Plan data from 2 applications(mulitprovider)

Hi Experts,
I would like to see plan data of 2 bpc applications( X & Y) via bex query. our version is bpc75nwsp04.
By default when application created in bpc, system generates one mulitiprovider. In my case, i used mulitprovider of X and in that included bw enabled cube of Y(i.e Y_B cube). I created a query on multiprovider and trying to see the output.
Is the way what i proceed is right? Is it anyway disturbed by optimization process in future.
Regards,
Laxman

Optimization should not distub the multiprovider, that is the purpose of having the MP. However I would caution you on some other things regarding using BEx queries on BPC content....
- Avoids BPC shared query engine
- Sign handling by account type is ignored
- BPC authorizations (member access security) is circumvented
- BPC Measures are not available
- Dim formulas are not known
- Comments can't be seen
- Hierarchy display can be an issue
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Similar Messages

Extraction of plan data from S&OP HANA (on-premise)

Hi Experts,
We are integrating S&OP on-premise (source) with CRM (target) application for sales forecasting, can you guide as to which table to extract plan data from?
Regards,
Aditya G

Are you attempting to extract calculated key figure data or stored key figure data. The latter will be much easier due to the construct of the system. Stored key figure data can be found in the 'timeseries' table.
Stored data surfaces from the join of three main tables.
xxx represents your planning area name
### represents your time profile #
Note schema and table names might not be exactly as written below, since I'm going off memory.
SAPSOPG.SOPDM.PLOBJECT_xxx
SAPSOPG.SOPDM.TIMESERIES_xxx
SAPSOPG.SOPDM.TIMEPROFILE_###
Conversely the stored data can be extracted using the generated hana analytic view for your planningrp area. I don't recall the exact path to that view from memory.
Calculated key figure data extraction would require extra prescriptions that I'll defer to an expert to better explain.

How to upload data from application server

Hi,
please help me out in uploading the data from application server which is a tab delemited file into an internal table.
Thanks
kumar

hi,
Use this sample code as an example.
table declaration
tables: mara.
*data declaration
data: begin of it_lfa1 occurs 0,
vendor like lfa1-lifnr,
land1 like lfa1-land1,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
end of it_lfa1.
selection screen
selection-screen: begin of block b1 with frame.
parameters: p_file type rlgrap-filename obligatory.
selection-screen: end of block b1.
at selection screen
at selection-screen on value-request for p_file.
*& start-of-selection
start-of-selection.
perform transfer_file using p_file.
perform write.
*& Form transfer_file
text
-->P_P_FILE text
form transfer_file using p_p_file.
data: l_message(30) type c.
***opening dataset for reading
open dataset p_p_file for input in text mode encoding default message
l_message.
if sy-subrc ne 0.
message i001(zerr2) with p_p_file.
endif.
*******transferring data from file to app server.
do.
read dataset p_p_file into it_lfa1.
if sy-subrc = 0.
append it_lfa1.
clear it_lfa1.
else.
exit.
endif.
enddo.
*******closing dataset
close dataset p_p_file.
endform. " transfer_file
*& Form write
text
--> p1 text
<-- p2 text
form write .
loop at it_lfa1.
write:/ it_lfa1-vendor,
it_lfa1-land1,
it_lfa1-name1,
it_lfa1-ort01.
endloop.
endform. " write
Thanks
Aneesh.

How to get data from application server

hi experts,
when i load data from application server(.csv file) to ODS, data all goes one column.
in infopackage exterdata tabstrip i have given the below values.
escape sign is "
data separator is ,
separator for thousands is ,
my sample data:
"1010000";"A410";"03.2008";"113.5704531"
"1010000";"A410";"04.2008";"93.1146410"
any ideas..
Siri

Hi Siri,
You should look in the T.Code :RSCUSTV1
BW:Settings for Flat File
Thousand separator
Dec. point separator
Field separator
Field delimiter
Then you can use the Same Characterstics while creating the Flat file & also passing the same in Info Package
This will resolve your issue
Regards
Hari

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

Download 350MB of data from Application Server to Presentation server

i want to Download 350MB(Around 2.5Million record of Table BSEG) of data from Application Server to Presentation server..
i have tried with the transaction CG3Y and program using open dataset,read dataset,close dataset,ws_download...but went in vain,,,ended with TIMEOUT ERROR..will OPEN DATASET 'path' FOR OUTPUT FILTER 'Compress' be helpful
..please help me ..its urgent..

you can do the FTP with Unix commands..
initially connect to the application server by using command
FTP <app server ip>,then it willl ask for username and password... after successful connection you can use the following commnads to transfer file
lcd <destination path name>(set the dest path)
cd <source path>(set the sorce path),
get <filename to be transfererd>( do the transfer)....
You can do same with ABAP code also, for this you need to use some function modules like..
FTP_CONNECT ( to establish the connection)
FTP_COMMAND ( to execute the commands like cd, lcd get,put)
finally FTP_DISCONNECT to close the open connection...
for further details refer standard program RSFTP002,RSFTP003....
reward points if helpful...

Error while loading data from application server

Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
Praveen

It looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian

Dump while downloading data from Application Server File in 4.6 system

Hi,
When we are trying to upload data from Application Server to internal table using dataset statements, it is resulting in a dump. System we are using is 4.6c.
When we faced similar kind of issue in ECC version, we have used the statement, Ignoring Conversion Errors.
Please let me know how to handle this situation in 4.6 System.
Thanks for your inputs.
Regards,
Phani

Hi All,
I am sorry. My question was wrong. It should be while uploading data from internal table to application server, if there are any special characters, it is going to dump.
I will let you know the dump details and code at the earliesst.
Sorry and Thanks again for your prompt response.
Regards,
Phani.

Retraction cost center plan data from BPC to ECC

HI Experts,
We are integrating BW-BPC.
The client wants to Retract the data from BPC to ECC System for reporting purposes.
u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
What is the options to support this Business Process of getting data from BPC to SAP ECC.
Regards
venu
Edited by: venu WAD on Aug 19, 2011 7:19 AM
Edited by: venu WAD on Aug 19, 2011 10:17 AM

Hi Keyrun:
Please refer to slide 7 of document below.
"SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
>Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
>See SAP Note 525543 for additional documentation on field mapping.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

BPS Copy plan data from one cost center to another using vairables

Hi experts,
I am trying to copy the planning data from one cost center to another in BPS.
I have just done it using a copy function and in the parameter group entering the costs centers for source and destinations.
What I am trying now it is to let the user select what this destination cost center could be.
I don`t know if this can be done using a variable. What I am thinking is; when the user enters executes the parameter group a pop-up appear that let him select the cost center for the destination.
May be this is not possible. Can you suggest me other ways of doing this?
Thanks in advance

Hi,
u can achieve this by creating a variable with the replacement type as 'User Defined Values'. You also need to enable the check box 'Input Allowed by user'. And at the planning level, in the 'Selection' tab, you should map the charecteristic (Cost Center) with the created variable. Same thing should be done at the planning package level.
Then, when you execute the parameter group, a pop-up comes asking for the value of the costcenter.
Regards,
Srinivas Kamireddy.

Delete data from application server

Hi All.
I have created file in application by using OPEN DATA SET, I need to delete from application server after some validation , how to delete?
Please guide me.
Thanks in Advance.

Hi,
DATA FNAME(60) VALUE 'file'.
OPEN DATASET FNAME FOR OUTPUT.
OPEN DATASET FNAME FOR INPUT.
IF SY-SUBRC = 0.
WRITE / 'File found'.
ELSE.
WRITE / 'File not found'.
ENDIF.
DELETE DATASET FNAME.
OPEN DATASET FNAME FOR INPUT.
IF SY-SUBRC = 0.
WRITE / 'File found'.
ELSE.
WRITE / 'File not found'.
ENDIF.
The output appears as follows:
File found
File not found
Use cane Also Use Function Modue: EPS_DELETE_FILE
Regards,
Gurpreet

Delete file data from Application Server

Hello,
How do we delete data from the file on application Server.
For deleting the file, we use DELETE DATASET <filename>.
If we want to delete only the data and not the file, how to address it?
Please let me know.

Hi , please check the following links, maybe using the truncate dataset can be helpful.
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb3c7f358411d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/d5/c3f58e9f3b11d2960000a0c9308b1f/frameset.htm
Another way could be get the file name and store in a var , then delete the file and afterwards
create a new one with the same name as stored in the var.
Thanks,
Walter Oliveira.

Uploading the data from Application server to Database

Hi,
I am trying to upload tab delimited file from application server into database.
I have upload the file from presentation to application server by CGZ3
and i am able to see file in app server with #s and it appers in application server as
10140#A#E#120#abcd#
10146#M#P#300#a.b#
10152#M#P#200#dat123.com##
140#A#P#300#blicksat123.com#
10140#A#E#260#cust1at123.com##
And my notepad records looks like
10140     A     E     120     abcd
10146     M     P     300     a.b
10152     M     P     200     dat123.com
140     A     P     300      blicksat123.com
10140     A     E      260     cust1at123.com
I am using open data set and read dataset to read the file as shown below
DATA:
    l_htab      TYPE c,                " Horizontal tab
    l_line(100) TYPE c.                " Content in the file
l_htab = cl_abap_char_utilities=>horizontal_tab.
Open dataset
OPEN DATASET pp_afname FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
    DO.
Read dataset
      READ DATASET pp_afname INTO l_line.
      IF sy-subrc EQ 0.
        SPLIT l_line AT l_htab
                   INTO fs_file-carrid
                        fs_file-autoind
                        fs_file-commtype
                        fs_file-resptime
                        fs_file-smtpaddr.
        APPEND fs_file TO pt_afile.
      ELSE.
        EXIT.
      ENDIF.                           " IF SY-SUBRC EQ 0.
    ENDDO.                             " DO.
    CLOSE DATASET pp_afname.
ELSE.
    MESSAGE 'Problem in opening the App.Server file' TYPE con_msgtyp_i.
ENDIF.                               " IF sy-subrc EQ 0.
Load the data to the database
PERFORM load_data_to_database USING t_afile.
When i am trying to upload it is taking me to dump and the errpr analysis is like
"The program attempted to interpret the value "26 0 " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible."
Any suggestions on this
Regards
VEnk@

Hi,
Thats the line feed character. After reading the application server file, use this
data: lv_feed type c value CL_ABAP_CHAR_UTILITIES=>CR_LF.
loop at itab.
replace all occurrences of lv_feed in itab-field with space.
modify itab.
endloop.
Vikranth

TRANSFER OF DATA FROM APPLICATION SERVER TO REPORT

I have a file on application serverin T-code AL11(sap directories).I want to bring the data from this file to my report.
Please explain me procedure with example.
I approached below method:
I approached with OPEN DATASET,But i got short dump.
syntax:
open dataset c_dset(file in app.svr.) for output in text mode
encoding default.
transfer c_dset to i_transfer(itab).
close dataset.
short dump:
unable to open file "".
Kindly solve my problem.

Hi Saritha,
If I am not wrong u r trying to read the data from the file which is on the apps server rite?
Use open data set with input for reading the file from application server .......... output is to write the file onto the application server
check the below sample code.......
DATA:
len TYPE i,
text(30) type c,
dir(30) TYPE c VALUE '/tmp/test.txt'.
DATA: begin of data OCCURS 0,
matnr type matnr,
werks type werks_d,
end of data.
START-OF-SELECTION.
CLEAR: text.
OPEN DATASET dir FOR INPUT IN TEXT MODE.
DO.
READ DATASET dir INTO text.
IF SY-SUBRC 0.
EXIT.
ENDIF.
close dataset.

Loading Demand plan data from APO to BW

Hi Gurus,
We have requirement as below.
we have to extract two key figures from APO to BW system
The 2key figures of APO will get data as below:
First key figure has to hold Yearly snap shot and 2nd Key figure has to hold QTY snapshot.
we have constrained production plan & sales plan keyfigures in apo demand planning and the requirement is to extract these 2 keyfigure quaintest into BI.
Data Example as below:
KF1: Yearly snapshot
KF2: Quarterly snapshots
Yearly data means from   Jan to Dec and
Quaterly data is as below
Qtr1 - Dec       JAN to Dec
Qtr2 (in FEB) - Mar to Dec
Qtr3 (in May) - Jun to Dec
Qtr4 (in Aug) - Sep to Dec
so please let me know to how to handle or extract these data into BW.
Thanks,
Shailaja

Hi Venkat,
Yes, both the key figures are ther in the same planning area.
But my question here is how to get that data into BW? meaning...
If APO/DP does the planning in the month of Sep 2010 for Jan to dec 2011 and the
values are like
Sep-10   jan      Feb mar   april may june july aug sep oct   nov dec
               15     14     13      11    10     11     12     16    14         15   22     20
Dec-10   12     14   16        18    29     20    18     15   14    12   17        20
Mar-11          10 12   13       14     15   16    17 18         20
Jul-11                                  20       40     30      40       50
meaning, If the planning is done in the month of Sep 2010 for the yr 2011 as explained above that values should be extracted into BW and the next planning will be done in the month of Dec 2010 again for entire yr of 2011 i.e. Jan 2011 to Dec2011.
But the values should be captured as they are.. that means if i use DSO the values from request1 to request2 will be over written n if i use the cube they will be added up..
Request1 will hold data of Sep2010: planning data
Request2 wil hold Dec 2010 data ....n req3 will hold data of Mar 11...
but users want to see the values or planning figures as they are.
Hope i made my requimrent more detailled.
Please let me know the solution to get the data as it is in BW.
Thanks,
Shailaja

Plan data from 2 applications(mulitprovider)

Similar Messages

Maybe you are looking for