PO Release WF not sending workitem to inbox

Hi All,
We are working on activating the PO release WF 'WS 20000075'. We activated it thru OOCU and it is triggering when we save the PO (i checked in SWEL) but we do not see any workitems in SBWP (inbox). I 'Agent Assignment' is in GREEN and is a 'General Task' in the task.
This is the config we did in SPRO:
SPRO -> MM -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders -> Define Release Procedure for Purchase Orders > Workflow -> Here we assigned OT as US and respective User ID's for Release Codes.
When i double-click on the entries in SWEL:
- The 'Receiver Data' section is BLANK and in the 'Trace Data' section, action says 'No receiver entered'.
I think the WF is not able to read the AGENT. Not sure. Can anyone please help me with this/
Thanks in advance.
Karuna.

Karuna,
How have you managed to read the agent?

Similar Messages

Send Workitem from Sap inbox to outlook

Hi all,
Any one please explain how to send workitems in sap inbox to outlook.
What all configurations are needed?
Thanks in advance

First you need to be able to send an e-mail from SAP Business Workplace to your e-mail address. If that's not in place you need to configure the e-mail connector or whatever it is called. Basis people should be able to help you with that. It not only involves setting up SCOT to transmit messages with address type INT, you also need to have jobs running on your application server to pass on the SMTP messages.
Once that is working you can start thinking about e-mail notifications for workflow. If you have transaction code SWNCONFIG in your system, you should use the extended notifcations that you configure there - that is SAP's recommendation. In order to use it it seems you must have SAP Web AS running.
The other alternative (unless you are on a release < R/3 4.6C) is the report RSWUWFML2.
For assistance setting up any of these three, please post your specific questions.
In both cases you need to have a sender address defined for the user that executes the report, any user sending e-mail must have an e-mail address in the user record.

Workitem not received in SAP inbox(SBWP)- In SOST status is waiting

Hi Experts,
After executing workflow , I am not getting the workitem in SAP inbox.
I am sending mail using BOR Object type SELFITEM and method SENDTASKDESCRIPTION.
In SOST , status is in waiting ( Send method - Remote ).
For Send method - via Internet its working fine . Mail is sent to external mail address. But for Send method Remote send requests are in waiting status.
SAPCONNECT job also getting executed every 5 mins in back ground.
SCOT-RML routing exists with Address area * , Node in use check box i, Node supports : connection test, status, trace , Supported address types - R/3 is checked.
Please let me know any other settings has to be done to send workitem to SAP inbox.
Thanks & Regards,
Priya.

Hello,
"After executing workflow , I am not getting the workitem in SAP inbox."
You are confusing workitems with emails. SENDTASKDESCRIPTION = email.
regards
Rick Bakker
hanabi technology

Error in sending workitem to outlook if Email id is not maintained in SU01

HI Guys,
                 Right now i am working with PCR workflows. Here the approval will go both to the SAP inbox and the Outlook Inbox. For sending workitem to outlook i had scheduled a background job RSWUWFML2.
          My problem is if the Email id is not maintained for the approving manager in SU01 Tcode, only userid is maintained, the workitem is being sent to SAP inbox and the workflow is getting errored because there is no Email Id for him.
                     How to resolve this issue i.e.workflow should also work fine if Email id is not configured.
Regards
Kumar

Sorry I read it otherwise....For the email to go to Outlook 2 approaches.
1) Maintain email in IT0105 for the manager
or
2) Maintain the email id in the userid of the manager.
Otherwise how the workflow know which email id the email has to go.
hope this helps
Regards,
Swati

PR Release Workitem in inbox

Hi Friends,
I have worked on standard BO.
PR release workflow as purchaseofficer got the mail and pr release-please register workitem..that's fine.
But purofcr should be click on workitem. he is not saved. then purofcr back to inbox. but workitem is not inbox. it's go to outbox.
now client requirement workitem is not saved still in inbox after saved then go to outbox.
Plz need your's help.

Hi,
i know difference in mail & workitem. and check also outbox.
my Workflow purchase officer got mail and workitem both.he is click on workitem. then he is not check the confirm button. he is back to inbox.
not before confirm check box disappear on workitem in inbox.. then after check the check the disapper in workitem.
Regards
MSR

Workitem is not removed from User Inbox

Hi,
There is requirement, when the PR is created by user, first it has to go his department Head and then to Manager, AGM, GM, etc. There are different departments.
I'm maintaining organizational structure and giving positions in Release Strategy. Now how can i know who has created and to whom it has to go first. Shall i create different release strategy for that ?? Or is there any other way ??
And i tried to create custom workflow and using two release steps instead of one. And giving Rule in my first release step. And in second release step i'm using the strategy. When i create the PR and release, it is not removing from User Inbox.
Do anyone know what could be the problem ??

Hi,
From your requirement, its not a good idea to have all department heads assigned to a single position.
But, you can have different positons for different departments and the association between department and the corresponding position number can be maintained in ztable. Then have a custom rule based on function module which will make a call to this ztable and find the corresponding postion given the department of user, get this position out and use it as agent assignment in step. However to use above first you should be able to find the Deparment to which a given user belongs to.
the position that you are talking about in your question, is it a position with relevance to HR structure or is it just that you have created for workflow purpose. In general its a good idea to have bit strong dependency with HR structure rather than going for workflow specific positions. If your position is a HR position then probably with bit of reengineering the HR organization structure with respect to your departments would be good and with a good design of org structure you can also get rid of any new custom table to maintain the relation between department and corresponding position.
Good Luck !!
Regards
Krishna Mohan
ooops !! many replies came in while drafting this mail itself, i guess rule using custom table already tried !!
Edited by: Dubbaka Krishna Mohan on Jan 29, 2008 9:20 AM

Workitem is not avilable in approver inbox

HI,
shopping cart is triggered with approver .
but the workitem is not avilable in approvers inbox .
pls let me know the possible reasons.
regards
venga

there is a table called "SWWUSERWI"...
Go to se16 and type the table name and press enter
Provide with username and execute...
It will display list of workitems in his inbox....
This way you can check whether workitem is there in his inbox or not
once you find there are workitems...go to T-code swi1 provide the workitem id to see the details of that workitem id...
Rg
sam

Workitem not receiving in workflow inbox

Hi All
Workflow working fine in Dev110(development system), but not working in DEV130(Unittesting) . In Dev 130, once workflow is triggered through background proces(WF-BATCH), workitem is showing up in WF outbox... but not showing in WF inbox.
Please suggest if you have any idea with detialed steps.
Thanks alot!
Ravi

Martin
   when i stated workflow, Yes dialog workite created in DEV110,its howing like this in log details of dev 110.
Background work item created
Execution started automatically
Work Item Processing Complete
          9 Is Special is Associated
        525 Form Number 0000006833 fo
Dialog work item created
but when i start workflow in DEV130,its workflow sucess full, when i go logdetails , its showing
Background work item created
Execution started automatically
Work Item Processing Complete
         9 Is Special is Associat
       175 Is ELL
       198 Is NCLB
       349 Decision Taken
note: here Iam creating position online form , i am passing specialad values.
when special find its wants to take decision specied found. configuration everything fine , now already working in 110.
pls Can u clarify where is the problem , how should i get message to workflow inbox.
Thanks
Ravi
Message was edited by:
        ravi naidu
Message was edited by:
        ravi naidu

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blue yonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

Hi I have a mac osx lion10.7.3 and i can't get my mail set up with a blueyonder.co.uk address inbox works fine but i can't get outbox to work will not send mail any idea's thank's

And, you are sure you have provided the correct username and password for you email account? I'm not familiar with Virgin media, so you might contact their tech support to find out why you are having a problem sending mail but none receiving mail. I assume your mail account has always been POP3 and not IMAP. Typically, the outgoing mail servers are not the same for the different types of account service.

Not able to send workitem to external email id or Lotus notes.

Hi,
I am using standard program RSWUWFML2 to send workitem to external email id like lotus notes. When I execute this program i get the message "Work item xxxxxxxx sent to xxxxxxxxxxx".
As per the documentation of the program, program should process the workitem and send the same to external mail id. Please let me know if i miss something.
Below are the settings i did for program.RSWUWFML2
Job suffix 2
Tasks (blank = all) : task name of the workitem to send is entered. only one task is entered.
New Work item = X
One message per workitem = X
workflow entry = X
workitem = X
workitem execution = X
logs all =X
Edited by: Sunny80 on Dec 1, 2009 8:58 AM
Edited by: Sunny80 on Dec 1, 2009 9:01 AM

This is solved.

A Power User Can Not Send Data - BPC Release 7.5.112.07 MS

Hi BPC Community,
We have a group of users who are able to send data to locked dimensions. We added a new power user and this person can not send data to locked dimensions (see attached screen-shot). The person is checked box as a "leader" in the Teams responsibility.
Any suggestions?
Thanks. Barry

Hi
Options
• All = any user with member access write privilege
• Owner = only users assigned as owner with member access write privilege
• Mgr = Owner of parent dimension member is manager of child dimension member
• Locked = no user regardless of authorization.
Controlled By: Determines who can select the work status code
• Both = owner of the specific member ID and the owner of the parent to the specific member ID
• Owner = owner of the specific member ID
• Mgr = owner of the parent to the specific member ID.
also go through below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2064bb40-ea48-2e10-069c-cc6878a0f1cc?QuickLink=index&…
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0CEIQFjAE&url=https%3A%2F%2Fhelp.sa…
Hope this will help you.
sushant

Regarding to sending workitem in PO.

Hi Friends..
Iam creating one workflow for Purchase order referring standard workflow 20000075.Whenever iam create a PO it automatically trigger that workflow
and send an workitem to approver for to release PO.Everything is fine
but i need to display popup window while workitem reaches SAP user inbox.
(like send express statement in sendmail task).So how can i achieve it.
i need not sending any mail to approver so its not possible to include sendmail task.so how can i achieve it..
Thanks in advance
Gowrishankar

Open the template in PFTC and click change. Open the builder and double click on the node Release of purchase order(000093). Select the 'Other' tab and change the step priority to 1 (Highest). Save and activate the template and refresh the workflow runtime buffer using transaction SWU_OBUF. Then start a new instance as the process is NOT retrospective.
Regards
Gareth

PO released is not going to WORK FLOW

Hi,
We had implemented the WORFLOW for PO and SA release process. It was working fine and system sends messages to WORK FLOW Inbox. From last few days, suddenley messages are not going to workflow inbox.
Where as PO/SA Release strategy settings are OK and each strategies are enable for worflow.
But messgae are not going to Work flow inbox.
I feel some settings missed out in WORKFLOW settings.
Please help us to resolve the isue.
BR,
Nagaraj S

Hi Nagaraj,
Can you check if the event linkage is active in t-code SWETYPV.
Check if the reciever to the BO event is the desired workflow.
Also check the event trace SWEL for worfklow getting invoked when PO is released.
Regards,
Saumya

Notification mail not send

Hi All,
I have an issue in PR workflow.A notification mail is send to user to approve a PR,but the user says that he did not receive that notification mail.He manually goes to transaction & approve the PR & workflow gets completed.
Please let me know how to find out the cause of this problem.In my workflow log it shows workitem approved by the user.
What can be the cause that notification mail is not send.The user email id is maintained in su01.
Please help.
Thanks in advance

Hello,
You wrote:
"As he executed that step manually ,automatically the workitem got deleted from the user inbox"
This is not something that happens automatically. Is the workflow listeing out for an event which tells it that the activity represented by the step has already been done?
I assume you mean the user performed the operation that was supposed to be done via the workflow step, not that he performed the workflow step itself. If the workflow log shows that he did perform the step, then the user is mistaken.
regards
Rick Bakker
Hanabi Technology

SharePoint 2010: Scheduled Web Analytics Reports workflow is not sending ANY email

Hello,
I've a SharePoint 2010 Enterprise farm. I setup a Scheduled Web Analytics Reports workflow in a site collection with different web analytics reports options checked. So far I've not got ANY email. When I went to Site Workflows, I'm seeing that the workflow
is running. When I click on Completed status, I see below outcome in the Workflow History section:
"Email sent but reports with no data were not attached."
And I see below information in the Workflow History list:
"Attached are the daily Web Analytics reports for 1/7/2015 through 1/7/2015 for SharePoint Site Collection
http://server/team/site scheduled by workflow "SharePoint Site Web Analytics Reports". "
I am able to generate the reports manually by going to Site Collection Web Analytics Reports, but I want to schedule them. The problem is I'm not getting ANY email in my inbox. What am I missing here? Are the emails getting filtered by Outlook or workflow
is not sending emails at all?
Please help! This is getting frustrated.
Thanks,
Ashish

Hi Ashish,
Based on your description, my understanding is that the email is not sent from the Scheduled Web Analytics Reports workflow.
I recommend to the things below:
1. Check if the Outgoing email has been configured for the web application where you run the Scheduled Web Analytics Reports workflow.
In Central Administration > Application management > Manage web applications > select the corresponding web application > click General Settings in the ribbon and select Outgoing E-mail.
2. Make sure that your account has email address configured.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

PO Release WF not sending workitem to inbox

Similar Messages

Maybe you are looking for