Plant to plant transfer in Q status

Hello,
Can someone please provide the steps to configure movement type to allow plant to plant transfer of stock with Q status? Can this be accomplished with custom movement type configuration or a user exit is available? Please advise.
Thanks,
avi

Hi Avi,
have you tried Transaction QAC2?
I think you should be able to move Plant stor. loc. to Plant stor. loc.
Edit: You will have to make sure that QM has been set up for the receiving plant as well.
More information can be found [here|http://www.aq33.com/quality-management/Articles-005080.html].
//Magnus
Edited by: Magnus Karlsson on Nov 14, 2011 11:05 AM

Similar Messages

Stock transfer between plant to plant in blocked status

Hi Gurus,
Can anybody know how to use some mov. type to transfer restricted status between plant to plant?
Many thanks in advanced.
Luiz Geraldi

Luiz,
You cannot move 'blocked' or 'restricted' stock in this manner. This is not supported in ECC 5.0 and I would not think ECC 6.0 would be any different in this regard as this is a basic rule within standard SAP although I would think that in certain situations it would be beneficial to be able manage this in a simple move.
- As others have correctly pointed out, you have to change the stock status to 'unrestricted use', transfer/receive it (either using mvt 301, 303/305, 351/101, 641/101, 643/101 etc depending on the stock transfer mechanism used between the plants) and then finally change the stock status back to 'blocked'.
- Another option would to be to post an inventory adjustment using mvts 701/702 in both the plants and then change stock status in receiving plant to 'blocked'.
- Design a custom ABAP program to perform the sequence of movements in a single transaction. I think it would be important to get the timing right to avoid incorrect booking of stock.
- The movements could be also be linked in a single transaction using a workflow solution although I am not sure how simple or complex the solution might be.
Unfortunately, the quantity strings associated with movement types are hard-coded by SAP. So, it would not be possible to achieve this move using a custom movement type without any modifications.
Hope this helps.
H Narayan

Issue with Plant to Plant Transfer Mvt type 301

Hi,
I'm trying to do a Plant to Plant Transfer using MB1B/MIGO,mvt type 301, from a plant / Storage location which is NON HU managed to a plant / Storage location which is HU Managed, I'm getting this error,
Message No : VL296.
HU cannot be delivrd from plant XXX stor. loc. XXX to plant YYYY stor. loc YYYY
Has anyone come across this error ? Any solutions?
Many thanks
Feroz

Hi Feroz
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types.
if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock
please refer to the below link for additional details
link[http://www.sap-img.com/sap-hu.htm]
Regards
Vikrant

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Production in Aternative Plant with stock transfer

Hello,
For our MTO process we have prototyped several scenarios for production of configurable materials over more plants, all based on special procurement keys.
Scenario 1: procured from other plant with stock transfer (41)
Scenario 2: production in alternative plant (80)
With respect to the configuration process and ATP, scenario 2 has our preference. There is one discrepancy, since the plants are far away from each other we need a stock transfer (and paperwork for transportation) between the 2 plants.
However a feature of production in an alternative plant is that the GR of the semi-finished good is directly in the planning plant.
Of course we can do a transfer order w/o reference for the semi-finished good from plant A to plant B but nothing is triggering this process and for us no option.
Any idea how to get such process nicely streamlined? Is there a usable workaround?
Thanks, Hans
(note: If no clues, I intend to bring it in as a request for SAP customer influence)

Thanks Vaibhav,
All required CTP settings maintained and ther is PDS in alternative production plant too. The reason being when I remove special proc key APO CTP created planned order for the deficit qty.
Did you mean to say Original plant means planning plant? but there proc type has to be E with special proc as "80" .SPRO setting is maintained.(maintained Location Determnation settings as you mentioned) I have already tried "X"
but did not work..
Rgds
SCMBEE

Automatic update of vendor code during plant to plant Transfer

Hi all,
How to configure automatic update of vendor code during plant to plant Transfer.
Regards
KK

hi,
In transfer posting there is no buying/selling of the goods...there is only transfers may be from plant ot plant...or storage loc to st location...etc...
When you do plant to plant stock transfer, there is no role of the vendor...but the receiving and the destination plant/storage loc plays a big role...
Hope its clear...
Regards
Priyanka.P

Customization for Plant to Plant transfer

Hi Everybody !
There is a requirement saying that the system should request Incoming Certificate for the GR which is based on a Transfer Order(i.e. Plant to Plant transfer).
From the answers to my previous query I know that standard SAP does not supports this. So can anyone suggest any config change or ABAP developement which makes this possible ? Please give a detailed answer so that I can follow that and make this happen in my system.
Regards,
Manish.

As stated, the system doesn't support the COA requirement when your not treating the plant as a vendor.
1) Why are they requiring a COA anyway? There is no business benefit to that. In every client I've worked for we have done away with these. It was common practice at one time when plants had separate quality systems and business systems. But with all plants on one SAP system, data can be accessed for any plant. If the receiving plant needs to send out COA's they should be generated by SAP so there should be no need to have a hard-copy.
There is no ISO or GMP rule that these type of shipments require COA's. In fact, when all the plants are on the same system, they should discourage it.
2) if you really want to check for a COA, include the check as a pass/fail qualtitative characteristic as part of an 08 inspection lot.
Craig

Intercompany and Intracompany (plant to plant) Stock Transfer scenarios

Hello!
I have an issue regarding Intercompany and Intracompany (plant to plant) Stock Transfer scenarios.
We are implementing Brasil.
Brasil has 11 different plants and all of them can transfer stock to each other, so the Intracompany stock transfer scenario has to be done for this country.
Brasil also sends products to other countries (also with SAP implemented) from one of the 11 plants, so the Itercompany stock transfer scenario also has to be customized for Brasil and for at least one of the plants in Brasil.
We have a distribution channel for Replacement market (L1), and another distribution channel for Export market (L7).
In the scenario described above we have one plant being used for both scenarios, for Intracompany Stock Transfer and for Intercompany Stock Transfer, by two different distribution channels (Replacement market (L1), and another distribution channel for Export market.
In the customizing we have a unique plant, but we have two different sales areas to be assigned to it, in order to be able to execute those processes.
My question is:
If the customizing to be done for the both scenarios is the same, my request is to have both scenarios for the same plant, and I have two different Sales Area for each scenario, is there a way to make both scenarios work together for the same plant and different sales area?
Best Regards
Cristina

Please dont post the same question in multiple forums. Continue in one thread
thanks
G. Lakshmipathi

Project Transfer From Plant to Plant

Dear All,
We have New Plant created 2000.
1000-nm3-abc25 has been created in 1000 Plant earlier and now we will in process of transfer of this project to 2000 Plant.
We have Open PR/PO, Advances, Stock, CWIP etc on our Projects. Almost 90% of the Budget has been utilized.
Please provide stepwise procedures which addresses the complete activities involved in this process.
Regards

Hi,
As per me this will not be possible.
Because you have Open PR/PO, Advances, Stock, CWIP etc on our Projects. Almost 90% of the Budget has been utilized.
In SAP,I don't think so any procedure will be available for such kind of Project transfer from Plant to Plant.
Regards
Sandeep

SAP MM Batch characteristics during Plant to plant stock transfer

Hello,
I have a requirement where if i have 100 kg of a batch A in X plant and i transfer 70 kg of this batch A to Y plant. So now i have 70 kg of Batch A in X plant and 30 kg in Y plant.
I want the batch characteristics of the batch A to be copied in Plant B as well, but when plant B does some quality testing and overwrites a few batch characteritics this should not affect the batch characteritics of the Batch A in plant X. ( We donot want to create a new batch in Plant Y due to traceability reasons)
We have maintained Batch level at "Plant level" in config
Any pointers to userexit to force copy the batch characteristics initially from Plant X to Plant Y for Batch A is also welcome.
Thanks
Anurag

Please dont post the same question in multiple forums. Continue in one thread
thanks
G. Lakshmipathi

Help for bdc for transfer of asset plant wise stock transfer(urgent)

hi all,
if anyone has done BDC for this scenario ie.,
bdc for transfer of asset plant wise stock transfer
then plz share its code with me.and if someone has done any modification regarding this scenario then plz let me know that what modification he/she has carried out in this & share the code for the same.
i will be grateful to u for this and promise that i will give points to all ur effort.
Thanks & regards
Sanjeev

Hi Sanjeev,
Do a recording for the transaction using SHDB. Once you are done with the recording save the recording into a zprogram. You have the code.
Regards
Arun

Bdc code for transfer of asset plant wise stock transfer (urgent)

hi all,
if anyone has done BDC for this scenario ie.,
bdc for transfer of asset plant wise stock transfer
then plz share its code with me.and if someone has done any modification regarding this scenario then plz let me know that what modification he/she has carried out in this & share the code for the same.
i will be grateful to u for this and promise that i will give points to all ur effort.
Thanks & regards
Sanjeev

Hi Sanjeev,
Do a recording for the transaction using SHDB. Once you are done with the recording save the recording into a zprogram. You have the code.
Regards
Arun

Stock transfer between plants- 1 plant with no excise & 1 plant with excise

Dear Sir,
We have 6 plants working under SAP version 6.0 and in all the plants excise is applicable i.e. modvat can be taken. Now a new plant say X is coming up under the same company code in which excise modvat won't be applicable. In this scenaripo when we will do stock transfer from existing plants excise will be applicable on the material sent to plant X but at the time of receiving the material at plant X this excise amount must be inventorised on material as modvat is not applicable in this plant. Similarly when we despatch the material from plant X to other existing plants material cost will be with excise value.
Pl. guide me that how this scenario to be configuered.
Thanks in advance.
Rajiv

Hi Rajiv
<b>Only you need to do is</b>
In plant X which is not registered with excise, there you have no need to maintain excise related data of material master record i mean in J1id. So this will post your exsice amount to your inventory cost.
Secondly if material is sent from Plant X to excisable plant this plant X can not levi excise duty as its not regeisetered one.
Regards
Vivek
-- Reward if helful !!

Is BOM required in both plants in strock transfer scenario

Dear SAP Gurus,
In Make to Order Scenario, Plant1 is Process Plant and Plant 2 is Sales Plant.
Actually Customer place the order from Plant2, Material require Sales BOM, how do we transfer the stock from Plant1 to Plant2.
In Plant2 client only maintain Finished Goods.
do we have to maintain the BOM componets in Plant2 also.
very urgent,
thanks in advance,
Sathya..............

Hi Sathya,
1.You are telling that sales BOM is required and sales is happening in the plant 2, so you need to main tain the sales BOM in the plant 2 only.
2. You are manufacturing at Plant 1 then you are sending the goods to the plant2 through STO right,here maintaining the BOM depends upon you, If you are sending the material as components to plant2 there is no need of BOM,or If you are planning to send the material with the combination of components then you require BOM same as Plant2
I hope it will help you
Thanks,
Murali.

Transfer Posting of Restricted stock Plant to Plant

Hi,
How to do transfer posting of restricted stock Plant to Plant
Kunal

HI
One step stock transfer from one plant to another is 301 movement type.. Remember the stock should be in unrestricted use. If it is in quality and or blocked the same will not work
2 step process is 303 and 305
From Stock transfer order Documnt type UB with item category as U. Movement type used is 351 and 101

Plant to plant transfer in Q status

Similar Messages

Maybe you are looking for