Placed files don't update when changed

For some reason when I place PSD files into Illustrator, they no longer update when changed.
I've tried setting preferences to both 'Ask When Modified' and 'Automatically'...
It used to work OK, just in the past month or so it's stopped.
Also I notice that when I place a PSD file it is asking me if I want to flatten layers, which it didn't used to, as far as I remember.

Right you iz.
You can always use the Place command to replace an embedded file with a linked one.
If you've got Shift or Shift Lock held down, files will embed when placed or dragged in from the finder, otherwise they'll be linked.

Similar Messages

TS4083 My folders that message rules divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder for it to update. Is there a way around this? The folders update on my mac fine when i check mail

My folders that my message rules on iCloud divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder individually for it to update. A real pain as I have about 30 folders. Is there a way around this ? The folders update on my mac fine when i check mail without having to select each one of them. Can the iPad and iPhone do the same thing?

My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years). I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely.
Is this what I have to do?
Thanks for your help!

Discount is being updated when changing unit price in SO after upgrade

Hi there,
Customer recently upgraded to version 8.8 from 2005.
They encountered a few transactions where discount is automatically being updated when changing unit price in SO.
Customer created SO by duplicating existing SO. Then change the Unit Price in the new SO.
For one item, the price after discount does not get updated correctly. Instead, system seems to have automatically created the discount.
So far, I can't reproduce this issue yet.
Is this a bug? Please suggest.
Thanks,
Yadana

Thanks for the replies.
I have checked and there is no discount setup for the Price List or BP.
The Price List has been set to the correct one as well.
Please advise.
Thanks,
Yadana

Text not updated when changing the ResourceBundle

this is an abstraction of what i have on my code:
controller
public class controller extends VBox{
     @FXML protected Label ex2;
     public CtrlMainMenu() throws Exception{
          FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("/view/View.fxml"));
          fxmlLoader.setController(this);
          fxmlLoader.setRoot(this);
          fxmlLoader.setResources(CtrlLanguage.resource);
          fxmlLoader.load();
     @Override public void initialize(URL arg0, ResourceBundle arg1) {
          ex2.setText(arg1.getString("ex2"));
}View
<fx:root type="VBox" xmlns:fx="http://javafx.com/fxml">
     <children>
          <Label text="%ex1"/>
          <Label fx:id="ex2"/>
     <children>
</fx:root>Language controller
public class CtrlLanguage{
     private static String PATH =
          new File(
               CtrlImageLoader.class.getProtectionDomain().getCodeSource().getLocation().getPath()
          ).getParentFile().getPath() + "/language/";
     public static ResourceBundle resource;
     public static void setLanguage(String file) throws Exception{
          try {
               if(new File(PATH + file).exists())
                    resource = new PropertyResourceBundle(new FileInputStream(PATH + file));
               else
                    resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/"+file));
          } catch (Exception e) {
               resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/EN"));
     public static String get(String key){
          try {
               return resource.getString(key);
          } catch (Exception e) {
               return key;
}problem comes when I try to change the language without changing the current root
the elements of the view are not updated when the bundle is changed (CtrlLanguage.setLanguage("file");) until the root is changed/loaded again
is there any way so i can make the content change without having to reload again the root?

A method which returns an instance of the following class:
* A localizable read only property for internationalization of string properties.
* @author Christian Schudt
public final class LocalizableStringProperty extends ReadOnlyStringProperty {
    private String resourceKey;
    private StringProperty text;
    private String baseName;
    private ClassLoader classLoader;
    // Keep the listener as hard reference in the class, so that it won't get GCed, until this class has no references any more.
    private ChangeListener<Locale> changeListener;
    public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey) {
        this(localeManager, baseName, resourceKey, null);
    public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey, ClassLoader classLoader) {
        changeListener = new ChangeListener<Locale>() {
            @Override
            public void changed(ObservableValue<? extends Locale> observableValue, Locale locale, Locale locale1) {
                localeChanged(locale1);
        localeManager.localeProperty().addListener(new WeakChangeListener<Locale>(changeListener));
        this.baseName = baseName;
        this.classLoader = classLoader;
        this.resourceKey = resourceKey;
        text = new SimpleStringProperty();
        localeChanged(localeManager.getLocale());
    private void localeChanged(Locale locale) {
        ResourceBundle resourceBundle;
        Locale.setDefault(locale);
        if (classLoader == null) {
            resourceBundle = ResourceBundle.getBundle(baseName, locale);
        } else {
            resourceBundle = ResourceBundle.getBundle(baseName, locale, classLoader);
        text.set(resourceBundle.getString(resourceKey));
    @Override
    public String get() {
        return text.get();
    @Override
    public Object getBean() {
        return text.getBean();
    @Override
    public String getName() {
        return text.getName();
    @Override
    public void addListener(ChangeListener<? super String> changeListener) {
        text.addListener(changeListener);
    @Override
    public void removeListener(ChangeListener<? super String> changeListener) {
        text.removeListener(changeListener);
    @Override
    public void addListener(InvalidationListener invalidationListener) {
        text.addListener(invalidationListener);
    @Override
    public void removeListener(InvalidationListener invalidationListener) {
        text.removeListener(invalidationListener);
}

Files Don't Close when Project is Closed

Hi,
When I close an open project in the IDE, not all the files get closed. Some of them remain open in the JSC IDE, even though the project has been closed.
Would appreciate if the JSC team can acknowledge and fix the issue.
Regards
Haroon

Hi HaroonA,
In order to file a bug, I need a reproducible case. Is this consistently happening to you? How many projects are you working with when this happens? What files don't close (JSP/Java/Navigation.xml/etc.,)? If you can give me a scenario where this fails, I'll escalate the issue.
Thanks!
Sandeep
--Creator Team

When using library artworks created in Illustrator in Photoshop the 'placed' versions don't update in Photoshop even when they update in the library

I'm using a Mac and working in Illustrator and Photoshop. Here's my problem:
I would like to be able to add button designs created in Illustrator to my libraries for access in Photoshop. Pretty straightforward - just add the button to the library and then it appears in my library in Photoshop to be dragged and dropped into the file. I would assume that once you drop an item from the library into the page in Photoshop it would remain linked to the library instance but it doesn't seem to which is frustrating. So if I make changes to the original button in Illustrator Adobe then updates the library, but not all the placed instances on the Photoshop page/file. Am I missing something? If not that it is something that should be added.
Any help would be greatly appreciated.

Well, I think I found a workaround, although its ugly and not condusive to a nice workflow :-/
The "Inside Aperture" web page had a blog post describing what I said above, about using Aperture previews as referenced originals in iPhoto: http://www.oreillynet.com/digitalmedia/blog/2007/08/referencedaperture_previewsi.html
And in the comments below, I found this:
+"This works great indeed. I noticed something annoying using this method though.+
+If you edit a picture in Aperture and then open iPhoto which has already the referenced Aperture picture, the iPhoto thumbnail will not update itself automatically...+
+The easiest way to check this is to do a major adjustment in Aperture (i.e. From Color to B&W) and see that the thumbnail has not updated in iPhoto. So far I found two ways of fixing this but it is not really efficient...+
+1 - Rebuild the iPhoto library (long & painful depending on its size)+
+2 - Do an adjustment directly in iPhoto, apply it then revert to the original.+
+With the second option, the thumbnail gets regenerated."+
The bad part of this is then everytime you make an adjustment in an Aperture version and updagte the preview, you now have to go into iPhoto, find that photo, and make a change to it, revert to iPhoto original, (which is now the changed Aperture referenced preview), and the thumbnail gets regenerated. Ugly, and not very automatable .
I am going to try and start an email thread w/ the author of that blog post ot see whether he's found anything eise out.

CS5.5 (PS 5.1) Rulers don't update when zoom changes.

When the current image (docked or floating) is zoomed to a different percentage, the rulers don't change to the new setting.
If the image is in a floating window, dragging one edge will refresh the rulers. If the image is docked on the tab bar, the quickest way to force a refresh I've found so far is to drag the ruler origin to an arbitrary location, and then double-click the origin (in the rulers) to snap it back to the image's origin.
This problem could cause quite a lot of trouble for anyone building pixel-accurate images.
If this is not happening for others using Photoshop 12.1 x64 on Win7, I'd like to hear about it, because it could be related to video cards or other variables.
Allen

Animated zoom is when, on a single click and release, the image changes size smoothly from the original to the new zoom level - i.e., it appears to grow in size. Non-animated zoom just jumps immediately to the new zoom level. It is this jumping behavior we're seeking here.
I have never seen a case where Animated Zoom is disabled and you can still see the smooth size change, which is apparently what you're describing. You did close and reopen Photoshop after changing this value, right?
-Noel

Find and replace in files does not refresh when changes are made

Using RH10, I search for a term with the Find and Replace Options pod. I use the Find Results list as a reference only, and open each file from the Topic List. I do this instead of opening the topics from the Find Results tab because I want to see the WYSIWYG changes. Anyway, I make my edits and delete the search term from each topic. Then, to make sure I have done all the work, I run the search again. I expect to see no or at least fewer matches than before, but I still get some or all of the same results as before, even though I double-check the Design and HTML views of the topics and even check the source of a topic separately in Notepad, all indicating that the search term is gone from the topic.
There is some ridiculous lingering or echo going on. I make sure to select Look in: <Current Project>, and the paths of all the Find Results files are fine. How do you refresh the search so that this echo doesn't occur?
Also, I close the Find and Replace Options pod, reopen it and start the search again, and the same results are there.
Message was edited by: DMilkes

Hi there
To avoid the message about the file being modified, close all topics in the editor before commencing with any find and replace operations. The message is produced because you have the aforementioned topics open in the editor.
As you mention "Find and replace in files", I'm guessing you are referring to version 8. I just opened version 8 and performed a find and replace to confirm. There is a button allowing you to clear all.
On the clicking and dragging to create a link, it's never worked that way. You simply cannot drag from the Topic List pod to do it. But you can from the Project Manager pod. Perhaps you should consider submitting a Wish Form to ask for the ability to click and drag from the Topic List pod to create links.
As far as rearranging your topics into different folders, as long as you do it from inside RoboHelp you shouldn't be destroying any links. RoboHelp will update references for you as you move things around. The only issue is if you are automatically creating your TOC structure based on the project structure. But usually that's a one time shot. From there forward you just manage things using the TOC editor.
Hopefully this helps... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Desktop files don't update themselves...

I keep my mail running in the backround all the time, but when I want to attach a file that I have just created (say a pdf) the file doesn't show up unless I quit the Mail program and relaunch it. It seems to reset the desktop files so I can choose the file. Is there any way of resetting something in the program so I don't have quit and relaunch to update the desktop files?

Hi Sherry! and Welcome To Discussions!
Without quitting the program, try just clicking on an open area of the Desktop, and see if the files then appear.
Good Luck!
ali b

"texts on html file" are not updated "when edited on server"

Hi All,
QUESTION
What are the solutions, for having editable text/content on .html published files, so clients can edit through their server control panel
Scenario:
Client wants to update the "text" by editing the .html files on a server.
I published the website as static html so the text can be included in .html file, but edits made on server's control panel, doesnt appear in live website.
I also noticed that the texts located in edgeActions.js are editable through server, i am not very interested to define all my text content as the dynamic
code because then I must worry about empty .html files and SEO questions.

Here is what I ve found in regard to my own question...
For a Client, to be able to change the text on server (Ex: phone numbers in a contact page), they should access and modify the text in the edge.js or sometimes edgeaction.js page. Changing the text on .html page will create no result. I assume, this is because, the .html page is exported ONCE and only at the point of Publishing a project, to satisfy the SEO needs or whatever. Think of the text on .html page as a Sticker to fool the rest of the world, changing it will not change anything on webste and. Also if you change the text in .js, the change will not be relfected on .html file.

Lighroom 5.4 Develop View does not update when changing sliders

Just updated to Lightroom 5.4 (using Adobe CC) on Win8. After going to "develop view" on any photo and changing the exposure or any other slider does not update the main view of the photo. It does however update the thumbnail in the film strip and the second monitor window correctly. I've tried everything I can think of:
(1) downgrading to LR 5.3 (which used to work)
(2) forcing 1:1 and standard preview regeneration
(3) uninstalling the re-installing Lightroom (both 5.3 and 5.4)
(4) Optimizing catalogue
(5) Removing the Adobe AppData folder
(6) Creating a brand new catalogue with zero photos, importing a single photo and trying to change exposure/contrast on that
None of these result in the develop view of the picture changing when I change the sliders.
Do you guys have any experience with this?

The chances of me suspecting monitor color profile causing bugs in LR was very slim. =)
So were mine, especially when only the view itself doesn't work, but all other stuff works fine. Well, I probably have really not good colour profile, luckly you can change it after the lr is launched - it won't cause the problem untill next restart (at least works for me). And hopefully once my calibrator arrives lr will work ok with its colour profiles..

Std BP address in order updated when changed in master data

Hi all,
For a project with CRM 4.0 and a non-SAP backend, I face this problem.
The following scenario seems to be the standard logic:
- Create an order with a sold-to with this BP's standard address
- Save the order
- Change the standard address of this BP (e.g., the city)
- Check the previously created order and see that the address has been updated
So, there is no new address number created when I create an order and refer to the BP's standard address. Hence, this address is shown in CRMD_ORDER as if it were a view to tx BP. When the BP's address is changed, the order will have the new address 'in' it. My question now is: is it possible to change this logic to ensure that the historical address is kept in the order for eternity (either by saving the address in each different order or by customizing the address entrance, or by some other way)?
Thanks in advance,
Joost Janssens

HI Joost Janssens
You can create one more standard adrress (In the Address Overview tab page), with the changes instead of changing the existing address and can execute the Move option, which will have the validity periods for both the standard address.
Following link below, hope it will help:
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm">Address Data</a>
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/52/cff837a9aae651e10000009b38f8cf/frameset.htm">Executing a Move for Address</a>
Regards
Milan
<b>Please reward with points</b>

Tables updated when changing Transfer order

Hi all,
I am facing a problem when I am trying to change storage bin (NLPLA) & storage type(NLTYP) in a Transfer Order and then confirming it, I am updating 4 tables directely i.e LTAP, LEIN, LQUA, LAGP, but when confirming the TO, gives an SAP error. The reason of course is that something is not getting updated.
<b>Can someone please advise what else should be updated or suggest me a FM which can change storage bin and storage type in the same TO.</b>
I do not want to make a new TO with an FM.
Regards
Abhishek

Hi,
Try the fun module for TO update:
L_DELIVERY_TRANSFER_ORDER_UPD
Look at the other fun modules related to TO's.
L_MC_TRANSFER_ORDER
PK_GET_DATA_FOR_TRANSFER_ORDER
WS_LM_TRANSFER_ORDER_ADD
WS_LM_TRANSFER_ORDER_CONFIRM
WS_LM_TRANSFER_ORDER_CREATE
WS_LM_TRANSFER_ORDER_DISPLAY
Regards,
Anji

The Creator of an Assigned Tasks is not Updated when Changed from Mobile Device

We have a Shared Mailbox where we create Tasks and assign them to the appropriate engineer. In Outlook, if they open and modify the assigned task, after they have accepted it of course, and then save it, a message is received in the Shared Mailbox with the
update. When that is opened and closed, the task on the Shared Mailbox is updated.
However, if that Task is updated on a mobile device, WP8.1 in this case, the creator does not get a new message with the changes. If the assigned user looks at it in Outlook, he/she will see the changes. But the originator never receives a message
with the changes.
Am I missing something or is this by design? Thank you in advance for any assistance.

Anyone?

Time Capsule don't work when change base station password

Hello.
I bought a Time Capsule in 8th April 2010. In August 2010 it begun report problems (the message "Finishing backup..." always appeared and backup never ended, beyond Finder crashed all time with the pop up message error - 10810).
In January of this year, the device just didn't worked. Actually, when it turned on just the Airport function worked. In 29th of that month I receive a brand new TC after I went to technical support.
But, in 17th April 2011, it just didn't worked. At all. And, for my bad, at this time, the garantee was expired.
What I did? Well, I restarted it with default configuration (many times) until can access the hard drive. Even erase the disk (after restore some backups when I had the chance).
Well, after this, It works again. But the TC base station password now can't changed.
Actually it can be changed. But, if I do this, the TimeMachine don't get make HD TC's avaliable. And I just don't know why.
I say this because after I restored, manually, the base station password to this default settings (password "public", without quote), it returned works normally.
But I want change this password, because all my backups will be visible for that one's that have a Mac and access my TimeCapsule device.
I think this product is the greatest Fail of Apple. Many people reclaims about it, mainly for its short life and overheating.
Anyway, if there is any people that could help me, I'll appreciate!
I'm brazilian and I'm not so good in English. So I could make some grammar mistakes. Sorry about that.
By the way, if its possible, that one's that answer my question, please, don't use many slang.
Thanks

The screenshots are here https://twitpic.com/4yeock and https://twitpic.com/4ytaks. Sorry for delay!
By the way, after I change the password for grab these screens I can not access my TimeCapsule HD again.
I'm trying (and trying, and trying, again and again) access it after restore to the default settings, but I haven't any sucess.
Ah. Now a message, like this "You are with the device default change. Are you sure keeping this?", appears when I try modify just the network password (keeping the original password device, that is "public").

Placed files don't update when changed

Similar Messages

Maybe you are looking for