POI version 3.1 issue

Hi all
I downloaded poi latest version 3.1..
But this jar doesnt have the HSSFPatriarch class which it is available in previous versions..
In this case i already used this class in my projects.
The below exception is throws when i m using the latest version
Exception in thread "AWT-EventQueue-0" java.lang.NoSuchMethodError: org.apache.poi.hssf.usermodel.HSSFSheet.createDrawingPatriarch()Lorg/apache/poi/hssf/usermodel/HSSFPatriarch;
How can i tackle this problem ? can any one tell me the solution

You managed to find the Apache site for the download on your own. Or did someone hold your hand for that too?

Similar Messages

EDI X12 Version 4060 setup issue in Oracle B2B 10g

Hi All,
We are currently encountering some issues in doing Inbound Trading Partner Set-ups to accept Inbound 210 Documents using EDI X12 Version 4060.
We created an ecs file(only from ST to SE) excluding envelop, doing all the reqd set up in B2B ,keeping "use Default Document definition" box checked (for 210), deploying agreement and all ; we are getting below error:
+Element ISA12 is a coded list element. Code '00406' is not allowed. Segment ISA is defined in the guideline at position 010.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Position: 12{br}{tab}Characters: 84 through 89+
any help regarding this welcomed.
Regards,
Ravi

Hi Anuj,
Yes this problem is coming in 10.1.2 b2b version..steps we have done are mentioned below :
1. create a new business action -->created a new dcoument protocol with revision 4060
Now we define the document protocol parameters (here we mentioned ISA & GS qualifier
& values for the host trading partner) & we leave the interchange ecs file & group ecs file values blank here.
here we leave these parameter values : Interchange Control Version Number & Version/Release/Industry Identifier Code as Null or blank.
Next we define Document Type: 210 with revision as 4060 & then attach a new document definition with this
(here we specify the transaction set ecs & xsd files ( this just has the ST-SE transaction set meaning the ecs
doesn't have the ISA & GS envelopes here in it( while creating ecs in spec builder we are not Inserting the envelopes in it))
2. TP definition/setup :
Here we define the trading partner -- here we define a new operational capability -- here we select the
business action created in step1.
Now here we uncheck the option (Use defualt Document Protocol Paramters and mention the interchange & group qualifier & values for this trading partner.
here we mention Interchange Control Version Number : 00406
Version/Release/Industry Identifier Code : 004060
Here also we don't mention anything for interchange ecs file & group ecs file values, we leave these blank/null.
Also we leave the checkbox for : Use Default document definition as Yes.
Now could you please review & advise what exactly needs to be done.
regards

Can't export versions and other issues

Background.
I installed a SSD inplace of my Mac HD. Moved the Mac HD to the superdrive bay.
I have the OSX operating system on the SSD and my home folder on the Mac HD.
I used system preference to point the operating system to the new home folder location.
Everything seemed to be OK untill I started looking deeper.
In Aperture I was able to open all of my libraries. Everyting looked ok. Testing further thought I discovered that I can't create a new library or export versions.
In mail I can't attach files.
I also can't log onto this forum. I know the username and passowrd are correct. Even before this I could never sign in on another device. So I doubt this is related to my self inflicted issues.
I have deleted plist, ran some mainetence items with ONYX, and repaired permissions. No joy from any of those attempts.
I created another user and Apple ID ( that's how I got back on here) .
Using the new user every issue seems to be resolved.
Because things are ok with the second user I am thinking a re-install ( Mtn Lion or Aperture ) may not help. That was going to be my next move.
I could move my home folder back to the startup volume, but the Aperture libraries would be too large to fit, even though the libraries are referenced I seem to have a lot of GB for each library, like 35 GB for 10,000 pictures. My thumbnails are set to very near max quality and the resolution is more than 1920 x 1080. ( I am not sure right now what my 27 " Cinema Display is )
If I were to move the Aperture libraries out of the home folder first, then relocate the home folder back to the SSD, would I be able to access them if they are outside the normal structure?

In Tiger, all mobile accounts synchronize by default. WGM allows you to change the current settings only. To turn off sync, manage both background and periodic sync "Always" and then use a empty table of sync items. Syncing is thus stopped.
To stop syncing an unmanaged mobile account, delete ~/Library/Preferences/com.apple.homeSync.plist and ~/Library/Mirrors/*.
Simutaneous login prevention is really a per-home directory feature so it does not work for mobile accounts. See http://discussions.apple.com/message.jspa?messageID=1733887#1733887

Vibe 3.4 Versioning + File locking issues

Dear all,
I've searched many Links in google and also the many Novell Forum Threads, but nothing answers my question. This confuses me because I can't imagine that only we have this problem.
Here our Issue:
We want to use Vibe as a File Management System with the feature of file versioning. So we imported our Files (Office files, PDFs) into our Vibe Server and started testing with the versioning.
What we noticed is that it is very easy to destroy the whole versioning of a file! You can reset a files version (f.e. 1.7) back to Version 1.0 with one simple click. It even deletes the whole version history of that file!
Let me try to explain:
We Have our Vibe Server (V.3.4) and many Clients (Win7) that have the Office 2007 Vibe Addin + Vibe desktop Client installed.
Now if a User opens a file (f.e. Word document) from the Vibe Server, with the Browser or with the office addin, makes changes and then wants to save them, he is asked if he wants to create a new version or overwrite it.
If you press "create new version" it does what is should, but if "overwrite it" is clicked, it will delete the whole versioning + history of the file...
This is not acceptable for us, because we need to keep the versioning of files for our documentation we create that belongs to files. It is no solution to change the rights to only read for all users. Because everyone needs to be able to create files, change them and delete if necessary.
Now to my confusion, are we the only company that has this requirement? I cant find anything regarding this problem...
A second Problem that we have is with the lock function in Vibe. You can lock a file but other users can easily open that file (f.e. over the web browser), make changes and save them... They are then the author of the file.
So the lock seems to be only a visual notification that it is "locked" from another user.
Can someone please help me on these issues?
Thanks and regards
Michael

Hi all,
sorry for the late reply.
In the meantime I found out something interesting. The mechanic of the office Add-In seems to be broken (?) on some user clients! We compared a few Clients that have the office 2007 + Vibe Add-in installed, and we noticed a big difference in the updating mechanic!
On my Computer (= broken Add-in), when I open a File from the Vibe server, the first thing I noticed is, that my symbols (Dashboard, lock, refresh, etc.) in the Vibe Add-in are grayed out! I've checked the rights to that file, they are fine. It doesn't matter if I'm a user with admin rights or if I open it as THE Admin, same issue. Even the Dashboard to the right (in office), which should show me the owner, name, and version of the file, is missing. When I make a change and click "save" it opens the "save as" window.
On the other client (correct working Add-in), all the Vibe Add-in Symbol are usable, the dashboard is shown and when you press "save", it creates a new version. This is what I expect it to do.
If I use another Client with my credentials, it works fine! The strange thing is, the Add-in error only affects a handfull of clients... I've tryed everything to do a clean reinstallation of the Vibe Office Add-in but it doesn't fix the issue. I think that some files are not being deleted when doing the uninstallment.
I've checked the eventlog, it showes me the following message when opening files described above:
ERROR 2015-01-28 15:24:12,436 Novell.Collaboration.UX.Util.WindowSettings [1] - Unable to load window settings
System.Configuration.ConfigurationErrorsException: Fehler beim Laden des Anbietertyps: Novell.Collaboration.Core.Settings.AppDataSettings Provider, Novell.Collaboration.Common, Version=1.0.1.302, Culture=neutral, PublicKeyToken=null.
bei System.Configuration.ApplicationSettingsBase.get_I nitializer()
bei System.Configuration.ApplicationSettingsBase.Creat eSetting(PropertyInfo propInfo)
bei System.Configuration.ApplicationSettingsBase.Ensur eInitialized()
bei System.Configuration.ApplicationSettingsBase.get_P roperties()
bei System.Configuration.ApplicationSettingsBase.Reloa d()
bei Novell.Collaboration.UX.Util.WindowSettings.Restor eSettings()
Regards
Michael

Version & Upgrade Development Issues

Hello,
We are currently developing forms and reports using
Developer/2000 ver 1.3. It's more than a little out-dated so we
are discussing the procedures for an upgrade. We are currently
facing the version/upgrade dilemma.
The company uses Oracle Applications ver 10.7 smartclient on a
Oracle 7.3 server.
Should we upgrade to Developer/2000 1.6 or 2.0?
Or should we upgrade directly to Oracle Developer 6.0?
Also does anyone know if an application(forms, reports) designed
in Developer/2000 1.6, 2.0 or Oracle Developer 6.0 will work
properly in Oracle Applications ver 10.7 smartclient?
Has anyone tried this yet?
How successfull was your applicaiton working?
Sorry about all the version numbers.
Thank You for any assistance,
Dwayne Thomas
null

Simon Hedges (guest) wrote:
: I can't answer much of your question, but I would advise
: not going to Version 2.0 of Developer. If you want to go
: to version 2.x, go to Version 2.1, which contains
: bugfixes for 2.0.
: We currently use version 1.32, and will be upgrading to
: Version 6.0, but have no issues relating to Oracle
: Applications to worry about.
: We believe that upgrading to 1.6 is pointless, and
: remaining on 1.32 will leave us in an Oracle support
: desert very shortly. We will be upgrading to 6.0
: instead of 2.1 in the main because we are told that
: there is hardly any difference between the two, and
: so there is less to go wrong!
Thank you very much for information on Developer, I know it gets
kind of crazy dealing with upgrading and version compatibility
issues, so that's why I posted the message.
Your response is very much appreciated.
Dwayne
null

0PM_OM_OPA_2 Datasource VERSION Field extraction issue

Hi ,
I am facing an issue with Standard data source 0PM_OM_OPA_2. It is converting the value of VERSION Field to 0 always even though the source records ( identified in RSA3) are having the values like 0, V1, V2 etc..
Testing is done in RSA3 and identified the above problem.
Plz give some inputs on this issue if there is any workaround or solution.
Thanks in advance.

Hi,
I'm facing the same issue on a different datasource for PS. Have you found the reason behind this?
Regards,
Sameer

Oracle Retail Warehouse Management System Version 13 Application Issue

Hi,
I have installed RWMS version 13 Installation, successfully.
But not able see the login screen, after use the URL-http://< host name>:7781/forms/frmservlet?config=rwms13.Only the black screen appears.
Please find the details of the product:
Product: RWMS
Product version-13.0.0
Platform-Linux x86-64
Database- Oracle 10.2.0.3
If any body have installed and able to access the application, please help me out
to resolve the issue.Did I miss something during the installation.
I have followed the RWMS 13 installation documentation begining to end.
Thanks in Advance

It is hard to say what the issue is without knowing all the details, but I would start looking at the following:
$ORACLE_HOME/forms/server/formsweb.cfg and in particular the FORMS_PATH variable setting. That's what stumped me in the beginning.

7936 not showing software version and vlan issue

I have a 7936 that does not show the software version. I have installed the newest load on the callmanager, but still cannot see what version it is running on the phone.
My main issue with the phone is that I have to set the switchport access vlan to the voice vlan, if I try to let the phone use the swithport voice vlan, it will pull an IP address off of the data vlan and not the voice vlan.
Any help with either of these issues would be greatly appreciated. I do rate all helpful posts.
Thanks,
Robert

Hi Robert,
Here is some info that may help;
Verifying Firmware Version Information
You can obtain information about the firmware version installed on the IP Conference Station.
Follow these steps to verify the firmware version on an IP Conference Station:
Step 1 Press the Menu button.
Step 2 Press the Up or Down scroll button to select the Admin Setup menu.
Step 3 Press the Select button.
Step 4 Enter the administrator password. (The default administrator password is **#.)
Step 5 Press the Enter softkey.
Step 6 Press the Up or Down scroll button to select System Information.
Step 7 Press the Select button.
Step 8 Press the Up or Down scroll button to select SW Version.
The firmware version number is displayed.
Or if that is not working try accessing this way;
Using the Web Interface
Follow these steps to access the Cisco IP Conference Station 7936 web interface:
Step 1 Open your web browser.
Step 2 In the address field enter:
http:// IP address of the IP Conference Station:
Configuration information applies to the specific IP Conference Station associated with the IP address you enter.
Note If you changed the HTTP port number, you need to use that number as a suffix to the IP address. If you did not change the HTTP port number, then you do not need to enter a suffix.
The web interface appears, and the initial login page is displayed.
Step 3 To log in as the administrator, enter the administrator password and click Login.
The default administrator password is **#.
Note When logged in to the IP Conference Station web pages, the web pages will time out after approximately 20 minutes of inactivity. You will then have to log back in.
Step 4 To log off, click Administrator Logout.
Information Available on All Web Pages
The top right portion of the Cisco IP Conference Station 7936 web interface includes a separate section that displays consistent information for all of the web pages.
This section contains the following information; example text appears next to each item in the list:
Software Version: 3.3(2.00)
Protocol Type: SCCP
Boot Load ID: PC0503031418
Application Load ID: CMTERM_7936.3-3-2-0
IP Address: 10.1.1.11
MAC Address: 00c742655892
Local Number: 2022
As far as the VLAN issue goes, this has always been the case for our 7935's as well and I'm sure the 7936 is the same.
Switchport mode access
Switchport access VLAN XXX
Hope this helps!
Rob
Please remember to rate helpful posts........

Twist - Resolved all driver, WiFi, touch screen, version and battery issues through Windows Refresh

I would like to report that I also had many of the issues mentioned in several other posts and solved them all by doing a Windows Refresh.
In particular, the following issues were resolved:
- Missing driver for WAN miniport device
- Intermittent connectivity on WiFi
- Unresponsive touch screen (charm-swipe was not working anymore)
- Version mismatch of Lenovo Settings
The computer is now absolutely stable and faster than before. Furthermore, first impressions seem to indicate that the battery life has also been significantly increased by the refresh.
What I did:
- Performed Windows 8 Refresh
- Installed all Windows updates (several rounds of updates and restarts)
- Reinstalled all non-Windows 8 applications (Windows Refresh keeps/restores only your data and Windows 8 apps)
- Performed disk cleanup (including system files) and disk optimization
The whole process took me a good half day but was well worth it. Twist runs like a charm now, without any issues.

Windows Refresh generates a detailed list of all desktop apps that were removed during refresh. That list includes links to the manufacturer of each app and makes it quite easy to reinstall them.

Not a question -version 7 has issues with sound. Period. Admit it and put out a fix

There are known issues with version 7 and sound issues on the Iphone. Apple - please fix it.

I'm of the older generation and even posting these messages are foreign to me... however i have read several posts of this very same issue after upgrading. The phone rings but no other alerts sound. It will repair itself after reset but that is short lived. This affects ITunes as well.

Latest version of WCS - issues anyone?

Looking for general reports of performance issues with the latest version or the WCS.
Anyone having trouble with the Monitor Client features being inaccessible?
How about the web-server crashing?
Thanks,

Clients takes several minutes to display the client summary page. This occurs in 4.1 FCS when the number of events in WCS from processed traps is large. The only workaround is to patch the WCS install.

New version Flash Player Issues

I have Windows 7, and use Firefox and somtimes Google Chrome. I have nothing but problems with the new download for Adobe Flash Player. It crashes, lags very bad, and freezes up. I can not find a fix for this problem yet and I know I am not the only one having problems. Can you tell when a fix is going to be available? I have tried to go back to the older version (that worked fine) and it is not working. Thanks for any help in this matter.

Pixie, I had the same issue (as do many, obviously) - in my case Firefox 13, Google Chrome, and IE9 all froze.
I intially suspected the latest Microsoft Update, and after some web searches and talking with a local techie I uninstalled KB2699988, KB2686827, and KB2656368V2. Didn't seem to help, so after more web searches I disabled Flash 11.3 in Firefox and things worked again. So, I fully uninstalled Adobe Flash 11.3 and got 11.2.203.224 from here: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html and everything seems to be fine again. I'm thinking about reinstalling those three Microsoft Update files, but I'm feeling kind of gun shy after spending most of the day on Friday killing my computer by holding in the power button!
Try a full uninstall of 11.3.300.257 and installing 11.2.203.224 - good luck!

Created files in trail version now having issues using file in CS3

Hi Everyone,
Hopefully someone can answer my question. I don't have much experience with Dreamweaver, so any help would be greatly appreciated. I downloaded the free trail version of Dreamweaver CS5.5 and starting creating a new site with it. My trial version has ran out so I would like to finish the files using the Dreamweaver CS3 that I currently own. I'm able to open the files and move things around. However, when I went to the draw an new AP Div, I draw the box and it just disappears. The new div labeled #apDiv 7 shows up under CCS Styles panel but I can't get the actually box to show up on the screen even when changing the attributes on the #apDiv 7 under the CSS Rule Definition Box. I can create a new document in CS3 and draw an AP Div just fine. I'm just not sure why the files I created in the trail version are not allowing me to add this element to the layout.
Thank you.

First thing.When you post a question here it helps immensely if you post a link to the page or the code from it if it isn't online.
Working strictly in APDivs is hardly the way to build a page/site anymore. As you have seen it isn't easy or functional.
In the CSS panel there are attributes listed for the APDiv and should show the positioning X and Y as well as the width and height. If you go into your CS3 preferences, there is a tab for APDiv dimensions and location defaults.
But as I said, APDivs are a pain because you constantly have to adjust margins and padding to make them work with the content inside and stay where you want them, and when you're dealing with monitors between 1024 and more than 2300 pixels across, a page full of APDivs can become scattered all over the place on a wide screen browser.

ASA 5525X with 9.1(2) IOS version Memory grow issue

Hi,
So, finnaly i have installed two 5525X firewals in A/S failover.
working fine, CPU is ok.
memory behave very strange. it is growing day by day. i have a week already firewalls installed and the memory grew from 20 % to 51 %
CPU is arrounf 20- 30 % durring the day, and 3 % during the night. RAM is just kiling me. if it grows so, i will need to reload it after a week.
here is the output from the stanby firewall:
fw01# failover exec mate sh memory
Free memory:        3275200112 bytes (76%)
Used memory:        1019767184 bytes (24%)
Total memory:       4294967296 bytes (100%)
I have also attached log from show memory details

Hi,
It might be something related to SSH.
Since couple of hours i am not able to log via ssh to the router. lucky i have console to it.
I can ssh to stanby asa, strage but i was disconnected twice already from stanby.
I will disable ssh version 2.
The point is that i cannot log also via telnet and asdm (enabled them thinking it might give me possibility to log to firewall).
Related to TAC, unfortunately, my company does not have support for this firewalls. when i try to log a case to TAC, i need to secify the serial number, and cisco tells that the serial number i provide is not under support (or something like this).
I was thinking to downgrade it to 9.1.1 or to 9.0.2, but if it might not help.
There are two processes that consume memory (more allocated)
IP Background
CP Processing
I have read somewhere that CP processing includes Thread Detection and packet inspection ..... i do not have thread detection configured. i will try to remove as much inspection as i have.related to ip background, i do not knwo. last week I found a VM generated a lot of Multicast (50 Mbps) and as was droping it. after stopign the Multicast, CPU decreased, but not RAM. so, no ideas. also, i have port channel configured (g0/0 and g0/1)
I plan to restart the firewall on saturday. probably downgrade it or move it on standby. The stabdby firewall has the memory working fine.

ECC 6.0 Production version ...issue

Recently,we have installed ECC 6.0 prduction version . I have logged in as 000 client with username:sap*
and password: 06071992. However, all the modules icons are visible but not the content. I am not able to access any of the modules at all, except for staring at the icons.
      To trace the problem, I began to interact with person, who has installed it along with me. I came to know that he has copied 000 client on to 001 client, but he says that could not be the cause of the problem. As of now, I am not sure how to proceed.
could you please help me give options to deal with this problem and also give me a list of things that I should take care while implementing fresh installation. and aftermath.in real-time.(I am new guy in SAP netweaver admin area)

Hi,
         Thanks for reply. Yes, i'm not able to run transaction codes of FICO,SD,MM etc. But the thing is if we are logging into whichever client we should be able to run all the transaction codes of various modules.There are no support packages available in System-Status.Do we have to install support packages or we have to do configuration ?
Regards,
                                                                                Varinder

POI version 3.1 issue

Similar Messages

Maybe you are looking for