PM issue,Equipment for repair externally.

Dear Experts,
My client need order for equipment which to be taken externally for repair.He needs goods movement of that equipment.Since it is a equipment,I cannot do movement.How to handle this scenario,please help.
Regards,
Rajesh.

hi
In standard if you want to service externally is create a order with external service control key ,whcih generates the PR .Convert the same in to PO and do the service entry sheet
In standard you cannot able to trace the equipment ,ie it is not possinble to send outside with reference to the equipment
regards
thyagarajan

Similar Messages

  • Process for sending equipment for Repair to the vendor

    Hi,
    My scenario is as below:
    1) Equipment is created without Material / Serial no.
    2) Equipment has to be sent for repair to the same vendor from whom it has been procured.
    Please let me know the standard process followed in this case. Need process for both indegeneous material and Imported material.
    Please check and suggest.
    Regards,
    Deepa

    deepa the process for sending equipment (material) to vendor in foreign country
    follow the below step
    Refurbishment order (standard order type PM04) and process it as an external service using Operations control key PM02. Here is the process
    1. Create Refurbishment order for the material
    2. Create operations (PM02) for external processing. PReq will be generated once the order is released
    3. Send out the material to vendor for repair
    4. GR/IR upon receipt of the material from vendor
    5. Receive material back to storeroom (IW8W)
    6. Order settlement to material

  • How to send Equipment for repair

    Hi,
    i want to send a machine or euipment for repairing.how to do it..iam having inventory and purchase,finance modules..pl provide solution
    regards,
    venkat

    You might need the service module other wise you have to create a custom solution with the existing modules.
    Srini C

  • Equipment for Repair

    Hi all,
    Store department issued the material to user department two years back. Now the, material needs to be repaired and send out of the factory with returnable Gate Pass.
    What is the process in SAP please.
    Thanks.

    Hi,
    1.     Material type u201CUNBW u2013 Non Valuatedu201D to be configured with only quantity updation.
    2.     Stock for materials received from any of the work centres for replacement / repairs to be taken into stock using MB1C 501 movement for the MMR created under UNBW material type.
    3.     A sub-contract Purchase Order is to be created specifying the GL account / Cost Centre to which the servicing charges are to be debited and the same material attached as component which is to be provided to the Sub-Contractor.
    4.     Issue of material to the Sub-contractor referring to the PO using MB1B movement type 541.
    5.     Create the out put for referring the Gate Pass Print out  to the above mentioned document (MB1B, movement type 541)
    6.     The Material leaves the Plant premises with the above mentioned Gate Pass and stock of the material moves out from u201CUnrestricted useu201D to u201CProvided to Vendor Stocku201D.
    7.     Receipt of goods after repairs - MIGO
    8.     Invoice verification for the Servicing charges u2013 MIRO (FINANCE)
    9.     Issue of material to the  respective cost center using MB1A , movement type u201C201u201D, there wonu2019t be any Accounting entry passed for this issue as the material involved is of Material type u201CUNBW u2013 Non Valuatedu201D

  • Equipment to be sent to contractor for repairs

    PM Gurus;
    In a scenario, I want to send equipment for repairs to contractor and also track the maintenance cost on 'maintenance order'.
    I am following the steps;
    1) For every equipment, one non valuated material is created in MM
    2) Maintenance order is created with the Equipment as reference object (so as to get desired reports)
    3) Material is tracked from MM reports, gives me the status of the repair
    4) When maintenance order is released, equipment inactive flag is set manually, so that it gives me warning/ error if I am creating order/ notification
    5) Once the equipment is back, equipment is set with active flag
    The above procedure is ok with my client as they don't have much of the equipments going out for repairs. But I think there should be some better way to map this in SAP.
    I am thinking of creating a single material in MM for all equipments & track them by material number + serial number, I am also aware that once the serial number is activated, can not be deactivated. But why there is so much of scare to use serial number management? Will this method be helpful?
    Can you pls. let me know how do I do it? Pls. let me know step by step.
    Thanks & Regards
    Hemant

    This is actually a good mapping u did. Especially given the fact that the number of equipments going out is not much. In the pre SAP era all that used to happen was a returnable gate pass and an entry in the materials clerk's register.
    But now with large volumes u can ensure that an appropriate movement type is created for vendor servicing. So in essence if ur outgoing equipments' numbers grow u can think about material code and the serial nos. Till then u can continue with the equipment code deactivation or even a user status instead of deactivation.

  • HT2458 Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

    Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

    You received incorrect information from AT&T.  You can indeed access your voicemail without your iPhone.
    Call AT&T at (800) 331-0500 (assuming you're in the U.S.).  This is a 24 hour a day, 7 day a week number.  Ask them how to access your voicemail.  Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password.  You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number.  Let the AT&T person tell you.

  • Has Anyone sent the iphone in for repair for the low volume issue ???

    I called apple last week and spoke with a level on support agent. After he could not solve the volume issue they sent me to level two. the level two tech took the call and told me right away that they were going to send me a new phone. I give him my credit card as a deposit so they would send a new phone and when I had the new phone I could then send the old one back. Well after a few days I called to check on the phone and found out he never placed the order and now they say they want to send it for repair some place in Texas. They did offer the rent me a phone for 29.00 while I wait for repair. I told them no rental for me. How bad is that, a hardware issue and they say they are going to send a new phone and never do then they offer a repair and to rent me a phone. I was wondering if anyone had sent in the phone for this issue yet. I do not think I am going to send it in and I think I am going to get my refund while I still can. I just thought I would check to see if anyone had sent the phone in for repair yet and how it worked out.
    Andrew

    How are any of us (Apple users just like you) supposed to have any idea?
    We weren't there.  We don't know the specifics of what happened to your iPhone.
    Ask the store that repaired it.

  • Certificate issue in jdevloper tool for calling external issue

    Hi
    while Invoking the external application wsdl in SCA as a web sevice i am getting error in Jdeveloper tolll as
    "Error while Reading wsdl file: https://abcd?wsdl
    WSDLException: FaultCode=PARSER_ERROR:Failed to read wsdl file at: https://abcd?wsdl
    caused by:javax.net.sslHandshakeException, :
    javax.net.sslHandshakeException:sun.security.validator.validatorException:No trusted certificate found"
    Is it the issue with Jdev tool ?. http url i am able to invoke not https.
    Where to configure certificate in jdeveloper tool for calling external service.
    Thank
    Neeraj

    extract the certificate for your https site and add this to your trusted store.
    if you are using the default trust, it should be located under WLSERV~1.3\server\lib\DemoTrust.jks.
    you can either use keytool or a tool like portecle for the same.

  • Material issues for equipment from already issued materials for FL(Func Loc

    Hi,
    At my client place, the working nature is 24x7. Store is closed by 3:00PM and no material is issued after that. So, Departments get issued materials for the Functional location at once and distribute(consump) materials for Equipments as per requirement under that Funcitonal location. Our client wants that when material is consumped for equipments it should be issued from functional location issued materials.
    E. g. : For the funtional location "SSSL-1000-DG" 50,000 litre oil has been issued. Now, for lubrication of Equipments under this Functional location, Oil should be issued(debited) from this functional location. suppose, 1000 litre has been consumped for "ABC" Equipmnets. So, balance Oil of Functional location will be 40,000 litre.
    Please help me.
    Dinesh.

    Hi Dinesh,
    Generally material/consumption booking is done thorugh warehouse only.
    Once you issue the material from warehouse against F.L. cost center it will get updated with that F.L only.
    If you want that material to be booked against equipment then you need to issue against equipment only.
    You can create another store at maintenance side. Or just take the material from store and on next day book against required equipment.
    Sundar

  • Mm issue:-how to deal with  gds sent for repairs and again issued for consm

    The main problem is that if something come for repairing it increase the stock for one period and decrease the R and M for that period. And when after 4 months when goods are received after repairing it disturbs the R and M expense in another period.  And this also disturbs the valuation of the material.
    Any one can suggest how to deal with the repairs done to materials without affecting the valuation price of  original material.
    my points is how everyone in india is dealing with goods sent for repairs outside their company.
    what all entries are generated from first receipt of goods in company till  good sent for consumption after received from vendor who repaired the goods.
    all a/c and mm entries

    what we have decided that we would have 2 valuation type
    1. sap-domestic :- normal stock
    2. sap-use/repair :- repaired items.
    All the goods should be received using sap-domestic valuation. from here goods are sent to shop floor. when ever repair is required goods are received in stock thru sap-use-repair at value zero and not moving price specific to sap-use/repair valuation.
    so till goods that require repair and that already repaired are kept in stock, they are kept at 2 different values one is zero and other is moving price specific to valuation type sap-use/repair.
    now goods are sent for repair at zero value but when these goods are received after repair then value of repair will affect the moving price of valution sap-use/rep.
    so this will solve our problem that goods should be received from shop floor to stock for repair at value zero.
    how can we achieve this that goods received from shop floor to stock for repair is received at zero value and not moving price specific to valuation sap-use/rep. where we will have do setting in this vaution type or wherever required.
    pls send some suggestions on it

  • How to send the part of a machinery for Repair

    Hi experts,
    My scenario is like this,
    I am purchasing a machinery called Galvanizing plant. So in my Asset master it is maintained as Galvanizing plant.
    But that Galvanizing plant having 1000 number of small small parts in it.(for example)
    If i want to send a spare part of a material from this Galvanizing plant, how do i send?
    I know if i am sending any part out side the factory for repair work i have to make service PO.
    In my case i have not defined the 1000 ancillary parts of the Galvanizing plant any where.
    How to define these parts of machinery ? ( it is not FHMI)
    Please advice me.
    Thanks & Regards
    Bala

    Dear,
    Without creating it as a material or equipment(it need not be an asset), you cannot do logistics transaction.
    Create a PM order with control key PM02(external processing) and issue the material to PM repair order. During PM order release, system will create PR for servicing the same.
    In above process there will not be any record ofm gate pass and ect as it is a piece of equipment.
    One more way is defining it as material and assignment the required component to BOM, then you create a subcontracting PO...you can have the correct data in logistics.
    Come back if you need more help

  • I was given the wrong macbook when I gave mine in for repair.  I want to complain.  Also, they wiped ALL my data off the hard drive.  I want to complain to someone in authority.  How?

    I am extremely disappointed and angry with Apple service.  I am a writer and booked three weeks in Spain so that I could finish my book.  On the second day my laptop cut out on me asI was working on it, so I took it to Goldenmack in Cadiz.  Not only was I given someone else's macbook when I went back to collect it, but then when I returned to the UK, the Apple shop in Brighton managed to delete ALL my data from the hard drive because I was unlucky enough to get a trainee on her first day.  I have since learned she should not have deleted my data without even running a diagnostic.  She told me she was going to 'restore' the drive.  I took this to mean she was going to restore my work.  But no!  She erased the lot.
    I complained and eventually was put in touch with a supervisor, who I was told  had authority to resolve the issue. She said she would get the shop to phone me.  That was ten days ago and I'm still waiting. 
    Ok so there's nothing I can do now to get back the three chapters of my book that I have lost and didn't back up, but the  hard drive on this laptop is still faulty.  I try to back up my work every time I use the machine but as soon as I attach an external drive, the whole thing shuts down. I can't use it any more as I can't risk losing any more work.    This laptop is only just over a year old and this is just not acceptable, especially since I have really looked after it. 
    This is an appalling service I have encountered from Apple, and I am not going to ignore it.  I have contacted the young chap whose laptop I was erroneously given, and the repair of which I paid for! (although I did eventually get a refund),  to ask him if he had been given mine as well.  He said he had been completely unaware that his laptop had been given to me and he is furious as he had loads of "sensitive material" on it."  I have no idea in whose hands my laptop has been either, or indeed what damage it sustained while it was supposed to be in for repair.

    Contact Apple Support:
    http://www.apple.com/support/contact/
    Apple - How to Contact Us:
    http://www.apple.com/contact/
    Be sure to refer to the repair ticket number.
    Sounds like a terrible mixup.
    Good luck & happy computing!

  • Took Macbook in for repair at a family shop. They switched computers on me!

    Hi guys,
    Just last week, I took my Macbook in for repairs at a family shop. The computer was actually purchased at this same shop about a year ago and I got it used, and for some reason it was running slow. They told me that it could be that I needed a software update, but that they will take a look at it. I informed them while they were resolving that issue, I would like to purchase an external hard drive, and if they can transfer my pictures, videos, and music to my external.
    A few days later, I did not receive a call from them, so I called and they told me that they needed more time. I called them again later that day, and they told me the same thing. I called them the next morning, and they said they still needed more time. At 6PM, they finally told me that it will be ready by 7PM.
    When I picked it up that evening, I noticed a few things.
    1) All my data on my internal hard drive was ERASED. I asked him where was my data, and he told me that I told someone that I wanted to transfer EVERYTHING from my internal to external. I said no, I just wanted some media backed up to the external, but not to wipe out my internal.
    2) It was not my computer! I noticed little things here and there and determined that it was not mine and they somehow provided me another one. The computer now has a different name to it and also a different password to which I do not know. My original computer also had scratches that I can easily recognize, and on this computer, it shows none.
    At this time, I am still holding on to this computer. It was my mistake for not obtaining the serial number before I I gave it to them for repair. The receipt when I purchased it does not also show the serial number. My question is....Is there a way for me to try and obtain the serial number? Maybe through my other Apple devices such as my iphone? I want to submit a police report, but I cannot justify this w/ out any proof. Your thoughts?
    Thank you!
    Jackson Dinh

    Have you ever taken it to an Apple Store (to the Genius Bar)? They would have records of your serial number, as well.
    Conversely, you can get the serial number from this computer, call Apple, and see if there was any history of repairs for it. That way, if they show any cases or repairs opened since you've owned your computer (and that you haven't done), you can easily tell that this was somebody else's.

  • Full HD backup before sending in for repair-software recommended/how-to?

    Hi all,
    I have to send my MacBook 2GHz Intel Core 2 Duo running 10.4.11 in for a warrantied repair to the CD/DVD drive (MATSHITA DVD-R UJ-857D). It just doesn't want to read discs anymore and has always been a bit finicky. There are a few other issues too like the finder crashing a lot. I've already had one logic board replacement on this machine and have been putting up with the finder issues as it is inconvenient to be without it for a week, but the optical drive issue has to be fixed....anyway...I digress....
    Can someone please advise me on what software would allow me to completely back up (clone???) my HD before I send it in for repair? I have a 160gb firewire 400 drive for the task.
    I'll probably need some help getting the data from the external to my MacBook when I get it back as well.
    Many thanks for any suggestions/help/detailed directions/the lot......
    rsh

    Look at Mac Backup - Mac Backup Software, Hardware, and Guides for Your Mac
    http://macs.about.com/od/usingyourmac/tp/backuphub.htm
    Mac OS X data backup FAQ http://www.macmaps.com/backup.html
    You can use CarbonCopy Cloner @ http://www.bombich.com/software/ccc.html , or SuperDuper @ http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html , or IBackup @ http://www.grapefruit.ch/iBackup/index.html , or Silverkeeper @ http://www.lacie.com/silverkeeper/ or the Restore function of Disk Utility included in OS X.
    External Firewire HDs are bootable, whereas an extrnal USB HD is not. After you receive your MacBook back, boot (depress the Option key at startup & select the external HD) to the external HD. Then clone the backup to your MB.
     Cheers, Tom

  • T400 - Video problems and a long wait for repair...

    Hi,
    I'd just like to state my experience with Lenovo Customer Support for a video problem with my T400.  Bottom line, as of today, it's been around 27 business days that it's been with Lenovo, and 41 days total since it's failed on me, and nobody, including Lenovo Customer Support, seems to know what its status is exactly, except that they're waiting on a part which has no ETA.
    In July 2009, I bought a T400, a 2764CTO version with the switchable graphics between the internal intel graphics and the ATI GPU.
    All was well until February 1st, 2010, when the LCD sudden wouldn't work.  Well, it would work, but the screen was very very dim, even with the display maxed out on brightness.  You would have literally bring your nose to the screen in order to even make out any text or images - definitely unusable.  However, if you hooked up an external monitor via the video output, the T400 would display video output properly that way.  When I did this, I noticed that the switchable graphics option wasn't there any more - couldn't switch to the ATI GPU.  Based on this, I figured it must be a video card or LCD issue, or a combination of both.
    So, I called Lenovo Customer Support (CS) at 1-800-565-3344, since I'm up here in Canada, and I initially was issued a case number of 41JRFSD, and I agreed to send it to a local Lenovo Repair Centre.  Oops, my bad, I made a mistake using the locator tool I was told to use at bplocator.lenovo.com, and thought the Centre was relatively close.  Not quite.  So, I called Lenovo CS again, and they issued me with a new case number, 40KWSYF, and said they'd send a box for return to depot.  And within 2 days, Feb 2nd or 3rd, I got a Purolator courier return box.  That's fast service!  Pleased, I put my T400 in according to instructions, and I sent it off.
    Fast forward to about mid-February.  I called Lenovo CS, and apparently there was a delay - the depot needed a part that wasn't in stock. Fine, I know these things can happen - I'll wait.
    Fast forward to March 1st.  I talk to a Lenovo CS rep, and it appears that the part needed has arrived, and they've put a rush order to get the computer back to me. Great!
    Fast forward to March 8th, still no computer.  I talk to another Lenovo CS rep... strange, there's no update.  The issue gets escalated to the Depot managers.
    Fast forward to March 12th.  Still no word on my T400's status.  An email fron CS has been sent to the depot.  Not even the CS reps know what's going on.  The rep I talk to figures there should be a response by the end of the day.
    Fast forward to today, March 13th, 4:50pm Pacific Time.  I just finish talking to Lenovo CS, there's been no response from the depot.  Apparently there's a part that they're waiting on for repairs, but there's no ETA on it.  Is it the same part that I've waiting on all this time?  Is it a new one?  I don't know. 
    At this point, I've been told to send an email explaining my situation, and I've also been told to talk to Scott the next time I call CS on Monday after 3pm Eastern.  I have to stress that the Lenovo Customer Support Reps I've talked to have all been very sympathetic and have been courteous, helpful, and professional - something I appreciate from having worked in Customer Support myself.  But the bottom line remains: my computer's not back to me.
    So, my questions to the community here: is my experience here typical?  Is there any hope of my seeing my computer back, or even at least just the hard drive?  I've used Lenovo computers for work for the past 7 years, and it was my good work experiences that led me to buying a Lenovo for home use.  However, it's been a while since I've been without my T400, and I was hoping to get my taxes done on the computer too, since they're due at the end of March.  I'll reserve judgement on Lenovo until I get my computer back, but at this point, all I can say is... I'm disappointed.
    If you're reading this, I'll let you judge my experience for youself.  I'll update my case as it progresses. 
    Thanks!
    Moderator edit: Removed support contact private information, per the Community Rules.

    Hi all,
    So, an update with some good news: my computer is finally back!  
    After a total of over 40 business days (just over 2 months) I finally have my T400 back at home, working again!
    According to the spec sheets, the repair depot had to replace: the systemboard/planar, display/LCD panel, LCD cable, PC card, bluetooth, and the inverter.  BIOS/Embedded controller was also updated, along with the regular diagnostics to ensure everything was working properly.
    I give Lenovo credit though: they got the final parts to repair the computer on Monday, April 5th, and shipped my computer back to me for the next day (today, April 6th).  That's fast service, once repaired!
    However, my case spans over 4 screens of updates and repair depot orders of parts.
    Also, it took me over 10 calls to Lenovo's Customer Service, plus an escalation to a higher-level manager after 1 month had passed, to get progress updates and ETAs for repair.
    Lenovo called me only once to give me an update, and that was the manager whom my issue was escalated to: all the other times, I called Lenovo for an update.
    The story doesn't end here, however:
    In talking to Customer Support, they told me that Sales might be able to sell me an extended warranty at a discount, given the issues I had.  And indeed, after talking to Sales, they offered me a 1 year warranty extension at a price of just over $100 CDN, plus tax.  This is a sale price, compared to the regular retail of $129.  Unfortunately, they can't sell me just one month.
    At this point, I refused their offer, and again escalated to a manager to request an extension of exactly 1 month on my existing warranty.  I figure 1 month delay in repairs, that's plausible - crap happens, and while most repairs take 5-10 business days, I can understand it can sometimes go higher.  Two months though....  My request for a warranty extension is being considered by the manager it was escalated to.
    So, one last question for you folks reading this: am I being unreasonable, talking to Lenovo support one more time to request a 1 month extension of my warranty, given the length of time it's taken for repairs?  I'll post the response Lenovo will give me tomorrow, as they've said they'll do.
    One thing for sure: Lenovo's response will definitely influence my choice of brand from whom to buy a new computer (and it will influence the choice of my friends who've heard my issues, and maybe yours too).  My particular repair problem may not come up often, but if it does happen to you, I'd be happy to know of your experience.
    Thanks for sticking with me through the drama!

Maybe you are looking for