Podcast does not catalog in right area

When I create a Podcast in GB 3 and "Export as Podcast" under Share, the resulting file does not go into Podcasts area when I drop the file into my iTunes Library (I export to the Desktop and then drag that file to iTunes->Library). In fact, GB does not give the Podcast a Genre of Podcast either, it is just blank.
This is after I have filled out the Episode Info (ie; Title/Artist/Description ).
This problem is not unique to GB 3. Any mp4a file I drag to iTunes library and lable Podcast, does not end up in the Podcast area in my iPod when I sink.
Does anyone have a solution for this?

I think the Podcast playlist only contains the podcasts that you are subscribed to and downloaded from the Net, not the ones you create in GB.

Similar Messages

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik

Shooting "squeezed" 16:9 does not look quite right when exported to 16:9

Hard to put a title which would cover the problem well, probably hard to describe it well, too, for an amateur:)
Anyway, I have a cheap JVC GR-D320E which serves me well as a beginner´s camera (for the price I gave) but when I shoot in what it calls 16:9 mode which I have understood it is not true 16:9 but in a way squeezed, and I import this to FCE (set to Anamorphic PAL), it all looks good within FCE but when I export it using QT Conversions and setting the proportions and size manually to what is supposed to be the right dimensions for 16:9 PAL (1024x576 if I remember it correctly) it does not look right. The persons "grow shorter and fatter", if you know what I mean.
I have tried to change the dimensions in QT Pro, but the problem is to find the correct ones. I also wonder why this happens and if there actually are "correct" proportions which then would be something between 16:9 and 4:3 or if I am doing something wrong?
When I export not using QT Conversions, the result is 4:3 which isn´t right, either...
Well, hope I have been able to describe this in a way which is possible to understand...

I want to export it for several purposes; all you mention, in fact; to put on the web, to play on the monitor and to make a DVD. As I mentioned, when I exported as a QuickTime movie, it came out as a 4:3 and that of course, looked awful.
Using the conversions, I can scale it as I want to, but to me 16:9 does not look exactly right, either. That is why I wanted to know if there are some proportions in between the 4:3 and 16:9 which is appropriate for footage which is not filmed in true 16:9 but in this option which cheaper cameras have.
The article you linked to, did not tell anything new, alas.

Funds center 000000 does not exist in FM area and fiscal year 15.06.2009

Hi Expert,
When I tried to cancel Invoice via MR8M, I get Error message "Funds center 000000 does not exist in FM area XXX and fiscal year 15.06.2009"
Please tell me what is wrong here.
Thank you.
Regards,
Henry

Hi,
That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
Regards,
Eli

Funds center does not exist in FM area MOF1 and fiscal year

Hi Consultants,
I have configured the derivation strategy in FM and other relevant configurations. When trying to post a GL transaction in FI, This error message came up;
Funds center 0000412000 does not exist in FM area MOF1 and fiscal year 10/13/2010
What did i not get right.
Please reply.
Thanks.
Ekemini
Moderator: I believe, the error message speaks for itself. Please, avoid asking basic questions

Hi,
That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
Regards,
Eli

TS3048 my magic mouse does not want to right click anymore?

My magic mouse does not seem to right click anymore, any suggestions? For example, I used to right click on my icon of my memory card from the camera that I have inserted into the side of the IMac and I could choose "eject" now it doesn't want to right click and open up those options. Am I doing something wrong?

Hey.
This seems to be a common issue.
I've seen mixed posts on the net about the ES8000 working with the Apple Keyboard but from what I've seen the Apple mouse tends to fail the sync constantly.
Sad, I just bought a mouse to improve navigasting on the ES8000 and dissapointed that it doesn't sync. Maybe an issue with drivers on the TV.
Which Dell mouse (model number) works for you?

WBS element does not belong to business area(Message No: CJ067)

Hi All,
While doing Billing through DP91 by giving the Sales Order No.,
it is giving the error "WBS element *****does not belong to business area** ".
The configuration between Business Area and Plant in Enterprise Structure level is fine.
Do let us know anything else need to be done to resolve the same.
Needless to say that helpful replies will be awarded points.
Best Wishes & Regards,
Raj Kumar Reddy.

Hi Chandra,
Business Area was given both in CJ20N and Sales Order level.
Also both these business areas are same.
To be more clear:
Say in the error it has mentioned the business area as 'X'.
But in Sales Order and Project level, 'Y' has been maintained.
System is throwing 'X' error, because the same is maintained under Cost Center level.
I cannot change the business area in Cost Center to 'Y' because of my business restrictions.
Regards.,

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

Portlet repository-- Seeded providers does not show Portal Content area

Hi,
When I login to portal as admin user go to administration --> Display portlet repository--> Seeded providers does not show Portal Content area.I tried to search but no results shown.
Any idea as to how to get it back ?
Thanks and regards.
Neeti.

1. From the Portal Object Navigator, click on the Applications
tab.
2. In the "Find" box, type %search% and click "Go"
3. There are 2 reports you need to modify, depending on which
portlet provider you want to use: RPT_SEARCH (owned by
people_app) and SEARCH_RESULT (owned by wwv_system)
4. For each report, click the "Edit" link
5. Click the "Display Options" tab
6. Under the "Full Page Options" heading, change the "Size"
for "Row Text" to 12. (If you are running the reports as
portlets, then you must also change the "Size" for "Row Text"
under "Portlet Options".)
7. Click OK
Search results are now visble using either portlet, the Oracle
Portal provider or the PEOPLE_APP provider.
You may also need to change the field settings on the hierarchy
if now when you run the people search you receive SQL errors.
Here is what worked for me (assuming you want to change both
users components):
1. On the Application Tab search for %search% and %detail%
components. You don't need to change the WWMON components.
Change the font size on the full page and portlet options
(Display Options Tab)for the heading and text (I use 12 and
11pt). Otherwise the default can only be read with a magnifying
glass.
2. The org chart components are slightly different. Search for %
org% and you will find 2 components org_chart and orgchart. Both
of these need to have the column fields changed (Table or View
Column tab) as well as the font size for the Parent, Child,
Grandchild (Display Options Tab). Here are the Table Column
settings (for some reason they are initially blank - yet will
fail if recompiled without values):
People_App.Org_chart
1. key values:
primary key - empno
parent key - manager
start with - empno
ww_system.orgchart
1. Primary Key Column WWSEC_PUBLIC_DIRECTORY.ID
Parent Key Column WWSEC_PUBLIC_DIRECTORY.MANAGER
Start With Column WWSEC_PUBLIC_DIRECTORY.ID
Hope this helps. The second half of the answer provided by Rich
Pickett.

Playlist of Podcasts does not automatically move to next Podcast

Creating a Playlist of Podcasts does not appear to work the same as a Playlist of music. For Music, on the iPod i go to Playlists menu, and from there, with a particular playlist selected, i press Play on iPod, and the Playlist starts, and it says 1 of 100 (or whatever). With a Playlist of Podcasts, does not appear to me to behave in same way. From the Playlist menu, if i press Play on the iPod with the Playlist name selected, it does not start. I must press center button on the iPod to go down to the actual list of Podcasts in the Playlist. Then, i can select one to play. When it plays, its says 1 of 1. And, it does not move to the next Podcast when the first Podcast finishes.
Can somebody help me out? Is there a way to create an actual Playlist of Podcasts that plays one after another, just like a Playlist of music cuts? Am i missing something? Its real tough in the car to select a new Podcast when one finishes, so i had hoped this problem was solved by making a Playlist of Podcasts, but so far it appears to me to not be solved. Thank you. Tom.
Windows XP
Windows XP
Windows XP
Windows XP

Just for anybody else's info if you read this, it was only necessary to turn shuffle off on the iPod. Didn't have to check/uncheck any other checkbox. This was great! Thanks for the pointer!

Playlist of Podcasts does not automatically move to next Podcast on iPod

Creating a Playlist of Podcasts does not appear to work the same as a Playlist of music. For Music, on the iPod i go to Playlists menu, and from there, with a particular playlist selected, i press Play on iPod, and the Playlist starts, and it says 1 of 100 (or whatever). With a Playlist of Podcasts, does not appear to me to behave in same way. From the Playlist menu, if i press Play on the iPod with the Playlist name selected, it does not start. I must press center button on the iPod to go down to the actual list of Podcasts in the Playlist. Then, i can select one to play. When it plays, its says 1 of 1. And, it does not move to the next Podcast when the first Podcast finishes.
Can somebody help me out? Is there a way to create an actual Playlist of Podcasts that plays one after another, just like a Playlist of music cuts? Am i missing something? Its real tough in the car to select a new Podcast when one finishes, so i had hoped this problem was solved by making a Playlist of Podcasts, but so far it appears to me to not be solved. Thank you. Tom.
Windows XP

Just for anybody else's info if you read this, it was only necessary to turn shuffle off on the iPod. Didn't have to check/uncheck any other checkbox. This was great! Thanks for the pointer!

Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010

Dear Expert,
We have activated Funds Managment in quailty Client. but when ever we are trying to create PO below error message is coming:-
Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010
Message No-F6580
Also when ever we are trying to post an FI document the same error message is coming.
Please advise with T-Code.
Regards,
Alok

Dear Mr Srinu,
The Z001 problem is solved by creating a fund centre using FMSA. Now while doing the shipment cost below error message is coming:-
1.Account Assinment to Commitment Item not supported with this GL account. Message no-ME032
2. No Funds center entered /derived in item 00010(1020/302401/)
Pl help,
Regards,
Alok

Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, an

Hi,
i am creating schedule agrement or 1 st april 2009 getting error
Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, and variant

Hi
Try
u can do one thing create commitemnt item for the year 2009. public sector management - Create commitmen titem
then u assign commitment item to GL in Fmderiver Transaction code
then u post
Reagards
Roobal

Podcast does not update on iTunes

Podcast does not update on iTunes
the url
http://itunes.apple.com/tw/podcast/id335308817
the last date is 2010/6/17
But the feed url
http://iphone.realma.com/podcast/ettv.xml
the last date is 2010/10/21 and daily update
Why? Is there any thing wrong in the feed url?
Thank you!
Message was edited by: realma

I'm afraid I can't make any sense of this. the iTunes Store page lists 301 episodes from 12 January 2010 to 17 June 2010. If you click on the 'subscribe free' button your iTunes application subscribes to the feed at the URL you give, which contains rather fewer episodes from 17 September 2010 to 22 October 2010 (today).
It's not unknown for something in the feed to be OK with the application but not the Store, but the feed validates in FeedValidator and I can't see anything wrong with it - it's almost impossible to read as it's all on one line, but it doesn't seem to contain any of the usual culprits.
The only explanation which would make any sense (and which doesn't seem to be the case) would be if the feed had been complete only to 17 June until a few days ago, and you only recently replaced it with the current set of episodes: it normally takes 1-2 days for changes to appear (so even under normal circumstances today's episodes wouldn't appear yet in the Store, only on subscribing). Since your feed contains episodes back to September this doesn't seem to apply, but I can't see any other reason.

Podcast does not catalog in right area

Similar Messages

Maybe you are looking for