Play Status Question

Hi I have what looks like a fast reverse symbol in my play status on my IPOD. I can't see whether it is playing or paused. does anyone know what this is and how to remove it?
IBM   Windows XP  

greetings everyone and a happy new year. am a new
shuffle owner and after getting over the initial
familiarization, ive come across a situation. in all
of the documentation (online, print, forums)
concerning battery light status, there ISN'T an
implicit indication that both lights (top and bottom)
will light up simultaneously when doing a battery
check. so if anyone here could offer some
thoughts/answers i would very much appreciate it. i
understand that to check battery status you switch
the shuffle on and off within 5 seconds, the shuffle
will continue to play and the status light will
indicate charge. my question is, are BOTH top and
bottom lights supposed to indicate this or only the
bottom (i.e. next to the on/off switch)? funny me but
it struck me as odd that this morning only the bottom
light showed battery status when i thought the top
would. fyi, the lights on my shuffle work in every
manner as its supposed to EXCEPT this battery status
(either it doesn't or isnt supposed to). thanks very
much beforehand.
According to the manual:
"...iPod shuffle has two status lights, one on the top and one on the bottom, that let you know when you’ve pressed a button, the state of the battery, that iPod shuffle is enabled as a disk, or if there’s something wrong... "
HOWEVER, my experience is that same as yours: ONLY the LED next to the switch shows battery status. BOTH bottom and top LED light to show button pushes, etc...

Similar Messages

  • IPod 4th Gen not updating "played" status.

    Hi, recently I'm having a problem with my Ipod touch 4th Gen. It works fine, plays music and videos normally, but it does not update the "last played" status, nor "last played date". This is a problem because I sync my videos based on "most recent not played", and I have some smartlists that make use of that statur or date too.
    This happened once before I upgraded from iOS 5 to Six, but apparently was corrected; however, since I upgraded to iOS 6, none of my played items is being updated. Could it be because of the iOS upgrading, or maybe there is something else I'm missing?

    iOS: Device not recognized in iTunes for Mac OS X
    It will not show up in Finder/Spotlight search

  • Fast forward icon in the play status display

    for the past few days, instead of displaying a play or pause icon in the upper-left hand corner (the play status), my ipod is displaying a fastforward icon. that's it. not that anything else is wrong, i just get worried when anything out of the ordinary happens. give me a shout. thanks.
    Toshiba Notebook   Windows XP Pro  

    You will want to reset your iPod...
    Resetting iPod
    This does not affect the data on your iPod. It is similar to restarting a computer.
    Should be working now
    btabz

  • How to synchronise the play status of podcasts between iphone and itunes?

    Hi there, thank you for reading,
    I am annoyed now for a few months about the disfunctional synchronizing between my iphone and itunes when it's about the play status of podcasts.
    I get new podcasts in every new day and i play many, so it's essential to see immediately which are new and which i have listened to or have half-listened.
    This functionality was there when podcasts were still played in the Music app on the iphone, but now it's moved to a podcast app, it doesn't. Weird.
    I run the most recent software and the hardware is fine. If you have any to get around the daily manual synchronisation, please let me know.

    Hi Jim - thanks so much for your detailed & helpful reply. I actually do already have those columns shown in my playlist views - my problem is that I don't believe what they are showing!
    For instance, out of my c.13k tracks, my smart playlists count:
    Matched - 42
    Ineligable - 46
    Purchased - 15
    Not Matched - 121
    Uploaded  - 27
    Error - 13,060
    When I first started using Match it spent several days uploading tracks, and now is having another incremental go, and showing 325 of 1464 Uploaded.
    Ah - that's interesting - I just looked at my 'iCloud Matched' playlist on my iPhone, and it says there are 11,876 tracks in it, even though iTuns on my MacBookpro shows 42! But then my iPhone also shows 11,876 in the 'iCloud Error' list. And in my 'Ineligble' list. And my 'Purchased' list...so who knows! Which was the thinking behind my original query.
    But I do appreciate your reply Jim, which has been helpful even with the above situation.
    Cheers,
    Mark

  • Captivate 6 - Published - PDF does not play quiz questions

    I just published my captivate 6 presentation.  I am launching the .pdf file to view.  At the end, the quiz questions do not work.  I get a white screen and not my questions.  Any ideas?  Thanks

    Below is a screen shot of the published settings.  The whole training presentation plays as expected.  Then when it gets to the quiz questions I get a white screen and nothing happens. 
    After I publish, I go to the zip file and run the pdf version. 
    This is for someone to view the training outside of our LMS system.
    Here are the preferences ....

  • Level 2 status question

    recently recieved an email welcoming me to level 2 and it begins with:
    Please include the line below in follow-up emails for this request.
    Follow-up: 11111111 (random numbers in place of actual ones in the email)
    I dont understand what this is..some type of id?  Thanks!

    shldr2thewheel wrote:
    Follow-up: 11111111 (random numbers in place of actual ones in the email)
    I dont understand what this is..some type of id?  Thanks!
    It's only for answering the email in case you have any questions or remarks about your status and so on.
    On that you should include that "follow up number" in the subject line of the eMail to identify the "follow up" mail and group all mails relating to you.
    It's like a ticket number on support mails.
    Lupunus

  • Row Status Question

    Hi,
    I'm creating a custom page in OAF, and I have a question about row status. I am curious to know if there is a way to determine if a row has been committed to the database yet or if it is just sitting in the cache.
    Basically, we have a 1-1 relationship between two tables. When a user tries to a new record in table B, it must be associated with an existing record in table A. When the user goes to the create page for table B, a new record is immediately created (per the examples in the toolbox tutorial) and the user can enter data and select a record from table A to associate with, via an LOV.
    If a user tries to create a new record in table B using a record in table A that already has an existing association, our client would like us to move them to the already existing record in table B. If we do this, we'd need to discard the new record we originally created so that it does not get entered in the database.
    I'd like to know if there's a way to tell if a row has just been created or if it is a row that was already present on the database. My concern is that a user could sequentially select any number of records from table A that may or may not have an association, so I'd like to be able to tell which rows should be discarded as they go.
    I'm imagining a user goes to the create record page for table B does something like the following while deciding which record from A to associate with:
    1) Select record from A with no association -> use new record for B.
    2) Select another record from A that has association -> move to existing B record, check if record from step 1 is new: if so - discard it, if not - ignore it
    3) Select another record from A that has association -> move to other existing B record, check if record from step 2 is new, if so - discard it, if not - ignore it
    So, I just want to know if it's possible to tell whether a record is new or one that comes from the database.
    Any suggestions will be greatly appreciated!
    Thanks!
    John

    You can use getEntityState() on EO object to get the status of the row. It returns one of the following:
    STATUS_NEW - the entity object is new in the current transaction
    STATUS_DELETED - the entity object originated in the database, and has been deleted in the current transaction
    STATUS_MODIFIED - the entity object originated in the database, and has been changed
    STATUS_UNMODIFIED - the entity object originated in the database, and has not been changed, or it has been changed and those changes have been committed
    STATUS_DEAD - the entity object is new in the current transaction and it has been deleted
    STATUS_INITIALIZED - the entity object is in a "temporary" state and will not be posted or validated

  • Play count question.   I have about 500 songs in my library that I know have played at least once...probably just once.  Although there is a "last played" date listed there is no number in the play count column.   Any reason for this?  thx

    I have about 500 songs in my library that have played one time.   Although a "last date played" date is noted, there is no number in the play count column.  This only happens some times.   Any reason for this, and can it be corrected?  thx

    Thanks, but the play count is not incrementing only on the very first play.  All subsequent plays are fine.  Meaning the play counts for these particular tracks are always one play short.  I double-checked some of the tracks in question and I have not shortened, or stopped them early.

  • General 10.6.5 Status Question

    For the first time in perhaps 10 years, I held off installing an OS release with 10.6.4. The issues with 10.6.5 discussed in this forum caused me to delay installing it too.
    Can anyone give a current summary status of 10.6.5? Should I stay with 10.6.3 or upgrade?
    I know this is not a black-and-white question. I'm looking for some general comments. I have a pretty vanilla installation and use Time Machine.

    In my opinion, the issues discussed for the last two updates aren't materially different from the ones mentioned for any earlier updates. OS updates alway "break" some software & reveal faults in the design of a few hardware peripherals. Every update is at least slightly more demanding of the Mac's own hardware than the last (especially true of RAM) so an update sometimes will reveal a failing or out-of-spec part in the Mac itself. Users often do not know that they have some "special" software installed -- a lot of it is included in what appears to be normal or well-regarded software & that is infrequently documented in release notes or promotional literature.
    Of course, Apple does sometimes introduce an obscure bug in an update, & it must be considered serious if affects your Mac's usability, but that happens much less often than it seems from the reports claiming that here & elsewhere on the web. Many users jump to the conclusion that the update is the cause of their problems without considering anything other than that those problems became evident after applying it. (This is a logical flaw so common it has a nickname, +post hoc+, short for +post hoc; ergo propter hoc+, Latin for "after this; therefore because of this.")
    So part of it is that some users never check for any other cause. Another is that they diligently search for post-update reports of problems sounding like their own, which is relatively easy to do, but not for reports of no problems anything like their own, which is harder to do. (It can be done, for instance by wading through thousands of Discussions posts from users running the update asking about some minor issue or just for info about how to do something. Presumably, if they had serious issues, they would mention them.)
    This tends to feed on itself -- when one reads about a similar sounding post-update problem, it is only natural to post a "me, too" comment as well. Once enough of these posts appear, it is tempting to believe it is a widespread problem (& thus must be caused by the update) without considering that all those posts might represent only a very tiny fraction of update users or that there are many common causes that have nothing to do with the update itself that might be responsible for all the posts.

  • Play all question

    I am looking to make a menu in DVD Stuido Pro
    I want a person to be able to select from the main menu and play each chapter seperately, and when that specific chapter is done for it to go back to the main menu...
    I would also like a feature on the same main menu that says Play All.. that would obviously play them all continiously, without going back each time to the main menu.. can anyone point me in the right direction for that?
    I am using DSP4
    G4   Mac OS X (10.2.x)  

    New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
    If we use the forums properly they will work well...

  • IdeaPad s400 battery status question

    Hi how do i know when the battery if fully charged when the laptop is turn off, the battery light indicator is always on the only way than i can know is touching the charger and if it is cold means that is fully charged.

    Hi Nick,
    Welcome to Lenovo Community Forums!
    I’m glad to inform you the status of the battery and its notifications have been explained in the image below for your S400 Laptop.
    Spoiler (Highlight to read)
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Work Order - TECO Status Question

    Dear All,
    Is there a way to indicate who performed the last accounting transaction with a Work order?
    For example, Who Teco'd the order and when it was Teco'd, etc..
    This allows me to create a report to show productivity of how many work orders being complete.
    Any suggestions will be greatly appreciated. Thank you!
    Mike

    Hello Michale
    From PP Stand point ,if you are looking at TECO of Production order with individual person did , U can use COOIS functionality seleting Sytem Status : TECO  and Give the Production Scheduler .There are lot of functionality u can use within date ranges, plant wise , material wise and u have the option to choose various lay out to generate report from COOIS.
    Hope this will solve your problem.
    Regards
    Jia

  • At&t Order Status Question

    My parents ordered an iPhone via the At&t store 7/23. I just checked the order status today but no iPhone 4 order shows up on the page. Does it take this long for At&t to process an order or is there something I'm missing? Thanks.
    Message was edited by: henryjlu

    henryjlu wrote:
    My parents ordered an iPhone via the At&t store 7/23. I just checked the order status today but no iPhone 4 order shows up on the page. Does it take this long for At&t to process an order or is there something I'm missing? Thanks.
    Message was edited by: henryjlu
    If the order isn't on the page, then something has happened. And yes, it takes up to 3 weeks for the iPhone 4 ships. So an order on 7/23 is not going to arrive until 8/15.

  • TS1717 When I try to play songs from my collection on my laptop or try to play the samples of music from the itunes store on my laptop, the music never plays; It is on the playlist selection and appears as if its in the play status but no music actually p

    I have uninstalled and reinstalled itunes to no avail...
    I have authorized my laptop...
    I have downloaded the 64bit itunes for windows.
    The sound on my laptop is functioning for other applications such as youtube, crackle...
    Has anyone else experienced and found solutions to similar issues?

    Hey m_marrello,
    Take a look at the following article:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    It is quite detailed and goes over many troubleshooting steps to resolve those audio symptoms.
    Best,
    David

  • Playing videos question

    hey sorry if this is in the wrong spot but how do i get music videos and stuff on my computer to play in itunes?? is there a way to change it so that itunes plays all video files instead of real player?

    What version iTunes?
    edit, and what version QuickTime?

Maybe you are looking for