PO Price update at Header Level

Hi Friends,
Our PO Price "Update" button at header was grayed out and only able to do at item level??
Actually we have a "Post dated" PO and the tax rate was changed now. So, we need to update the tax rate. To update at item level for each and every item is cumbusome.
Is there any way to update at header level. Or is there any way to update in MASS??
Or is there any program available to carry out pricing for a bunch of PO's??
Any valuable reply will be appreciated.
Regards,
Dev

Hi,
Since the condition type which you are using for taxes are configured to be entered at item level and changes can be made only at item level.
If you want to update it at header level and the condition type is applicable for all the line item in PO, please change in configuartion so that u can make changes at header level.
Path SPRO-> MM->Purchasing-> Conditions-> Define price determination process->Define conditon types . For particular condition type which u want to make changes at header level. Thr is a option changes which can be made. Click on check box for header condition.
Please see that it is config changes and it will get updated wherever this condition type is used.
Reply if u have any issues still.
Thanks,
Ravi

Similar Messages

Split valuated material price change at header level (without val. Type)

Hi All,
Need to change Split valuated Material Price at Header level (without val. type).
In MR21 valuation type is mandetory for split valuated material.
Please suggest on changing Material price without val. type.
Thanks

You have to advise the users who create accounting views to enter a valid price when they create a material master. Maybe you need to make use of the user exit to prevent saving when no price (or a dummy 0,01) is entered.
It is not possible to change the header price with any SAP given transaction, as it could cause inconsistencies if you dont take care about the stocks at valuation type level.
you may have to deveope an own report on own risk. I personally have the opinion that it is more secure to post stock and reverse it again (which just creates to accounting documents that equalize each other, no remaining value anywhere) than going the risk with an own program to screw up the valuation of a material in general

Transfer Order Confirmation not updated in Header level (Table: LTAK)

Hi,
We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
It will be a great help if anyone have solution to these issues.
Thanks & Regards,
Nagarjun

Hi Nagarjun,
do you have any Z code in-between ? Did you check OSS notes ? Did you apply all patches to your system ?
What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
Many thanks,
Enrico

FM for Price Family price update at child level

Hi All,
Currently we are using RV_Condition_Copy for updating the price of the family. The problem with this is its not updating the child articles as per the Relationship maintained in the Price Family. It is explicitly updating the price which is maintained in the upload file. Let me know if there is any other FM which will take care of this...
Thanks in Advance.

Hi Sriram,
Can you please check the Price Change Allowed Field in the price family in Control Data.
If it's either "Blank" or "1" change that to "2" - Price Changed Allowed for Family Group and articles and then try updating the price of the family.
Hope it helps
Thanks,
Aram.

Price at header level then how to do billing

Dear All,
i have one scenario where the price is at header level.
and for that reasoni have made the item catagory is not price relevant other wise it will ask price per each line item.
now i faced the probel during the tiem of delivery
after PGI when i am doing the billingby selecting the delivery document number error is comning that item is not billing relevant.
so how can i do the billing.
even i have tried with order related billing but then also its giving error as the same.
so what is the bset possible way for this scenario.
where we are having price at header and stock at the item level then how to do the billing.
what will be the configuration steps.
with hope and
Regards
Subrat

Dear Raj,
when ever i am givinbg price at header it is multiplying it self with the number of line item. so if we need to put any price we have to calculate it manually per unit price then we have to put the price in this . so its really giving a pain to us if the amount will be divided amonge the line item rather multiplying it self then it will be a solution for the issue.
like if i m puting 1000 in the header its multiplying to 10 line item and the header price is coming as 10000. but we need to put amount as 10000 and it should divide it self with 10 item and per item it should come as 1000 rupees just the reverse what it coming now
thanks for all ur support till now.
with hope
regards
Subrat

Manual override option for Unit selling price in Order line level.

In OM R-12
Our client wants manual override option for Unit selling price in Order line level.
But there is no solution available to fulfill this requirment. To be able to manually override the price on a Sales Order line you
must have defined a manual modifier that qualifies for the Sales Order line in question. Without a suitable manual modifier the price cannot be changed.
This is current standard functionality.
Anybody can give some suggestion/workaround to override selling price in Order header level without using the modifiers.
regards,

Hi Kashif,
I'm finding it little difficult to buy Oracle Support's feedback with regards to R12 functionality for direct List Price update without using any modifier (manual or whatever). After all it is Oracle's product and they should know better. But test results in Solution Beacon's Vision 12.0.6 instance (http://www.solutionbeacon.com/tools_r12vision.htm) and documentation updates in R12 (R12.0.4) OM user guide & implementation manuals potray a different picture.
After your last post, I did a test in Solution Beacon's Vision 12.0.6 instance with following details:
OM: List Price Override Privilege = "Unlimited Access" at user level
OM: Discounting Privileges = "None" at user level
No manual modifiers defined and Order status = "Entered"
I could display the "List Price" field from folder under Line Items >> Main tab, override the list price to a new value and save. The unit selling price showed the new value based on updated List Price as soon as I tabbed out of the list price field after overriding. After saving it showed the new selling price. _Please note that under Line Items >> Pricing tab there is another "List Price" field and that is not editable_. For such overrides "View Adjustments" (from Line >> Actions) will not show any adjustment details as it is a direct update of list price.
Also please note that, if "Enforce List Price" checkbox is selected for the order type, the list price cannot be overridden even if the profile option is set to "Unlimited Access".
Document References:
Oracle® Order Management User's Guide
Release 12, Part No. B28099-03, September 2007 >> R12.0.4
Page No. 10-74
+Note: Note: If any order line for an order has the Calculate Price Flag value equal to Partial Price or Freeze Price new order level adjustments will not be applied or allowed to be overridden. _The profile option OM: List Price Override Privilege controls your ability to override the unit list price. If you have this profile set to Unlimited, you may modify the unit list price by editing the current value displayed_. The original list price is saved in a hidden folder field, so you can display it if necessary+.
Page No. 10-94
User Procedures
_A new profile option, OM: List Price Override Privilege controls whether or not you can update the List Price_. It is enabled and updated at the application, responsibility and user level. It is not user visible and updatable. The values include+:
- View Only: This is the default value. If set to this value, the current behavior is retained, which means unit list price field is protected.
- Unlimited Privilege: If set to this value, you can override the unit list price field from the main tab and immediately see selling price adjusted accordingly.
To use Override List Price:
+1. Navigate to the Sales Orders/Quick Sales Orders window.+
+2. Enter the header and line information, including the ordered item and quantity, then tab to the next field. The Selling Price and List Price display+.
+3. If the profile is set to Unlimited Privilege, you can enter a new list price in the List Price field. You can either proceed to the next line or save your work+.
+4. You can see the new, entered list price, and if there are automatic discounts applied, they will be based on the new list price+.
+5. If the folder has been modified to show the Original List Price, the original list price displays+.
+6. To change the List Price again, go to the list price field and enter a new value, replacing a previously entered value. If Audit Trail is enabled for List Price and a reason is required, a window appears to enter a reason and optional comments+.
Note: Subsequent overrides of the List Price, after the order line is saved, can be captured by Audit Trail, depending on the setup of Audit Trail (entered or booked state) and any processing constraints that have been set up.
In the OM Implementation Manual also there are notes related to this.
OM Implementation Manual
Release 12, Part No. B25975-03, September 2007 >> R12.0.4
You can refer to page no. 2-59, C-4 etc.
Thanks
Supro

Pricing is not changed when pricing date is changed at header level.

Dear Gurus,
The query is about pricing. When I change the pricing date at header level it is supposed to chnage the pricing at item level also. But it is not happening. In our scenatio there is a ZPR0 price and there is a condition record for that.
The order was created earlier and now when we change the pricing date price is not being changed. I checked the analysis button. There it shows the following messages for ZPR0(In this case condition already exists). ZPR0 has three condition tables
1. Condition record exists, but has not been set (for the 1st table in acces sequence)
2. Access has not been executed due to previous access(for the 2nd table in acces sequence)
3. Access has not been executed due to previous access(for the 3rd table in acces sequence)
As a result we are not able to change price in the header level by changing the pricing date.
Please help
Thanks in advance,
Je

Hi Felipe,
The pricing will change if we click on the update button and select 'C' or 'B' option in the item level. But when we try to chnage by clicking on the update button in the header level it is not getting changed.
I would also like to add that customer wants the price to be changed without pressing the update button at tghe header level.
Please clarify on the pricing validity configuration . What steps are required in the pricing validity configuration.?
Thanking you,
Je
Edited by: jerryabap on Feb 4, 2011 12:17 PM

MIRO price variance at document level

Hi all,
Normally the MIRO price variance PP will be applicable for this company code and item level of the purchase order.
it is possible to control the PP Document no level instead of po item level?..
any possiblities in standard..

Hi Palanisamy,
As far as I know this is the only way the system works because we all know that each line item has its own quantity, material type, net price, conditions... If the system process the price differences at header level, how does it know how to allocate the whole amount of difference to what stock account, and should be based on what criterion?
So, in short, I think that the way the system works at the moments is totally reasonable.
Best,

AP:GL date stored at invoice header level-11i

In 11i, the GL date is stored at the invoice header level rather
than being a system default field. Once entered and saved, can
the GL date be modified at the invoice header level? Does the
header level GL date automatically get updated when someone adds
or adjust one of the distribution lines, and uses a GL date
different from the original date? Or does the user have to
update the header level GL date manually?

Hi,
While entering the invoice you can change the liability account on invoice header, if the filed is not displayed check in folder options (folder->show Field->Liability Account)
Thanks,
Vijay

PGI status at delivery header level has not updated

Dear Friends,
We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
I think there might be some table which was not update. Is there any way to update the status in the delivery?
Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
Please suggest me how should I complete this.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Discount value not updating at contract header level

Dear Friends
I am facing problem of updating discount value at contract header level. The scenario is u2026. my client used to provide certain service to their customer. For that they maintain quantity contract & bill them as per billing plan. When customer avail three or more services they get 10% extra discount. Now the problem is after continue for some days if some customer wants to drop one item we are cancelling the line item by assigning proper cancellation procedure but the system is not reversing the 10% discount.
Example u2013
Contract valid for 1st Jan 2009 to 31st Dec 2010(Value for each service = 10)
(Total no of item-3)
(Discount-10%)
Here bill value for each month is 10x3-(30x0.10) =27
At the month of march 2009 customer decided to drop for one item so hence forth the bill value should be 10x2=20
But the system is calculating 10x2-(20x0.10)=18
We need to update the value at contract header level only to satisfy some CRM functionality.
Please suggest how to solve this issue

Hi,
If that is item condition then you can not change it at header level
check in M/06 make it at header level in change which can be made tab
Regards
Kailas Ugale

PO: Condition type maintained in header level affect the price per unit

Hi,
When I create a PO (Tcode ME21N) with 2 line items:
Line Item 1: $5.00 per unit, order 1 unit
Line Item 2: $10.00 per unit, order 1 unit
Then I put a condition type: Transportation Charges of $10.00 at header level.
The system will auto calculate and proportionate the transportation charges into that 2 line items. So now, the price per unit of the 2 line items has been change:
Based on the formula [ (original price per unit * Transportation Charges / total order value) + original price per unit ]:
Line Item 1: $8.33 per unit [ ($5.00 * $10.00 / $15.00) + $5.00 ]
Line Item 2: $16.67 per unit [ ($10.00 * $10.00 / $15.00) + $10.00 ]
There are 2 things here that we want to do:
1. We donu2019t want the transportation charges affect the price per unit. Means we do not want the price per unit to be changed. We want the transportation charges stand alone on it owns.
2. Also, sometimes the transportation charges is paid to a different supplier, meaning the original order value paid to supplier A, and the transportation charges paid to the supplier B (which is a transportation company).
Can anyone advise how can I do this?
Thank you.

hai;
give the transportation charges in item level
go to 'item details' tab and select individual item ,go to condition ,maintain the 'frb1' value seperatly for the two items in the PO.You can also assign seperate transportation vendor for items sepertly.
For selecting the transportation vendor ;you just select the line where you maintained the frieght value and click on the 'condition detail' button shown in the bottom of the screen then on next screen there is an option for giving the transportation vendor acccount no.
try
hope this will help you
by fasal

Net price is zero in Header Level

Hello Experts,
I am a newbie in SAP and I have a problem wherein on item level there the net price can be seen however when you view the net price in Header, cumulative net price is = 0. any help will be greatly appreciated. Thanks in advance.

hi..
check your condition types...in M/06...and then see whether u have ticked the item condition or header condition..
if u have ticked on header condtion then,,,this condition type will be used at header level in pricing,,,and at the level of document it will ask for price...
try this out..
thanks

Shipment confirmation IDOC interface : update fright condition header level

iam using the following IDOC type to update the shipment qty and post the PGI on outbound delivery note.
Message type :: WHSCON
Process code : IDOC_INPUT_DELVRY
I will get a freight charge on IDOC but SAP does not provide any standard segment and code to update or inset the fright on the delivery.
Can you please help me to identity what is the best way to insert the fright condition from IDOC to delivery condition ? any function module available for this?
also i need to split the delivery bases on the number of items shipped , any unshipped items goes to new delivery.
it would be grateful if anyone can provide sample code?

any one can pls provide me .how to update the delivery with fright charge at header level? is there any FM or BAPI to do so?

Update UDF on the header level

I have created two UDF's on a marketing document on the header(Title Level). I have created two different formatted searches such that on the first UDF after adding data it fills relevant data on the second UDF. However this is not happening unless i manually press shift+F2 on the second field thereby updating the data even when the first UDF data changes and I have set the option of refresh regularly.
Kindly advice.

Hi,
The problem is with the 2nd FMS.
If you want to automatically reference a header level UDF in your FMS then you can enter the table name for the form you are in. For example, if this formatted search runs on the Sales Order screen then:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $\[ORDR.U_TrpCode\]
Alternatively if it is an A/R Invoice screen then:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $\[OINV.U_TrpCode\]
Otherwise you have to manually press Shift F2 as you currently do. By using the query i mentioned this automatically updates the field fine.
Regards,
Adrian

PO Price update at Header Level

Similar Messages

Maybe you are looking for