"Please insert media for next copy" (auto)

This should be a simple request.
If I want to make 10 copies of a disc I would rather not have to wait for the disc to spin up and then hit "next"
I would like to just put the disc in and the rest be automated.
Thanks so much! I couldn't be happier with CS6!
Seth

As Stan said...
Create an ISO or folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)
Or... buy a dedicated and automated duplication machine... No... I don't have a brand/model, I only know that I have seen such mentioned

Similar Messages

How do you avoid the "Please insert media" message?

Is there a way to make Encore proceed with the next burn when I put the blank disk in? The "please insert next media" message will not go away on its own. I put the disk in, then I have to wait a half minute or so for the disk to load, then hit 'Enter.' Otherwise, the program will not proceed. Shouldn't the program (or the computer) sense that a disk has been inserted? Not a huge problem, but when I burn multiple copies with a single drive, it would be nice to just pop the next disk in and walk away to do something else.

As Stan said...
Create an ISO or folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)
Or... buy a dedicated and automated duplication machine... No... I don't have a brand/model, I only know that I have seen such mentioned

Nokia C3-01, suggestions for next S/W update

I am using Nokia C3-01 from 2 weeks. It is nice phone with touch and type combination. I would like to add some suggestions for next software update.
1. Brightness control
2. When writing a text message, tapping # change only alphabet from capital to lower case, but missing numeric. I have to press 3-4 times to write numeric in text. Also have no 'option' to insert numeric. If I change other language (not English, which is automatic), then I can get numeric by tapping #. Nokia, please care it for next firmware update.
Solved!
Go to Solution.

You can do a long press on the keys to get the numeric value instead of pressing it three to four times. This works for all Nokia since years, if they have keys
Or do a long press on the # key. This gives you the option to activate numeric input. Also a quite old feature for Nokia phones.

OSD - USB insert media #1 for the task sequence

Hi
I'm creating a standalone media for USB
Step that I did
1. Create a Standalone media to .iso files
2. Diskpart - I prepared the USB using the diskpart command
3. Extract the standalone.iso files in the USB (copy the contents)
everything is work fine, exempt the packages that I included in the stanadlone TS is NOT installed and asking for "insert media #1 for the task sequence"
This issue arise only when I used the USB
Content of T.S (stand alone task sequence)
a. Windows 7 and company standard application
b. Packages 1 : Install the 7Zip
c. Packages 2 : Install the update for the acrobat reader
I don't want to recreate the images due to minor changes and it will consume time also, that's why I added in the T.S place in USB
Please advise , what is wrong
Robert

Hi,
We also get the same problem, and at the time it occurs the USB stick does not show up in notepad, or in diskpart list disk.
It happens after the windows 7 image is apply just as it's trying to install the applications.

Using Windows 8 64 bit Premiere Elements 12 , motion tracker gives me the folloing error; The media file seems to have an invalid entry in the catalog, please rename it for use.

I'm trying to put a graphic over an object, but I keep getting this error message; The media file seems to have an invalid entry in the catalog, please rename it for use.

Lonesomeless
Thanks for the reply.
I checked the link that I posted back in post 3 of your thread. It is working with at least Firefox and Chrome.
ATR Premiere Elements Troubleshooting: PE12: Motion Tracking/What To Use To Track Object?
What browser are you using?
The blog post contains significant information related to Premiere Elements 12 Motion Tracking. But, if you cannot access it for some reason, then we will need to troubleshoot via communications in the thread.
SG has asked if you are able to create Motion Tracking effect using one of the graphics included with the program. We will watch for your response to him on that question. Please include in your message to him whether you can obtain your file to track the object using Organizer Tab or Project Assets routes as well as Graphics Tab.
The following is an excerpt from the blog post referenced....
SOLUTION
Various tutorials and online comments have pointed to places other than Graphics Tab where objects can be selected and used to track the moving object in the video when the Motion Tracking workspace is opened in the Expert or Quick workspace.
Organizer Tab, Expert or Quick workspace to access Elements Organizer 12. Cascade Windows and drag a video or photo from Elements Organizer into the yellow track box of Motion Tracking workspace.
Project Assets, Expert workspace. Drag text, video, or photos from opened Project Assets into the yellow track box of Motion Tracking workspace.
Graphics Tab, Expert or Quick workspace. Create a png file (graphic) or prtl file (text) and place it in Clip Arts in the Program Files of the program to have a permanent resource. Then from Graphics Tab, drag the newly created graphic or text object into yellow track box of Motion Tracking workspace.
Thanks.
ATR

Automatically upgrade any superseded versions of this application not auto installing - Status always waiting for next maintenance schedule

Hello,
I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs.
- The application is set to install to system whether the user is logged on or off.
- We do have user affinity, therefore the user does have a one or more primary devices setup.
- If I run the install manually, it will superseded and install the new application and uninstall the old applications.
- The estimated installtion time minutes is set to 0
- The maxmimum allowed run time is set to 120 minutes.
We're on version SCCM 2012 SP1.
My assumption of how it should work
If the user is logged in or NOT and it's during the maintenance window, it should auto install the application. Maybe I'm wrong.
Here's the scenario.
User JohnDoe has application Viewer 1.0 installed on his machine. He installed this app via the SCCM application catalog. We now need to deploy Viewer 2.0 of this application. I want to ensure when it's deployed it replaces Viewer 1.0 hence
the reason to check the "auto upgrade.."check box.
Here's what happens. In software center, it will pre-downlaod the software and then set the status to "Waiting for next maintenance schedule". The problem is that the status stays like this forever. We do have maintenance windows set
on the device collection that JohnDoe's primary device is part of. Here are our maintenance windows.
- Daily - 9PM to 5AM = 8 hours
- Weekly - Saturday - 12:00AM to 12:00 = 24 hours
- Weekly - Sunday - 12:00AM to 12:00 = 24 hours
Coordinated UTC is not checked.
The business hours in software center are set to 5am to 10pm.
One would assume that it would auto install during the night since we have a big maintenance windows. I checked the ServiceWindowmanager.log and it does seem to show the various maitnenance windows.
Here's what I've tried
- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
- If JohnDoe clicks install in Software center or application catalog, it works. There's nothing wrong with the packages. The issue seems to be related with the maintenance windows.
- If I disable the maintenance windows, then it seems to work but only when I'm logged in. It still does not work if I'm logged out. It only kicks off the installation when I login if it's not during the business hour set in software center.
We need the maintenance windows since we don't want windows patching to occur during the day.
- I searched and ran the report to ensure there's not another maintenance windows setup that would prevent this from installing.
Our current workaround
To ensure users are using the latest version, we deploy the application required for a couple of days, then delete that deployment once we reach a high 90%. The problem with that is if some computers are turned off, they would be using the older version
and it will never get upgraded unless the user installs it manually.
Has anyone encountered this? Any other log files I should look at? Anything else I should verify ? I know in SCCM 2012 R2, you can set the maintenance window to only apply this schedule to software update (patching) but that option doesn't seem
to be available in SCCM 2012 SP1.
Any help, suggestiong, I will take. Thanks.

- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
Re-check your deployment, specially the user experience:
If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
maintenance windows.

Workflow: Auto forward for next level for decision with object (RFQ)

Hi all,
I have the same requirement as the one in this post but for RFQ approval instead of PO
Workflow -Auto forward for next level for decision with object (PR)
I have tried deadline monitoring, but I need to capture the level in which the RFQ is in order to escalate.
Can someone let me know how to proceed further.
Regards,
nsp.

Hi Aamir,
As you said we have to use deadline monitoring here.
For this case use 'Requested Start'. From your i came to know this workitem should be a dialog workitem, so the workflow will wait for the time what you have specified in the requested start and when it is reached it places the workitem in the corresponding recipient inbox.
Regards
Balaji E.

Standalone USB 3.0 "insert media #1 for the tasksequence...

Hi,
I have multiple USB 3.0 sticks with the standalone tasksequence (windows 7) on that stop installing.
I can boot i WinPE and the stick is recognized (since I imported the USB drivers in winPE 4.0). So I can start the installation.
However, after the "apply OS image" step and after the "apply driver packages" step the system reboots in the new Windows 7 env to continue the TS but the USB stick is no longer recognized and i'm asked to insert media #1 ...
I have to remove the stick, and put it a second later back in the same USB port, then it gets recognized again and the installation can continue. I tried to resolve the problem by importing the USB3.0 drivers straight into the windows7 OS before my initial
capture... Same problem.
The drivers are there, the stick is just not recognized during the reboot... it only gets recognized when i remove, re-enter it.
This is a problem for years now, but since our new laptops no longer have USB2 ports, it gets a big pain...
Anybody an idea how to solve this ?
Thanks a lot !
Jeroen

Hi,
I suggest you ask this question in Windows 7 forum, you could get better support from there.
http://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to set value for Next Auto Restart for components

Hi All
When I checked my SPS13 portal in component monitoring area, I found that one of file server repository etc is not running. To get rid of the problem, we had to restart the portal.
On the same page there is a column for Next Auto Restart which was empty. Any idea where do we set it so that we do not have to restart entire portal for such kind of error.
Any help will be appreciated.
Regards
Prabhakar Lal

Quoting a mail by Akhilesh:
"Until EP6 SP2 you could have done this via
System Administration -> System Configuration -> Monitoring Configuration,
but this iView was deleted in SP3 and now this configuration needs to be done using the VA
In the VA navigate to Server -> Services -> Monitoring
In the Monitor Tree navigate to Root -> Applications -> KMC - > Repository Framework -> Components -> Repository Manager
You can set the "next auto restart" parameter for managers individually."
Regards, Karsten

HT6413 Please stop charging for iCloud from next month.

Please stop charging for iCloud from next month.

For details of downgrading please see:
http://support.apple.com/kb/ht4874
and scroll down to 'Downgrade your iCloud storage plan' for instructions for OSX, iOS, and Windows.

REF : 3980164565, 400164994 , Since i would be in india for next 1 year , please help me how do i get replaced the iPAD 3 here in India

Hi ,
I have brought the iPAD 3 from US Cuppertino with App+ and while transit from US to India i had some incidental damage , I have logged the support and they told me reach out to the Authorised Service provider , But the Authorised service provider wasnt able to help me in replacing this iPAD 3 . I would be in India for Training purpose for next 1 year and wanted Apple Customer Care help in replacing the iPAD 3 from the Authorised Service provider which is india , Please provide me suggestion or support in get replaced my iPAD .
<Edited by host>

Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are your fellow users.
You will have to work with the authorized service centers in India. Why did the service center you contacted say that they could not help you?
Regards.

When reopen Premier Pro CC, get message "missing media for these clips". I haven't moved files or anything. Please help.

When reopen a project in Premier Pro, I get the error message "missing media for these clips" and a listing of every file in the project.
When try to view, just get thumbnails with question marks.
What am I doing wrong?
Thanks

Is the media on an external drive?

HT3939 how to know the carrier for iphone 5 if its showing activation failed please insert a sim card

how to know the carrier of iphone 5 if its showing activation failed please insert a sim card and i don't know what sim card goes in it and if it is cdma or gsm.
i stuck on this step. i can't go further it just shows imei and meid number but iccid is displayed unknown. please help me to move further. thank u.

contact apple.

Adobe Premier Elements 7- crash-when burning says" Please insert a blank disk" and already a disk in

I have a Adobe Premier Elements 7. I have had a lot of problems with it of crashing and not burning.. I just had my computer wiped out and installed everything back on like windows xp service pack 3..etc. First I have Windows XP service pack 3 with an Intel Core 2CPU ,6400 @213GHz, 2.13 GHz, 1.98 GB of RAM. When I went into disk menus premier elements 7 crashes... why is that??? also I tried to burn a DVD and does the progress of burniing and almost done burning WHILE there is a dvd in the drive and says"Please insert a blank disk and click ok to burning" why doe sit do that also? I just had adobe reinstalled and my computer wiped out? Please respond and help.. I am using this program as a business of video editing and nee this solved.

Along with Steve's questions, let's talk about the process of Burning a DVD-Video.
From PrE, which is doing the authoring of the DVD-Video, the first thing that happens is a quick check of the Project and the Menu Set chosen. This happens in an instant. Next, the program must Transcode the Timeline to MPEG-2 that is fully DVD-compliant. This takes some time and is a very intensive process, stressing the computer, and also heating things up greatly. This process will often cause a poorly ventilated, or poorly cooled computer to crash with either a reboot, or a BSOD (Blue Screen of Death). Every component, save for the video card, will be stressed like few other programs can do. PrE uses a 2-pass Transcode, where it goes through the entire Timeline, and maps out sections with high motion, or great detail. It builds a "script" on how to proceed, and then goes back at the Timeline with that script, but also still looking for ways to improve things. This is about 90% of the entire Burn Disc process. Nothing has yet to be burned. Instead, files are created in the Scratch Disk folders. Now, the program takes those newly created MPEG-2 files, the Menus, and all navigation such as Markers, and assembles them into another working folder, in the full DVD structure of VIDEO_TS folder with the IFO, BUP and VOB's. When this is done, the actual physical Burn starts. This is quite a ways into the total process. It is at this point, that the program looks at the burner and the blank media, and not before.
When the program cannot get the necessary info from the burner, or the blank media, it will throw an error message, similar to yours. Also, "SenseCode Errors" usually indicate a problem with the burner, or the media.
Now, let's address this last bit. Is the firmware for your burner up to date? If not, update/flash the firmware. This will be available from your burner mfgr's. Web site. Next, what brand of blank media are you using? Verbatim and Taiyo Yuden are the most recommended brands. Memorex, TDK, newer Ritek and all store brands should be avoided at all costs. Last, is your burner a fully-certified multi-drive? If so, it should be able to handle +R, or -R media. What type are you using, and are you sure that this is blank media, and not a disc that you have already burned, or even attempted to burn?
Hope that we can stop the crashes, and get you to burning.
Good luck,
Hunt

Free version of CS2 - unable to install - please insert CD 2

I am running Win 7
I was pointed at a link for a free version of CS2.
http://www.free-stuff.co.uk/Free_Adobe_CS2_Creative_Suite_Download_Links.php
I assume it is a valid free offer. There is no indication at the Adobe site link.
There is a PDF that describes how to install and, although, the file names mentioned are not exactly the same as those that are downloaded they appear to correspond and everything downloaded correctly (there is a slight problem with the disk 3 link, with a superfluous backslash at the end but that is easy to get over).
I did as specified, i.e. run the disk 2,3 and extras files to expand the content then I ran the disk 1 file and everything appears to be ok until it gets to the stage of requiring disk 2 and doesn't find it.
Unfortunately, there is no opportunity to point it at the (correct location on the) hard drive (whether it is looking there or at the CD drive I don't know). So, essentially, I am stuck at a message saying "Please insert CD 2 to continue installation". Any ideas?

Installing CS2 on a Windows 8 64bit systems worked for me using the instructions below, followed to a "T".
"Be aware, this won't be for everyone. These are old programs, intended for use on Windows 2000/ XP and Mac OS X v.10.2.8–v.10.3.8 (PowerPC® G4 or G5 processor). We've managed to install CS2 on a 64-bit Windows 7 system, but this is unsupported and there's no telling what issues might crop up.
If you'd like just to try, though, here's what to do. Follow the download link to open a page at the Adobe site, and at a minimum download CreativeSuiteCS2Disc1.exe, CreativeSuiteCS2Disc2.exe and CreativeSuiteCS2Disc3.exe from the links at the top of the page (that's a bulky 1.07GB in total, so choose a system with a fast internet connection).
Run CreativeSuiteCS2Disc3.exe, make a note of the default extraction folder (it was C:\Creative Suite CS2 for us), and click Next > Finish.
Run CreativeSuiteCS2Disc2.exe, change the default extraction folder name to whatever it was for the previous file, and click Next > Finish.
Run CreativeSuiteCS2Disc1.exe. The extraction folder should be the same as it was for the Disc3 file, but change it if not, and click Next. (The aim of all this being that all the CS2 content should end up in the same folder.)
The installer will appear. Click Next and accept the licence agreement.
The "Personalization" screen then asks for your registration details. Enter your name, (optionally) company, and the serial number 1130-0412-8377-1896-9751-5759 (you can paste this from the clipboard).
Next, the installer asks where to install Creative Suite 2. By default this was C:\Program Files (x86)\Adobe on our Windows 7 x64 system, but it immediately complained that "The path your selected for installation contains unsupported characters". This is misleading; the real problem is just that the installer is using a long file name. Manually enter C:\Progra~1\Adobe as the folder name on 32-bit Windows, C:\Progra~2\Adobe on a 64-bit system, press Tab > Next and all should be well.
Read more: http://www.pcadvisor.co.uk/downloads/3328873/adobe-creative-suite-2/#ixzz2TI45RP5Z
You then get to choose to install some, or all of the suite's components. Your options are Adobe Illustrator CS2 (600MB), Adobe InDesign CS2 (400MB), Adobe Photoshop CS2 and Adobe ImageReady CS2 (450MB), and Adobe Version Cue CS2 (300MB).
We opted for the "Entire Suite" option, and clicked Next.
A Summary screen appears listing all the choices you've made so far. If there's a mistake, click "Back" and change it, otherwise click Install.
If a message appears telling you to "Insert CD 2 to continue installation", open Explorer, and switch to the default extraction folder (we'll assume it's C:\Creative Suite CS2). Manually copy the C:\Creative Suite CS2\Adobe InDesign CS2 and C:\Creative Suite CS2\Adobe Version Cue CS2 folders and their contents to C:\Creative Suite CS2\Adobe Creative Suite 2.0. Switch back to the installer, click OK and it should now continue.
Once installation is complete (which should only take 3 or 4 minutes, not the "up to 20" suggested by the setup program) a Registration dialog will appear. There's no need to bother registering, really - these are free tools, you're not going to get any support running them on modern PCs anyway - so the best option is probably to choose the "Do not register" option, and click Next > Done.
And with any luck, you should now have installed CS2. The issues may not end there, but you should at least now be able to launch and try out its various applications.
Read more: http://www.pcadvisor.co.uk/downloads/3328873/adobe-creative-suite-2/#ixzz2TI3v0aP3"

"Please insert media for next copy" (auto)

Similar Messages

Maybe you are looking for