Transfer Order Confirmation not updated in Header level (Table: LTAK)

Hi,
We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
It will be a great help if anyone have solution to these issues.
Thanks & Regards,
Nagarjun

Hi Nagarjun,
do you have any Z code in-between ? Did you check OSS notes ? Did you apply all patches to your system ?
What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
Many thanks,
Enrico

Similar Messages

Immediate Transfer Order Creation not occuring for Sales Document Type

Hello gurus,
I have a situation where a transfer order is not being created immediately for a specific sales document type.
Here is an example document flow of a desired scenario where the system is working:
Sales document type: ZOR
> Delivery type: LF
> WMS transfer order
The Item Category in this scenario is TAN.
Here is an example of the document flow in the current scenario where the system is not working:
Sales document type: ZPRD
> Delivery type: LF
The Item Category is also TAN in this scenario. The only identifiable difference in these scenarios is the sales document type. For the ZOR SaTY, a Transfer Order prints immediately once the delivery is created. For the ZPRD SaTY, a Transfer Order needs to be manually created after delivery creation.
Is there a configuration setting that is controlling this? Any help would be greatly appreciated.

Thank you very much for the link. When I insert the WMTA output type in the delivery output header, the Transfer Order is automatically created.
The problem I'm running into now is the configuration setting that controls this. I thought I figured it out when going to this IMG path:
SAP Customizing Implementation Guide --> Logistics Execution --> Shipping --> Basic Shipping Functions --> Output Control --> Define Print Parameters Shipping
When selecting the Delivery Note, the shipping point I was using was not configured in this location. I added the shipping point into this transaction, saved, and created a new order & delivery. However, the WMTA output type still was not automatically inserted into the delivery when saving. Is there another location I should be looking to fix this so that when I enter an order with a particular Shipping Point, the WMTA output type automatically appears in the delivery?

WM-deactvate transfer order confirmation

Hi
    i need to de activate the transfer order. while i creating the transfer order it appeared two check box (confirmation), left check
   box not activated but second check box activated . so i need to deactivated the transfer order confirmation.
i used the (F4) that check box is for
Indicator: confirmation
If this field is selected, the transfer order with all its items has been confirmed.
Use
This indicator is automatically set by the system as soon as the last transfer order item has been confirmed.
Withe Regards
dinesh

Hi friend
            Already i deactivated in TCode OMLJ. I create the TO using Tcode LT04.....
PLS HELP ME TO DEACTIVATE
WITH REAGRDS
DINESH

Partial Transfer Order Confirmation on Picking Process

We are on the picking process with a delivery and a tranfer order. Movement type MM/WM 601.
We have a transfer order item line for 10 units.
We would like to confirm 7 units against one handling unit and the other 3 units against a different handling unit.
We are using RF transaction pick&pack LM46.
The problem is that we don´t know how to split the line item in 2 different items within the transfer order.
We don´t want to confirm the TO with differences and create a new TO for the remaining 3 units. We don´t want either to confirm the TO using LT12 because the process has to be done trough standard SAP RF.
Could anyone help, please?

hi kumar
If you feel this answer suits your query. Please reward with points.
Transfer order confirmation based on shippingpoint
answer: no the transfer creation not at all based on shipping points.
The transfer confirmation you have to in lt12 transcton with teh rransfer order number. creation of transfer you can do in lt03 transaction with reference to the delivery frrom you will get transfer order number after that you have to confirm, so please work on that,
I hope this answer solve your query.
Thanks & Regards
Rack29

Payment documents / Payment orders were not updated in RFFOEDI1 Program

Hi,
With F110 transaction i'm printing Payment summary and Remittance form by using YDFI_RFFOEDI1 ( Copy of RFFOEDI1)
Program variant.
Spool is generating Payment summary and Remittance form along with Error log as below.
Program YDFI_RFFOEDI1: No records selected
The following payment documents/payment orders were not updated
(Result of the payment document update)
CoCd Payment document/Payment order
1019 F110000001
The accompanying payment media have not been generated
YDFI_RFFOEDI1 Program variant is having Generate SAP Idoc check box as unchecked under Print control tab.
Thanks
Bhuvana

Please help me on this issue

Delivery address at Item Level and not at the Header Level

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

It is standard process only.
In Po delivery address is maintained at item level because to which address perticular material to be delivered,
this may change from material to material or may not change

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

PO Price update at Header Level

Hi Friends,
Our PO Price "Update" button at header was grayed out and only able to do at item level??
Actually we have a "Post dated" PO and the tax rate was changed now. So, we need to update the tax rate. To update at item level for each and every item is cumbusome.
Is there any way to update at header level. Or is there any way to update in MASS??
Or is there any program available to carry out pricing for a bunch of PO's??
Any valuable reply will be appreciated.
Regards,
Dev

Hi,
Since the condition type which you are using for taxes are configured to be entered at item level and changes can be made only at item level.
If you want to update it at header level and the condition type is applicable for all the line item in PO, please change in configuartion so that u can make changes at header level.
Path SPRO-> MM->Purchasing-> Conditions-> Define price determination process->Define conditon types . For particular condition type which u want to make changes at header level. Thr is a option changes which can be made. Click on check box for header condition.
Please see that it is config changes and it will get updated wherever this condition type is used.
Reply if u have any issues still.
Thanks,
Ravi

Error in MR11: One or more purchase orders were not updated

Dear Gurus,
While posting MR11 for a account assigned purchase order i'm facing a error as "One or more purchase orders were not updated" under message ID CKMLGRIR 003.
Diagnosis: An error occurred during the update. As a result, an entire processing package of purchase orders could not be cleared.
I checked with the PO and it looks correct.
What may cause this issue? I'm using 4.6C release.
Thanks in advance.
Regards,
RathiM

Please check the SAP note below :
843022 MR11: Error log, purchase order number is missing

2-step transfer order confirmation radio frequency (RF) transaction

Could you please tell me if there is a RF-(mobile) transaction available for a 2-step transfer order confirmation?
Similar to LT1B / LT1C to confirm the "pick"- and "transfer"-step seperatly.
Thank you in advance!

In my opinion, there are no std. RF t-codes similar to LT1B/LT1C. Ref: http://wiki.sdn.sap.com/wiki/display/ERPLO/RadioFrequency(RF)Tcodes
However, this link: http://help.sap.com/saphelp_sm40/helpdata/en/af/c466412ea98447e10000000a1550b0/content.htm says for a putaway process: When RF devices are in use in a warehouse, it is common to confirm TOs in two steps. This means that the worker confirms the first step of the TO at the source bin, and confirms the final step of the TO at the destination bin.
Hope this helps.

Transfer requirement status not updated after TO confirmation

Hi Experts,
I have an issue with transfer requirement which is not updated with completed status even after Transfer Order completed.
Once TO is completed, relevant TR should be updated with completed status. We have many TR in open status even they are completed.
Could you please help me out how to resolve the issue.
Regards
Gowri Sankar

Hi
You can use the Warehouse activity monitor (LL01) to select the completed TR's and select the d''delivery completed' button and this will get rid of them
I hope that this helps
Frenchy

Urgent - Transfer Order Confirmation Error- Item category Type Not defined

Hi Gurus
i need your help for an <b>urgent production issue</b>
FYI we have full fledged Wm implemented
the users are not able to confirm the TO's created and it shows an error that <b>ITEM CATEGORY NOT DEFINED, </b>
i have checked in the STO in me23n which has many different materials in it and it is all having item category = U and also delivery is generated and it also has some item category defined in it also
so can you please help me why this is happening and not able to confirm the Transfer orders
thanks in advance for any help
regards

Chakri
Could you solve the problem. If so could you tell us what the solution.
Thanks
Aju Paul

Sales order output type is on header level, but output trigger is based on

line item user status.........
Order Confirmation is sent to the customer once confirmed.
Depending on the scenario and the systems involved in the process, the trigger to send the Order Confirmation from SAP is differ. The user status will be used as the trigger, however different statuses will be used depending on the scenario.
Client wants all items on a Sales Order to appear on the Order Confirmation. What this means is that once an Order Confirmation is triggered at the item level an Order Confirmation will be issued and include all items on the Order.
For example, a sales order (123) contains 3 items (10, 20 & 30). The first item (10) is passed user status (which required triggering an output) and the status is updated, the other two items were not passed to that user status which required triggering the output. The output should be issued based on one item meeting the qualifying criteria . The Order Confirmation should contain all 3 items. The first item (10) will show on the Order Confirmation as confirmed qty on a specific date at a specific price. Items 20 and 30 will show on the Order Confirmation as Pending. When the second and or third items are confirmed, another Order Confirmation will be issued showing again all 3 items and the whether they have been confirmed.

Hi!
Sounds like you need a line-triggered output (with a message, which displays all lines of the order).
Do you have problems to create a new output type?
Regards,
Christian

Purchase Order history not updating in my STO

Dear Experts,
We are doing stock transfer order internally for FERT and *BOUGHT OUT * items. Now at the time of delivery through VL10B all bought out items are appear in outbouddelivery but FERT item material is not coming automatically in delivery. System pickes up item category as NLN but if i manually added FERT material at the end system picks up item category as ULN & purchase order history also not updated in STO.
Also in MD04 system is showing reservation against STO number & the result is i am not able to do delivery because system is showing message as only 0 qty is available for picking
Can any body helps me in this?
Thanks
Trupti

Hi,
Define your item category setting for your Delivery..
Under SPRO>Loge-Exce>Shipping-->Define item category determination in Deliveries.
Note: You should not enter the line item manually in delivery, thus it will store the item category as DLN (DLN is for without order Reference) so it wont record any history.
Regards
GK..
Edited by: Gnana Kumar on Oct 26, 2010 1:04 PM

Purchase order history not updated when invoice is posted for framework POs

Hi,
We've created a framework PO and now posted an invoice against it. The invoice was posted in the following way:
1. Go to transaction MIRO
2. Enter the PO number in the PO reference field.
3. Select the "G/L Account" tab and enter the value manually and also enter the amount at the header level and then post it.
But when I go back to the PO, I don't see the PO history tab and hence, the PO history is not visible.
Does anybody have an idea on any config that may be missing?
Any clues will be appreciated.
Regards,
Lakshmi

Hi
Did you refer to the same Framework purchase order while posting the invoice?
Invoice has been posted succesfully and number generated? If yes then check in MIR5/MIR6 the purchase order reference for that Invoice.
If everything is correct then you can see the IV number in PO history tab.
Thanks

Transfer Order Confirmation not updated in Header level (Table: LTAK)

Similar Messages

Maybe you are looking for