Playstation 3 compressor settings for h.264/mp4 and avchd and 5.1 audio

Hello this is my first post on this forum. I am a cameraman by trade, but do a lot of editing. I am pretty good on an Avid and with color correction software, but since I sold my sony f900 and picked up a couple or RED cameras - I was forced to hop on the FCP studio2 wagon. So I apologize for the newbie questions.
I have a PS3 and not a PSP. I find more and more clients have a PS3 for their media and blu-ray... etc. So my question is what are the settings for compressor to encode for the PS3 and there ever so nit picky and poorly documented parameters.
There are plenty of non-pro answers, but I have searched high and low for what they need specifically. I see lots of questions but now answers.
So how can I take my final cut footage or any video file for that matter, and put it into something that my PS3 can chew? What are the H.264 (mpeg4) settings?
Can I also (but not exclusively) encode in AVCHD from compressor?
Lastly is there a way to put on the 5.1 or surround info into these files for PS3 playback? if I want to take one of my work DVD's (reel, projects, etc) and put it on the PS3 or bring in surround encoded (5.1, 6.1, 7.1) tracks into FCP and put it with my footage?
Thanks for any and all help...
the only vaguely technical info I have found was on the PS3 forum, here is what it says:
from:
http://boardsus.playstation.com/playstation/board/message?board.id=ps3media&mess age.id=22987&query.id=96226#M22987
For those of you who want to put .MP4 videos on a PS3 with a Macintosh, this is how you do it with ffmpegx.
VIDEO
- X264 Encoding
- framesize can be any
- framerate can be any
AUDIO
- any MP3 or AAC track
OPTIONS
- Use CABAC on
- Constant bitrate on
- Trellis on
- Decode with Quicktime (not always necessary but if your picture is out of sync with audio, try this)
- AVC level 3.0
This produces a good .MP4 file that the PS3 will happily play.
Can anyone help or point me in the right direction? if not can we figure it out on this thread? there are a lot of questions I find when I google this subject out there - so a lot of people would be happy to find the answer.
Olias Sunhillow

I have created files to play on PS3, and the secret is to use MPEG Streamclip. You can encode to whatever you want in MPEG2 or MPEG4, then open that bad boy in MPEG Streamclip:
If it's MPEG2, File > convert to TS
If it's MPEG4: File > Save As MP4
That's it. MPEG Streamclip doesn't re-encode so no quality loss. All it does is change the container. And PS3 is very picky about containers.
As for 5.1 audio, you can do this by encoding separate MPEG2 video and AC3 audio files like you normally would for a DVD. For hi-def MPEG2, use one of the Compressor presets for HD-DVD. Make sure they both have the same name ("xxx.m2v" and "xxx.ac3", for instance) and are in the same folder. Then open the video in MPEG Streamclip and it will automatically mux the streams together, which can then be converted to TS.
Note that this is only possible encoding video to MPEG2. I don't know of any way to create an MP4 with 5.1 audio.
PS3 is a great way to deliver HD video onto your TV without the frustration of trying to author Blu-Ray or even burning discs.

Similar Messages

Best Compressor settings for HD720 16:9 to cell phone OTHER than iPhone?

Hey there,
Does anyone know a good set of compressor settings for exporting HD720 16:9 29.97fps to a cell phone compatible format other than iPhone? Do most cell phones use an MPEG format? I guess I should start there. New to this one.
Thank you,
ed

There are different MPEG flavours and compression for DVD, mobiles or web often means creating some flavour of MPEG file. Even H.264 is an MPEG file. One of the most advanced.
Go to Compressor settings and look for a folder named Mobile devices then do a bit of your DIY (test, test, test).
G.

Settings for the relation of requirement type and planned order type

Dear Gurus
Where we maintain the settings for the relation of requirement type and planned order type?Actually I have maintained strategy 60 for a particular material (planning material) so the requirement type is vsev and along with that the planned order type is coming is vp i.e non convertible planned order.That is ok the system is behaving right.But nowhere I can find the setting of vp with vsev how the system is picking vp?
Regards
Sandip Sarkar

Hi!,
That is an inbuilt sytem setting and you can't change that.
Regards,
Uday

What Compressor Settings for the web?

I have a 1min40 sequence with the Settings: PAL, Frame Size: 1280x720, 25fps, Compressor HDV720p25. What Compressor Settings would you recommend please:
1) to put it in a website
2) for Broadcast: would Apple ProRes HQ be a good choice?
Thanks in advance.

You can review the information first hand at youtube.com
Or create a custom preset in Compressor:
Name: YouTube sharing
Description: H.264 video at 8 Mbps with AAC 44.1kHz audio
File Extension: mov
Estimated size: 3.6 GB/hour of source
Audio Encoder
AAC, Stereo (L R), 44.100 kHz
Video Encoder
Format: QT
Width and Height: Up to 1280 x 720
Pixel aspect ratio: Default
Crop: None
Padding: Preserve source aspect ratio
(L: 0, T: 0, R: 0, B: 0)
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 50
Min. Spatial quality: 50
Temporal quality: 50
Min. temporal quality: 50
Average data rate: 8 (Mbps)

Compressor settings for HDV 1080i50?

hi,
i have to export 1h30 of HDV 1080i50 to make it play on a dvd.
could you, please give me some suggestions how to make this?

ok...this is my first use of this kind of material and i don't know witch compressor settings i could use.is it possible to burn an HD DVD with my imac or i can use a SD DVD preserving a maximum quality? the answer will determinate the compressor settings i could use... for know i have tried,the last 4 days, to use H.264 so it can fit into a sd dvd (changing the average bit rate) but after more than 24h the encoding process is 1/4 of the entire video...and i've stopped it. i don't know if it's a normal to take soo much time or if i'm making a mistake doing it.so please, help

Best settings for h.264 export in HD

Hello, i have been reading a lot about h.264 in these forums and on the internet and im a bit stumped on how i should export my video. i shot it in 1080p 29.97 on a canon sx10 is. the file imports fine and exports no problems, but the ending quality is pretty bad. BTW im using FCE 4. first, the video in FCE looks great. i know it converts it to AIC and that part is high quality and fine. if i export it to a self contained movie, it crops it but it is still pretty high quality. my problem is i want to store the file and wont edit it again so i dont want a huge AIC file. i want the resultant file to be mp4 with h.264 and AAC audio. i dont care too much what the filesize is for the mp4 but no matter what i do i cant seem to get as good quality as the AIC, no matter the bit rate, or any other settings i change. can someone point me in the right direction as to what the highest quality output for h.264 would look like in FCE 4? thank you!

Here are some basics....
FMLE creates RTMP protocol streams that PCs and Macs watch with Flash players. iOS devices don't understand RTMP (Flash), only HLS delivery of 10 second chuncks of downloaded video playback. Both systems understand H.264 video, but iOS wants to see AAC audio not MP3.
You didn't state how you are live streaming, meaning what bandwidth delivery service you are using. Live streaming only via RTMP won't get you to successful iPad and iPhone HTTP Live Stream. On-demand delivery to iOS devices normally requires .mp4 video files to be hosted, which Macs and PCs also understand via RTMP delivery. But unless your delivery service can convert .f4v or .flv files to .mp4 on the fly there is no easy way to to get to iOS via the direct file output of FMLE as of today. Sometimes we upload live encoded project files to our www.Wistia.com account for PC, Mac and iOS delivery. This is a YouTube / Vimeo paid type hosting service for on-demand only.
Some commercial CDNs (Content Delivery Networks) today allow an inbound live RTMP into their system using FMLE. Then they re-mux that RTMP stream into HLS delivery for iOS. Some work well using the native MP3 audio codec (Internap), but most require FMLE to have the AAC audio codec installed from Main Concept for $200. Or people use Wirecast from Telestream which is $500 per license to be able to run two instances on that one license.
In my 15 years of being a big commercial webcaster here in Silcion Valley, I have yet to find the perfect simple and easy and affordable RTMP to HLS live and on-demand delivery system. We currently do it different ways with multiple providers depending on the job. More offerings are coming out now and we try them all as they come down the pike.
Harvey Louie
Event Compression Group

Setting hinting for H.264 MP4 files? Possible?

I want to stream H.264 MP4 files for my online media class. Before with QT files, I set the hinting so the video loads and plays immediately. With H.264 MP4 files, end users have to download the entire file before it plays back in the browser.
I searched under the various H.264 settings but have failed to discover where I can set the hinting/progressive download option.
Can anyone help me with this?

FAQ:Why has my question not been answered?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Best compressor settings for web videos shot on canon 7d?

Hello,
I've started shooting video on the Canon 7d. I usually compress my videos for youtube as MP4 at 300 Kbps. However my last video had a presenter with background music track added. When I did my first export to compressor without the music background all the audio of the presenter was perfect. When I added a soundtrack in the background the presenter's voice was distorted, sounding like a Dalek!
I got better results with less distortion when I re compressed the video as MP4 800 kbps. Can anyone please recommend better settings that would give much superior sound and picture with zero distortion?
Much appreciated.
thanks

Did you try using the YouTube preset?

Compression settings for H.264

Can anyone recommend some settings for making making H.264 video intended for delivery on the web at 640x380?
Thanks.

Heya Rick,
So I was looking at the H.264 settings in Compressor and it would seem as though the highest bitrate is 1500 kps so guess you can't do bit rate between 2000 and 2500 k/bits like another poster recommended by using Compressor for Apple Devices settings. Also there isn't much control over the audio of the h.264 file in Compressor whereas QT conversion from FCP allows you to select a mono audio file with a lower khz rate and render quality.
The difference between selecting stereo vs. mono will be the difference between 1/2 or twice the filesize for your audio file which will absolutely affect your total filesize but make little to no difference in your viewed file intended for web viewing. Take a look at a standalone Stereo track AAC 44.100 kHz 192 kbps that is 5 mins long and you're looking at about 5 MB file just for the audio!!! Cut that to mono and drop the frequency and bitrate and that 5 mb audio file will be about 1MB.
I have always used QT conversion from FCP and have only just now had the opportunity to look at the h.264 settings in Compressor and judging from initial impressions I would go with QT conversion from FCP.
For the video you mention I would just go with export using QT conversion from FCP. For video settings use automatic keyframes with an automatic datarate with quality set to Medium. Best quality multi-pass encode. For sound settings use Linear PCM Mono channel 32 khz rate and Faster Quality render setting. That should give you a nice, small file size that will look and sound good enough for sit down interview video between 3-5 mins. in length.
Also remember that the h.264 can be used with a Flash player instead of QT player so those without Quicktime can view the file without having to install the QT player. You can use something like the JW Player from http://LongTailvideo.com or simply change the extension of the compressed h.264 to .flv and use it with any Flash Player above 9.0
hth

Best compressor settings for HDV downconvert -- attention hanumang

Reposting this bit because it differs significantly from topic of thread where it appeared.
goal: the best possible HDV-DV downconvert using final cut studio (hitch: I have added problem of converting resulting film from PAL to NTSC)
previous method: the best luck I've had is Quicktime converting from HDV to 10-bit PAL SD and compressor converting that to NTSC DVDPRO50
Hanumang recommended using compressor for first conversion. My response:
What settings?
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't seem any better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
I would be most grateful for help in this matter. I've spent a few weeks on this. I just plod along, zombie-like, trying a few different things every day, hoping to hit the jackpot eventually. I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget, but eventually, once the film is finished and (hopefully) I have more money, I''d happily pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.
What compressor settings do you recommend?
The best workflow I've come up with is qucktime conversion from HDV PAL to SD 10-bit PAL, then compressor conversion from 10-bit Pal to DVDPR0 50 NTSC.
By coincidence I decided to try the initial conversion (HDV to 10-bit) this morning on compressor (but I didn't change the frame rate; i didn't know they were relavant for HD downconvert; I only been change them for the PAL-NTSC conversion).
At first glance, the compressor 10-bit conversion doesn't look better than the quicktime conversion (due to the frame rate settings?). I don't know for sure because I haven't sent it back to compressor for PAL-NTSC conversion and on to DVD SP.
One issue I'm worried about is the dimensions. quicktime's 768 x 576 (preserve aspect ratio checked; letterbox selected) was the only dimension setting that produced a film that looked right (on the dvd; it's squished in final cut). I don't see that option in compressor. I suppose I could type it in the frame size boxes.
Anyway, I would be most grateful for answers to these questions. I've spent a few weeks on this and am past the point of frustration. I just plod along, zombie-like, trying a few different things every day, dimly hoping to hit the jackpot eventually. Actually, I've been planning on trying to downconvert using my HDV/DV deck (print to tape in HDV; then change settings to downconvert and capture as DV). Would that help?
how do pro studios handle downconverting? What kind of hardware do they use? I'm an independent filmmaker, working on a small budget for the time being, but eventually, once the film is over and (hopefully) I have more money, I'll be willing to pay for a good pro conversion. Do you know what that costs? The film will be 80 minutes long.
thanks again for your help.

My bad, I was out in the afternoon and didn't get a chance to pick up on your reply to the last thread. Sorry to hear that your first attempt with Compressor was so disappointing.
Just so we're clear, you're using what exact versions of the software? FCP 5.1? Compressor 2? (For Compressor, in particular, 2.0 vs 2.1 vs 2.3 is important.) And, what are your sequence settings in FCP? Finally, we're to understand that you're actually working in PAL HDV? Or are you working in AIC?

Downgrade Compressor Settings for longer DVD

I work with very simple standard definition 4 x 3 aspect video and sometimes make DVD's Compressing with the various Stock DVD Compressor settings. I have never made a custom setting with Compressor. Now I would like to put a 200 minute video on a standard DVD (not dual density).
Can I modify a default setting like the 150 minute, and downgrade the quality enough so that the 200 min results would fit on a 4.6 gig DVD? (maybe room for a very simple menu.) Do I have to make a new setting from scratch, or could I modify and save, working from a default? Like I say, I have never made a compressor setting, so I could appreciate a sort of step-by-step.
Thank You
Richard Miller

Duplicate the DVD preset you want to use; it will show up in the custom presets in Compressor. Clcik on the new custom preset so it will show in the Inspector window and make any needed adjustments. Give it a name you'll remember then save it and apply it to the file you want to encode.
You can use one of the available online bit rate calculators to determine the best bit rate based on your program's duration: http://www.google.com/search?client=opera&rls=en&q=dvd+bit+rate+calculator&sourc eid=opera&ie=utf-8&oe=utf-8
-DH

Compressor settings for YouTube for 720p 12 minute 10GB project created in FCPX?

Hey All
Would anyone care to share some settings for compressor please?
I have a 720p 50fps 12 minute 10GB file created in FCPX that using "Publish to YouTube" settings in Compressor is still coming out at 721MB.
It will take me 4-5 hours to upload this to YouTube so need to make the file smaller and who knows how it will play once its up online.
Any suggestions of some other Compressor settings without using too much quality?
Thanks

shippo,
When you reference "50 fps", do you happen to know if that's fields per second or frames per second? Depending on the answer to that, you may or may not need to adjust that.
When it comes to file size, you have frame rate, frame size, compression type and data transfer rate affecting the final size.
As Russ and darby have suggested, data transfer rate is the main thing to experiment with (since you're publishing for Vimeo, the other setting are pretty much locked in).
I have found that when it comes to playing with the bit rate, a video with a 1280 by 720 frame size needs between 4,000 kilobits per second and 5,000 kilobits per second to maintian good image quality. While you might get good results at a lower rate, high contrast areas in the picture are very, very, very likely to show loss of image quality.
If you need to get your video up asap, start the upload late at night. As long as your internet connection doesn't drop out (knock on wood), you file will be uploaded by the morning.
Also, (for what it's worth) is there any place close by that has fast internet that you could use? If you have access to a computer lab at a local community college, a 1GB file will probably upload in minutes rather than hours.
-Warren

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

Settings for updating info structures of purchasing and inventory managemen

Hi Experts,
Infor structures of MM aren't updating in my system. Is there any indicator to be maintained in material and vendor master for updating these info structures? and kindly tell me the settings for this.
Thanks
Harmandeep

Plz some one help

Incoming Email Settings for the libraries in My Sites and Personal Sites

Hello Friends,
I'm currently working on SharePoint 2013 implementation where My Sites have been configured in a separate web application and personal sites are being stored under same web application.
Ex: My Site Host : http://mysite.abc.com
All Personal sites: http://mysite.abc.com/Personal/firstname_lastname
These are the challenges I'm facing...
1. I enabled Incoming Emails for one of the document library in My Site host but not receiving emails. (All settings are properly configured, document libraries in other sites (team sites) are getting emails.). I doubt the problem is only with my site template.
2. Incoming Email Settings are not appearing in "one Drive" document library in my personal site( which is "Documents" library in personal site). So I added Email event as stated here and here
and settings are started appearing, but I can enter only email address as other settings are not appearing. Here also I'm facing the same problem.
Kindly share ideas if any.
Thanks!!
Manjunath
-Manjunath

Hi,
It is encourage that you to use another library in another site template:
http://davecoleman146.com/2010/10/27/how-to-setup-mail-enabled-document-libraries-in-sharepoint-2010-part-4/
http://sharepointgeorge.com/2010/configuring-incoming-email-sharepoint-2010/
Please be notice: The e-mail drop folder setting is not available in automatic mode, because that mode automatically sets the e-mail drop folder to the folder that is specified by the SMTP service. (https://technet.microsoft.com/en-us/library/cc263260.aspx#section3)
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Playstation 3 compressor settings for h.264/mp4 and avchd and 5.1 audio

Similar Messages

Maybe you are looking for