PO Item Interval issue

Hi SRM experts,
We are implementing classic scenario for SRM 5.0 and R/3 4.6C
We are facing the following issue with respect to PO created -
In SRM
1. We have defined the Number Ranges for Shopping Carts and Follow-on Documents in SPRO
2. We have defined the Number Ranges per Backend system for Follow-on Documents in SPRO
In R/3
1. We have defined the Number Ranges in SPRO
2. We have defined the Document Types in SPRO
For PO (ie Document Type EC) we have maintained Item Interval as 1.
Whenever a Shopping Cart is approved and PO gets created, the numbering is in intervals of 10.
Eg Shopping Cart 1 upon approval creates PO with number 10
The next PO for another Shopping Cart will be created with number 20 and so on.
Any pointers on this will be useful.
Kind Regards,
Amish

Corrections to the previous post -
Hi SRM experts,
We are implementing classic scenario for SRM 5.0 and R/3 4.6C
We are facing the following issue with respect to PO created -
In SRM
1. We have defined the Number Ranges for Shopping Carts and Follow-on Documents in SPRO
2. We have defined the Number Ranges per Backend system for Follow-on Documents in SPRO
In R/3
1. We have defined the Number Ranges in SPRO
2. We have defined the Document Types in SPRO
For PO (ie Document Type EC) we have maintained Item Interval as 1.
*Whenever a Shopping Cart is approved and PO gets created, the numbering of line items is in intervals of 10.*
*Eg Shopping Cart line item 1 gets created with number 10 and line item 2 gets created with number 20 and so on.*
*When a PO is created manually in R/3 however, the numbering of line items is in intervals of 1.*
Any pointers on this will be useful.
Kind Regards,
Amish

Similar Messages

EBP PO : Unable to duplicate/copy item,GR_NON_VAL issue

Hello,
I am using SRM 5.O .
In Process PO when I go to create the PO with more than one line item following issue comes :
When I entered one line item and check its ok when I click on Duplicate Selected Item or Copy push button than check following error appears .
Flag 'Automatic Settlement' at item level is different; Change not possible
Flag 'Invoice Expected' at item level is different; Change not possible 
Thanks ,
Sachin
null
null

Hello,
I have debugged whole program and found when there is single line item everything is fine & when i clicked on Duplicate Selected Item the value of GR_NON_VAL indicator set in first line item and second Items indicator as it is blank .Where single line Item indicator was blank .
When I am copying the line item than its working OK .
Due to mismatch in items followinng program raise error message .
PERFORM downward_inheritance USING p_hgp_ecom
 p_hgp_icom
 p_guid
 p_object_type
 p_itm_icom
 ls_igp_icom
 p_changed
 CHANGING ls_header.
Is there any idea why system behaving like this ?
Thanks,
Sachin

Item Category Issue

Dear Experts,
While i create packaging in Handling unit ther is a tab of Additional Data in Sales and distribution.In that we have Item Category - Issue is i am inputing manual item category TAN but i want to pick automatically.
I am unable to find the setting for packaging Item category of Sales and distribution.
Plz provide your inputs.
Thanks
Shri...

Apart from what Jignesh suggested, follow the following steps for automatic packing:
1 In the Shipping screen choose Pack/load - Pack delivery. You see the Change outbound delivery screen.
2 Enter the number of the delivery that you want to pack, or select one using the matchcode function
3 Press ENTER. You see the overview screen Change Outbound Delivery: Overview - Quantities.
4 Choose Edit, then Pack. You see the screen Pack Items
If you want to pack all delivery items that are not packed, choose Edit - Automatic packing.
In this function, you do not need to select any items individually. All items and shipping units of the selected delivery that are not packed are automatically placed at the disposal of the user exits for automatic packing.
If you only wish to have certain items in the delivery packed, choose Edit then Autom.pack items
With this function, you must select the items and shipping elements to be packed. Then, only the selected unpacked items are placed into an internal table.
If you have set the supplied example to active, the program automatically searches, in both procedures, for the respective shipping materials for the items to be packed.
Thanks & Regards
JP

Shopping Cart Line Item Interval

Hi Experts,
We are on SRM 7.0 SP05, By default shopping cart line item interval is 1,2,3,4.....etc,. My requirement is to have it as 10,20,30,40.....etc,
Is it possible to achieve this ?. If yes, please let me know how to do that.
Appreciate your help
BR,
Siva

number range not advisable stick with SAP rules.
even we are i classic po /pr LINE ITEM 10 ,20 SC W.R.T 1,2 ...ITEM.
concentrate some other customer developments and convince customers regarding this.
Muthu

Line item interval for SCs and POs

Is it possible to change line item numbers to start from 10, 20, ,,,,etc instead of 1,2,3,.. etc. for shopping carts and POs ? Is there a BADI involved or somewhere in config ? Where is the line item interval defined ?
In R/3, you can define the line item interval in the doc type config.
Thanks
-Bakulesh

Hi
Which SRM version are you using ? Why you want to do this ?
Any specific reasons/ requirments ?
We have similar requirment long time back, We tried a lots of things.. But no luck, I guess, it's not possible at all in SRM...
P.S. To confirm this, Please create a new OSS message with SAP asap, for faster processing of the query.
Do let me know.
Regards
- Atul

Vendor open item clearing issue

Hi sap gurus,
i have a very urgent issue that;
when we take the report fbl1n we see two open item for a spesific vendor;
1- 100 usd (debit)
2- 100 usd (credit)
however when we try to clear these two open items from t.code f-44 which clear each other the system says "no open item found"
i checked from table BSIK and see that there are two open item. fbl1n report shows two open item, but why i cannot clear it from f-44?
this is very interesting to me!
thx for your help.

i have solved the problem,
the open items were in payment list in F110.
we deleted payment list and the problem has been solved.

Sales Analysis on Item Delivery issue

Hi Experts,
I have another Issue regarding Deliveries at the same Client I posted this message on a few minutes ago:
"Delivery Document not closed even though Invoice is linked"
This issue relates to the Sales Analysis Report. When we open the Sales Analysis report on the Items Tab and select Monthly report, Delivery Notes, Individual Display and No Totals we get the report with 0 quantities for all the months selected even though there is deliveries for these items.
Any help will be appreciated.
Thanks,
Marli

Hi Marli,
Something must be wrong within the B1 database. You may need to restore the latest copy of the db to do more testing.
It might be a bug or human error.
Thanks,
Gordon

Open Item Management Issue

We have an issue with the BSIS table and open items management flag. Even without the GL account being flagged as Open item in FSS0, entries still show as open items in BSIS table. If you run FBL3n, the same account shows cleared with a green check mark and no red indicator. The problem is how to stop the BSIS showing this as open items and why its doing that way? Also, if you have any way of cleaning up BSIS so that only OIM managed accounts show and they clear automatically.
Can you provide a step by step procedure to fix this issue.
Thanks for your help

Hi,
   You do not understand the useage of the table BSIS. It is a secondary index for line items and not just an index for open items.
   For OIM accounts    BSIS = Not cleared, BSAS = Cleared.
   For Not OIM, but with Line item management = All items in BSIS.
Kind regards

GR of subcontracting items without issuing components

Hi all
I am facing a problem regarding subcontracting. In a PO of material X (item category L (subcontracting)) of required quantity 10, a component Y quantity 50 to make X is to be given to the vendor. The problem I am facing is that I am able to post GR of all material X without issuing any Y to the vendor. I should not be able to do this until all the component quantity (50) has been issued to the vendor. If I issue 5 Y then I should only be able to receive 1 X at max or not even 1 X. When I issue some quantity of Y it stays in subcontracting stock as seen by transaction ME2O.
How to settle this stock with subcontractor and what should be done to not be able to MIGO all 10 X until 50 Y has been issued to vendor or or to be able to do it proportionally ?
Also fine tune my concepts in this regard.
Thnx

Yes receiving is a physical activity not a computer activity but what I want to say is that even if X is physically received, the user should not be able to MIGO it if the components issued (subcontractor stock) is not settled. When I MIGO the received items and enter 0 quantity for the issued component the system lets it be. Instead the system should issue an error implying that all components have not been issued to vendor, so you can not receive X until you have issued all Y.
Try to understand my point. I know physically the vendor will send the product only when he has received all components from us but on the system, I am able to receive all X without even issuing a single Y. This is important for me because if some receiver does this without settling the subcontractor stock, it will become an odd case because the movement type 543 which does this component settling is not selectable. It is automatic for subcontracting component line item. Kindly test this scenario on your system. Make a subcontracting PO, do not issue a single component to vendor and then MIGO this PO it with 0 component quantity. I am able to post the GR which i should not be able to because the shipper has not issued a component and the receiver is able to receive on the system. I just want the system to not receive until all the components have been shipped.

Open item managemen issue

Hi Team,
I have an issue with open item mgt,
My user without information he was removed the check box and he posted transaction in local ledger after that he was try to reconcile the bank reco. Here he realised then once again he made that account balance as zero then he selected that open item management check box.
Problem is in between without open item mgt he ws posted around 200 line items for this g/l account. He wants to clear all line items but system is not showing the above 200 line items in F-03.
Is it possible to clear that line items or wee need to ignore.
Kindly let me know the details.
Regards,
Nauma,

Hi Nauma,
It's not possible to clear the items of the old account for which the open item management it wasn't checked.
So the standard procedure is to create another account and transfer the balance from the old to the new account.
The 200 items of the old account can't be cleared so you ignore them
Regards.

PO line item locking issue

Hi,
Does anyone had this issue before?
In ECC5, we lock the PO line item using FM ENQUEUE_EMEKKOE, but SAP still lets you create/confirm Transfer Orders for Inbound delivery, however, the same FM is not allowing you to create/confirm TO's in ECC6.

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Exchange "Sent Items" Missing issue in Mail

I lost my "Sent Items" mails and sync. I have looked all over this place and found nothing, but this one worked for me, I`ve taken the idea from here (https://discussions.apple.com/thread/4173886?start=0&tstart=0) similiar to Calendar issue
Open Mail
Go to the Mail > Preferences.
Select the Accounts tab.
Remove the Exchange server account which is giving you the error messages. This mailbox will be removed from the Mail app.
Close Mail (cmd + Q)
Go to System Preferences and click on the "Mail, Contacts & Calendars" pane, find your Exchange server account, and check the "Mail" option to re-enable your Mail (I`ve got an "unknown problem" when activating, the last resort I tried was to close current session - and retrying this step - it worked for me this way)
Your Mail should now sync properly.
Hope it works for you

on step 5) before clicking "Mail", it`s necessary to click on "details" (on the right corner) to input your password

PO item change issue

Hi all,
We went live on SAP last month. We are facing below issue in production -
IDOC is not getting triggered for output type when a PO is changed. we want to replicate the same issue in development system.
When I looked into production PO changes, I found that PO item is changed for ' Purchasing Document Item Change Date'.
When I see the item changes, it shows:
short text - Purchasing Document Item Change Date
Action - changed,
new value - 11/05/2010 (this is the date when PO is changed)
old value - 11/02/2010 (this is the date when PO is created)
Name - XXX_BATCH
Change doc object - EINKBELEG
table name - EKPO
field - AEDAT
Can anybody help me understand what is this change all about? and how can I replicate this issue in development system ?
Regards,
Pat.

please read OSS note 456127 - FAQ: Electronic Data Interchange (EDI) in purchasing

Image in item renderer issue for List Components

Hello,
I have an issue when I use an item renderer with an image in
it. This happens when I do this with a List or TileList component
that has enough items to create a scroll bar. What happens is the
images load fine, then I scroll down and the other items and their
images start appearing, but then the first and last images start
loading the wrong image. I'll scroll back up and the first item now
has a different image, and when I scroll back down, the last images
changes too.
Has anyone had this problem with image itemrenderers in List
components?
Thanks for any help.
Brade

The creationComplete event is called ONCE and that's it. But
each time an itemRenderer is recycled it will have its data
property reset with new a new record from the dataProvider. Thus
overriding the set data function lets you inspect the data and do
what you want with it.
Data binding in MXML <mx:Image source="{data.image}" />
is set up by the Flex compiler. When the data property is reset it
will trigger the data binding notifications. The Flex
compiler-generated code will intercept that and update the Image
source property.
If you use MXML, then use data binding. If you write your
itemRenderer in ActionScript, override the set data
function.

Image item renderer issue

Hi all,
Yesterday I found a soultion to display my image in my datagrid column. Now the issue is that if i leave the screen and come back to my screen the images move one space like the row index is adding one count, it's not validating my if statement.
Any ideas?
Thanks
Johnny
<mx:DataGridColumn headerText="LOCK" dataField="ISLOCKED" width="40">
 <mx:itemRenderer>
 <mx:Component>
 <mx:HBox horizontalAlign="center">
 <mx:Script>
 <![CDATA[
 import mx.core.BitmapAsset;
 [Embed(source="assets/images/lock.png")]
 [Bindable]
 public var lockImage:Class;
 private function checkLocked():void{
 if (data.ISLOCKED == 1){
 var asset:BitmapAsset = new lockImage() as BitmapAsset;
 img.source = asset;
 addChild(img);
 }else{
 img.source = "";
 addChild(img);
 ]]>
 </mx:Script>
 <mx:Image id="img" creationComplete="checkLocked()" />
 </mx:HBox>
 </mx:Component>
 </mx:itemRenderer>
</mx:DataGridColumn>

Renderers get recycled. CreationComplete is rarely the event to use. See
the item renderers posts on my blog
Alex Harui
Flex SDK Team
Adobe System, Inc.
http://blogs.adobe.com/aharui

PO Item Interval issue

Similar Messages

Maybe you are looking for