Plant no visible in PO

Gurus,
I have copied a plant & created.When i try to raise a PO,the system is asking to enter the plant.When i press F4 the plant is not listed?.What might be the issue?

Hi ,
Address for the Plant is not maintained .
SproEnterprise StructureDefinitionLogistics - GeneralDefine, copy, delete, check plant--Define Plant .
Select your plant and press Shift+F5
Regards
Ramesh ch

Similar Messages

Delivering Plant not visible

Hi Friends
I an unable ti understand why the delivering plant is not visible in the delivering plant field in a sales order. I have maintained the delivering plant in customer master but when i create the sales order the plant is visible at the item level but not at the header leve(on the front screen of sales order next to req. delivery date)
Can some one please help me with the solution.
Regards,
Wasim.

Hi Vishal,
Thanks for your feedback. My issue is when you are making a sales order using VA01 on the first screen itself there is the field of delivering plant in the middle of the screen next to the required delivery date. This field is different than the plant field at item level.
I want to populate this field with the delivering plant. But when I enter the plant in this field it is not getting saved. What could be the problem and the possible solution.
Plz help, its very critical.
Regards,
Wasim.

Plant not visible in PR and PO

Dear All
I have defined new Plant and the same is showing when I create Quotation.However when I am trying to create PR or PO it is not showing in Purchase Requisition or Purchase Order.
Any reason for this?

Dear All
The issue was due to factory calendar incorrectly defined.I removed the assignment and it started working.I am yet to analyze what went wromg with factory calendar definition ,once I get to know I will update the thread for everybody's reference
Thanks all for the replies.
Regards
Vaibhav Mahajan

Plant not taking in purchase order

Hi Frnds,
I got a problem while raising PO.
In ME21N, after entering all the details, the plant is not taking up even i enter the plant.
I have 8 plants and out of that if i press F4, only 2 plants are visible. I have checked in OMS@ for qty and value update and its ok..
Kindly help me frnds..
Thanks in advance.
Prabhu
Note : Please search ERP MM forum before posting.
Edited by: Jeyakanthan A on Jun 7, 2011 5:31 PM

Hi
check this
1) check company code and purchsing organization at header level in Po on Purch.Org tab
2) check you have assigen all plant to your company code in t-code OX18
3) check your material inMM60 you defien for your plant or not
Regards
Kailas ugale

Delivery Address in SRM - use of ECC plant address

Hello experts,
we are using SRM 7.0 in the classic scenario. Our goal is to use the ECC plant address as delivery address in ECC purchase orders. This is working just fine if the delivery address in SRM is neither maintained through the attributes nor manually. The only problem for the enduser is, that the ECC plant address is not visible in SRM.
Is there a possibility to make the plant address visible in the SRM Shopping Cart?
Thanks in advance.
T.

For this you may need to put some simple RFC log in DOC_Change_BADI..
Logic:
Pre-requirement:
Mapping between Storage location and ECC address number..
Business logic
Once the use select a storage location the Doc_Change Log will call the ECC to get the address info and populate accordingly under Delivery address tab..
Advantages:
You don't have a risk here to maintain the address information in SRM..
Thanks!!
Bharath

Transports of plants failed

HI Experts,
i am stuck in one issue like below scenario
i have created total 10 plants from Reference plant (EC02) TR(Transport number) also created .. but some configuration part was missing so Created one separate TR for all 10 plants(transportation zone assignment ) . later 5 plants TR has been Marker for do not transport & 5 plants TR has been moved to quality server along with that separate TR. . So in quality server all 10 plants are visible(t001w) but 5 plants are well configured & reaming 5 plants has missing entries. it is happened due to that separate TR for all 10 plants.
now please suggest how to delete these remaining 5 entries from Quality. what are the effects we have to take care now?
Regards
Raj
Sbuject was edited by: Jürgen L

Hi,
If there is no transaction data and other dependent configuration in dev and quality for these plants, you may delete the plant from dev and move the TR to Quality. The same changes will be affected there. If you have documents in the plants to be deleted, I would suggest to archive these docs and then delete the plant.
Regards,
AKPT

User exits/BAdIs for Forecast consumption by sales order

Hello Experts,
My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
My requirement is:
For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
I appreciate if anybody explain me the process?
Thanks in advance!
Raj

Standard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
There is no standard way of making the sales order visible in another location.
Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
Can you be more specific.
THanks
Kumar

Dynamic in UI

Hi,
we are planning to develop an app for our plants in 23 different countries. Each country is using something about 10-20% the same process but there are country specific differences.
Therefore we need a solution like the field control. We are going to build a customizing table with plant | field | visible y/n. The possible fields should be in a table to have the possibility to use it as field value help.
How would you implement a solution like that with a set of 20 fields in a table / row repeater and some variable fields?
This topic is related to NW GW with "dynamic" service.
Greetings, Vanessa

I'm 99.9% sure that the only answer is: don't use Ajax in this particular case. Its a menu, menus are used for navigation, let JSF do its regular navigation magic. But since you use Richfaces perhaps a Richfaces specific component can help you out. Such as the Richfaces dropDownMenu I spot in the showcase. If you're already using a richfaces component and you need help with it, try the actual Richfaces forum.
https://community.jboss.org/en/richfaces?view=discussions

MDM Tuple Fields on EP Iview

Hello,
Can we display tuple fields on EP Screens / Main view ?
I am able to display Fields in Main Table E.G. Vendor Number.
But when it comes to field Plant, which is tuple of Location Data, its not directly displayed on EP Item Detail Iview.
User have to click on EDIT button of field "Location Data" and then field Plant is visible.
Regards,
Purav

This feature is not available in current version of MDM.

Acting as a subcontractor

Hi all,
I am aware of the subcontracting process where we are sending raw materials to vendors, however in my case, it is the other way around and we are the vendors and receiving the raw materials.
Would this process make sense?
1. Create sales order
2. Create PO with 'free item' checked so there is no accounting impact and MIGO goods into inventory
3. Make-to-Order production
4. Deliver goods
5. Invoice
My issue is with the 'free item' on the PO and whether it is the standard way of approaching this or not.
Thanks

Hi,
Have you considered using the following process:
1. Use of the MM consignment procurement process to get the raw materials from your customer. You would need to maintain a vendor record for this consignment PO process.
2.These materials would be managed as special stock in your plant, giving visibility to the partner stock lying at your locations. These would be managed as the same material number.
3. These materials would be transferred to your stock before being issued for production.
4. The settlement for these stock is done at periodic intervals and would depend on the stock withdrawn. It is possible to maintain consignment info records to help with this process.
5. The sales order is created as agreed by the customer, delivered when stock is made available and billed.
You can fine-tune this process to match your requirements. The advantage would be the visibility of stock, ability to undertake physical stock inventories and the determination of settlement amounts for stock issued.
Regards
PD

Costing Variant not visible in CK24 for my plant.

Hello Experts,
Using transaction OKKN, I have created a new costing variant ZPC1 to take the place of PPC1 for updating standard cost in the material master. I basically copied most of the parameters ( including the Costing Type) from PPC1 but changed to a different Valuation Variant. Running CK11n successfully generates a cost estimate without error (status KA) that meets our requirements.
The trouble is in transaction CK24. I click the Marking allowance icon and I see both our actual plant, and the dummy preconfigured plant 0010. For our actual plant, I also see the fields populated for Costing version 1 and Released check mark. If I drill down on our plant, I get a pop-up for "Permitted std cost est variants", showing only PPC1. However, if I drill down on the dummy plant 0010, I first get a search pop-up for "Permitted std cost est variants" with an open field for "Costing Variant". Drilling down further shows both PPC1 and ZPC1.
I think maybe a "Costing Version" has been defined for our actual plant, and that is pre-selecting PPC1 and preventing me from using ZPC1, but when I search in config (transaction OKYD), I see nothing defined.
Any help would be greatly appreciated.

My problem has been solved. There was actually nothing wrong with the configuration.
The problem was that the Marking Allowance had already been activated for costing variant PPC1 in period 11/2009. This was visible from the marking allowance screen by the population of the fields Costing Version 01 and the check mark in the field Releaded.
Now that we have moved on to period 12/2009, the Costing Version is blank and I see both Costing Variants available. When I select a variant to allow marking, the Costing Version gets populated. After running CK11N again to create a cost estimate for period 12, I was then able to Mark and Release my new estimate and verify that the new Standard Price updated in the Material Master.
Thanks for your help, and I hope this record may be of value to others.

STO, MD04 - visibility of outbound delivery at receiving plant MRP

STO raised:
MD04[Supplying plant] - STO appearing
MD04 [Receiving Plant] - STO appearing
Outbound delivery created
MD04[Supplying plant] - Outbound Delivery appearing
MD04 [Receiving Plant] - STO appearing
Goods issued
MD04[Supplying plant] - None
MD04 [Receiving Plant] - STO appearing
How do Receiving plant know goods has been issued from supplying plant?? as MRP doesn't give any indication at receiving plant
automatic Inbound delivery against outbound is only solution?
Experts please help here
Thanls

Hi,
In the MD04 screen when the outbound delivery has been PGI'd at the shipping plant the receiving plant will have an additional column showing up which holds the quantity that has been shipped.

STO returns and visibility of qty at plant vendor in MD04

Hi Guru's,
When I create a return STO in R/3 the requirement appears at the receiving plant in MD04 but no receipt appears at the supplying plant (it is a return so opposite to normal). When I create a delivery for this STO nothing changes in the MD04 view at receiving or supplying plant.
We would like to see the return and the return delivery as a receipt in MD04 so it it contributes to available qty. Can you provide some ideas on how this could be done?
Thanks
Andrew

Hi,
I have similar problem for our client. Can you explain me how to you resolved the issue?
Thanks,
Muthu

To limit the access of PM data based on the Company Code, Plant & Location

Hi Experts,
         I have a requirement . Customer wants to Restrict the access of PM data for a user based on the company code,
Plant & Location.
Say user : XYZ
Plant :1000
CCODE:1000
Location:0001
So you can see data of only this Organisation structure .No other data will be visible to him.
I know we can do it using authorisation object
Can you Suggest me how can we do this.
Regards,
Amar

Hi,
You can achieve this by maitaing these values in user authrisations. If you want more info about the objects check SU22 t code under PM.
For Plant              I_IWERK
For Location       I_ILOA
Regards,
N.Nagaraju

Activating auto PO Check Box in the purchasing view for plant level.

Hi Techies,
Right now i have an issue related to auto PO check box in the purchasing view for the plant level. There are three plants A,B,C.. For the plants A and B the automatic PO check box is visible and the user is able to provide input values. But when it comes to plant C the auto PO field is not available and hence the user is unable to provide input for auto PO.
Is there any configuration to be done to activate the auto PO check box in the purchasing view in the material master with respect to plant C?
If so could you please guide me with the settings?
Thanking you in advance.
Regards,
Gopalakrishnan.S
Edited by: krishu100 on Jul 13, 2011 2:25 AM

Hi Techies thanks for you all info.
Now today i just tried to created a new HALB Material in the plant C which i had issues yesterday. But when i created today a new material the Auto PO feild is available for entry. THen i tried to go to the material which i created yesterday for editing it. But i was unable to do it.
I checked the transactions which most of you referred(Very Useful). I found that all the plant s had the same screen selction setting and set as Opt Entry. The field screen referrence for MM01, MM02 Transaction s are also set as opt entry. The screen reference for HALB is also set as Opt entry. Still i m not able to find the field auto PO in the purchasing field.
So does it mean that a material once created without auto PO enabled or visible can never be updated after that? But i think its not the case and we should be able to edit it(correct me if im wrong).
Really having my fingers crossed to find a solution for this issue.
Regards,
Gopalakrishnan.S

Plant no visible in PO

Similar Messages

Maybe you are looking for