Pmp Plan

hi
Im new to performance management and i have some doubts regarding PMP what is the difference in creating PMP based on
1 Organization hierarchy
2-Position hierarchy
3-Supervisor
4- Supervisor Assignment
And also is it possible to create a pmp with 2 appraisal process a year?
Thanks and Regards

If publish plan on
1 Organization hierarchy
===============
you have to select a Organisation hierarchy , It will publish to all employee of that Organization hierarchy .
2-Position hierarchy
============
you have to select a Position hierarchy
, It will publish to all employee of that Position hierarchy .
3-Supervisor
=======
This is based on Supervisor Hierarcy, select Top most Supervisor, Plan will publish to all empoyee belonging to Top supervisor and its subordinate till bottom of supervisor
Generally all requirement for Publish plan done by above three ways.
4- Supervisor Assignment
=================
We have not used. It will publish Plan for Supervisor Assignments Hierarchy.
This is possible to create a pmp with 2 appraisal process a year even more also.
And also is it possible to create a pmp with 2 appraisal process a year?

Similar Messages

Performance Management Plan - Customization

Hi
This is regarding the Performance Management Plan in Oracle Performance Management. Currently my client uses a custom concurrent program which creates appraisals by calculating the job anniversary date. The client is using yearly appraisal. But the program is scheduled to run every two weeks and picks the teammates who have completed their job anniversary in that period and creates appraisals for them.
There is no goal setting or tracking process implemented currently. The client is not using PMP now. I would like to propose PMP to the client. The PMP would create appraisals based on the hierarchy - Supervisor, supervisor Assgn, Position, Organization.
If a teammate is hired on 01-jan-2008 the first appraisal should be in 01-jan-2009 as per the client req now. If PMP is used it would create an appraisal in the year 2008 itself-- which is wrong as per the client requirement. Is there an option in PMP to exclude him in the current PMP and include in the next year's PMP?.
Thanks in advance
Regards
Ashish

Hi,
Using the PMP plan is ideal in case where the appraisal period is same across the organization. In organizations where the appraisal period differs depending on factors like hiredate, the PMP would be of a big maintenance. You will have to create PMP for each individual employee in the organization.
I suggest instead use objective assessment also in your appraisals and not use the PMP.
Thanks,

OPM : How to add appraisal data maintained in offline

In Oracle Performance Management, do we have provision for the PMP admin to add the appraisal details which are done for certain group of Employee in offline. DO we have any mass update of appraisal for certain employee group.
In Performance Management, can we have Appraiser other than employee supervisor during creation of the PMP plan is there any option to provide eligible criteria for selecting the Main Appraiser apart from Supervisor.
Thanks
Siva

Hi Siva,
I think there is no utility to create appraisals and update details from offline data for PMP.
Regards,
Vinayaka
Edited by: Vinayaka Prabhu on May 9, 2012 4:04 PM

Project Online Resource Plan issues_Many

I am trying to setup a client that only wants to use Project Server for portfolio planning and analysis. In this scenario they only want to assign generic resources (remember, no detail plans...only high level), and want to use the resource plan. Sounds
simple, but I am finding a lot of issues with this scenario, primarily with resources plan.
1. The resource plan seems to be checked out with no way to check it in other than through the force check-in. On occasion it seems to get checked in but I can't figure out the steps. I've tried with and without editing and publishing the
project itself with no avail. Sometimes the Publish option is still available (but I assume it wouldn't be if someone else checked it out) but sometimes it is greyed out.
2. I can't assign capacity to a generic resource and use it in Portfolio Analysis. This seems to be a feature that in my opinion was poorly conceived, but I'll leave out the details of this rant.
3. and biggest issue which is definitely a bug and show-stopper. Changing the date rage of an existing resource plan doesn't change the resource demand for a date range that was cut from the original. I can back the start date or extend the end date,
but cannot move the start date or end date in. What happens is that the grid changes just fine but the resource date range along with the demand for that time no longer in play still show up as project demand.
I added this to the Project Online forum but all of this behavior is the same with Project Server 2013. Nothing I could see in the forums. Is this a new bug or can there maybe be a fix on the way? Any comment or update would be greatly
appreciated.
Thanks...
Larry Christofaro, PMP, MCITP

msayani2 --
Firstly, all of your people and machines need to b entered in the Enterprise Resource Pool. For each of the machines you list, enter a Max. Units value that represents 100% multiplied by the number of machines you have. For example, if you have
three road graders, you would enter 300% in the Max. Units column for a Road Grader resource.
Next, you will need to build enterprise projects, add the required people and machines as team members in the project, assign the resources to each task as needed, and then save and publish each enterprise project.
To see how the workload is distributed for your resources, navigate to the Resource Center page and select the resources whose assignments and availability you want to study. At the right end of the Resources ribbon, click the Resource Availability
button. On the Resource Availability, select the time range you want to use and you can then see the availability of your selected resources. You can also click the Resource Assignments button to study how the resources are being used on tasks
across all projects in Project Server.
Hope this helps.
Dale A. Howard [MVP]

Updating task does not update project plan

In PWA, the following steps are taken
User updates their time in the task window for a task, than submits this task
The PM approves the time entry from approval center
The PM then opens the project from PWA or Project pro and the time that approved for this task is not showing up in the project plan
This happens in all projects
Project server is not configured with SEM
At queue jobs, Job state is "Skipped For Optimization" for status update jobs
Why is the project not recognizing the time entry?
Thank you.
Sincerely, Murad YAGLI, MBA PMP MCT MCPD:EAD MCITP MCSD .NET MCDBA MCAD, www.murady.com

I am running into this same issue with PWA 2013. I publish a task, have the resource update it via my tasks in PWA, then Open Pro and Check Progress. Pro redirects me to the Approvals page in PWA. I approve the task update, Pro pops several
message windows asking me to wait while the update is processed. The update processiong finishes and...
No progress indicated. No actual work indicated. I have tried opening the Working vs. Published version of the schedule. No difference. It appears to be something specific to this project schedule, as other schedules work just fine.
I have multiple resource assignments on the task in question. I've checked the assignmnet dates, updated task progress in PWA using various methods including work earlier than planned, as planned, work less than planned, anything to get Pro to reflect
the update. Pro rcognizes that there IS an update, indicated in the File / Backstag (Updates pending indicator) but it will not process them.
Personally I think the assignment level date in the DB is not being handled when accessed by PRO. All the data is right if you look in PWA.

MSS Dashboard for Performance Management - PMP vs Flexi-Form

Hello Experts,
I have the following problem in Performance Management.
We have decided to use PMP template for some employees (manager level) and Flexi-form for remaining employees (because we have pre-defined criteria in template that PMP UI is not showing).
I found that PMP dashboard in MSS is only showing PMP appraisals.
When manager opens Flex-form UI, it is showing all appraisals that the manager is responsible for (PMP & Flexi) and when the manager clicks on an employee's appraisal document link, it is always displaying the document in Flexi UI mode.
If a manager is having half of his employees using PMP and other half using Flexi-form, what is the best way for him to look at Dashboard (initial screen to open employee's appraisals), so that for PMP appraisals will open with PMP UI and Flexi appraisals will open with Flexi UI?
Thanks
Raghu Kolukuluri

>
Raghu Kolukuluri wrote:
> Hello Michael,
> It would be very very helpful, if you can find out how to do the setting, so that the quick criteria maintenance is defaulted to only include the templates you need on flexible.
>
> I talked to my Portal developers and the initial feedback that I got is that it is not a simple configuration, but it may be possible using a program.
>
> Any other ideas?
>
> One more question I have.
> What is the purpose of "Assessment" link under Talent Management? It never works for me.
>
> Thanks
> Raghu Kolukuluri
Hi Raghu,
So i was wrong about it being portal development, glad I finally figured out how to do it.
configuring the "quick criteria maintenance":
It can be done by config following this post: Define default value in POWL Quick Criteria Maintenance for all users
regarding assessment, it doesn't work for you, b/c you probably haven't done the configuration. go to talent management and talent development > talent assessment.
here you wil have to read all the IMG activities, the documentation is decent on how to implement. Basically with EP4, there are new types of assessment that a manager can do besides just performance, this includes assessing potential, risks, barriers, and development plans. all of these assessments processes tie into downstream talent management processes such as talent review meetings and succession planning. hope this helps.

Adding manual port mapping breaks NAT-PMP???

Hello,
I recently got an Airport Extreme simultaneous dual band N router. Recently I noticed some odd behavior related to NAT-PMP.
I turned on NAT-PMP in the Airport utility, and everything works fine (BTMM, other NAT-PMP aware apps). However, I added a manual port mapping for my SlingBox, because the AP does not have uPnP support. Once this manual port mapping is added, NAT-PMP breaks. Remove it, and it works again.
Anyone know if this is a bug in the firmware (running 7.4.1), and/or knows how to fix it?
Thanks!

Hi,
I'm getting the same problem. I, too, have a SlingBox, and I must manually have my SlingBox's port mapped. I also have manual port forwarding for iStat Server and for Transmission's web interface. Currently, when any of these manual port forwarding profiles are enabled/activated on my Airport Extreme base-station, NAT-PMP ceases to function at all (Transmission and SubEthaEdit both tell me they were unable to successfully map their respective ports). Is there any fix for this? If not, is Apple planning on releasing a firmware update for Airport Extremes fixing this problem? It's kinda ridiculous that an Airport Extreme can't handle manual and dynamic port forwarding concurrently.
Any help on this topic would be greatly appreciated. Thanks in advance for any help I receive!
Cheers,
Sasha

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Data Back Up Plan

Hi,
My internal hard drive, 320 GB, 'fully loaded', on my 2 year old imac crashed 10 days ago.
Since I had the extended warranty, the 'local' Apple store replaced the internal drive within hours
at no charge and even loaded Snow Leopard and iLife. With a well updated TimeMachine on an external hard drive I was back working at my imac the next day. When I realized after the crash that my precious 250 GB of pictures in Adobe Lightroom and iPhoto, along with a few videos were saved on just one older Maxtor external hard drive, it made me think about a more solid back up procedure.
The idea now is to move all big volume files to one or more external hard drives.
In the meantime I have transfered the iPhoto and Lightroom files to an external hard drive (WD MyBook II, 2x1 TB in RAID 1), which gives me the first layer of back up: http://www.bhphotovideo.com/c/product/552322-REG/WesternDigital_WDH2Q20000N_2TB_My_BookStudio.html
In a second step I am planning on making a clone (with SuperDuper or CarbonCopy) of the internal hard drive (mainly operating systems and applications) and the external hard drive (all big data files) on one additional external hard drive, i.e. OWC Mercury Elite AL Pro Raid 0, 2 TB http://eshop.macsales.com/item/Other%20World%20Computing/ME8Q7T20GB64/
I am looking for advise here:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
Would appreciate comments and advise.

reckling wrote:
Do SuperDuper or CarbonCopy (I only know the names from the discussion forums) allow me to make a clone from 2 separate hard drives
No. A clone is of your boot volume only. But those apps can make separate backups of multiple drives, either to multiple drives or to separate partitions on the same drive.
Would it be good practice to create a large clone of ultimately 2 TB with ALL files or wouldn't it be better to make 2 clones , one of the internal and one of the external drive.
2 is not only better, but your only option with CCC or SD.
TimeMachine had helped me to get back to work quickly after the crash. I expect to fill the WD 1TB drive rather quickly. Where should I plan on using Time Machine in my new back up plan?
There is no "right" answer, just a number of possibilities. Some thoughts:
You could use TIme Machine to back up both your internal HD and the WD set to the OWC, if it's at least twice the size of the data on both. It looks like it can be configured as a +Concatenated RAID set+ (both drives into a single 2 TB volume), so that should work well.
Or use TM to back up your OSX drive, and CCC or SD to back-up the media drive.
The CCC or SD backups usually aren't practical to run more than once a day, so consider them your "secondary" backups.
Also strongly consider getting something off-site (safe deposit box, workplace, relative's house, etc.), so you're also protected against fire, flood, theft, direct lightning strike on your power lines. Portable external HDs are great for that. Some things may even be appropriate to take to DVDs.
The problem with that is, there aren't many portables over about 640 GB (LaCie has a 1 TB for either $300 or $400: http://www.lacie.com/us/products/product.htm?pid=11357).
CCC is donationware, so you can use it free for a while. If you decide to keep it, send them some $$ so they can keep it up to date. SD has a free version, but to do updates (rather than a full replacement) or automatic scheduling, you need the paid version (about $30). Either is available via Google, VersionTracker.com, or MacUpdate.com.

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Pension plans in portal

Hi,
We have pension plans and the employees should be able to change the data anytime.
Open enrollment is for one month only and in that dental,medical,life plans are configured But only pension plans should exists for employees all time in portal.
Can anyone suggest me how to solve this issue
Thanks,
Usha

closed

Pension Plans

Hi,
We have pension plans.Our Customer requirement is that to change the pension plans by an employee at any time without any time restriction.
But the open enrollment option is for only 1 month in a year.
Can anyone suggest how I can solve this issue so that employee can only change pension plans at any time.
Thanks,
Usha

closed

Report for Planned vs Purchase Order(Qty and rate)

Hi
I have the following issue. My client is raising Purchasing requisition and Purchase Orders in Me51N and ME21n respectively. The Project Structure is used only to plan the quantities and rates whereas no PR is released from it. But the components are attached. Now if i make use of the code CN52N, i am getting the planned quantity and unit rate for the planned value whereas no Purchase requisition number or purchase order number is updated in it.
My requirement is that both planned quantity, rate along with Purchase order quantity and rate should be available in a report.
1. Is there any setting that we can make so that the details are updated in cn52N (or)
2. is there any other report with those details (or)
3. Should that be achived only through ABAP.
Please suggest.
Raghav

There are a few reports that you can use to display STO requisitions and orders, by supplying plant, material, or MD04 like was mentioned.
The only thing that you don't have in a report is the link to the production order. In SAP in a MTS situation there's no fixed link (pegging) between the requirement (STO) and the supply (prod Ord).
You can view the pegging dynamically, for example in MD04.
Edited by: Mario Adler on Oct 27, 2011 12:13 PM

A/P & Consignment data pull to Planning Cube.....

I put this in "BC & Extractors" section, but did not get any response.....
Need couple of clarifications (brief background is provided.....):
1. We do DELTA extractions using 0FI_AP_3 adn 0FI_AR_4 to a base cube which includes both 'Open' and 'Cleared'
items. From this cube we do a DELTA load to a Planning Cube on a DAILY basis. We filter the data on Company Code
and 'Item Status' (OnlyOPEN Items) for Planning purposes. The key figure pulled to Planning Cube is '0DEB_CRE_DC'.
The bsae cube has data at Line Item Document level, where as the planning cube is only at Customer & Vendor level.
The question is - Will this Daily DELTA to Planning cube with filter on Open Item bring correct key figure? For example,
if the status of one of the items pulled as OPEN in earlier Delta changes to "CLEARED" the subsequent day, will the Key
Figure reflect the changes and show correct value? Is there any impact on the key figure due to the filter on Open Item?
My thinking is the key figure 0DEB_DRE_DC will reflect he correct number (adjsuted) since it is a summated key figure.
I could be totally wrong and want to understand this with comments from experts.
2. Has anyone worked with pulling Consignment (SMI) data into Planning cube? We pull this data using a generic extractor
from a SAP table "RKWA" with some logic. Since I pull A/P data that contains SMI & Non-SMI transactions. To avoid
Double Counting, how can I avoid bringing in the SMI transactions from A/P? There is no flag to diffferentiate the SMI /
Non-SMI transactions....
I am hoping someone has worked in these area to offer expert comments/ recommendations.
Thanks.. Shaun
Please post one question only once
Edited by: Vikram Srivastava on Aug 13, 2010 1:02 PM

Hello Lee,
For your first question as you are using the Filter on the status of the record,
lets say today the status is OPen and as a part of the filter the Delta will be able to pick this record as the status is OPen but if the status is changed to Closed tomorrow then this record will be completely ignored and hence in the next level target you will not have the right status at all.
So you need to plan your filters accordingly.
Hope this helps.
Thanks
Murali

MRP - Auto creation of del schedule lines based on planned delivery time

Hi,
We have activated MRP (type PD) where Purchase requiesition is auto created by system for requirement quantity. We require to optimize delivery schedule in such a way that entire PR quantity is broken into various delivery schedule based on planned delivery time and requirement. Scenario can be further explained with following example.
Material Requirement for a month is say 1,25,000 units
Closing Stock say 25,000 units
PR Generated by system for 1,00,000 units. The entire quantity is schdulled with only one delivery schedule line as per planned delivery time.
The requirement is to generate multiple delivery schedule lines automatically in Purchase requisition based on planned delivery time so that Purchase orders can be placed with system generated delivery schedule lines.
How can it be achieved ?
Regards,
Nirav Kinkhabwala

Nirav,
This subject has been discussed repeatedly in this and other forums. I must assume that you overlooked the rules of engagement, which state that you should first search the forums and other public sites, before posting questions here.
Standard SAP MRP cannot be made to generate multiple items in a Purchase requisition. The functionality you seek is usually achieved when converting purchase reqs to Purchase orders, where many single purchase reqs can be adopted into a single Purchase order.
You also might want to investigate use of Vendor Scheduling agreements.
Best Regards,
DB49

Pmp Plan

Similar Messages

Maybe you are looking for