Planned capacity not integrated to Bucket

Hi Experts,
We are working with PPM 5.0 and facing the following scenario:
We have defined an scenario where the item gets the planned capacity from the role demand in the project management system (item process = Integration) and the bucket should roll up that information (bucket process = roll up).
We are getting the integrated information in the item correclty, but when we go to the bucket capacity management, the planned capacity appears as 0. If we include subobjects we can see the correct demand assigned to the item.
For the integration we are running program /RPM/CAP_PLAN_INT
If instead of the integrated value we look at the forecasted which is manual at item level and rolled up at bucket level, the roll up is executed correctly.
Has any of you faced that issue? Are we missing any step to get the rolled up information? Is there any SAP note on this?
Thanks in advance.
Best regards,
Neil

Missing the execution of program /RPM/BUCKET_ROLLUP

Similar Messages

SNP Planned order not following resource bucket capacity/factory calendar

Hi gurus,
SCM 5.0
I am running SNP heuristics for a product and expecting planned orders for it. It has corresponding production data structure and multimixed resource. The resource has an assignd factory calendar and SNP bucket capacity. The bucket capactiy availablity dates of the resouce is consistent with the factory calendar workdays/holidays. Using simple lot for lot strategy, I am expecting heuristics to schedule the planned orders on the dates of the demand in compliance with teh SNP bucket capacity availability of the resource. APO does not schedule on holidays consistent with bucket capactiy. This is true until...
We have a public holiday in factory calendar that needs to become a workday. To remedy this, we put a special rule for the factory calendar and explicitly made that holiday into a workday. The changes were synchronized with APO, and this is also reflected in the bucket capacity of the resourc: former holiday now has bucket capacity after the calendar change. However, when running heuristics, it still does not create SNP planned order on that former holiday that has been changed into workday. Even if it is a public holiday, there is already a special rule for the factory calendar and the resource bucket capacity reflects this correctly. But SNP heuristics seems not to follow this change.
Any ideas on this? looks like a bug.

Hi Edgar,
Yes, when your resource reflects the addional capacity of the holiday turned working day, then it is expected to be considered for the SNP planned order.
Instead of SNP heuristics, you may try to check interactively in SNP planning book, if manual order creation in the bucket works out.
Since this is a mutlimix resource , it can also be checked if in PPDS planned order can be created on the day.
The above checking may not solve your problem , but will get to know if at least manully the bucket is being considered or not.
regards
Datta

Capacity planning is not possible for this info structure

Hi Gurus,
When I create Rough cut planning profile, I am getting error message ""Capacity planning is not possible for this info structure""
I am using info structure S994 copied copied from standard info structure.
Please suggest to oversome this error.
thanks and regards
Murugesan

Hi,
Make sure the capacity planning relevant field is maintained for the Infostructure config setttings in MC7F.
regards
Ratan
Edited by: Ratan on Aug 10, 2009 7:49 PM

Order plan cost not appearing in PS report.

Dear PS friends,
I have an issue in order plan cost updation ( budget report ).
Used the prescribed WBS in maintenance order ( additional data ), but its not appearing in planned cost of CJ31 screen.
Checked the following
a) WBS is account assignment element.
b) Network type order appended indicator in OPSV.
c) Setting in network type parameters for " determine plan
cost".
d) WBS and order - both are showing plan cost when booked separately, but not integrated.
Can anybody help me to resolve this !
Thanks in advance
-- Sri --
Edited by: Srinivasan Madaswamy on May 18, 2008 2:15 PM

Hi,
In case of the maintenance order (Order Category:30)
Please check the follwoing in Tcode OPSV:
1. type is maintained default i.e ++++ (this will consider all the order types mantioned for maintenance order.
2. Please selelct the appropriate controlling area.
3. Appended plan indicator has to be checked mark,
4. Assigned funds in the plan indicator has to be checked mark,
5. In Tcode IW32: In the additional data Tab assign the WBS Element. Save the maintenance order.
Hope its useful.
Reward point if useful. Revert abck if any other issue.
Thanks..

Use of forecast planning function in Integrated planning

Hai ,
Can I Know What is the use forecast planning function in Integrated planning.
Give me One Example.
Please tell What i hv to select in aggregation level, Filter, and Planning function for doing forecast.
Regards
Kishore.

Hi,
Filter is indeed used in IP similar to how planning package was used in BPS. There really is no difference 'conceptually'.
What you have seen is the different options IP offers compared to BPS regarding planning function execution. You can execute planning function directly or using a planning sequence in an application (although in planning modeler, its only a planning sequence that can be executed, for eg., for testing purpose).
If you just execute a planning function without specifying any restriction, it will operate on the entire set of planning data. Whether its a planning sequence or planning function, the data it operates on can be restricted by binding the various characteristics (or variables) using various DPs in the application. What kind of dynamic selection are you looking at?
You can see following links if you have not read them already -
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f8dc73b56bede10000000a11466f/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/44/33a31fd463060ce10000000a155369/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/43/f0f92373b56bede10000000a11466f/content.htm
These are for WAD; you can find similar links for the BI Analyser.

Cost Centre Plan data not updating FAGLFLEXT

Dear Experts,
In our production environment, our cost centre plan is not updating FAGLFLEXT table. Profit centre plan using GP12N is fine.
We are using the New GL and have FIN-CCA and FIN-PCA scenario activated.
Integrated planning is ticked in the planning versions for both Controlling and New GL Plan versions.
Controlling plan version and New GL plan version have the same name.
In table Controlling table COSP, I can see the plan data on business transaction type RKP1.
I expect to see it in FAGLFLEXT with RKP1 but I see no plan values at all.
In fact, in the previous 3 environments, we have not had this problem and cost centre plan and actual has updated FAGLFLEXT. Only in Production...
Any suggestions? Help if you can! Thanks alot,
Deb

Dear Ravi,
I don't think this is the problem.
It seems that:
- the CC plan was created -> it updated CO tables e.g. COSP -> no update to FAGLFLEXT
- the CC plan was deleted -> it updated CO tables with negative value -> updated FALFLEXT with negative value
-the CC plan was update again -> it updated CO table -> updated FAGLFLEXT and balance with negative value is zero
- the CC plan was deleted again -> it updated CO tabe with negative value -> FAGLFLEXT is in minus value!
It seems like somewhere between first and second steps, the scenario FIN-CCA was not behaving like it was active!
Have you come across this before?
Thanks!
Debora

Loading Alias from EBS to planning through erp integrator

Hi all,
Can anybody tell me how to load the member properties from EBS to Hyperion Planning using ERP integrator. My trial only loaded the members with few default properties.
My planning application is classic. And i used mapping type as "single segment". Didnt find any detailed options there to define the member properties.
Thanks

Hello,
I do not believe storage type is available.
The Alias is based on the languages you have defined when you setup your applications inside of ERPi. Not all "aliases" will come over; and only the basic information is actually stored as a description. I would suggest you review the ERPi Admin guide for your release.
Please review the documentation completely and ensure you understand it. The most current documentation can be found at the following URL.
http://download.oracle.com/docs/cd/E17236_01/epm.1112/erpi_admin.pdf
Information retrieved from the source can be found on Page 31.
Information about aliases can be found on Page 34.
Thank you,

Planned capacity Requirement of Past

Dear Experts
I Have selected the profile and displayed the report through CM02 for the past capacity planning Requiremnt.But the problem with report is that it is only showing the capacity of Released order and order status with TECO is not displaying in the report.Please guide me to get the same by selecting the suitable profile.
Actually i want to see the how much was the capacity planned in last month or week.Please tell me some suitable report to get the required output.
Thanks in advance for your valuable help.
AR
Edited by: Amit Rana on Aug 26, 2009 12:45 PM
Edited by: Amit Rana on Aug 26, 2009 12:53 PM

Hi Experts,
i Want to see the Planned capacity for workcentre.I mean to say what was the actual planned capacity of workcenter last week or Month.The system is only displaying order which is having released status system is not considering order status with TECO.This ineed to analyse my capacity requrement for this year Plan vs Actuall.
Please guide me
AR
Edited by: Amit Rana on Aug 26, 2009 2:52 PM

Sales data are not integrated in R/3

Hello
I use BTE DE_BALE on R/3 to integrate data coming from CRM extension (EEWB). Everythig's fine in the customer FM in R/3 : I get the extension data and I add to table CT_IDOC_DATA segment E1KNVVM with these data, but they are not updated in R/3. I try to debughow the IDoc table CT_IDOC_DATA is integrated and there seems to be a problem. I don't know which ALE configuration has to be done to integrate CRM IDocs (IDoc type seemsto be DEBMAS..). How can I check it ? Is there somewhere I can check that data are not integrated ?
Thanks

Hi Karuna
Nice to have a so quick help.
Thanks
Below the source code of my FM :
DATA :
gv_partner_guid     TYPE BU_PARTNER_GUID_BAPI,
gv_partner         TYPE BU_PARTNER,
gv_crm_application LIKE bapimtcs-gen_chrstr VALUE 'Z1HT',
s_eewb_saledata    TYPE ZZ1HT_BUPA_MAIN_APPEND,
t_salesdata TYPE ZZ1HT_TABLE,
s_salesdata LIKE LINE OF t_salesdata,
t_knvv TYPE STANDARD TABLE OF KNVV ,
s_knvv LIKE LINE OF t_knvv,
s_bapimtcs TYPE BAPIMTCS,
t_bapimtcs TYPE STANDARD TABLE OF BAPIMTCS,
ls_e1knvvm LIKE E1KNVVM.
REFRESH : t_salesdata,t_knvv,t_bapimtcs.
CLEAR : s_salesdata,s_knvv,s_eewb_saledata,gv_partner_guid,gv_partner,
          s_bapimtcs,ls_e1knvvm.
IF sy-uname EQ 'SAGUETTA'.
    break-point.
ELSE.
    EXIT.
ENDIF.
MOVE is_complex_structure-header-object_instance-bpartnerguid
TO   gv_partner_guid.
MOVE IS_COMPLEX_STRUCTURE-header-object_instance-bpartner
TO gv_partner.
LOOP AT it_bapimtcs INTO s_bapimtcs.
    APPEND s_bapimtcs TO t_bapimtcs.
ENDLOOP.
CALL FUNCTION 'COM_BUPA_BAPIMTCS_TO_SET'
    EXPORTING
      iv_partner_guid = gv_partner_guid
      iv_application = gv_crm_application
    CHANGING
      ct_bapimtcs     = t_bapimtcs
      cs_set          = s_eewb_saledata.
MOVE s_eewb_saledata-ZZ1HT_DATA TO t_salesdata.
LOOP AT t_salesdata into s_salesdata.
    CALL FUNCTION 'PI_BP_INIT_IDOC_STRUCTURES'
      IMPORTING
        ES_E1KNVVM = LS_E1KNVVM
      EXCEPTIONS
        OTHERS     = 0.
    MOVE s_salesdata-data_key-salesdom(4) TO LS_E1KNVVM-vkorg.
    MOVE s_salesdata-data_key-salesdom+4(2) TO LS_E1KNVVM-vtweg.
    MOVE s_salesdata-data_key-salesdom+6(2) TO LS_E1KNVVM-spart.
    MOVE s_salesdata-data-perfk TO LS_E1KNVVM-perfk.
    MOVE s_salesdata-data-lprio TO LS_E1KNVVM-lprio.
    CT_IDOC_DATA-MANDT = sy-mandt.
    ls_e1knvvm-msgfn = '004'.
    CT_IDOC_DATA-SEGNAM = 'E1KNVVM'.
    CT_IDOC_DATA-SDATA = ls_e1knvvm.
    APPEND CT_IDOC_DATA.
    CLEAR ls_e1knvvm.
ENDLOOP.

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

Error in Backup - This plan dose not include any itmes to back up

Apple re-installed my OS 10.3.9 on my G5, but now my iMac backup dose not work.
For my backup plan
This plan dose not include any items to back up!.
The Back Up button is grayed out,
How do I add items to the backup plan?
I was backing up before the OS re-install

Thanks. I hadn't seen that before and I'll have to look into it a little more. The one thing that has me wondering is the part where they state that the iPod touch is now supported "for iPod to computer transfers only". I would think that given the nature of the product there would have to be some way to transfer the data back to the iPod... I might have a look at the demo version after work here. I guess the obvious question is; have you used this with an iPod touch and had success?
Edit: Just noticed this seems to be a Windows product only so it won't actually help me. Thanks though.
Message was edited by: rael

SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

H/W: SPA3000
F/W: 3.1.20(GW)
Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
Dial "17474743246#" which works for gw1.
Dial "#17474743246" which also works for gw1.
Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
Is there any way to specify Interdigit Short Timer with <:@gw0>?
BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

Master Project Plan is not updatineg

I'm running in a situation where I have a master plan with sub-projects, the master plan will not show the updated sub-project plans in the web app until you open the master project in project professional and expand the sub-project summary task every time
it get an update, then you have to publish the master plan, then the master project will show the date changes in the web app.
Is there a way to make the updates on sub projects show up on the master project immediately without going through all that?

Sgasgous --
It appears so. I have not extensively used master projects in Project Server 2013, so I will gladly invite the others in this forum to correct me if my answer to you is wrong. For me personally, I have never expected the behavior you expect from
PWA. My habit is always to open the master project in Microsoft Project after updates are applied, expand all of the subprojects, and begin doing variance analysis. The process of applying updates will inevitably cause variances, which need to
be known and addressed. After doing that, only then would I save and publish the latest schedule changes. In fact, I would recommend this approach as a best practice for you as well! Hope this helps.
Dale A. Howard [MVP]

Copy Key figure data between two planning area with different storage bucket profile

Hi,
I have a DP planning area ' PA1' with monthly storage bucket profile data view 'PA1M' ( monthly TBF) and I want to copy the data to another planning area 'PA2' whose storage bucket is weekly. This would need me to write a custom program which will split monthly to weekly and then populate 'PA2'.
However, In 'PA2', I created two data views 'PA2W' (with weekly time bucket profile) and 'PA2M' (with Monthly Time bucket profile). If I am able to copy the data from PA1 (PA1M) to PA2(PA2M), it will automatically splits monthly to weekly in PA2W.
So my question is if there exists a way I can copy key figure data from PA1M to PA2M? Any BAPI?

Hi Rakesh,
You can use COPY/Version Management Function to do this.
Path: Demand Planning > Environment >Copy/ Version Management
The system takes into account only those periodicities that are common to both planning areas.
For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
hope this wil help to understand the basic concept.
Kapil

Oracle BAM 10.1.3.4 and IBM WebSphere MQ 6.0, Enterprise Link Plan does not

Hello All,
1. I have a BAM 10.1.3.4 installation and a IBM Webspehere MQ client V6.0 installed in the same server
2. Have configured JmsAdmin appropriately to have a Topic Connection Factory and a Topic Pointing to a Queue in the Server
3. Have tested the client connectivity using ivtRun and MQIVP.class, they seem to work fine connecting to the channel and the topic.
4. I have configured an EMS for IBMWebSphereMQ in BAM with the below given parameters
Name:      BPEL_TO_BAM
Owner:      AMERICAS\Jai_Mani
Created:      12/1/2009 2:07:48 AM
Last modified:      12/1/2009 9:48:03 AM
Type:      IBM WebSphere MQ
Initial Context Factory:      com.sun.jndi.fscontext.RefFSContextFactory.
JNDI Service Provider URL:      file:/C:/JNDI-BOSS-DAO.
TopicConnectionFactory Name:      ivtTCF.
Topic Name:      ivtT.
JMS Message Type:      TextMessage.
Durable Subscriber Name (Optional):      .
Message Selector (Optional):      .
Client ID (Optional):      .
Name      Flow name      Type      Max size      Formatting
rawData.      rawData.      String      40000      (none).
5. I have a subscribe plan configured in to enterprise Link which has a EMSReceiever and a grid to display the messages
6. I have the "run forever" flag checked in the Receiver and go a head and post a message in the Queue configured in the server.
7. The plan does not display any messages in the grid.
All configuration on the MQ Server and Client side are proper but BAM EL Plan is not displaying the data in the grid.
Have also had turned on DEBUG on the servers and restarted BAM, they don't seem to throw any errors.
Kindly advice, what could be wrong in the Plan or EMS configuration which is causing this.
Thanks & regards,
Jai.

Is this working for you? What errors do you get in the logs (bam, EL)?

Planned capacity not integrated to Bucket

Similar Messages

Maybe you are looking for