errors DYNPRO_FIELD_CONVERSION

Hi everyone,
I don't know what's wrong with my code. It says the error in the subject line and it only applies to selected records.
A conversion error occurred.
What happened?
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
What can you do?
Please make a note of the actions and input which caused the error.
Please make a note of the actions and input which caused the error.
To resolve the problem, contact your
SAP system administrator.
Choose "Print" for a hard coopy of the termination message. You can
display and adminster short dump messages using Transaction ST22.
Error analysis
The program flow was interrupted and could not be resumed.
Program "ZADC_PGSPOSTING" tried to display fields on screen 1000. However, an
error occurred while this data was being converted.
How to correct the error
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. Attemting to display
Screen name.............. "ZADC_PGSPOSTING"
              Screen number............ 1000
              Screen field............. "JTAB-GSAMT"
              Error text............... "FX020: Data lost."
Further data:
I don't know why it prompts this error, when in fact I usually pass the "JTAB-GSAMT" field to a variable. Please help me with my problem. I'm having a hard time deciphering it when in fact my program is easy to understand. I must have overlooked something. Thanks so much in advance.
Regards,
Anna

PROCESS BEFORE OUTPUT.
MODULE STATUS_1000.
MODULE get_name.
MODULE get_psgs.
LOOP AT JTAB WITH CONTROL CTRLPSGS CURSOR CTRLPSGS-TOP_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT JTAB.
    MODULE SET_LINE_COUNT.
ENDLOOP.
MODULE EXIT01 AT EXIT-COMMAND.
MODULE USER_COMMAND_1000.
*&      Module GET_NAME OUTPUT
      text
MODULE GET_NAME OUTPUT.
siptot = 0.
data: kostl like pa0001-kostl, H_EMPNO(8) TYPE C.
IF zemp ne itab-pernr.
     move: itab-pernr to zemp.
     move: zemp to itab-pernr.
ELSEIF zemp EQ itab-pernr.
     move: itab-pernr to zemp.
     clear: itab.
     refresh: jtab.
     move: zemp to itab-pernr.
ENDIF.
     clear: kostl.
     SELECT SINGLE * FROM pa0002 WHERE pernr = itab-pernr
                       AND endda = '99991231'.
      IF sy-subrc = 0.
        CONCATENATE: pa0002-nachn ',' INTO itab-name.
        CONCATENATE: itab-name pa0002-vorna INTO itab-name
                     SEPARATED BY SPACE.
      ENDIF.
      SELECT kostl into kostl FROM pa0001 WHERE pernr = itab-pernr
                       AND endda = '99991231'.
      ENDSELECT.
      SELECT ltext into itab-ltext FROM cskt WHERE kostl = kostl
                       AND datbi = '99991231' and spras eq 'EN'.
      ENDSELECT.
      WRITE ITAB-PERNR TO EMPNO.
      shift empno left deleting leading '0'.
SELECT SINGLE * FROM zamc_mstr WHERE pernr = itab-pernr.
IF sy-subrc = 0.
    SELECT sum( diff_sip ) INTO itab-siptot FROM zamc_deduction
        WHERE amc_no = zamc_mstr-amc_no.
    siptot = itab-siptot.
ENDIF.
IF zemp <> '00000000'.
    APPEND itab.
ENDIF.
CLEAR itab.
ENDMODULE.                 " GET_NAME OUTPUT
*&      Module GET_PSGS OUTPUT
      text
MODULE GET_PSGS OUTPUT.
pstot = 0.
gstot = 0.
ectot = 0.
diff = 0.
REFRESH jtab.
SELECT * FROM zppsgsec WHERE pernr = zemp.
    MOVE-CORRESPONDING zppsgsec TO jtab.
    COLLECT jtab.
ENDSELECT.
CLEAR jtab.
SORT jtab BY datum.
LOOP AT jtab.
    pstot = pstot + jtab-psamt.
    gstot = gstot + jtab-gsamt.
    ectot = ectot + jtab-ecamt.
    AT LAST.
      diff = gstot - siptot.
    ENDAT.
ENDLOOP.
By the way, I'm using table viewer to display my results. Thanks.
Regards,
Anna

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

Please help me about Workflow

sir/mam,i am new for workflow,will any one give me guidence for how i will start with workflow ..please help me about this topic....?

Somnath,
Your question is very vague. What do you mean by new to Workflow?
Workflow can be defined as
A workflow is a reliably repeatable pattern of activity enabled by a systematic organization of resources, defined roles and mass, energy and information flows, into a work process that can be documented and learned. Workflows are always designed to achieve processing intents of some sort, such as physical transformation, service provision, or information processing.
Workflows are closely related to other concepts used to describe organizational structure, such as silos, functions, teams, projects, policies and hierarchies. Workflows may be viewed as one primitive building block of organizations. The relationships among these concepts are described later in this entry.
Read more on the Web ..http://en.wikipedia.org/wiki/Workflow
Suda

Iphone screen not working correctly Please Help!!!!

Hi all, i just returned my broken iphone for a replacement. Everything worked fine until i tested cover-flow. At first everything was fuzzy. I reset my phone and then instead of everything being fuzzy, only the color black was. I really don't want to take it back again for a third iphone. Please Help!!!!!!!!!!!!!!!!!!

Allan Sampson wrote:
Removing and re-inserting the SIM card is not a standard troubleshooting step for any and all iPhone problems and not even for a connection problem.
Well removing the SIM and reinserting it has certainly proved useful for other phones, so I don't see why it shouldn't help as a last resort for an iPhone, especially when the nearest store is a hundred miles away. The Apple Tech guys often suggest it, as well, though admittedly I have never known it to help.
But we are getting off-topic and should probably move this discussion to another thread if you want to pursue it.

PL/FLOW please help !

Similar Messages

Maybe you are looking for